Time settings airport capsule (1st generation)

Similar Questions

• Airport Express (1st generation) not connect to iPhone 6 iOS 10.0.2

  I am trying to connect and listen to music from my iPhone 6 iOS 10.0.2 through the music app. My phone does not see the Airport Express Terminal more. All I see is my Apple TV. I can connect to the Airport Express terminal when I use iTunes on my computer. My iPhone is used to connect to the Airport Express Terminal.

  I checked my Airport Express for the updates and it is updated in accordance with the programme of AirPort and PC utility App.

  AirPort Express (1st generation)

  Version: 7.6.7

  I also tried to restart the AirPort Express.

  Any ideas on how to make of this connect on my iPhone?

  Thank you!

  Hello...

  Try a reset > reset an airport base station FAQ - Apple Support

• Restore backup after the reset Time Capsule (1st generation) using Windows PC

  I apologize if this question is somewhere already. I tried to find an answer and I've seen similar discussions but not exactly what I need.

  A bit of history... The location is a small school with about 10 cameras, its network systems, point of sale, cloud networked storage, etc. Was asked by the owner to create or activate a Guest WiFi SSID. They said he worked at the same time, but some work was done by a previous technician and they lost the WiFi of comments.

  So I used the Airport utility to access the time Capsule. However, after the change to the next level (enable the public IP sharing? maybe?), he ended up destroying the entire network, as in nothing was back upward when the utility scanned for devices. Even the Time Capsule was not recognized by the utility. I ended up doing a hard reset on the Time Capsule and do my best to manually configure the device again, even though I was not initially designed the network. I have also discovered that 1st generation Time Capsules have no comments WiFi capabilities.

  To make a long story short (too late... "I know sorry..) .. I got most of the features, functions, etc. on the network back where they were before, with the exception of camera systems and a network storage device active cloud to the owner's House.  What I would like to know is... Since then, I understand that a hard reset does NOT erase the backup or other data on the shared disk in the time Capsule... is there an easy way to restore the settings of all of the time Capsule before the problem occurred?  I would need to do this using a Windows computer.

  Any help will be greatly appreciated. What I'm trying to avoid the most is having to reset all the cameras, which are upstairs, hard to reach areas. I guess that people who were previously assigned on the cameras must still be there. If only I could get the Capsule of time exactly where it was before he went down, which would allow me to save a lot of time and frustration.

  You can also (2nd choice)... If there is a simple way to detect the active network cameras and other devices on the Time Capsule and pull the IP out of them, that would be helpful as well.

  Thanks in advance for answers!

  What I would like to know is... Since then, I understand that a hard reset does NOT erase the backup or other data on the shared disk in the time Capsule... is there an easy way to restore the settings of all of the time Capsule before the problem occurred?

  You have my sympathy all...

  Been to this place before today... and I always get myself into it by pure stubbornness... I should just walk on some of these jobs and tell them too hard...!

  What you had to do was to export the configuration before you start playing. Without export of the configuration there is not much hope of healing to less than the previous tech saved a configuration to the unit... This example gets much delicate.

  The TC is actually able to contain several configurations... There is a good chance, however, that wipe you the.

  Anyway... coming to the serious Tin. (same version on Mac and PC utility should work the same).

  Here's my TC who foolishly a reset.

  

  When I do something... first manual configuration, I wonder is to revert to the previous version.

  

  You have done or could you saved the previous settings as a profile... I hope that you did... in the hope...!

  IF so, you have a saved profile.

  In the area of the top menu go in manage profiles.

  

  

  Now, if you are lucky or did the job just last time... by accident... you'll have a saved profile... Just click back.

  

  If nothing is there, or it's current settings... Sorry, but you didn't know something was there... and you cannot was expected to know the trouble you would get yourself in.

  If you have changed a setting in the TC of the bridge in router mode...

  

  (enable the public IP sharing? maybe?)

  Getting back to what it was... mode bridge being the most common.

  At the bridge of the TC does control most things... and you need to return to the main router.

  If the TC kicking upward a stench to return to the bridge, reset it simply still once and then bridge will work... It would be useful to loads to remember what was the setting... just to see the bridge takes the TC of the equation to know where the cameras are.

  If the cameras are on static IP, they will respond to a ping scanner... If the primary router is configured for a standard range of IP addresses... 192.168.1.xxx some.

