The scale of the maps of intensity color ramp

Similar Questions

• Can I change the shape of a color ramp (I do not want a square but a heart)

  Hello!

  I want to know if we can change a color ramp, because mine is a square and I want to have a heart.

  If not, perhaps can I load a picture (of a heart) and change its color depending on the input data?

  Thank you!

  want you a heart? (I hope that's correct )

  In the attachment is what you want.

  How I did it:

  -in Photoshop (you can use something else), I created an image, crop the middle like a heart, create a new layer and save it in GIF format. It is very important to save it in gif format because it allows transparent areas of the image. Save as bmp will fill in the middle with white.

  -Open your cover and (using the mouse) drag-and-drop the gif file created.

  -Add the 'color strip' (make sure its size to mount to the heart), bring back the front image and send "color ramp" (there are a few buttons that allow you to set the order of the controls and indicators - front or back on the toolbar)

  You now have your heart.

  Paul

• Convert 2d table in Jpeg format with intensity color ramp graphics

  I have a chart 2d of some size m x n I want to convert a jpg with the same resolution (IE, I want the jpg to have n x m pixels). I view this table 2d in a graph of intensity. I am currently using flatten pixmap to convert my table 2d in an image and then saving it as a jpg file. Unfortunately the colors don't come out like I want. If I try to use table of colors in the graph of the intensity of the colors come out correct, but erroneous values are associated with colors. I want the color scheme to match exactly what I see on the screen in the graph of the intensity of the jpg, but I want the full resolution of the 2d array.

  I've attached an example of what I'm doing. IntensityGraphColors.vi has a chart showing the table 2d with a color ramp special z-scale, this just vi takes the 2d table and the table of colors on the graph of the intensity and records them in a jpg of intensity. But when I save a jpg file colors come out different, as shown in test.jpg.

  Thanks for the help. I tried searching for similar questions, but could not find any solution that did what I wanted.

  Here is an example that goes from black to blue to white, which will tell you if all goes well in the right direction to do what you want with the entrance of "colors".

  Please note that the colors entry is ignored for the 24 bits of data.

• How to scale a symbol mapped without entering the extrude/bevel palette?

  How to scale a symbol mapped without entering the extrude/bevel palette? I just want to take 3d art and resize it to the top. I don't want to change just the object, I want to scale the symbol that is mapped to the object as well.

  I just thought of it. I need to click on "stroke and scale effects. Duh.

• How to the center of the map is centred over the scale of the map

  Hi all

  I created a mc that works like my card and go with that of controls which allow the card be moved and key target of the navigation and zoom in on at different zoom levels.

  I use scaleX and scaleY to scale the mc card and a list of x and is positioned correctly the position of the sheet for each KeyPoint. The mc card begins at the scale 1:1 with the screen ratio and its registration point is at 0,0.

  When I want to go to a certain area I this calculation (offsetX and offsetY are at the center of the screen and posX and posY are offsets predined on the map):

  Agree = posX * scale + offsetX;

  y = bouquet * scale + offsetY;

  Then I tween the position and scale of the map smoothly at the scale and move the map to the correct position:

  Tween var = new TweenLite (_background, EASING_SPEED, {x: agree, y: Y, scaleX:scale.getScale (), scaleY: scale, facilitated: E ASING_TYPE, onComplete:moveToComplete, onCompletePar ams:[room]});})

  I now need to implement a zoom in / out function and that's what I'm struggling with. The zoom has to use the center of the screen as the reg for the scale, so I tried something in the sense of the following to get the right x and position put after the scale:

  var agree = (_background.x * scale) + offsetX;

  var = y (_background.y * scale) + offsetY;

  I know that it won't but I showed you this to give you an idea of my train of thought, I need to work on this new x and will be there to ensure that the area that is to be zoomed on, rest in the center of the screen.

  So in my mind it gets the distance between the current position of the map to the center point of the screen (offsetX, offsetY) and then changing this distance by the new scale.

  However, it is clearly wrong, because it is not working and the positioning of the card does not.

  If someone could shed some light on where I'm wrong, I would be really grateful that I have a deadline for the first thing that Monday!

