Using the scale tool
When you use the scale tool in cs4, I select an object and resize it. Is there a modifier key that I can use to quickly disable my object and select another? I don't mean click V to select the selection tool main then Q for the scale tool. I want to know if there is a key that you can temporarily hold to return to the selection tool, as Photoshop allows you to use the Cmd key.
Select an object. Press 'Q' and you can use the scale on that tool. you want to unselect this object and select another? Double-click on the outside of the object and the scale tool is more selected. Then, simply click on another object, press Q and use the scale on it. And so on.
Here's how I do... You don't need to press ctrl/command to temporarily exit the scale tool. If you simply need to do the paper round (use the hand tool, for example, while always after selecting the scale tool), just press SPACE, go where you want, free space, and continue to work with the scale on the selected object tool previously...
I hope this helps!
Tags: Fireworks
Similar Questions
-
Move the point of origin when you use the scale tool
Hello
Can someone tell me if it is possible to move the point of origin when you use the scale tool? By default, when I change by dragging an anchor of the corner, the opposite corner is used as the origin. Ideally, I would like to to scale using an origin that is biased, I can specify sort. I know that you can do during the rotation, but I was not able to determine if this goal is achievable during the measurement. I use Illustrator CC 2015.3.1 and Mac.
Any help would be appreciated.
Thanks in advance
Jason
Click where you want the origin to be. Or move the reticle. Exactly the same as with the rotation tool.
-
Illustrator CS5 distorts vector in resizing, using the scale tool
When resizing a group of vector in Illustrator CS5 with a custom made symbol in Group I get the distortion of the proportion of the form.
I tried
- Tried resizing with the selection tool now the shift or option
- Disable snap to grid of pixels in the transform Panel
- Disable snap to grid of pixels in the option symbol
- Checking Guides enabled for 9-slice scaling is enabled
- Check Stroke Scale and effects is disabled in the preferences
Can you help me resize it without distortion?
Have you had the symbol selected when you disable snap to grid of pixels. Try to extend the symbol
-
Resizing and turning with the scale tool
I don't know if this is a dumb question or not, since I already use FW for the past three years but still have not seen option. My problem is that when I use the "Scale" tool to change the size of an image, if the image is too small, or something like a sprite, the resized image gets all blurry and this is not what I want.
For example, I'm trying to resize or even transform a sprite sheet, but when I do, it'll get all blurry and I need keep it the same way he was before, even if the pixels would be incredibly large with the new size, I would like the image to the same. Is this possible? And if this isn't the case, comment on a good program that can do this? Besides MSPaint (and PS, if possible)? Thanks for the help.If you scale or rotate an object of type sprite, you will want to use nearest neighbor Interpolation.
You to scale an image like this in two ways:
1. modify > canvas > Image size and choose more close neighbor in the dropdown menu, or
2 edit > Preferences to have the scale tool use this interpolation method.See this image for an example: http://www.mattstow.com/tutorials/nearest_neighbor.fw.png
See you soon
Matt
-
How can I change the scale when you use the measure tool
How can I change the scale when you use the measure tool
With the tool selected, right-click the document, and then select "rate of change of the scale.
-
Photoshop canvas make errors while using the Brush tool.
I searched google for solutions to my problem, but could not find any results. There is a screenshot of the included below number.
This problem occurs when you use the Brush tool in Photoshop 2015.1.2 version. Areas rasterized, you see in the image below temporarily appear. If I change the scale of the preview of the Web, the problem goes away and the image appears correctly. I tried to change/disable the GPU settings but nothing has changed. I use a Tablet Wacom Intros 5 and I have the problem with the Tablet and mouse.
I work in OSX El Capitan.
Any ideas as to causes or solutions to this problem? Thank you.
Update your driver from the website of the manufacturer of the GPU video card.
-
Why is there not a reference point locator in the scale tool dialog box in Illustrator?
I guess that's also a suggestion that it is, but why isn't there a reference point locator in the scale tool dialog box in Illustrator? Maybe the function exists and I'm not aware, but it would just using the tool of the easier level. I realize, I can type in mathematics to scale upwards or downwards in the palette transform or workspace, but the scale tool dialog box offers the additional advantage to allow you to preview the results, while the other options are not. Am I missing something? Any help is appreciated.
Roger,
Maybe it's time for a feature request:
-
The message says "to use the line tool java command, you must install a JDK. Click on "more information visit the java developer kit download site." I followed all these steps and downloaded the correct software update, but still getting the message.
A
If you have installed the plugin of Facebook video appeal and you no longer want to use it, you can remove it as follows.
1 back up all data.
2. open the library folder in your home folder by holding down the option key and selecting
Go ▹ library
in the Finder menu bar.
3. place these items in the library folder to the Trash:
LaunchAgents/com.facebook.videochat.name.plist
Support/Facebook app
Here the name represents the name of your Facebook.
4 log off or restart the computer, and then empty the trash.
B
If you do not use this plugin, or any other software (for example, some Adobe products), which depends on Java, install the Java runtime distributed by Apple.
C
If you do not have the Facebook plugin and you don't want to install Java, please ask for further instructions.
-
I use the capture tool. How dp I get rid of the white background in the photo already chiseled the part I. I just want the part chiseled with no experience at all? Any help, thanks
Although it seems to be a white border when you first fill the snip, after saving it shouldn't be present more.
If the border remains you can remove by using the crop tool on a photo editing programs such as integrated Windows Paint program.
-
I installed a game for windows XP and then used the troubleshooting tool to convert so that I can play at 7.
It still fails. What should I do? Please answerHello
a. what game do you have installed?
b. do you get errors trying to run the game in compatibility mode?Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Measures to check the application event log:
1. click on start.