  Then the TC in bridge must have also taken an ip address in this range and the cameras (Ethernet or wireless)?

  I hope that ethernet, but if they were using the TC as a wireless access point, unless you know exactly the SSID wireless as it was in the past then you do not have this info...

  Look at any computer, they have in the building that was running wireless and watch all the SSID that they use... one of these is likely the TC and you can restore this name.

  Or drop a camera... and ethernet allows to connect to him... and find the ssid, that it's been fixed... redefine the TC on this name (SSID) wireless security... all cameras must be able to connect to it... and you can then restore the entire system by connecting to the IP address that will be displayed in the list on the main router.

  Good luck.. as says Han Solo... you'll need!

• I have an AirPort Express 802.11n (I just got 1st generation) who does not appear in Airport utility? The Express flashes an orange light.

  I have an AirPort Express 802.11n (I just got 1st generation) who does not appear in Airport utility?

  The Express flashes an orange light.

  I tried to reset to factory by using a paperclip for a little more than 10 seconds (green LED flashes).

  The Express flashes a light - orange after the reboot - that seems normal to me.

  I use an iPad or MacBook Pro (without port cat 5) set up.

  I would like to extend my WiFi network and stream of music with it.

  Read the manual and did some research but I'm stuck.

  Thank you for taking the time to help...

  NOTE: I also have a second generation version which works very well.

  Let us first make sure that you really have a 1st Gen AirPort Express. To do this, look for the model number on the side of the Express. It is difficult to see, with grey lettering on a white background, but the number starts model with an 'A' followed by four digits.

  You do not want to see A1264... not A1084 and A1088.

  Share your findings.

• use time capsule 4th generation to extend the network

  Can I use the time Capsule (4th generation) to extend a network? I would like to connect via Ethernet to a router (Belkin) of non-Apple. Thank you.

  -> Belkin router-> Ethernet cable modem-> Time Capsule-> wifi network products in another part of the House

  Yes, it works perfectly.

  The TC will be in bridge mode...

  

  The wireless will be defined to create a wireless network.

  You can use the distinct name to the Belkin Wireless... or you can use a name identical to the Belkin with identical password wireless and security setting... This is called roaming network, so in theory, you can wear around your wireless devices and they swap "tours" as a mobile phone... Sounds good in theory... a little less than the sum of the parts actually.

  

• 1st generation Apple TV cannot connect with the apple ID

  Have 1st Generation apple TV and recently cannot connect with my apple ID.

  The reset several times and nothing.

  Help?

  You have activated 2 no authorization of your Apple ID? If so, disable the connection from a browser and temporarily, then connecting ATV, then reactivate. If not, please describe what is happening when you try to connect. What message do you have?

• Where can I find a hard case for original ipad (1st generation)?

  My boss is looking for a replacement for its former case rigid ipad (ipad 1st generation).

  He refuses to use anything other than the original case which was sold by Apple, but I'm having a very difficult time tracking online (amazon, ebay, etc.).

  Anyone know where I can find the former stop?

  Thank you!

  Sincerely,

  SYD

  If it isn't on Amazon or eBay I doubt it's anywhere. These cases are 6 or 7 years and at the time current technology, positively ancient.

  I have a case (not Apple, but a wallet leather one) that I bought when I bought my iPad 2 (bought the case for one because it was cheap), but the terms of use forbid me to exchange information or sell it here.

  You could look on Craig's list or put an ad.

  Or it may need to change its preferences and start using a universal case.  I seriously doubt Apple is what makes them most and probably were not years.

• IPhone 1st generation

  Hello world. I have an iphone 1st generation with a screen broke and I can't find a service to fix it. I love this camera and I really want to make it functional again.  Any suggestions?  Thank you

  All I can suggest is keep hunting until you find a third party store that includes and can fix it. It is an obsolete device Apple is concerned. They no longer service or support or have the replacement devices available and they never stocked parts for it as service is managed by the replacement, no repair.

  p.s. https://www.ifixit.com/Store/iPhone/iPhone-1st-Gen?page=2 & display = list lists the display available for $200 but stock and should have a repair guide too.  Note those will be retrieved/used parts, but shop ifixit has a good reputation, has been around for a while and offers a lifetime warranty parts. You could contact them and ask about the availability of the display 1st gen iphone.

