The safest way to root Iconia A1 830?

Similar Questions

• The safest way to Flash the BIOS?

  What is the safest way to Flash the BIOS?

  I know, starting when cold, remove all devices usb, LAN, WLAN, close all applications...

  Perhaps, in addition, Safe Mode might be safer?

  Or a new installation without pilot system is perhaps better?

  The best way to update a BIOS done upgrade under the DOS environment. This is because the nature of the system of the device itself (he has no protection).

  If you want flash on Windows just restart your computer (do not sleep your computer once restarted), disable any anti-malware software and close all open windows.

  You can also try to flash in Mode without failure, but I do not recommend it, because in this mode, Windows disables all its services. Not sure if the BIOS update need to package one of them (a priori that it isn't).

  Best regards.

• What is the safest way to get back to Windows 7 from Windows 10?

  Windows 7 Edition Home Premium.  Open windows yesterday and it is automatically upgraded to Windows 10. To my dismay, some of the files just disappeared. I do have Windows 10!   What is the safest way to get back to Windows 7?   Restore help?

  Hello

  first go to your c drive and find the folder called windows, old.

  In this folder, you can find all your documents, photo ect. who are on your windows operating system 7.

  I suggest to first make a backup of the files you want to keep on an external drive or a drive of Pentecost copy paste, to be sure of not lost.

  to return to your old windows 7:

  go to settings - updated and security - recovery - get back into windows 7

  more information:

  https://www.YouTube.com/watch?v=EOzfv6qszuo

  and

  http://www.CNET.com/how-to/Windows-10-how-to-roll-back/

  But what I said before its good to first make a backup of all your important files.

  Ty edje

• 5.1 - the safest way to stop ESXi has blade

  What is the safest way to stop a blade for maintenance?

  I know I need to migrate all the VM of the blade which must be cut before the blade stop.

  Next week, I need to stop (one at a time) all 3 three of my blades M620 of Dell (Dell VRTX) for adding more physical RAM.

  Thanks in advance.

  Just do the following:

  1 put the host ESXi on Maintenance Mode... This will migrate all virtual machines to another host in the cluster DRS ina if DRS... If there is no DRS you must move all virtual machines manually.

  2. judgment of the host by using the option "Stop" on vSphere Client or F12 on DCUI;

  3. add more; physical memory

  4. power on the host computer and only after checking that the new memory is detected, remove the host in Maintenance Mode.

• The safest way to remove the storage

  I caught a thread several days ago, but I want to start a new. What is the safest way to remove a data store? Poster said that it removes the lun from VCenter. An answering machine for the post explains how VMware and Cormac advise unmount and detach and then they did not, but the lun would be then deleted on the side of the table. Is one better way rather than the other? VMware recommends unmount and detach because the removal of the lun has too much IO in the table? Maybe he's zeroing in on the blocks?

  I have 12 MON I have to shrink, but I obviously can't. I need to re - create. I then am curious about the best way for me to remove hosts. Delete vmfs, or remove/detach. After each of them, both of course would need to have the table to remove guest access to this device/lun.

  According to me, it seems logical to me if:

  (1) remove the data store, if you want to get rid of the LUN (followed by deleting on the side of the table)

  (2) delete the data store, if you want to get rid of its content, but want to reuse the same LUN by recreating a new store of data on it.

  My experience is too limited to comment on the possibility of entering ODA in scenario 2 (followed) by removing the logic unit number, but we can say that scenario 1, simply works.

• The safest way to uninstall non-strabisme - so previous settings restored?

  Hello
  What is the way easier and safer to uninstall NON-STRABISME so get him restore the previous settings?

  I noticed the button DELETE in the Menu-ADD-ONS, but want to ensure that my previous settings cannot be modified.

  I have now found to be incompatible with classical YahooMail NON-STRABISME, so I'm desperate to uninstall. For example, it caused my DELETE-MAIL button to disappear.
  
  Note that classic will work only on my disabling JavaScript, which could account for the above-mentioned incompatibility.
  

  P.S. FYI the New Yahoomail is so horrible, I feel paralyzed without classic. Not that this is the original classic (the classic meat version sucks as well, but not as bad as the tyrannical new version.)