2. in the search box type eventvwr.msc, and then on enter.
3. now, click Application in the event viewer (local).
4. now locate the event log on the right side of the event viewer window.http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-ViewerYou can try to perform the clean boot on your computer and check if that helps.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
To perform a clean boot on a computer, follow these steps.
1. click on start, type msconfig in the search box and press ENTER.If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.Please follow the system in the boot environment. If the problem does not occur, it indicates that the problem is related to an application or a service, we have disabled. You can use the MSCONFIG tool again to reactivate the disabled one by one element to find the culprit.
If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.
For more information visit: http://support.microsoft.com/kb/331796After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.
To restore your computer to a Normal startup mode, follow these steps:
1. click on start in the box start the search.
2. type msconfig and press ENTER.If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.
3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
4. When prompted, click on restart.You can check its compatibility with windows 7 in the Compatibility Center.
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspxHope this information is useful.
-
How can I fix this error msg? your default printer must support a minimum resolution of 300 x 300 to use the shape tool. I am trying to save in PDF format.
When you have what you want to save the selected PDF file, make sure that you press properties, and set the resolution in the settings. PDF files themselves have quality settings, (print quality, Web quality etc) then make sure that you have the right to a game if you plan to use the "print" function to save in PDF format.
-
Original title: what is the disk error checking tool
I am creating a backup on a USB key, I bought recently. But when I do an error apears that the backup was not successful, and then this error appears "the backup target K:\ device failed with the following error:"
The backup disk has a corrupted file system. Fix it using the verification tool disk errors, or choose another backup location. (0 x 81000008)"SOMEONE PLEASE HELP!I am creating a backup on a USB key, I bought recently. But when I do an error apears that the backup was not successful, and then this error appears " the backup device target K:\ failed with the following error: "
The backup disk has a corrupted file system. Fix it using the verification tool disk errors, or choose another backup location. (0x81000008)"SOMEONE PLEASE HELP!Hello
This error can occur if there are problems of system files on the drive selected for the backup file location. Have you tried to save the backup to a drive or another location? Please try the following to fix the disc[1] method: Using Check Disk to find the files corrupt- In the start menu, look for invites
- Right click on command prompt and select run as administrator
- When the application starts, insert the following text and press ENTER: Chkdsk.exe/f/x k:
Where we mean K: the disc damaged.
NOTICE: Check disk is maybe not able to lock the drive and launch the operation if the disk contains files required for Windows to run correctly. It asks if you want to schedule a check disk at the next startup upwards instead.Thank you
Have a nice day :) -
When I try to use the Snipping Tool I get a message saying that "the capture tool doesn't on your computer right now. Restart your computer and try again. If the problem persists, contact your system administer. »
What can I do to fix this?
Thank youHi Palaimo,
See if one of the patches in the following link works for you.
Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]
-
Cannot use the Snipping Tool/Take screenshots
After restarting my computer a few days ago, I found that I was unable to use the cutting tool. Whenever I try to use it, my entire monitor turns to a grey color, and some of the text on the tool itself is blacked out. I tried to take a screenshot instead, but the images do not copy, so I can't paste. I tried to install some program of photo sharing, and none so far has worked. They usually give me a black square instead of a picture. I have not installed anything that might explain this recently, and I'd appreciate some advice. (My computer using Windows 7 at the moment).
Hi Michelle,
You can capture all of the following types of comments:
Free-form snip. Draw a free-form around an object shape.
Rectangular snip. Drag the cursor around an object to form a rectangle.
Capture window. Select a window such as a dialog box or the browser window you want to capture.
Capture full screen. Capture the entire screen.
After a capture, it is automatically copied to the Clipboard, and the annotation window. The annotation window, you can annotate, save, or share the snip. The following procedures explain how to use the Snipping Tool.
Please visit these links for more on Snipping Tool.
Use capture tool to capture screenshots
You can view the video that is a hypertext link more on Snipping tool.
-
I can't open the MHT file after using the cutting tool
I used the cutting tool on my Acer laptop in the past to save things as MHT files for later use. Today I used it again after several weeks. I was unable to open the saved MHT files. Can someone help me restore this useful facility?
Hello
Thanks for the reply...
I would like you to click on the following link:
Let us know if that helps.
Maybe you are looking for
-
If I switch to the photos in Iphoto
Im running mac end 2012 with mavericks and want to upgrade to a new model of 27 "5 k. I know that all my photos will have to enter the new Photos app when I migrates from one to the other. Is someone can please tell me if the photos app is always kee
-
get rid of secure search AVG of TABS
I searched high and low to know how get rid of this research AVG to ensure every time I click on a new tab, I have no arrow or search engine arrows to manage search engines, just what I try does NOT work. Help me I am ready to UNINSTALL my FIREFOX. G
-
Restore the system (win7) after upgrade to Windows 10
Hello, I would like to restore my system using the restoration of images on my hard drive. I did this several times worked great before. Now, I've updated to 10 and when I try toF8 when the system starts nothing happens. What can I do to restore the
-
HP Mini 110 - 1130sl: HP Mini 110 enter password
Help, please! My computer HP Mini 110 - 1130sl has been sitting for a few months, and now he invites me to "Enter CURRENT password" and won't let me use otherwise. After 3 wrong guesses, the code I get is: CNU9393Q2Z Can someone help me get the passw
-
SEH, Structured Error Handler, still working in LV2014?
I am using the SEH or try using I should say. Communication to the Central error handler works fine, but I can't get the options retry or call VI to work even using the code example in the palette. I'm in 2014 of LabVIEW and I just a very small test