The RPD and presentation services

Similar Questions

• 1 error windows must now restart because the plug-and-play service taken end unexpectedly__error 2 - windows must now restart because the DCOM Server process Launcher service put end unexpectedly__

  1 error windows must now restart because the plug-and-play service terminated unexpectedly
  error 2 - windows must now restart because the DCOM server process Launcher service terminated unexpectedly
  -every half an hour or 45 minutes such error comes and restarting the laptop... How to solve this problem...

  Hi nevil.fidelis,
   
   
  This seems to be a common problem, I recommend you to follow the discussions below and check if it helps.

  You can follow the procedure posted by Bindu RMicrosoft support, Moderator on Sunday, 24 January 2010, at 20:04.
  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/ea20a793-5fe8-4448-9fa2-c3ef45069b87

  For additional help please refer to the following thread also:
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/aa3373fa-836D-43f2-BCFC-6e566553c818

  You can also check the positions of the TCD in the thread below on
  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/0f1a049c-4852-4321-91d7-dc1255f4d7a4
   
  Consider the response posted by Karena R, Moderator Thursday, December 31, 2009 at 01:28
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/aa3373fa-836D-43f2-BCFC-6e566553c818

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• restart Windows, because the plug-and-play service ended unexpectedly

  Windows restart because the plug-and-play service terminated unexpectedly. After that this mesege pc stops.

  Hello

  Check what is causing the problem by following the steps in this link: support.microsoft.com/kb/929135

  Perform the online scan if the problem persists: http://onecare.live.com/site/en-us/default.htm

  James

• Through the Oracle BI Presentation Services filters go URL via a URL

  Hi expert,
  We ara uses a function called "filters to the Oracle BI Presentation Services go URL via a URL."
  However, we are facing a problem that how to pass the value "all" in the reports.
  For example:
  We have a command prompt that contains some values:
  All the
  China
  America
  ..... (lots of data)
  
  
  In Url go:
  When you click a value:
  Saw.dll? Go & Path = / Shared/Test/SB2 & Action = Browse & P0 = 1 & P1 = eq & P2 = Customers.Region & P3 = 1 + China (it's a correct result which display the data of China)
  
  When users click any value:
  Saw.dll? Go & Path = / Shared/Test/SB2 & Action = Browse & P0 = 1 & P1 = eq & P2 = Customers.Region & P3 = nqgtac 1 + "*) (*" (our result shows all the data, but does not show any results) ")"
  
  We know reports don't have all the data, so it displays no data.
  How to implement this requirement?
  Are you facing the same issue? I thank.

  OK, got it.
  In your case means "(tous les choix)" in the prompt of the ordinary. "

  In this case, try don't past not any value for columns in the url, it should be something like
  Saw.dll? Go&path=/shared/test/SB2&action=navigate&p0=1&P1=EQ&P2=customers.region
  In this case for P3 is going to be all the choices
  You must validate the values selected to submit the form.

  OR GOOD
  You can move % using one of these coasters that documented such conditions

  CANY contains one (values & P3).
  call contains all (values & P3).
  as you type % 25 instead of the usual % wildcard. See the following examples

  Published by: svee on August 6, 2012 16:59

• Unable to see the user in presentation Services

  Hello
  I created a user in OBIEE administrator but I don't see the user when I go to the Administration of the Referral Services. All the world is facing this problem?
  
  
  Thank you

  If you need to set the security permissions on the user who is logged in to create a group in the administration tool that points to the USER variable and create the group even in presentation services to set relevant privileges in this regard. In this way the LDAP user would inherit all the security features set for the group to which it belongs once it connects. If you do not need to set privileges on the user, then you have no connection as an LDAP user. In order to see the users, it should be possible that when the user logs in for the first time after the LDAP authentication.

• What are the networkservice and Local service folder in Windows XP

  Original title:networkservice.nt instants

  I had a few Win XP Pro SP3 which has 'documents and settings' folder with the name 'networkservice.nt instants' or 'localservice.nt instants.

  What is this folder used for and can I delete them?

  Hello

  The network service and local service record are system files that are hidden.

  The Network Service file is and hidden in Windows XP Documents and settings folder and it's a case of temporary storage for network services.

  For more information on the local service file click on the link below.

  http://msdn.Microsoft.com/en-us/library/ms684188

  Note:

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

• Failed to connect to the Windows and WLM service does not

  Hi, I hope someone can help me.  When I turn on my laptop the message "unable to connect to a Windows service.  Windows could not connect to the Group Policy Client Service... "That would be the reason I can access is no longer my Windows Live Mail 2011?  I hope you can help, I did no progress so far with someone or something...  Thank you I have upgraded from Windows 7 to Windows 10 a few weeks ago.

  Hello Richard,.

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  For the Customer Service of Group Policy error, please refer to the suggestions of P.L.X. responded on February 2, 2013 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/why-wont-Windows-connect-to-the-Group-Policy/b73107f8-8447-4599-87a5-65ecc6a63aa0

  For cause of Windows live mail , I suggest you use the steps in this article and check if it helps.
  Reference:
  Windows Live Mail stops responding or does not start after the installation of KB2454826
  https://support.Microsoft.com/en-us/KB/2505524

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• turn off the demons and optional services

  Hello
  I have Oracle database 11g r2 installed in Oracle Linux 5 (no GUI) in my laptop.
  I want to disable all optional services and the demon, and keep just required to run the oracle database.
  
  Published by: 956369 on 3 Sep 2012 15:19

  The oracle database has no need of these services

  The operating system can depending on the services you have installed or require. If you don't need any NFS or other rpc network services, you can stop portmap rpc.statd, xinetd, rpc.idmapd for example. You can probably disable pcscd if you don't need smart cards. You can probably disable the iscsi demons and xfs support. You can stop these services and then see if you still need to work. However, I doubt that it will be a lot of influence on the use of resource or overall performance of the system.