  Thanks in advance

  eb_dev

  Realized OK, I made a stupid mistake in the code of constraints, it is now everything works perfectly:

  package map {}

  import flash.events.Event;

  import flash.events.MouseEvent;

  import flash.display.MovieClip;

  import flash.display.DisplayObject;

  to import flash.geom.Point;

  to import flash.geom.Matrix;

  import flash.geom.Rectangle;

  Import utils.scale.Scale;

  Import utils.scale.events.ScaleEvent;

  import com.greensock.TweenLite;

  import com.greensock.TimelineLite;

  import com.greensock.easing.Quint;

  Map.events import. *;

  Card/public class extends MovieClip {}

  private var: scale;

  public var screenSize:Rectangle = null;

  public var dragLimits:Rectangle;

  private var mapWidth:Number;

  private var mapHeight:Number;

  private var moveTweensComplete:Object;

  private var zoomLevels = [];

  private var zoomLevelIndex = 0;

  public var scaleContainer:MovieClip;

  private const ANGLE_DEGS_NE = - 24;

  private const ANGLE_DEGS_SE = 32.7.

  private const ANGLE_DEGS_SW = 155,8;

  private const ANGLE_DEGS_NW =-147.1.

  private const MOVE_DISTANCE = 100;

  private const BG_MOVE_SPEED = 4;

  private const ZOOM_INCREMENT = 0.33;

  private const EASING_TYPE = com.greensock.easing.Quint.easeInOut;

  private const EASING_SPEED = 0.6;

  private const SCALE_AMOUNT = 0.10;

  private const ZOOM_LEVEL_1 = 0.33;

  private const ZOOM_LEVEL_2 = 0.67;

  private const ZOOM_LEVEL_3 = 1;

  private const ZOOM_LEVEL_4 = 1.3;

  public void Map() {}

  /**

  * Listen to when added to the stage

  */

  addEventListener (Event.ADDED_TO_STAGE, init);

  }

  private void init(event:Event)

  {

  /**

  * Set of vars

  */

  zoomLevels =]

  ZOOM_LEVEL_1,

  ZOOM_LEVEL_2,

  ZOOM_LEVEL_3,

  ZOOM_LEVEL_4

  ];

  Scale = Scale.getInstance ();

  scaleContainer = this;

  mapWidth = panContainer.width;

  mapHeight = panContainer.height;

  screenSize = new Rectangle (0,0,stage.stageWidth,stage.stageHeight);

  moveTweensComplete = {pan: false, scale: false};

  getLimits();

  }

  public void getLimits()

  {

  (var left = Math.round((screenSize.width/2)/(scale.getScale ()) - (mapWidth/2));

  If (left > 0) {}

  left = 0;

  }

  (Var high = Math.round((screenSize.height/2)/(scale.getScale ()) - (mapHeight/2));

  If (top > 0) {}

  top = 0;

  }

  var right is Math.round ((mapWidth/2) - (screenSize.width/2)/(scale.getScale ()));.

  If (on the right< 0)="">

  right = 0;

  }

  low var is Math.round ((mapHeight/2) - (screenSize.height/2)/(scale.getScale ()));.

  If (lower-< 0)="">

  down = 0;

  }

  dragLimits = new Rectangle (left, top, (left-right), (low-high));

  trace ("dragLimits left: '+ dragLimits.x +' top: '+ dragLimits.y +' left-right: low high" +(right-left) + ":"+(bottom-top) ");

  }

  public void moveToPos (newX:Number = 0, newY:Number = 0, scale: Number = 0.33)

  {

  this.scale.setScale (scale);

  getLimits();

  Agree var = Math.round (agree);

  var y = Math.round (y);

  trace ("panContainer" + panContainer);

  trace ("dragLimits" + dragLimits);

  /**

  * Check the extensions and lock x / y coords if outdoors.

  */

  If (agree< draglimits.left)="">

  trace ("Bound left has reached" + dragLimits.left + "" + panContainer.x);

  Agree = dragLimits.left;

  }

  If (y< draglimits.top)="">

  trace ("Bound left has reached" + dragLimits.top + "" + panContainer.y);

  y = dragLimits.top;

  }

  If (agree > dragLimits.right) {}

  Agree = dragLimits.right;

  }

  If (y > dragLimits.bottom) {}

  y = dragLimits.bottom;

  }

  trace ("moveToPos - x:"+"agree + y:" + y);

  var moveTweenTimeLine:TimelineLite = new TimelineLite({onComplete:moveComplete});)

  moveTweenTimeLine.append (new TweenLite (panContainer, EASING_SPEED, {x: agree, y: Y, ease: EASING_TYPE}), 0);

  moveTweenTimeLine.append (new TweenLite (scaleContainer, EASING_SPEED, {scaleX:scale, scaleY: scale, facilitated: EASING_TYPE}), - 2);

  var panTwn = new TweenLite (panContainer, EASING_SPEED, {x: agree, onComplete:panComplete, y: Y, ease: EASING_TYPE});

  var scaleTwn = new TweenLite (scaleContainer, EASING_SPEED, {scaleX:scale, scaleY: scale, facilitated: EASING_TYPE, onComplete:scaleComplete})})

