The resolution of my screen while on the internet is too large; and the settings are correct for the machine.

Similar Questions

• Windows makes the automatic update and my settings are only for download.

  Windows 7 - I've always had my updates the setting that allows them to download, but I chose to install them.  These past few weeks I've noticed that if I refuse and install these updates that they automatically install themselves.  I like to choose how to upgrade usually one at a time, so if there is a problem I know what update caused it.  But in recent weeks a notice that he has downloaded the updates look bad.  So when a few days where I don't bother updating automatically they settle.  I checked my setting of many times, and my settings are correct.  So why are my rules being ignored?

  Once the updates are downloaded, all that is left restarts to install updates

  Some updates that don't require not a reboot will probably install

  Hardly a way to install an update at the same time as you want too.

  I suggest you these parameters personally if install one at a time is your preference

  These settings will be updated also exclude recommended to be mixed in the important section, recommended updates cause most of the problems.

  

• I have updated to iOS to 9.3.1 now my screen is in portrait mode and will not change landscape when the phone is turned. Also, it just goes straight to voicemail without ringing on my end when people call. All I can say all the settings are correct. ideas

  Looks like my question may have been corrupted.

  I updated my phone to iOS 9.3.1 last night. Now all my incoming calls go directly to Voicemsil without ringing on my end. My sound and message settings appear normal for me. Also, my screen rotates out of sight from portrait to landscape view for photos FB etc...

  suggestions to solve problems?

  It seems that if you have the lock of portrait and do not disturb activated. Swipe up from the bottom of the screen to call the control center. Look at the two circular icons on the top right row. They are white? If so, tap on them to turn them off. One resembles a Crescent Moon, the other as an arrow in a circle with a padlock in the Center.

• The message send failed - Please verify your account settings are correct.

  I got Thunderbird established and working for years with multiple accounts. All of a sudden today, I can't send all messages in ANY of my accounts with several Web hosts. The message I get from all of them is:

  The message send failed.
  Check that your Mail & Newsgroups account settings are correct and try again.

  I checked my settings. The look that is configured in the same way they always do. I can send email with these parameters from my phone (K9 Mail on Android program.)

  All my accounts that can receive messages in Thunderbird. I get new messages and I can read them.

  If I try to save a message as a project over IMAP, I get the error:

  Unable to save your message as a draft.
  Check that your Mail & Newsgroups account settings are correct and try again.

  What could possibly change to make Thunderbird exhibit this behavior? I tried without thunderbird downgrade to the previous version and it still had the same behavior. I tried to start in safe mode without the extensions, and he had always the same behavior. Here are my troubleshooting information:

   Application Basics
  

     Name: Thunderbird
     Version: 31.7.0
     User Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0
     Profile Directory: Open Directory
  

               (Local drive)
     Application Build ID: 20150511105107
     Enabled Plugins: about:plugins
     Build Configuration: about:buildconfig
     Memory Use: about:memory
  

   Mail and News Accounts
     account1:
       INCOMING: account1, , (imap) sub4.mail.dreamhost.com:993, SSL, passwordCleartext
       OUTGOING: sub4.mail.dreamhost.com:465, SSL, passwordCleartext, true
       OUTGOING: sub4.mail.dreamhost.com:465, SSL, passwordCleartext, false
       OUTGOING: sub4.mail.dreamhost.com:465, SSL, passwordCleartext, false
       OUTGOING: sub4.mail.dreamhost.com:465, SSL, passwordCleartext, false
       OUTGOING: sub4.mail.dreamhost.com:465, SSL, passwordCleartext, false
       OUTGOING: sub4.mail.dreamhost.com:465, SSL, passwordCleartext, false
  

     account2:
       INCOMING: account2, , (none) Local Folders, plain, passwordCleartext
  

     account3:
       INCOMING: account3, , (imap) secure.emailsrvr.com:993, SSL, passwordCleartext
       OUTGOING: secure.emailsrvr.com:465, SSL, passwordCleartext, true
  