  This extension should not cause problems after uninstall you it via the add-on to Remove Manager button. But if there is any questions later, you can open Subject: config and reset both preferences below, via the context menu for each preference. Once you restart Firefox the NoSquint remaining prefs will be gone.

  https://urandom.ca/NoSquint/#FAQ
  of NoSquint FAQ

  Q. where NoSquint stores all of its settings at each site?
  A. NoSquint all settings are stored in your Firefox profile, specifically in the prefs.js appearing in your Firefox profile directory. Preferences are prefixed by extensions.nosquint. Each site's settings are stored in the extensions.nosquint.sites key. These can be easily viewed in topic: config (type it in your address bar).

• What is the safest way to upgrade to Windows 10 and save my email folders

  I have been using Thunderbird to check my account Gmail for years, I have 15 years of records by year and month, I want to upgrade to Windows 10 but I'm afraid of losing this email, addresses, etc. Is there a safe procedure to do. I have back ups of my computer everything on several hard drives, I use Acronis to make my back ups, could simply use Acronis to re - install the backup of files that include my email?

  Thank you
  God bless you
  Fromjim

  It depends on if you have moved the default Thunderbird profiles locations and firefoxes.

  If they remain in their default locations in appdat.

  Type %appdata%\protector.exe in the search box for the start menu and press to enter.

  Copy the Thunderbird and the Mozilla files to your backup device.

  If you have changed the default settings, I guess you know where you have placed these data.

• What is the safest way to clean most of the files on my computer. I want to do before upgrading to Windows 7.

  need help to upgrade my vista to 7 thank you I want to delete a lot on my computer

  I want to clean my computer upgrade b4, but I want to do it safely

  If you want to clean a lot off your computer, installation of cleaning / custom Windows 7 would probably be your best option.  Read the information here: http://windows.microsoft.com/upgrade

• The safest way to recover deleted music files - without the risk of my computer.

  My daughter deleted inadvertently about 200 songs from the computer hard drive... is it the software file recovery from Microsoft or from an outside source who would not compromise my Vista operating system, or other data of non-musique lost?

  If you have Vista Business, Vista Ultimate or Vista Enterprise, you can be lucky.  They have so-called saves shadow copies, which are deleted or modified files that can be recovered in case changes/deletions made by mistake.  http://www.Microsoft.com/Windows/Windows-Vista/features/shadow-copy.aspx more information about how to use this feature to: http://blogs.techrepublic.com.com/howdoi/?p=145.

  If you have Vista Basic or Premium of Vista, shadow copies is not available; However, there is an alternative that is free and the shadow copies feature called Shadow Explorer. http://www.howtogeek.com/howto/windows-vista/recover-files-with-shadow-copies-on-any-version-of-windows-vista/.  Although it will not help you this time, it could very well save you in case this happens again.

  In case this does not work (not all files are available through shadow - it occurs periodically), here are some additional free recovery programs that might help:

  http://www.r-TT.com/

  http://www.SnapFiles.com/get/DiskDigger.html

  http://www.SnapFiles.com/get/easusdfr.html

  http://www.SnapFiles.com/get/restoration.html

  http://www.SoftPerfect.com/products/FileRecovery/

  http://www.SnapFiles.com/get/undeleteplus.html

  http://www.Piriform.com/Recuva

  http://www.munsoft.com/EasyDriveDataRecovery/

  http://techpaul.WordPress.com/2008/06/23/how-to-recover-your-lost-files/

  The files are not really deleted until they are crushed (although they are no longer available through conventional methods).  If you decide to try these recovery programs, you should stop using your drive hard immediately in order not to replace the data that you are trying to recover.  He slave on another PC and launch the recovery of this PC.  Even now you have definitely lost some of them if you use the same PC.  If you can not do this (slave on another PC), you run the risk of overwriting the data with every action you do on the PC (but you may still be able to recover some or most or even all files - it's a matter of luck).

  Only you can decide if the data is important enough to take the PC to an expert data recovery to recover files (they will have better programs and hardware to do that none of us do, and I've provided above).  Do NOT go to the Geek Squad or one of these centers of store-, they generally don't know what they are doing - it take for expert data recovery.  It will cost you a little and they generally offer no guarantees.  The decision is yours.

  Good luck and I hope this helps!

