The server didn't send an SSL connection. Error 530. error ox800ccc78

Similar Questions

• Windows live mail send error "the server does not support an SSL connection. Server error 250.

  Original title: Windows live mail error send

  Cannot send mail to Windows Live Mail.  Error message... The server does not support an SSL connection. Server error 250. Server - * address email is removed from the privacy *. Windows Live Mail error ID - 0x800CCC7D. SMTP Protocol.  Port 25.

  It's better, thank you. This message is not from the BT Server; It comes from your Avast antivirus which is intercepting your mail. You would be well advised to turn off the Avast Mail shield; It does not add any additional security if you don't by attention elsewhere, and can cause problems.

  I see that it is the record of mail in bulk that because of the problems in this case. Connect to the Web e-mail account and clear the items junk and deleted records.

  BT is recommended to use SSL, but your original question indicated that SSL was not taken in charge for SMTP on port 25. I think we'd better go on all your settings. Recommendations of BT are on this page: BT email: what are the settings for outgoing and incoming mail servers?, but they only work if you disable Avast scanning mail.

  Right-click on the account name in the folders pane, and then select Properties.

  • Under the servers tab, make sure that my server requires authentication is selected.
    Select connect with authentication in clear text.
  • On the Advanced tab, select this server requires a secure connection (SSL) for both servers.
    Make sure that the incoming (IMAP) port is 993 and port for outgoing (SMTP) is 465.

  When you've made all these changes, close Windows Live mail and wait five minutes for the program do its cleaning and save the modified settings. Then, restart the computer and make sure that the Mail of Avast shield is always off.

  Launch Windows Live Mail, then dial a new test message and send it to yourself. Post a new message in your response.

• I get an error "the server does not support an SSL connection" with a code of error 0x800CCC7D in Outlook express.

  I followed Bruce Hagen and still cannot send to the OE section. Reception is no problem. When I try to send I got the following error msg: "the server does not support an SSL connection. "Account: 'pop.att.yahoo.com', server: 'smtp.att.yahoo.com', Protocol: SMTP, server response: ' 250 8BITMIME ', Port: 25, secure (SSL): Yes, Server error: 250, error number: 0x800CCC7D. I tried to change the port for outgoing to 456. When I do so I get this error msg: failed to connect to the server. Account: 'pop.att.yahoo.com', server: 'smtp.att.yahoo.com', Protocol: SMTP, Port: 456, secure (SSL): Yes, Socket error: 10060, error number: 0x800CCC0E.  Is there a cure for this. He just started two days or at least that's when I noticed I cud not send. If you can help me I will appreciate it more. Thank you.

  JP banks

  Original title: cannot send using OE 6. Reception Ok.

  Hi JPBANKS,

   

  Thanks for keeping us posted and share this information with us.

  Glad to know that the problem is solved. Do not hesitate to contact Microsoft Windows Forums for issues related to Windows in the future.

• The server does not support an SSL connection to a Hotmail account

  Original title: the server does not support

  The server does not support an SSL connection. Account: 'Hotmail', server: 'smtp.live.com', Protocol: SMTP, server response: 250 OK', Port: 25, secure (SSL): Yes, Server error: 250, error number: 0x800CCC7D

  The server does not support an SSL connection. Account: 'Hotmail', server: 'smtp.live.com', Protocol: SMTP, server response: 250 OK', Port: 25, secure (SSL): Yes, Server error: 250, error number: 0x800CCC7D

  Your Hotmail account is configured in Windows mail or Windows Live Mail. Yes?
  If the school is "none"... ignore the rest of my answer.

  If so,.

  Open Windows mail > tools > accounts > click your hotmail account > properties > advanced. Under outgoing (SMTP) Mail, change the port # 25 to 587 > click OK

  see if it's ok now by sending a test message to yourself.

  t-4-2

• vmcli fails with SSL connection error against iDRAC 2.40.40.40

  Hello community,

  We recently received a handful of new servers to R730XD, bringing the iDRAC 2.40.40.40 firmware revision.

  So far, we have been using vmcli for the Assembly of a local iso file during deployment - but now vmcli fails with "error: SSL connection error. It seems to relate to the firmware version iDRAC 2.30.30.30 works very well, while 2.40.40.40 fails with above mentioned error.

  Anyone who has experienced - and ideas for the resolution/workaround?

  / Hans

  To idrac, under iDRAC settings > network > Services and try to change the configuration of tls 1.1 to 1.0

• ORA-28547: connection to the server has failed, probable Oracle Net admin error

  Hello

  Environment

  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE    11.2.0.1.0      Production
  TNS for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  

  I'm ORA-28547: failed to connect to the server, probable Oracle Net admin error when connecting to the database as username/password@orcl,If, I do not @orcl it connects without any problems. But I can't connect from client machines without dbstring.