  }

  public void moveToPosNoTween (newX:Number = 0, newY:Number = 0, scale: Number = 0.33)

  {

  this.scale.setScale (scale);

  getLimits();

  Agree var = Math.round (agree);

  var y = Math.round (y);

  /**

  * Check the extensions and lock x / y coords if outdoors.

  */

  If (panContainer.x<>

  {

  Agree = dragLimits.left;

  }

  If (panContainer.y<>

  {

  y = dragLimits.top;

  }

  If (panContainer.x > dragLimits.right)

  {

  Agree = dragLimits.right;

  }

  If (panContainer.y > dragLimits.bottom)

  {

  y = dragLimits.bottom;

  }

  trace ("moveToPosNoTween - x:"+"agree + y:" + y);

  /**

  * Pan, end of scale and shipping event.

  */

  panContainer.x = agree;

  panContainer.y = y;

  scaleContainer.scaleX = scale;

  scaleContainer.scaleY = scale;

  moveComplete();

  }

  repositioning of the public service (direction: String, tween: Boolean, distance: Number = MOVE_DISTANCE)

  {

  Agree var = 0;

  var y = 0;

  Switch (branch)

  {

  case 'NW ':

  / * var angleRadiansNW = ANGLE_DEGS_NW * (Math.PI/180);

  Agree = panContainer.x + (distance * Math.cos (angleRadiansNW));

  y = panContainer.y + (distance * Math.sin (angleRadiansNW));    */

  Agree = panContainer.x + (distance);

  y = panContainer.y + (distance);

  break;

  case "NO":

  / * var angleRadiansNE = ANGLE_DEGS_NE * (Math.PI/180);

  Agree = panContainer.x + (distance * Math.cos (angleRadiansNE));

  y = panContainer.y + (distance * Math.sin (angleRadiansNE));    */

  Agree = panContainer.x - (distance);

  y = panContainer.y + (distance);

  break;

  case "SW":

  / * var angleRadiansSW = ANGLE_DEGS_SW * (Math.PI/180);

  Agree = panContainer.x + (distance * Math.cos (angleRadiansSW));

  y = panContainer.y + (distance * Math.sin (angleRadiansSW)); * /

  Agree = panContainer.x + (distance);

  y = panContainer.y - (distance);

  break;

  case "SE":

  / * var angleRadiansSE = ANGLE_DEGS_SE * (Math.PI/180);

  Agree = panContainer.x + (distance * Math.cos (angleRadiansSE));

  y = panContainer.y + (distance * Math.sin (angleRadiansSE));    */

  Agree = panContainer.x - (distance);

  y = panContainer.y - (distance);

  break;

  }

  If (Tween)

  {

  moveToPos (agree, y, scale.getScale ());

  }

  on the other

  {

  moveToPosNoTween (agree, y, scale.getScale ());

  }

  }

  public void zoomIn()

  {

  If (zoomLevelIndex< zoomlevels.length="" -="">

  {

  zoomLevelIndex = zoomLevelIndex + 1;

  scale.setScale (zoomLevels [zoomLevelIndex]);

  trace ("(in):"+ scale.getScale () ");

  moveToPos (panContainer.x, panContainer.y, scale.getScale ());

  }

  / * if (scale.getScale () + SCALE_AMOUNT<=>

  {

  }*/

  }

  public void zoomOut()

  {

  If (zoomLevelIndex > 0)

  {

  zoomLevelIndex = zoomLevelIndex - 1;

  scale.setScale (zoomLevels [zoomLevelIndex]);

  trace ("(in):"+ scale.getScale () ");

  moveToPos (panContainer.x, panContainer.y, scale.getScale ());

  }

  /*

  If (Scale.getScale () - SCALE_AMOUNT > 0.33)

  {

  }*/

  }

  public void zoomFullExtents()

  {

  If (Scale.getScale ()! = ZOOM_LEVEL_1)

  {

  zoomLevelIndex = 0;

  scale.setScale (ZOOM_LEVEL_1);

  moveToPos(0,ZOOM_LEVEL_1);

  }

  }

  private void panComplete()

  {

  moveTweensComplete.pan = true;

  moveComplete();

  }

  private void scaleComplete()

  {

  moveTweensComplete.scale = true;

  moveComplete();

  }

  private void moveComplete()

  {

  if(moveTweensComplete.Pan && moveTweensComplete.Scale)

  {

  dispatchEvent (new MapEvent (MapEvent.MOVE_COMPLETE, {}));

  }

  }

  }

  }

  Thanks for your advice Ned!