  Lorien - a - MCSE/MCSA/network + / A +.

• What is the best way to copy all the files from one hard drive to another?

  Old disk 60Go new 320 GB drive.  I want to do the new replacement for the old disk drive.

  Old disk 60Go new 320 GB drive.  I want to do the new replacement for the old disk drive.

  Use disk cloning software.

  The safest way is to use an external hard drive enclosure to maintain the new disc during the cloning operation.  These come with interfaces USB or e-SATA to IDE or SATA interfaces for the drive and the computer.  Be sure to get the correct type.  If you have an available internal drive Bay, you can put the new drive it for the cloning operation, but do NOT restart with two connected drives.  After everything was settled down, you can mount the old disk of 60 GB inside, format and use it for storage of backup.

  Cloning (copy to disc) software may have been bundled with your new drive or may be accessed free of charge from the manufacturer of the new command.

  Otherwise, here are a few apps cloning that I have used myself or have been recommended by members of the community:

  Acronis True Image Home
  Casper
  Paragon Drive Copy
  EASEUS Partition Master

• How do I turn off the sound when one take a picture in the acer iconia a1 830

  I want to mute the sound when I take a photo in the acer iconia a1 830.

  This is my first time that i use this tablet, and I do not have this problem. I try to lower the sound level maximum. and I can hear the sound.

  This problem is very basic, and I need a solution.

  The other problem is the temp my tablet is 42 degrees Celsius (with an application to read the temperature of the battery)

  is normal that?

  I solved the problem. I downloaded another app to take photos and this app has the mute option the camera.

• What is the best way (and possible) to remix a song mixed

  GarageBand 10.1.1

  10.11.4 OS

  Mac Book Pro

  16G RAM

  Hobby old YR 68 recording guy/try to leave a legacy

  What is the best way (and possible) to remix a song mixed

  I have a song that is most often improvised, I was told that his cool, however, re-registration is not possible.

  After reading a lot on the mixture, I now hear where the uneducated choice and errors that I made which explains the sound "not as good" that the song is.

  Before I just jump in and try to undo the settings on the tracks (one is DRUMMER) to return to the raw track before effects/eq/compression ect. is is possible to do?  Opens the unfavorable mix, rename it, save it and just go to work and cancel or disable 'things '.

  The basis of the lean mixture comes even to the root where I 'hot' securities, (orange and red)

  I guess by now you understand my question and I am open to a favorable opinion.

  Thanks in advance for your help.

  jojoguiitar_mn_usa

  I read this question so many times and I can't seem to figure out exactly what you're asking.  You just ask if you can go back in your GarageBand project and edit your tracks again?  Of course, you can, why not you?

• Iconia A1-830 has a Wifi connection problem when 3-5 meters

  I bought Asher Iconia A1-830 at BestBuy and after 10 days, I discovered the Wifi connection problem. If you stay near router (1-3 meters) the WiFi signal is good (not excellent). If I go into another room - Wifi connection is poor or disabled. I changed it to another (same model). The second model is perfect only 1.5 months and now she has the same problem with wifi connection. Can someone help me? Maybe the problem in my router, but why it worked 1.5 months?

  Yesterday, I received my return of repair Acer Iconia. They wrote the reason of the problem: reconnected hold of WiFi to the motherboard. It now works like new!

• Acer Iconia A1 - 830 Miracast Support

  Hello
  Is there someone here who has the Acer Iconia A1-830 new help me understand if she accepts Mircast. Can you please check your A1-830 and see if the Mircast option in settings > display > Wireless Display (Miracast).

  I have found no concrete information on the world wide web in this regard. I would be grateful if someone could help me with this.

  Thank you.

  Under settings. Unit; screen I see is brightness, Wallpaper, sleep, dream and font size. Do you need to have an application installed first?

• What is the correct way or better to manage your site files according to the folder of your site?

  I apologize if this seems to be a silly question but I'm still having trouble getting my head around the management of files when using dreamweaver. I know that I am supposed to create a root folder that I created on my desktop. All of my sites that I have here in create in dreamweaver go to sub files in this main file or am I supposed to have several root file?