     account4:
       INCOMING: account4, , (imap) secure.emailsrvr.com:993, SSL, passwordCleartext
       OUTGOING: secure.emailsrvr.com:465, SSL, passwordCleartext, true
  

     account5:
       INCOMING: account5, , (imap) imap.googlemail.com:993, SSL, passwordCleartext
       OUTGOING: smtp.googlemail.com:465, SSL, passwordCleartext, true
  

     account6:
       INCOMING: account6, , (imap) imap.googlemail.com:993, SSL, passwordCleartext
       OUTGOING: smtp.googlemail.com:465, SSL, passwordCleartext, true
  

   Crash Reports
  

   Extensions
     Flat Folder Tree, 1.1.2, true, [email protected]
     Google Contacts, 0.7.12, true, {BDD92442-0534-4D6F-A966-BAB7D561D781}
     NoComposeAccount, 1.3.1, true, [email protected]
     Xpunge, 0.6, true, {786abda0-fd14-d247-bf69-38b2fc18491b}
     Enigmail, 1.7.2, false, {847b3a00-7ab1-11d4-8f02-006008948af5}
     Messaging Menu and Unity Launcher integration, 1.3.1, false, [email protected]
  

   Important Modified Preferences
  

     Name: Value
  

       accessibility.typeaheadfind.flashBar: 0
       browser.cache.disk.capacity: 358400
       browser.cache.disk.smart_size_cached_value: 358400
       browser.cache.disk.smart_size.first_run: false
       browser.cache.disk.smart_size.use_old_max: false
       extensions.lastAppVersion: 31.7.0
       mail.openMessageBehavior.version: 1
       mailnews.database.global.datastore.id: cbdcac30-9bd0-4a88-9a66-31a0abff554
       network.cookie.prefsMigrated: true
       places.database.lastMaintenance: 1435582206
       places.history.expiration.transient_current_max_pages: 104858
       plugin.importedState: true
  

   Graphics
  

       Adapter Description: X.Org -- Gallium 0.4 on AMD RV620
       Vendor ID: X.Org
       Device ID: Gallium 0.4 on AMD RV620
       Driver Version: 3.0 Mesa 10.5.2
       WebGL Renderer: false
       GPU Accelerated Windows: 0
  

       AzureCanvasBackend: cairo
       AzureSkiaAccelerated: 0
       AzureFallbackCanvasBackend: none
       AzureContentBackend: cairo
  

   JavaScript
  

   Incremental GC: 1
  

   Accessibility
  

     Activated: 0
     Prevent Accessibility: 0
  

   Library Versions
  

       Expected minimum version
       Version in use
  

       NSPR
       4.10.6
       4.10.6
  

       NSS
       3.16.2.3 Basic ECC
       3.16.2.3 Basic ECC
  

       NSS Util
       3.16.2.3
       3.16.2.3
  

       NSS SSL
       3.16.2.3 Basic ECC
       3.16.2.3 Basic ECC
  

       NSS S/MIME
       3.16.2.3 Basic ECC
       3.16.2.3 Basic ECC
  

  The problem was that my directory/tmp was not mounted. I don't know why it has not been mounted, but restarting the Assembly fixed.

  Thunderbird was IO error trying to create temporary files. The error messages were misleading, making me think it had to do with e-mail accounts.

• Why can't I receive emails in Thunderbird on my new Macbook Pro, but can send OK? All the account in Mozilla Thunderbird's settings are correct.

  I created an account in Mail, which now works, and Mozilla Thunderbird. The settings are correct, but Tbird doesn't e-mail, even if it sends OK. I run iMac, MacBook and just bought MacBook Pro OS X 10.9.2. All other computers work fine. I want to rule out all other computers and to use my new, but at this rate I can't move as I had hoped. I like Thunderbird and want to continue using it.

  I spent hours with Apple chats a whole bunch of questions and especially to fix them, but this one. I searched online conversations, support Mozilla, but have found no answer. I hope someone can help without using the technical language.

