Similar Questions

• I get the error ' file \i386\ntkrnlmp.exe could not be loaded error code 32768 is Setup can not continue "when you try to reload windows xp on a computer problem. What should I do?

  I'm trying to "sweep" and reinstall windows XP pro on a computer that has had problems. I get the error ' file \i386\ntkrnlmp.exe could not be loaded error code 32768 is Setup cannot continue to press a button to exit "as soon as I got the boot from the cd (and actually after a long break). Help, please!

  Hello

   
  Try the steps listed in the link below and check if it helps:

  "Ntkrnlmp.exe could not be loaded. The error Code is 7 "Error Message occurs during installation of Windows: http://support.microsoft.com/kb/318729

• Create PDFs in Word 2013 gives, the error "Server Acrobat PDF Maker could not be loaded"

  Cannot create/save a PDF in Word because of the error.

  Acrobat PDF Maker Server could not be loaded

  You want to run the installer in repair mode?

  
  

  I tried following the instructions to run the installer in repair mode, but it did not help.
  

  It's Office 2010 installed locally. I'm not a PC so I can't check the exact version of Acrobat, except to say that it is a newly installed domain controller Acrobat.

  However, we have solved the problem to our satisfaction.

  The problem was with conversion/recording with the builtin pdf Converter in Word Help.

  Conversion using the addin Acrobat worked.

• The Adobe Extension Builder 3 works to run a project in Photoshop CC2015.5 without getting "the extension could not be loaded because it was not properly signed.

  Hello world

  The Adobe Extension Builder 3 works to run a project in Photoshop CC2015.5 without getting "the extension could not be loaded because it was not properly signed"?

  OR

  Is there a way to convert my panels that works perfectly in CC2015 up to the CC2015.5version?

  I hope someone can give a solution, because everything that I could find were unanswered questions.

  Thank you all for your generous contribution

  Stone

  You have set the indicator of debugging for 2015.5 CC: HTML Panel advice #21: Photoshop CC 2015.5 survival guide | Photoshop, etc ?

• I recently upgraded to Photoshop cc (2015) and Windows 10.  Now I get error messages - "the extension of com.adobe.preview.loader could not be loaded because it was not properly signed.  And when I try to open a dng file, it comes up with "cannot be compl

  I recently upgraded to Photoshop cc (2015) and Windows 10.  Now I get error messages - "the extension of com.adobe.preview.loader could not be loaded because it was not properly signed.

  When I try to open a dng file, it comes up with "could not complete your request because it is not the right type of doc.  Now I have "expansion of libraries could not be loaded because it was not properly signed.

  Any help would be greatly appreciated.  The program worked perfectly in the past.

  I contacted Support Adobe this morning, and they were able to solve the problem.  It was difficult.

• "Cannot complete order because the extension could not be loaded." with the sample CEP5

  Hello

  I have trouble with my extension porting to CEP5. I get the error message "Cannot finish order because the extension could not be loaded." when I open the Panel.

  Is it possible to get more information about what happened and why? My post was properly signed zxp and managed Extension installed without problem.

  Also, to debug the problem, I tried to open the Test HTML CEP Extension - https://github.com/Adobe-CEP/Samples/tree/master/CEP_HTML_Test_Extension_5.0

  I copied on '~/Library/Application Support/Adobe/CEP/extensions/com.adobe.CEPHTMLTEST ", created .debug inside (https://gist.github.com/m6k/39a49786b7a85a9e312b), empty the file inside Photoshop CC 2014.app .debug (to remove the verification of the signature). When I open Photoshop CC 2014, I see test listed in menu extension panels, but when I try to open them, I also get the error "cannot complete order because the extension could not be loaded.".

  
  

  No reference to what I'm doing wrong and what I can do to debug this problem?

  
  

  Jan
  

  Please read this: Adobe Extension Builder and Creative Cloud 2014

• whenever I re - start the computer I get this error: could not load the file nta0104.dll.

  "original title: NTA0104.dll.

  whenever I re - start the computer I get this error: could not load the file nta0104.dll. How can I fix?

  HM

  Hello

  Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• ERROR 2: The class or interface 'Event' could not be loaded.