  Ive assumed I create a single up to that point. However I have other questions... for example when I create a fluid grid site I go through the steps of creating first my folder under this new site in my account from the main root for dreamweaver, save my css inside file when asked, and then I save the html file main Sub ' save under ' as well... However, as you know, creates then two files separate, 'catch-all' and 'response' but instead of placing them in my folder of pennies for this site, he places them in the root file instead of in the subfolder that is located in the file root (if necessary). If I manually move them to the sub folder to keep things tidy this will mess up my files? Dreamweaver will be able to go to search folder under rather than the file root where he keeps putting automatically their?

  Or I have the complete wrong end of the stick to understand how to make the management of the work all together?

  Any help greatly appreciated

  Ed

  OK so just to clarify. Each site actually has its own root folder and simply for the love of the organizations you place all of your files to the root of each site in a larger folder which in your case is called 'sites '.

  Exactly that.

  My confusion is that dreamweaver seems to have everything automatically create new site, I try to go in a root folder, I created a site earlier. That's why I guess you don't have that one folder root and all of your different sites exist within of the it.

  Ignore this. I see sometimes that happens as well. But because you browse to find the folder new root of the site in any case, it is imminent can be ignored!

  -I created a new folder outside of dreamweaver on my desk first who must accommodate all that documents sites. I was the creation of each new folder in what I thought, it's the main single root for dreamweaver folder that was on my desktop up to this point.

  There is no "single root for dreamweaver folder. As you might have guessed, each site has its own root folder and root each folder contains * all * files that make up this particular site. ***

  -J' then I open dreamweaver and will create a new site layout fluid grid

  -He asks me to save my css somwhere... I save in my new site folder (I now know what will be the root folder of my sites that each website has its own root folder)

  All my sites have a "_css" at the root folder. I precede these files with an underscore so that this and other like him (for example '_img', "_scripts", etc.) will sort together, and at the top of the list of files. This issue of _css in the root of this site, this is where I would put the stylesheet quote you. ***

  -When he opens all I go to 'file' and ' save under ' so that I can put the HTML in the document in my root folder as well. (don't forget this root folder is sitting in another folder called "root folder" but you assume I simply call 'sites' in this example.)

  So. ***

  -When I do this the html records in the folder root of the site as I hope.

  -However, dreamweaver application also my permission to create two new documents as mentioned (boilerlate and respond). Despite me trying to click the folder root of sites and it saves the documents it contains, like the rest, he saves instead what is in your folder "websites" in this example... next to the folder root of sites that i would have it should be in (not... correct me if I'm wrong)

  Well, this suggests that you have not set the root folder properly. These two files must be saved in the root of the site. If this location is not what you are talking about as the root of the site, then something is wrong.

  Why do you think that what is happening? or is it supposed to? I would have thought not myself.

  as I side question while I'm here... when I see that my css or js documents have been saved in the wrong place, as I assume they were in the example above... How can I change the location of their in dreamweaver so that dreamweaver knows where they have been moved to? I know not how to do for the HTML document main because its easily done using "save under" on the file menu, but I'm not sure how do for the other document that dreamweaver creates something like a checkerboard to fluid.

  Sorry... I'm sure it's painful for those who know how... but I'd love to get my head around things like basic

  The best way to change the location of all files used in a DW site is to use the DW files Panel to drag - move these files to the desired location. Management of DW links will kick when you do this and adjust all the existing links to these files to accommodate your move. ***

  Here is a series of images that show the process to create a new site-

  THE NEW PROCESS OF SITE

  

  NAME of THE SITE, THEN BROWSE to THE NEW LOCATION for THE ROOT (this image shows the starting state of those that have been done before)

  

  NAVIGATE TO THE FOLDER OF YOUR NEW SITE WILL BE CREATED IN WHICH

  

  BY CLICKING THE NEW FOLDER OPTION, YOU CREATE THE NEW SITE ROOT FOLDER AND THEN CHOOSE IT

  

  I CREATED TWO NEW FILES IN THE ROOT FOLDER THAT WILL HOST MY CSS AND IMAGES RESPECTIVELY

  

  After SELECTING THE NEW ROOT FOLDER of the SITE AND clicking 'Choose' I SEE THE DIALOGUE START WITH THE path box to ACCESS CORRECT WORMS CE FOLDER ROOT IN THE FIELD RECORD of SITE LOCAL

  

  I hope that helps!