• My Apple TV 1st generation can not access my Apple ID iCloud account

  Hello! New problem.

  Now, when I want to connect my Apple TV 1st generation to my iCloud account, or when I want to rent a movie from my account iCloud for display on my TV, after that I entered my * correct Apple ID & pswd on Apple TV, I get on my iPhone, a message that someone is trying to connect to my iCloud account I answer "Allow connection" reception on the iPhone a code 6 digit should I enter on the Apple TV. But Apple TV 1st generation can not enter any code recognition, there is no space to do it, he said just that the pswd is wrong (which is not!). If the Apple TV is unable to open a session. After the 4th attempt, Apple TV tells me that after so many failed attempts, my password is ignored by Apple and I need to connect to my Mac iCloud account to receive a new pswd. I connected from the mac and don't see any mention of any incident. I signed up for authentication two factor on July 21, 2016. My list of secure devices remains unchanged (MacBook Pro, iMac, iPhone and iPad, no Apple TV).

  I checked:

  The Apple TV is connected to my network domestic wi - fi as usual: it is the case.

  Internal the software of Apple TV is up to date: it is.

  That my home network connects to the internet: it does.

  Two-factor authentication would be the cause of my new problem?

  Should I disable?

  How can I connect to new my Apple TV 1st generation to my iCloud account?

  TIA (Apple TV 1st generation MacBook Pro early 2011, 2011 iMac id, 10.11.6, 5 c iPhone OS, iPad mini 1st generation, iOS 9.3.3)

  Disable authentication factors while you identify yourself, you should then be able to reactivate it later.

• Sites Web regularly not approved since refreshing Firefox. I deleted cert8.db; time settings are fine, but still does not work. What should do?

  First had error message saying that something prevents update with the Firefox Firefox refresh query. So I did. Result is common Web sites such as google and own sites of mozilla not opening not because "Untrusted connection" - (error code: sec_error_unknown_issuer).
  I am working on Mac OS X 10.10.2
  Has deleted the cert8.db in folder profile a couple of times, but does not work.
  Time settings are fine.
  Removed the whole browser app and reinstalled again; same problem occurring. What is going on? And above all, how can it be fixed?

  Ah, you see AVAST there under the issuer of certificate?

  Your Avast security software is intercepting your navigation to filter threats. In order to filter connections secure, Avast creates these false certificates and presents them to your browser. Since Firefox uses a certificate from Safari, Firefox should be set up to trust in Avast to generate these certificates.

  Now... in theory, Avast is supposed to update Firefox automatically when you go outside and start it again. I guess you left Firefox since this problem started, but, if not, that give a try.

  If this does not work, you or a volunteer will have to search the steps to get the Avast signing certificate in Firefox.

  Plan C would be to get the old file cert8.db file old data of Firefox on your desktop and it transplanted into your current Firefox profile. You must already have been put in place to work with Avast.

• If I sell or give my Mini iPad (1st generation) with more cellular WiFi (Verizon) can I keep my SIM card?

  If I sell or give my Mini iPad (1st generation) with WiFi cellular (Verizon) can I keep my SIM card? OR once I deleted everything out of the device, the SIM card will be ready for a new user and all my information have also been deleted?

  Yes, keep the card. The new owner is their own SIM for the device if you wish.

  Make sure you follow all the steps here to ensure that the device is not locked for the new user. What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

• 1st generation ATV dead. Orange light but no screen and no resetting of distance.  I tried direct connection to Mac and iTunes open and he's not here.  Is it possible to restore to the factory without screen or remote work

  1st generation Apple TV is dead. Orange light but no screen and no resetting of distance. I tried direct connection to Mac and iTunes open and he's not here. Is it possible to restore to the factory without screen or remote workin

  I guess you tried maintained low men together for about 6 seconds - silver 1 ATV that will restart to the diagnostic partition but who would rely on the hard disk is functional and if it was ok that wouldn't work with the logic board failure.

  I guess you have not fed and attempted to restart.

  In case your AppleTV think it is paired with another remote try Menu and left arrow for 6 seconds - the light now intervenes when you press the buttons on the remote?

  Also, it could be in the video mode bad - try Menu and upward arrow together for 6 CES switch video modes, but implies that he actually started OK.

• iTunes will not connect to Apple TV 1st generation

  I recently tried to synchronize the new movies for Apple TV 1st generation in iTunes, but it does not appear in my list of devices in iTunes.