  Hey, I'm new to the Forum and I have problems with Flash that comes, I can't fix. I have this error that tells me how "the class or interface 'Event' could not be loaded. The error is on the 5th line of code:

  1 stop();

  2

  3 addEventListener (Event.ENTER_FRAME, preLoad);

  4

  5 function preLoad(e:Event):void { }

  6 var bytestoLoad: Number = loaderInfo.bytesTotal;

  7 var numberLoaded:Number = loaderInfo.bytesLoaded;

  8 if(bytestoLoad == numberLoaded) {}

  9 removeEventListener (Event.ENTER_FRAME, preLoad);

  gotoAndStop (2);

  } else {}

  _root.preLoader.preLoaderFill.scaleX = numberLoaded/bytestoLoad;

  _root.preLoader.bytesPercent.text = Math.floor(numberLoaded/bytestoLoad*100) + '% ';

  }

  }

  I know that the code is AS3, but I can not pass by atm AS3 and I need the same code, but for AS2. So, can someone convert this for me? Moreover, it is supposed to be a preloader and I put this on the 1st frame. So I have extensions (.as), just the .fla file.

  Also, I use the newest Flash, Adobe Flash CS6.

  The Flash version has nothing to do with the things works or not.

• The class or interface 'mx.remoting.Service' could not be loaded.

  Flash 8 has been reinstalled on a new update of the machine. Application using flash remoting may not be updated after this new Setup error when you try to publish the application is:
  The class or interface 'mx.remoting.Service' could not be loaded.
  is it because I don't have the "Flash Remoting for Flash 8 ActionScript 2.0" extension installed?
  and if so do I have to re buy this or it can be reinstalled from the old hard disk of the machine replaced? wouldn't be a *.mpx file?
  The application works, but I can not publish any new changes without getting that error. and this has started since my machine has been updated... so I hope that this is the problem...
  Thanks in advance...
  Chuck
  

  Flash remoting components are on the site of adobes by download here

• I've recently updated my Apple ID (including the change of password). However, could not connect to iTunes to update the applications or make purchases. Any help?

  I've recently updated my Apple ID (including the change of password). However, could not connect to the iTunes Store to update the applications or make purchases. Any help?

  Have you tried a forced reboot? Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. You won't lose anything.

  Then sign out of the iTunes Store and reconnect.

• Upgrading to Windows 7: compatibility of the device data could not be loaded

  I tried to upgrade my L300 (and otherwise my P300) from Vista to Win 7 with two DVDs of upgrade provided by Toshiba end 2009. I followed all the instructions, as to recover the system to the State of delivery, deletion of outdated drivers and install new drivers with the DVD driver. But when I insert the Win 7 DVD and start the installation, I soon get the following (originally in German) error message:
  "The device compatibility data could not be loaded. Error code 0x1F.*.
  German support Toshiba could not answer my question so far, then I wonder what is the problem and how do I get my installation is going. It's kind of frustrating after paying for the upgrade DVD, but the installation does not work.
  Thanks in advance for any help on this error.

  And after a year using it for the first time now, right?

• Automator action "CVS Update" could not be loaded because the file ' / usr/bin/cvs "is not found.

  Hello

  I just receive my MBA a few weeks ago to Apple and noticed my Razor mouse worked only with BluTooth but not when it is plugged into a usb port.  Other mouse usb and external drives readers work well.  Razor support told me the plug-and-play subsystem has screwed up, and errors have been associated with Automator.

  I have only a local account and I have not linked to the iCloud account.

  I don't want to reinstall my laptop because I have 300 GB of data on it, as well as some programs that I installed.

  I think that a package is not properly installed or missing, but my OSX knowledge is poor, because I have just started using a Mac!

  Sophies-MacBook Darwin kernel version - Air.local 15.2.0 Darwin 15.2.0: Fri Nov 13 19:56:56 PST 2015; root:XNU-3248.20.55~2/RELEASE_X86_64 x86_64

  Error are usually refers to a/usr/bin/cvs binary missing, and he's not here.

  # ls-l/usr/bin/cvs

  LS: / usr/bin/cvs: no such file or directory

  Some key messages,

  The "CVS Update" action could not be loaded because the file ' / usr/bin/cvs "is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "Filter iPhoto items" cannot be loaded because the "iPhoto" application not found.

  Someone would let me know how I could diagnose it and perhaps repair?

  Best regards, Sophie.