  This problem started recently, and I understand that it is because of the dynamic ip of the linux machine. Previously the Linux m/c ip was 172.25.210.177 unfortunately was launched once the machine ip has changed in 172.25.210.148.

  To bring the database up I started as usual and got to the top, but when connecting db with the above error is being username/password@orcl.

  To solve the i changed the ip address in tnsnames.ora and listener.ora but no luck. Please advice how to solve.

  It will run until the next change of the ip address. If you want a permanent solution, you must assign a static ip address. Why is your dynamic ip address? What is a local testbox.foobar.com or a production system that must be accessible to other systems?

• Manually install the update on the Server 2008 R2 - FATAL: unable to connect to service (hr = 80004002)

  When you manually install Windows updates on our server, we get the following error message:

  Setup Windows Update Standalone - Setup has encountered an error 0 x 80004002 - no such interface taken in charge.

  What follows is also found in windowsupdate.log

  2016-01-26 21:26:47:489 8340 1 b 10 Misc = process: C:\Windows\system32\wusa.exe
  2016-01-26 21:26:47:489 8340 1 b 10 Misc = Module: C:\Windows\system32\wuapi.dll
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI - COMAPI: IUpdateServiceManager::AddScanPackageService -.
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI - ServiceName = Windows Update stand-alone installation
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI - ScanFileLocation = C:\97a2ae7429fcb9d0e21f1eb1a047983b\wsusscan.cab
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI FATALE: unable to connect to service (hr = 80004002)
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI WARNING: failed to connect to the service. (hr = 80004002)
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI - exit code = 0 x 80004002

  Is there a way to repair the wusa.exe?

  Sorry, evil forums. Server issues are better managed on Technet. TechNet - Microsoft forums

• Remove the snapshot from the server and then send a mail to me when the work is finished.

  Hi all

  Could someone help me with a script that would do this?

  Concerning

  Tyler

  This goes in the direction of what you are looking for?

  $snaps = Get-VM | Get-Snapshot
  Remove-Snapshot -Snapshot $snaps -Confirm:$false
  
  $emailFrom = "[email protected]" $emailTo = "[email protected]" $subject = "All snapshots are removed" $body = $snaps | select VM,Name,Created,SizeMB | ft -AutoSize | Out-String $smtpServer = "smtpserver"
  $smtp = new-object Net.Mail.SmtpClient($smtpServer)
  $smtp.Send($emailFrom, $emailTo, $subject, $body)
  

• HP Envy 4500th: HP Envy is unable to connect to the server

  I get the following message appears on the printer screen:

  "The printer cannot connect to the server. Please check your internet connection or proxy settings.

  Some additional info:

  The printer is on a fixed IP and is connected wireless

  I can manage the printer in the printers web interface

  On account of HP web for the printer, it says status: connected.

  My internet connection is OK

  I can print from all my devices (including HP printed on my android phone); but after that the printer window says 'Printing' for about a minute; I get a warning under the heading "moment Ink' - 'press OK to connect printer and update status '; When I press OK the impressions of document perfectly, but the printer hangs on 'Sign in' until she goes back to the original error message.

  I'm not sure that the question is actually at my end?

  Yes. They confirmed to me via Twitter that it was maintenance company on their server. Now works for me. They suggested power the printer off for at least one minute to ensure it reconnected, but I didn't need to do. Shame - they must have our instant ink coordinates - they couldn't have sent us advance.

• 2nd Server IaaS - SSL connection refused.

  Everyone

  I installed a Distributed vCAC pile behind a load balancer.  I've successfully installed the environment but I'm having a problem with the

  2nd Server IaaS.  It's the server without Model Manager and only the Web site component.  With the 1 Server IaaS upward, I am able to

  access the portal.  When I bring the 2nd IaaS I make an SSL connection refused, thia is only happens on the 2nd IaaS.

  Has anyone seen this problem?

  Can you join the newspaper except that you get.

  There could be lots of things, most likely the second server IaaS does not approve the IaaS certificate you configured. Most likely, it happens when he tries to access the Data /Repository. service Did you follow the installation steps when you deploy the IaaS shild (point 15 - if you install components additional Web site behind a load balancer, do not generate self-signed certificates.) Import the IaaS Webservers main certificate form to ensure that you use the same certificate on all servers behind the load balancer. )

  vCloud Documentation Center Automation

• How can I connect my Mac to a network server? As in windows yo go to my computer / connection to a network drive, and then you select a letter and write the name of the server that you want to be logged

  I'm trying to adapt Windows to my new MacBook Pro with OS El Capitan.

  I work remotely for a company and I want to connect my Mac to the server of the company.

  My question is how to connect a MAc to a network drive with the permanently available connection.  For example, in my old HP I went to my computer / connection to a network drive. I've selected a letter and note the name of the server that I wanted to be connected to. The connection was then shown with my other drive hard 'sections '; I want to say C:, D: (for recovery), e: (for tools) and then connecting to the external server has been shown with the selected letter.