  He worked recently, but all of a sudden the Apple TV does not appear in my list of devices.

  When I connect my iPhone & iPod to iTunes, it works very well, but not Apple TV?

  You connect via WiFi or ethernet?

• Equium L20-198: error 0271 check date and time settings.

  My apologies if this appears twice, I tried to change and I somehow lost my thread.

  Hi people.

  For awhile, I had problems with my laptop. Toshiba Equium L20-198.

  If I unplug the network at any time, when I re - connect and start the computer, I get two warnings.

  Date and time settings error 0271 check.

  WARNING 0251 system cmos checksum bad default configuration used

  About 6 months ago we replaced the CMOS battery, while we struggled to find a brand new ML1220EI2 Nickel hydrogen 3V 14mAh, we had to go for a "used" quality one.

  The problem persists and I now also get this message every time that I reboot rather put into hibernation.

  Yes, the computer is a little more than 5 years and hit a little, but it is absolutely perfect in all other ways - with one exception - the main battery is completely dead. If the network becomes disconnected, I make you stop in about 3 minutes. :(

  Is it possible that the CMOS battery charge the main battery and this is my problem? I did a little research on Google and found a similar question and an answer on a Dell forum where someone has stated that the CMOS takes his food on the main battery. Would this be the case with my Equium and could buy a new battery solve my problem? I obvioiusly don't want to spend £30 + for it will not help, any response would be appreciated.

  Thank you.

  > Is it possible that the CMOS battery charge the main battery and this is my problem?
  Well, the CMOS battery can be charged with AC adapter but the laptop must be turned on for about 18 to 20 hours.
  It s not I known if battery CMOS takes the power of the main battery
  Usually the CMOS battery should always charge in work and when the laptop is plugged in
  So, theoretically the main battery has no influence on the CMOS battery.

  I think it might be a mobo problem, I think this could be a reason for it

  By the way; in most cases the CMOS battery is not removable... so I wonder how did you repalce this CMOS battery...

• L20-198 error 0271 check date and time settings

  Hi people.

  For awhile, I had problems with my laptop. Toshiba Equium L20-198.

  If I unplug the network at any time, when I re - connect and start the computer, I get two warnings.

  Date and time settings error 0271 check.

  WARNING 0251 system cmos checksum bad default configuration used

  About 6 months ago we replaced the CMOS battery, while we struggled to find a brand new ML1220EI2 Nickel hydrogen 3V 14mAh, we had to go for a "used" quality one.

  The problem persists and I now also get this message every time that I reboot rather put into hibernation.

  Yes, the computer is a little more than 5 years and hit a little, but it is absolutely perfect in all other ways - with one exception - the main battery is completely dead. If the network becomes disconnected, I make you stop in about 3 minutes. :(

  Is it possible that the CMOS battery charge the main battery and this is my problem? I did a little research on Google and found a similar question and an answer on a Dell forum where someone has stated that the CMOS takes his food on the main battery. Would this be the case with my Equium and could buy a new battery solve my problem? I obvioiusly don't want to spend £30 + for it will not help, any response would be appreciated.

  Thank you.

  Post edited by: d14ner

  Hi people.

  For awhile, I had problems with my laptop. Toshiba Equium L20-198.

  If I unplug the network at any time, when I re - connect and start the computer, I get two warnings.

  Date and time settings error 0271 check.

  WARNING 0251 system cmos checksum bad default configuration used

  About 6 months ago we replaced the CMOS battery, while we struggled to find a brand new ML1220EI2 Nickel hydrogen 3V 14mAh, we had to go for a "used" quality one.

  The problem persists and I now also get this message every time that I reboot rather put into hibernation.

  Yes, the computer is a little more than 5 years and hit a little, but it is absolutely perfect in all other ways - with one exception - the main battery is completely dead. If the network becomes disconnected, I make you stop in about 3 minutes. :(

  Is it possible that the CMOS battery charge the main battery and this is my problem? I did a little research on Google and found a similar question and an answer on a Dell forum where someone has stated that the CMOS takes his food on the main battery. Would this be the case with my Equium and could buy a new battery solve my problem? I obvioiusly don't want to spend £30 + for it will not help, any response would be appreciated.

  Thank you.

  Post edited by: d14ner