• Date show invites by using the calendar and presentation Variables

  Hi all
  
  That's what it takes...
  
  I need to create a two prompts (from_date and to_date) on a date column so that I can filter the data by using a condition. This is how I do
  
  I created two guests (edited the formula) and passing values to two variables var_from and var_to presentation. In the report, I limit the query on assistance between motor coaches for both the presentation variable. Everything works fine but the problem is I need display var_from and var_to in my report also.
  
  I'm referencing variables like ' @{var_from}' and ' @{var_to}' but I get two columns as white. I don't really know why I get empty values for these two columns only when I am able to filter my report with success on the basis of the date values in the guests...
  
  Just to metion... in my database, I have values in m/d/yyyy format only. So I am able to use the calendar successfully
  
  Any help on this would be much appreciated...
  
  
  Thank you
  -Ronny

  Ronny,
  Drafts of answers do you see? ID wait, but on the dashboard when you set filters, you should see values that crosses?
  You can extend the syntax of the variable closely and provide a default value, so when you work in the answers you can see what it looks like,

  something like @{var_from} {January 1, 2010 ""}

  Also you can reference variables in the title, the subtitle or the narrative views if you want.

• Creating user in the repository and Presentation Server

  Hello
  
  I created for OBIEE users in the administration tool, but I don't see users in the list when I want to add to a group on the presentation server. First of all, I need to log on to the server of presentation with this user to be able to add it to a group. The problem is that I have 150 users and I do not intend to log 150 times.
  
  Is there an easier way to do this?
  
  Kind regards
  
  Osman

  Hi Osman,

  strange error message, I have no idea why get you. You rebooted the Oracle BI server and presentation?

  Kind regards
  Stijn

• How to close programs that are running in the background and what services are safe cut

  under windows xp with sp3, I hear something running in the background, but no photo with her, how I close it, also how do you know which windows services are safe to clog then start and stop can be a little faster?

  For performance tweaks that I would recommend looking at http://www.tweakxp.com/performance_tweaks.aspx they have a great compilation of good settings you can do and more are step by step, so even the most novice person can perform these tasks. Insofar as something running in the background of his always possible, you have some kind of malware running I want to run a scan for these emissions.

• Creation of the form and presentation

  Okay, I'm taking a pdf form that the customer has created, post on the site for download and filled, and then to send the PDF back to the client. Right now, he sends an xml file which we cannot open with acrobat. We are usomg Dreamweaver and Acrobat CS4

  The XML file is imported into the form. Open the form in Acrobat and the import of the data file. Submit the PDF form is a matter of license and requires the reader rights be enabled (the aspect of licensing restrictions). In addition, depending on your use, presentation of e-mail will likely fail for some users due to their configuration of the machine. The best presentation is a web script, not an e-mail.

• Can multiple users access the account and use services on different computers?

  ?

  Hi vighter,

  A subscription is related to an individual Adobe ID and password. The license agreement allows this user to access the subscription on up to two devices, but not at the same time.

  Best,

  Sara

• Presentation of the OBI and Services Server will not start

  Hi all
  I have a problem with the OBIPresentation and OBIServer services, cannot be started.
  I copied the logfile as below;
  
  [ERROR: 10] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid:] [tid:] Odbc driver returned an error (SQLDriverConnectW).
  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred.
  [nQSError: 73006] Failed to get from the main Cluster controller (localhost) or secondary () specified for the DSN Oracle BI server cluster Cluster controller. (HY000) [[
  Leader: odbcuserpoploaderimpl.cpp
  Online: 324
  Geographical area:
  Saw.Security.odbcuserpopulationimpl.Initialize
  saw.catalog.local.loadCatalog
  Saw.Subsystems.catalogbootstrapper.loadcatalog
  Saw.webextensionbase.init
  Saw.sawserver
  ECID:
  ]]
  [2013 04-22 T 16: 18:46.000 + 03:00] [OBIPS] [ERROR: 16] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid:] [tid:] cannot create a user to BI Server connection when you start. Try again. [[
  Leader: odbcuserpoploaderimpl.cpp
  Online: 325
  Geographical area:
  Saw.Security.odbcuserpopulationimpl.Initialize
  saw.catalog.local.loadCatalog
  Saw.Subsystems.catalogbootstrapper.loadcatalog
  Saw.webextensionbase.init
  Saw.sawserver
  ECID:
  ]]
  [2013 04-22 T 16: 18:51.000 + 03:00] [OBIPS] [NOTIFICATION: 1] [,] [saw.sawserver] [ecid:] [tid:] Oracle BI Presentation Services are shut down. [[
  Leader: sawserver.cpp
  Online: 698
  Geographical area:
  Saw.sawserver
  ECID:
  ]]
  
  Do you have any suggestions?
  Thank you...

  Follow this downgrade the RPD http://obieedeveloper.blogspot.com/2012/07/how-to-downgrade-rpd-from-11116-to.html

• Need to share the folder for the presentation service more on a physical machine?

  Dear gurus,
  If I want to evolve several instances of service presentation on a physical machine, still need to define the share of network for the Catalogs folder? Can I just specify a folder on local disk for them?
  
  Thank you!
  Michael

  Hello

  Yes.Shared Directory required for the RPD and the Web catalogue.

  For more information, see
  http://docs.Oracle.com/CD/E23943_01/bi.1111/e10541/cluster.htm#BGBCCEGA
  http://www.rittmanmead.com/2010/08/Oracle-BI-EE-11g-vertical-clustering-fault-tolerance-multiple-bi-servers-in-a-box/

  Thank you
  Deva

  Published by: Devarasu on July 26, 2012 17:10