The sceren LCD on my Handycam DCR-HC26 model no longer meets a contact.

Similar Questions

• Cannot find drivers for Sony Handycam dcr-hc26

  original titile: handycam dcr-hc26

  good evening, I have a sony handycam DCR-HC26 and I don't have the software that allows to transfer to my computer... I used the operating system is windows... I hope you can help me with my problem... Thanks in advance...

  Hello

  (1) Sony gives you the software with Handy cam disk?

  If Yes, try to install the software with this drive, if not please consult the methods mentioned below.

  Method 1: Check the below link to download the drivers for your version of Windows.

  http://eSupport.Sony.com/us/Perl/model-home.pl?MDL=DCRHC26&loc=3#/downloadTab

  For additional support with the Handy cam, I'd contact the manufacturer, here is the link:

  http://eSupport.Sony.com/us/Perl/support-info.pl?info_id=544&MDL=DCRHC26

• I can not put the correct date, time, or whatever it is on the LCD on my HANDYCAM DCR-HC30

  I had not used my cHandycam for quite awhile for the date and the time is shown in the January 1, 2004, at 12: 00 and I was not able to change using the LCD screen. I'm fairly certain that the remote control battery is no good because I never changed it. The camera still records both Ribbon and the memory card, but I would like to be able to set the date and time. Has anyone else had the same problem with this Handycam or know how to fix. I charge the internal battery by pluging in there for more than 24 hours. The internal battery is bad and if so, is it replaceable by me? Thank you.

  If you can access the MENU of the Handycam, please follow the steps below to set the date and time.

  1. turn on your camcorder and open the LCD.

  2. press on P-MENU then MENU.

  3. Select CLOCK SET by pressing the HIGH or arrow DOWN found at the upper and lower part of the screen, then press OK in the lower right corner.

  4 set the YEAR by pressing the HIGH or DOWN arrow found at top and bottom of the screen, and then tap OK in the lower right. Follow the same procedure with the MONTH, DAY, HOUR and MINUTE, and then tap OK.

  NOTE: To midnight, set at 12:00 AM. For lunch, set for 12:00

  You can also view page 22 operations here Guide: https://docs.sony.com/release/DCRHC30.pdf

  If my post answered your question, please mark it as "accept as a Solution.

• Handycam dcr-hc26 wouldn't work on windows 8

  I just bought a new computer with windows 8. I got the camcorder (DCR-HC26) for awhile now. When I treid to operate on my new computer, cannot do. I have search and treid everything. The accompanying cd will not work on windows 8. I downloaded PlayMemories, still nothing. Can someone please. I'll be very angry if I can't get this working on windows 8. I have a lot of taps.

  Hi Todd,

  The community here is a way to connect, share and help each other with a variety of topics. We as moderators are doing our best to intervene when the community has failed for a few days. However, if you need immediate assistance or an answer right away, we strongly suggest you contact Sony technical support for a quick and direct answer, either via chat or by phone by clicking here:

  http://eSupport.Sony.com/us/p/support-contacts.pl?MDL=DCRHC26&loc=3

  To answer your question, this camcorder USB Streaming feature is not possible with Windows 8 operating system. If you try to connect the camcorder to your computer Windows 8 using a USB cable, the camera will not be recognized by the computer.

  To transfer the videos from the camcorder to your computer with Windows 8 operating systems, use an i.LINK (a.k.a firewire or IEEE1394 cable) cable or Audio/video provided (A / V) cable and software compatible video capture as Windows MovieMaker software.

  According to the availability of the iLINK decision-making or A / V jack on the computer, follow the instructions provided in the links to transfer the videos below.

  i.LINK cable:

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/37892/p/36919, 37620,37639/c/65,66/kw/transfer%20vi...

  Audio/video (A / V) cable:

  http://eSupport.Sony.com/Tutorial/389/us/en/

  Once you have transferred the videos on your computer, you can use the software PlayMemories home (WPH) to organize the video files.