  Thanks in advance.

  Please mark this thread as "Resolved" when your issue has been resolved.
  
  Thank you.

• My photos aren't going to the photo gallery. All the settings are correct. iPhone 5 s

  iPhone 5s does not load the photos to photo streams. All the settings are correct.

  It loads new photos - try to take one and see if it goes to the cloud

• I have updated to ios 9.3.1 now I have no sound for text messages alerts and alert sounds no calendar! I just missed a meeting disaster. Any ideas how to solve this problem, all the settings are correct.

  I have updated to ios 9.3.1 now I have no sound for text messages alerts and alert sounds no calendar! I just missed a meeting disaster. Any ideas how to solve this problem, all the settings are correct.

  Try a reset...

  Force restart your iPhone: tap on and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  If this does not help, tap settings > general > reset > reset all settings

• My date and time settings are set in Egypt and whenever updates of the laptop with microsoft server time, it increases of 1 h.

  My date and time settings are set in Egypt and whenever updates of the laptop with microsoft server time, it increases of 1 h.
  Recently in Egypt, changes of daylight has been cancelled and I guess that's the cause of the problem!
  Any ideas?

  If time was recently cancelled, you can go to your control panel:
  Panel-> data and time-zone (tab) >
  and uncheck the "automatically adjust clock for daylight saving time.

  Otherwise, you probably need to adjust your zone settings on your computer using Microsoft time zone Editor.

  TZEdit: <> http://download.microsoft.com/download/5/8/a/58a208b7-7dc7-4bc7-8357-28e29cdac52f/tzedit.exe >

  HTH,
  JW

• Can send email from Windows Live, but cannot receive. The settings are correct with Comcast.

  I cannot receive emails in Windows Live but you can send.  The settings are correct, according to Comcast.

  If your settings are not as shown here, they are not correct. With Comcast tech support, which wouldn't surprise me in the slightest.
   
   
  Configure Windows Live Mail 2011/2012 for XFINITY/Comcast email
  http://customer.Comcast.com/help-and-support/Internet/configure-Windows-Live-Mail-2011-for-Xfinity-email 
   
   
   
   
   
   

• New computer Windows 7 keeps waking my Brother printer, do not own, all the settings are correct on the printer?

  My new Acer computer with Windows 7 continues to wake up my Brother MFC J625DW printer, has done that with my old XP unit, does not not a clean place and all the printer settings are correct and identical forward can help them a whole?

  Hello

  I have a Brother printer and for now, it is not the same installer and it lights up occasionally. I think so
  This cleaning the inkjet.

  Mine is an all-in-one Brother MFC-J825DW.

  Maybe there is a setting in the Setup/properties of the printer driver be awakened.

  The answer will come from brother.

  Rob - SpiritX

• Can you please put me in touch with support for the trial version of adobe acrobat pro XI that I had tried on 15 March for 30 days. I tried to cancel because the cost is too, and Acrobat Reader are good for me. I can't uninstall program.

  Can you please put me in touch with support for the trial version of adobe acrobat pro XI that I had tried on 15 March for 30 days. I tried to cancel because the cost is too, and Acrobat Reader are good for me. I can't uninstall program.

  I had to wipe my drive since then with the trouble with Apple Store without acknowledging my machine and Time Machine reloading gave complications. Can you please cancel my trial and make my money from trial.

  Hi jack gordon.

  Adobe does not charge for the 30 day trial, but it seems that you have subscribed to Acrobat Pro (as a simple app for creative cloud membership) return March 15. To cancel your subscription, please contact customer service.

  Please let us know if you have any additional questions.

  Best,

  Sara

• The content on my screen is too large, and it happened during the night can help you

  The content on my screen have suddenly become huge, don't know why, perhaps another user at home doing something and does not want to admit.  I have no idea what to do; However, as I write this, this page seems normal.  but most of the other sites are huge and can not see full screen.  Any help will be appreciated.