• Age of Empires 2 The Conquerors - problem with colors

  Hello

  My most favorite game AoE 2 on does not valid. This means that if I play in single or multiplayer game I see 'blue' water violet and 'green' yellow grass. Also the player color eg 'cyan' on the map it is visible in the yellow form. How can I do? I asked other people about it and there's the problem without correlations with the help of equipment and drivers. I use Windows 7 pro from msdn, my Radeon x 800 graphics. I used the driver windows and amd Web site. I also tried various compatibility without result mode.

  Help me

  Kill explorer.exe, while the game is loading fixed the problem in Windows 7

  http://en.Wikipedia.org/wiki/Age_of_Empires_II:_The_Conquerors

  Messages rating helps other users
  Mark L. Ferguson MS - MVP

  

• Program games (Solitaire) how to enlarge the maps?

  The entire window Solitaire is low.  How can I expand this Site?

  Hello

  If you are referring to the actual size of the maps, it automatically changes with the size of the game window.  Just drag the border to adapt to the size you want. There are also so-called "large printing Deck.

  I suggest to follow the steps below and check if it helps to resolve the issue.

  (a) click on the Windows icon located at the bottom left of the screen

  (b) click on all programs

  (c) then click on 'games' "lonely."

  (d) maximize the window. In the top right of the screen, there are three small buttons/boxes. The middle button/box should be a little box. Click on this button/box to make the largest possible screen.

  (e) click on 'Game' - that are in the upper left corner of the screen. Then click on "Change appearance". The "Change Appearance" box will give you options on the appearance and the size. Choose any card colors/models you want while you're there.

  (f) choose the option "Large print bridge." This will expand the ID card, but not the card. Cards will be the same size, but the name of the map will be bigger.

  (g) these settings are retained until you change it again. Closing the game will not change these options.

• Error of WCS - Position of the map is in conflict with parents

  Hello all-

  I have a large scale of drawing of a floor of a building plan.  I added to my campus and started adding some APs.  When I saw the prediciton model, I realized that I had forgotten to properly at the scale of the drawing.  When I try to scale, I get an error message stating:

  «Error: the given width, height or the position of the map is in conflict with (building or Campus) parent 846.2 of width and length 655,3.» Please increase the size of the parent (building or Campus) through the edit page and/or ensure that the card is well positioned in parent via the edit card page. »

  I don't really know how to fix this.  I increased the size of the building to match the 846.2/655.3, but then the area showing the building is HUGE on my map of campus (Google Earth photo) and I still get the error.

  Kind regards
  Scott

  Step 1.  Go to monitor > maps > building Click > click the menu drop down and change the building > write the dimensions of the building.

  Step 2.  Go to monitor > maps > floor choose > click the menu drop down and change the floor surface.

  Make sure that the horizontal/vertical span is the same or smaller than what you got in step 1.

  The error comes from the word being larger than the building.  As a best practice, I tend to move all the cards to 0,0.

  Let me know if it helps.

• Card problem OBIEE - points on the map illustrated with two different images.

  VI have obiee 11.1.1.7.1 where we have an analysis with a card.

  The base map and the theme is created in 11.1.1.7.3 mapbuilder.

  VI have a variable shape layer in the OBIEE plan. The shape is a circle, and has four different locations (using four different colors to show the differences).

  A query can show 20-30 positions on the map.

  So far so good.

  When we run the analysis, the following occurs:

  1. circles of 20-30 (with one of four different colors) are presented correctly on the map. These results appear directly on the map once we click on "Apply"

  2 an hourglass appears and we will have to wait for 20 to 60 seconds.

  3 then an "x" appears in each of the 20-30 circles and the hourglass disappears. The 'x' is the mapbuilder theme that we created if we do not have any Style 'Render' associated with the Style. If we have a rendering style, for example a simple small point, this point then appears with the circle.

  Our question is how we can force mapbuilder for not making the 'x' in the map. That's where we get terrible response time.

  
  

  Best regards

  Joel
  

  We have solved the problem using only the datawharehouse data to generate BI data layers.