  If my post answered your question, please mark it as an "accepted Solution".

  Thank you for your message.

• My new Sony Vaio PC does not recognize my Sony Handycam DCR-HC19E model. I have no installation CD. How can I connect two devices, please?

  Previously, I had a Fujitsu Amilo PC operating Windows XP Professional. I had no problem with these 2 devices of connection. Now, I bought a Sony Vaio PC

  Windows 7 Home Premium and it can not recognize my webcam. I bought a cable iLink (hama), but without success.

  What can I do, please?

  Hello

  Method 1.

  Connect the device, run the hardware and devices Troubleshooter and check if that helps.

  To open the Troubleshoot utility equipment follow the given link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  You can also check the updates available for your computer.

  Method 2.

  Install a USB device: http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Refer.

  You need to contact Sony support to get the disc because it contains software of camcorder. You should also check the camcorder manual as it contains instructions to enable the USB setting in the camera for it to get detected in Windows 7 computer.

  The KB article for the Sony camcorder is:

  http://www.KB.Sony.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=C499324&sliceId=1&docTypeID=DT_KNOWLEDGEARTICLES_1_1&dialogID=553948590&StateID=1%200%20553950910

  Hope this information is useful.

• Unable to capture video from digital camera Sony DCR-HC26

  I replaced a PC under Windows XP with a new PC running Windows 7 Home Premium and I was not able to connect my Sony Handycam DCR-HC26 digital tape camera to the new PC.  I use an I-link (firewire) cable.  The camera seems to be recognized by the PC as a Sony DCR-HC26E, but trying to capture the video, the following message appears: "failed to find the camcorder (band). Check the i.LINK to the Handycam. "I suspect a problem driver type is the cause but I'm running out of ideas on how to solve this problem.  Any ideas?

  Curry,

  I don't understand your suggestion.

  1. When you say "entry for firewire (IEEE1394)", do you mean "entry for controllers Host Bus IEEE 1394"?
  2. When you say "pilot LEGACY", what is it and where can I get a "LEGACY driver"?  (I clicked on properties for the Texas Instrument 1394 OHCI Compliant Host Controller and did not find anything on "LEGACY").

  Bruce

  Hey, maybe I can answer this question.
  1 double-click on controllers Host Bus IEEE 1394 you will find the appeal of device 'compatible OHCI 1394 host controller ".
  2. highlight the 'compatible OHCI 1394 host controller' right click on "update driver software".
  3. Select 'Browse my computer for driver software ".
  4. at the bottom of the window, select "Let Me pick from a list of device driver on my computer.
  5. you can select "1394 OHCI Compliant Host Controller (legacy)" as the driver and then click "Next".
  6 fact

• The sony handycam dcr-hc30 can endure more than the 512 MB original memory? Thank you.

  The sony handycam dcr-hc30 can endure more than the 512 MB original memory? Thank you.

  According to this table of compatibility: http://esupport.sony.com/perl/support-info.pl?&info_id=11 DCR-HC30 may use the following maps:

  Memory Stick Duo Pro - 1 GB, 2 GB and 4 GB

  Mark 2 Memory Stick Duo Pro - 1 GB, 2 GB and 4 GB.

  You can read the table to make sure I was reading it correctly.

• Handycam DCR-PC55B where can I get the latest version of the software?

  I have a Sony Handycam DCR - PC55/B

  Where can I get the latest software and drivers for this?
  I'm running Windows 7 64

  I looked on the site and find several options, but as much as those to whom I am supposed to download I have no idea. I don't have the disk for the camera more. It works great however, I would just have any current to the extent where the drivers and editing software.

  Thank you for any assistance.

  I'll tell you this question as it solved. I could find my disc.

  That said, I still can't my videos from my camera to the PC. I don't know what to try next, it is a system Win7 64 and I don't think that one of the drivers for my camera is installed. However, when I look at my records I don't see any video transfer, but there is certainly video.

  I'll start a new topic, how can I transfer video to a Handycam DRC-PC55B to a Win7/64 PC and edit it?