  System.log reported,

  [dec 19 10:33:59 - Sophies - MacBookAir loginwindow [99]:-[SFLListManager(ServiceReplyProtocol) notifyChanges:toListWithIdentifier:] notified of changes of the list element with the identifier com.apple.LSSharedFileList.RecentApplications

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: the "Add movie to iDVD Menu" action could not be loaded because the application 'iDVD' not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Add Photos to the Album' could not be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'CVS Add' could not be loaded because the file ' / usr/bin/cvs "is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: "CVS Checkout" action could not be loaded because the file ' / usr/bin/cvs "is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'CVS Commit' could not be loaded because the file ' / usr/bin/cvs "is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: "CVS Update" action could not be loaded because the file ' / usr/bin/cvs "is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "Filter iPhoto items" cannot be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: the "Find items from iPhoto" action cannot be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Get iDVD slideshow Images' could not be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: the "Get Selected iPhoto Items" action cannot be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: 'Get iPhoto features' action cannot be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Import files in iPhoto' could not be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Launch of remote broadcasting' cannot be loaded because the application "QuickTime Broadcaster" was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "IDVD New Menu ' could not be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "IDVD new sequence in the film ' could not be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "IDVD new slideshow ' could not be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "IPhoto New Album ' could not be loaded because the"iPhoto"application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: "New QuickTime slideshow" action could not be loaded because the application "QuickTime Player" is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Play Slideshow iPhoto' could not be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Photos of the magazine' could not be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: 'Set Background Image iDVD' action cannot be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Set iDVD button face' cannot be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Set Annotations of film' couldn't be loaded because the application "QuickTime Player" is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Set the properties to read film' couldn't be loaded because the application "QuickTime Player" is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Set the movie URL' could not be loaded because the application "QuickTime Player" is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "See the iDVD Menu hand" could not be loaded because the application 'iDVD' was not found.

  dec 19 10:34:13 Sophies - MacBook - Air SpotlightNetHelper [301]: tcp_connection_tls_session_error_callback 9 __tcp_connection_tls_session_callback_write_block_invoke.434 error 22

  dec 19 10:34:13 Sophies - MacBook - Air SpotlightNetHelper [301]: 8 22 tcp_connection_tls_session_error_callback __tcp_connection_tls_session_callback_write_block_invoke.434 error

  dec 19 10:34:44 - Sophies - MacBookAir syslogd [48]: sender ASL statistics

  P.S Xcode is installed from the app store.

  and MacPorts is installed.

• Error opening a VI (LabVIEW: unable to load dynamic library due to lack of external symbols or dependencies, or a format file not valid.) The file could not be loaded)

  Hi all!

  Yesterday, I worked all day in a VI and today, unfortunately, I'm frustrated when I tried to open it. Received the following error message:

  LABVIEW: Unable to load dynamic library due to lack of external symbols or dependencies, or a format file not valid. The "ENG633 v1.vi" file could not be loaded.

  This message repeats when I try else open a Subvi.

  Step by step:

  1. I created a copy of the LabVIEW VI example: "FuzzyEx Tanks with control of PI." I kept the copy in the same original directory.

  2 - I have edited the copy, created Subvi etc.

  3 - once I finished my course of programming I closed all the cut (ctrl-x) files and copied (ctrl v) into the other folder.

  4. then I tried to open the next day and... bug! I just couldn't do

  What can I do to open/recover the VI?

  I am using 32-bit LabVIEW 2016 in a Windows 10

  I tried opening them and got the same error you did, so I them opened with a hex editor to see if there was something in the file, and there is literally nothing other than the value of 0x00 for the entire file.

• During the installation of Windows, shows that an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. Error n ° 302

  An error internal occureed in the initialization stage. The application could not be loaded. Please contact the vendor of the application. Error n ° 302

  original title: an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. Error n ° 302

  Hello Stephen,
  try to run the "Startup Repair" utility located on your installation DVD.
  hope this helps
  Eddie B.

• When I insert a compatible game must be installed and the alert arrives to allow another comes in and says "the file 'Localization.xml' could not be loaded."

  When I insert a compatible game must be installed and the alert arrives to allow another comes in and says "the file 'Localization.xml' could not be loaded."

  Hi Scarface0721,

  Welcome to Microsoft Answers Forums.

  We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

  (a) game in which you try to read?

  (b) have you been able to install and play the game before?

  (c) you are trying to install the game to your computer from the disk or directly trying to play from the disc?

  Method 1:
  Try to install and play the game in a different computer.

  Method 2:
  Try another disc and verify if you are able to install the game.

  Method 3:
  You can also post your request in the following forums site.

  http://forums.gamesforwindows.com/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.