  We have created a new BI data layers using variable forms. Then, we chose a layer of bridge custom rather than use the MapBuilder theme that we created earlier. Then, we used the points Long/Lat for the generation x and y.

• Design of images of the map

  are there good ground rules in the design of your card images?

  How do determine you the "live space" for the image of your card?  to make your design not get trimmed or cut?

  At that time, DPS 2015 does the following:

  -The aspect ratio card format and image (for the top, left and right image) determine the shape and size of the image under the influence of size of card (column & row) and the proportions of the provision.

  -L'image of the map (for articles, banners and collections) is adjusted to fill the area of the image of the map, then centered and cropped.

  General orientation is to use a large images for all images in the card so that you get a good result for the large maps as well as small cards.

  But the main focus at this point is to be very aware of what is at the center of the image. "Artsy" rule of third-party images will not survive.

  There is an interaction between these factors and you have to play with the design of card to make your work plan. Make graphics for a wide and short card image fill the maximum space of a map may take some fiddling with serious at first. Look at the scale to fill the result very carefully.

  N.B. - the brand image is treated differently.

  Brand image is adjusted to adapt, instead of the scale to fill. We do not crop the image of brand.

  HTH

• latitude longitude coordinates SQL Server and the plot on the map of the brochure

  My question is basically:

  How to transform the data from SQL Server and map by unfolding?

  TIP: We run 11 Coldfusion, SQL Server 2000, flyer and JQuery if that helps somehow. If I need to download a javascript library, I can easily do.

  I ambulance and fire events in a database with the xy coordinates. My goal is to ask them about the news and place them on a map of the brochure. All our ambulances and fire trucks have gps in them and they broadcast at all times their location and status. Here's my query to get the latest data from gps for each truck;

  /*

  SQL Server 2000

  David Kulpanowski

  June 4, 2015

  Lee County EMS

  */

  SELECT

  DateTimeStamp

  RTRIM (CallSign) AS [Guide]

  RTRIM (UnitStatus) AS [UnitStatus]

  Latitude

  Longitude

  CONVERT (VARCHAR (15), DateTimeStamp, 106) AS [CurrentDate]

  CONVERT (VARCHAR (10), DateTimeStamp, 108) AS [CurrentTime]

  OF FireEMSGPSDatabase

  RIGHT OUTER JOIN

  (

  SELECT

  RTrim (CallSign) AS [Ambulance]

  MAX (DateTimeStamp) AS [MostRecentTime]

  OF HISTORY_201506

  WHERE RTRIM (CallSign) AS "LCM__".

  RTRIM GROUP (CallSign)

  )

  LIKE [MostRecent] on DateTimeStamp = MostRecent.MostRecentTime

  ORDER BY RTRIM (CallSign) CSA

  ;

  Shown below is an example of this query output;

  Call DateTimeStamp Latitude UnitStatus Longitude CurrentDate CurrentTime

  2015-06-04 17:14:17.357 LCM01 QA 26.56428 - 81.87044 June 4, 2015 17:14:17

  2015-06-04 17:14:17.357 LCM01 QA 26.56428 - 81.87044 June 4, 2015 17:14:17

  2015-06-04 17:14:18.670 LCM02 QA 26.64074 - 81.86507 June 4, 2015 17:14:18

  2015-06-04 17:14:34.420 LCM03 AR 26.64157 - 81.90973 June 4, 2015 17:14:34

  2015-06-04 17:14:20.420 LCM04 TA 26.63885 - 81.94159 June 4, 2015 17:14:20

  2015-06-04 17:14:21.297 LCM05 QA 26.4377 - 82.07806 June 4, 2015 17:14:21

  Below is my Coldfusion page with the flyer plan added in and the cfquery with cfoutput;

  <! DOCTYPE html >

  < html lang = "en" >

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"

  < meta name = "viewport" content = "width = device-width, original scale = 1.0" >

  " < link rel ="stylesheet"href =" http://CDN.leafletjs.com/leaflet-0.7/leaflet.CSS "/>

  " < script src =" http://CDN.leafletjs.com/leaflet-0.7.3/leaflet.js "> < / script > .