  Thank you for your help.

• Sony Handycam DCR-SR68

  Hello
  About six months ago I bought a Sony Handycam DCR-SR68. It displays the message: can't access HARD drive. How to eliminate this problem?
  Thank you!

  Hello. If you experience a problem where the camcorder is not able to access the HARD disk, it would mean that there is an underlying problem with the HARD drive. Try to run MEDIA FORMAT, but take note that this will delete all files. If it does not solve the problem, RESET the camcorder (press the tiny reset button located in the lower part of the Panel where the LCD is going). If it still does not work, unit may require service. BTW, 6 months would mean that your still in warranty for the parts, but not for work. I hope this helps.

• transfer videos from Sony Handycam DCR to OSX Lion

  Hello

  I was prompted to change some videos of mini cassette of a Sony HandyCam DCR HC-19th.   Any ideas on how to transfer to and edit the videos on my MacPro 1.1 10.7.5 running OSX?  The camera has a mini USB output port.

  Thanks for the tips... BRITISH COLUMBIA

  You have installed iMovie? Connect the device to your mac and open iMovie and check.

• I HAVE SONY HANDYCAM DCR HC 23 I COULDN'T CONNECT IT TO MY PC WITH WINDOW OPSTSTM 2000.

  I have sony handycam DCR HC 23, I couldn't get it to connect to my system, my system is recently formetted

  I would like to have readers for the above-mentioned handy cam, please suggest locations for discs to load down

  the information and files you want are on the page/site support

  eSupport. Sony.com

  : jz

• Sony Handycam DCR-SR30E - download software Imagemixer?

  Have a Sony Handycam DCR-SR30E. Swapping to new computer and can not find the disc ImageMixer. Options?

  You can install home PlayMemories which replaces the camera software. This will allow you to import, organize, edit and burn images and videos taken by your camcorder. Please note that the software is only compatible with a Windows computer. Visit http://sony.net/pm/ for more details.

• Handycam DCR-HC20 questions

  My wife has a Sony Handycam DCR-HC20. We have a laptop of Dell Latitude running windows 7. We tried to show and transfer videos recorded on the Handycam to our computer. So far, the computer does not recognize the camera when I try to add. My wife said that she had a drive to intall the software to the computer when she got the camera, but she got several years ago. Is there a driver or a way to display the records from the camera to the computer?

  Hi Clayton,.

  Welcome to the community of Sony!

  The drivers needed to connect the camcorder to Windows 7computer and transfer files are already included in the operating system. However, the USB streaming feature is not supported with the Windows 7 operating system. You can connect the camcorder using either A / V or i.Link cables can transfer video. Instructions to transfer video using A / V and i.Link cables are mentioned below.

  How to transfer video to a computer via an i.LINK connection

  How to transfer video to a computer with Audio/video (A / V) cables

  If my post answered your question, please mark it as an "accepted Solution".

  Thank you for your message.

• Download ImageMixer for Handycam DCR-DVD101

  Hello
  I bought a new computer and I lost my cd for the ImageMixer and USB driver. I have the Handycam DCR-DVD101
  Please, is anyway that I can download it to my computer? Please help me... Thank you
  Paula

  here has a link to the download page select your operating system, and download it, then install.
  http://eSupport.Sony.com/us/Perl/SWU-Li... = DCRDVD101

• Sony Handycam DCR-HC37 Driver

  Sony Handycam DCR - HC37 Driver for windows xp sp3

  Hello Slavenko,

  Welcome to the community of Sony.

  This community is for technical assistance with the Sony Consumer Electronics and Vaio products sold in the United States, Canada and Asia Pacific region. Your DCR-HC37 is sold in Europe and for your convenience, we have listed the respective support page below.

  Sony Europe
  http://www.Sony.co.UK/support/hub/sony_europe.html

  You can contact the team of your country to check the availability of drivers for the Sony camcorder.

  If my post answered your question, please mark it as an "accepted Solution".