  Gail

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  "Change screen resolution".

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  For example, 640 × 480 is a lower screen resolution, and 1600 × 1200 is higher. CRT monitors generally display a resolution of 800 × 600 or 1024 × 768. LCD monitors can better support the higher resolutions. If you can increase your screen resolution depends on the size and capability of your monitor and the type of video card you have

  See you soon.

  Mick Murphy - Microsoft partner

• When I bring up Firefox it asks me to make sure that the Proxy settings are correct. What are the proxy settings?

  When I double click the icon of Mozilla Firefox to open up an error message appears and says "the Proxy server refuses connections" check the proxy settings to make sure they are correct. Contact your network administrator to make sure that the proxy server is running.

  Please help me with this.
  Thank you

  Try the following and any parameter works, keep it Permanent:

  (1) go to the Menu Tools-> Options-> advanced-> network-> click on the "Settings" button... "in front of connection-> select option 1-> click OK-> OK

  (2) go to the Tools Menu-> Options-> advanced-> network-> click on the "Settings" button... "in front of connection-> select option2-> click OK-> OK

  (3) go in the Tools Menu-> Options-> advanced-> network-> click on the "Settings" button... "in front of connection-> select option3-> click OK-> OK

  Check that the solution works.

• Need confirmation that my streaming rtsp for the WVC54GCA settings are correct

  I have therefore recently implemented the WVC54GCA for viewing remotely via internet. I use Verizon DSL Westell Versalink 327W bridge, with the latest firmware (4.4.3) I was able to transmit an alternate HTTP port (1025), which allows the two TCP/UDP to my static IP of cams. I was also able to transfer the RTSP port (554), which allows the two TCP/UDP to my static IP cam. My problem is that my router will not forward any additional ports other than 1025 and 554.

  There is a setting on the camera for RTP data port (ranked from port 5000) and I can't transfer port 5000. I tried to change the setting of the cam to a bunch of different other than 5000 ports (6881, 1024, 1900, etc.), but no matter what I try, no other ports can be opened through my router. It seems to work via routers firmware (i.e., it looks like fixing to 1025 and 554, which advance) but when I check the port using canyouseeme.org or RCMP the port is classified as closed or camouflaged.

  I am able to view the cam of my office at rtsp://camname:554 / xxxxx using Quicktime or Realplayer.  However, neither my phone nore my friends can connect.

  My question, since I can see the flow of mobile streaming outside my local network using Realplayer or Quicktime, is "am I configured correctly for mobile (rtsp) streaming?  What is a cell phone rather than a problem of configuration problem?

  Sorry for the post above, I confirmed that my cam is correctly mobile video streaming.  The video stream has been consulted using a Samsung Omnia and Blackberry Curve.

  I am now home and confirms that, even if I've implemented port 5000 port forwarding, this port is listed as closed via canyouseeme.org.  The power supply works well, so I'm happy.

• Try to activate Vista's problem reports, but get the message "Windows incident reports are disabled." and some settings are managed by your system administrator

  Original title: trying to activate the Vist problem reports, but get message "Windows problem reports are disabled."

  "Windows problem report is disabled." I can't activate the problem reports and Solutions on my Windows Vista computer.  When I click on "Change settings", I would be prompted with the following message if poster "some settings are managed by your system administrator."  It's personal PC at home.  I don't know how to activate it.  I already went to political group & register to adjust some settings.  But still unable to activate this.

  All settings are disabled as this.

  This problem only recently.

  Method 1

  System Restore does not work.

  Method 2

  Disable the antivirus software does not work.

  But after some research, I realized that the problem could be due to a recent installation of a PC anti-frustration software called Soluto (the star was "Activate Crash Handler Soluto").  It worked after that.  After uninstalling, I rebooted the PC system.  After the reboot, I checked the reports on the problems and Solutions and found I could now adjust advanced settings.  I have also reinstalled the software, Soluto and ensured that this time, "activate Crash Handler Soluto" not was not checked (i.e. enabled).