  < / head >

  < body >

  < cfquery datasource = "GPSDatabase" name = "AmbulanceLocation" >

  SELECT

  DateTimeStamp

  RTRIM (CallSign) AS [Guide]

  RTRIM (UnitStatus) AS [UnitStatus]

  Latitude

  Longitude

  CONVERT (VARCHAR (15), DateTimeStamp, 106) AS [CurrentDate]

  CONVERT (VARCHAR (10), DateTimeStamp, 108) AS [CurrentTime]

  OF FireEMSGPSDatabase

  RIGHT OUTER JOIN

  (

  SELECT

  RTrim (CallSign) AS [Ambulance]

  MAX (DateTimeStamp) AS [MostRecentTime]

  OF HISTORY_201506

  WHERE RTRIM (CallSign) AS "LCM__".

  RTRIM GROUP (CallSign)

  )

  LIKE [MostRecent] on DateTimeStamp = MostRecent.MostRecentTime

  ORDER BY RTRIM (CallSign) CSA

  < / cfquery >

  < cfoutput query = "AmbulanceLocation" >

  < table >

  < b >

  < td > #DateTimeStamp # < table >

  < td > #CallSign # < table >

  < td > #UnitStatus # < table >

  < td > #Latitude # < table >

  < td > #Longitude # < table >

  < td > #CurrentDate # < table >

  < td > #CurrentTime # < table >

  < /tr >

  < /table >

  < / cfoutput >

  < div id = ' map' > < / div >

  < script >

  var L.map = map ('plan' {Center: [26.5641867068354,-81.8704100173261], fullscreenControl: true, zoom: 12});

  L.tileLayer ('http://{s}.tile.osm.org/{z}/{x}/{y}.png').addTo(map);

  < /script >

  < / body >

  < / html >

  To sum it all up - I have a SQL Server query that retrieves the last my ambulances xy coordinates. I have a Coldfusion page that has a map of the brochure and the cfquery. My question is how to plot coordinates in a flyer plan. I can't understand the middle of the book to get the results of my query in terms of the brochure.

  In addition, it is a dynamic environment. Ambulances are constantly in motion. This page must be dynamic, so that the page can be updated to show the latest data.

  You must create the map and tile layer prior to place markers and then run your loop inside of the script tag.

  I highly recommend reading through the tutorials on the site of the brochure.  They go on these things in detail.

  Quick start - leaflet guide - a JavaScript library for the mobile environment maps

• Look at the maps app will not stop

  When I look for direction in the maps on the watch application, it will not stop after that. I looked for directions to the airport, and then it does not cancel and kept taking me to the airport. I have ensured the application Maps on my phone was not working and he cancelled it but always watch will not stop.

  I tried it yesterday and now today the watch gives me directions to the airport.

  I tried to remove it from the docking, restarted my watch. Watch app from the phone Checked, but nothing works.

  Hello

  To stop your watch directions: open the Maps app on your watch > firmly press the display > press on for policy decisions.

• I have a chase bank credit card that I have good ranking and what number do I call to talk to I tunes because he says, use a different card, it's the map I was buy everything what I tunes. Is it because I have challenged their load m

  I have a chase bank credit card that I have good ranking and what number do I call to talk to I tunes because he says, use a different card, it's the map I was buy everything what I tunes. Is it because I thought them charge me twi

  Can I have it please the number on I tunes support whether please or have them call me at * Leonardo B *.

  < personal information under the direction of the host >

• Update the maps.

  Hey, I have an Iphone 6 s(16GB) in which the maps does not show me the nerby location; For example. (If I find CCD in my area it will show the CCD in the my location (in India) otherwise, it will show the CCD everywhere in the world) I thought it could get better in the next software update, but not had until now. Apple needs to improve maps. Otherwise, please send me the solution for the problem.

  Software I use: I am currently using IOS 9.3.4.

  Aditya.Bobde wrote:

  Hey, I have an Iphone 6 s(16GB) in which the maps does not show me the nerby location; For example. (If I find CCD in my area it will show the CCD in the my location (in India) otherwise, it will show the CCD everywhere in the world) I thought it could get better in the next software update, but not had until now. Apple needs to improve maps. Otherwise, please send me the solution for the problem.

  Software I use: I am currently using IOS 9.3.4.

  http://www.Apple.com/feedback/

• Somehow lost the ability to my color tabs: (what happened. I can even find an option to add colors to the tabs. Help, please.

  After you run a scan with Malwarebytes, today, I lost my tabs, and after that I recreated them, I discovered that I had even more the possibility of their color. How to bring back the color options?

  Probably, you used an add-on for this, because it's not a way into the tabs of color.

  A way to lose all your extensions so is Firefox "reset". If this happens, you should see a new folder on your desktop named "old data of Firefox. This is what appear anywhere?