  There is no "letter" under OS X. It's a hangover very old of BACK, devices of mapping and volumes labeled mailbox.

  If you are connected to your corporate network, you should see the available network volumes listed in the Finder, in ' my computer > network ", or with the command K to connect to a server.

  You can create an alias for the volume and put it in the Dock, or leave on the desktop or put it somewhere else, and the next time you want to connect to this subject, simply double-click on it. You can also add the server address to your "favourites" in the connect to Server dialog box.

• Unable to connect the server compilation

  I am trying to load the FPGA VI tutorial on my 9004 cRIO device and get this error when compiling

  The compile server doesn't have all available worker who can make a compilation of Xilinx 10.1.

  * You may not have installed the correct build tools.
  * The worker local compilation can be configured to a different compile server.
  * The local compilation worker can be in an error state.

  Details
  123002 error occurred in niFpgaCompileFarm_OpenJob.vi

  Possible reasons:

  NEITHER the farm: no worker has registered the name of given capacity.

  «"" "String of full appeal:»»"»
  niFpgaCompileFarm_OpenJob.vi
  niFpgaCompileWorker_OpenJob.vi
  niFpgaCompile_Worker.vi:1

  Departure time: 17:50:14
  End time: 17:51:07
  Total time: 00:00:54

  I try to acess manually the worker compilation .exe file and it says that the installation of xilinx tool should be checked. and that it could not load a file. (SEE ATTACHMENT)

  I'm not trying to connect to any remote computer. its local server. Here are my computer details

  WIN 7 32 bit

  LV 2010 full dev

  LV fpga in real time all the latest

  Xilinx 10.1 (my chassis is crio-9104 using a virtex-II Bridge)

  I read that xilinx has no full support for WIN 7 not yet. and seen on their website too. But I do not see other ppl with a few problems on the server for compilation with WIN 7 OS, but seems to have solved the problem (although not similar to mine). Which means they made it work somehow. (xilinx Web site says also that he has LIMITED support for win 7)

  I'm really stuck here. I'm still in my learning and (just trying to compile the tutorial VI!) and I don't want to waste time. I feel really stuck here. any help would be great!

  Thank you!

  Rajesh

  Ok. I think I got it. I've reset my network connection and asked to labview to compile. could not connect to compile the server. While crossing retry to connect, I launched the server compile manually, by clicking on the compilation server.exe and then done labview link. I guess I have overlooked some instruction somewhere that compile server.exe must be launched before making an attempt on the compilation.

• Media Player cannot connect to the server - Original COOD2EE7 error code

  Tried media player - tools - options-network. Cannot configure the Protocol / the proxy settings. Streaming proxy settings area is empty.

  Hello Adelek,

  Thank you for posting.  It seems that you may have a firewall problem.  I that you would suggest to check your firewall settings to see if it's to allow access of media player.  I've also included some basic information about this error.

  Please let me know if this helps you.

  You got the C00D1198 error message when you use Windows Media Player. The following information can help you resolve the problem.

  Unable to connect to the server

  Windows Media Player cannot connect to the server that hosts the content you want to listen to. You may encounter this error message for the following reasons:

  • The name of the server that hosts the content is not valid. If you typed an address Uniform Resource Locator (URL) in the open URL dialog box, verify that the file name is spelled correctly and that the path to the file is correct, and then try again. If you clicked a link on a Web page, the link isn't valid.

  • The server is not available (for example, the server is busy or not online). Try again later.

  • For Windows Media Player proxy server settings are not configured correctly. Verify that your proxy server settings are correct.

    To check your proxy server settings

    1. Click the arrow below the now playing tab, and then click More Options.

    2. Click the network tab.

    3. Check your settings in the Streaming proxy settings area.

       Note

       • If you don't know what your proxy server settings should be, on the network tab, select a Protocol, click on configure, then select Autodetect proxy settings or use the the proxy settings of the browser (available for HTTP protocol only).

  Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I'm unable to connect to Microsoft Lync. "Cannot connect because the server is temporarily unavailable."

  original title: Microsoft Lync

  Unable to connect to Lync

  Cannot connect because the server is temporarily unavailable.
  If the problem persists, contact the support team.

  Well, given that the server is temporarily unavailable, you cannot connect. If you wish to contact the support team, you contact the Lync support team. Nothing to do with this forum.

• How to send photos by mms from the server?

  Hello

  I am currently working on mms app.what I do is first download the image of the server and then send.

  but there is a string currentLocation (location of the file we want to fix) parameter to MessagePart.

  so I use it directly from server how can I achieve that.

  pls help...

  thankx.

  Hello

  My problem was solved by using

  Bitmap image=imageObj.originalImage[0];
              PNGEncodedImage encodedImage=PNGEncodedImage.encode(image);
              byte[] contents=encodedImage.getData();