The sidebar to view the columns of the table without opening table

Similar Questions

• How to remove the incoming without opening mail

  I received several false e.mails with him come from various banks which I have no connection. I would like to remove these without opening, but to delete it seems that you first need to open them. Any contributions to this issue would be appreciated. Thank you.

  I think you're too disturbing. TB run scripts in messages, so unless you click on anything, it may not launch content secret. You could cut HTMl to prevent the webbugs.

  You should find that right-click then delete will do the job.

• During the first loading of Adobe Story more, what do you do if the program loads at all times throughout the day without opening?

  When I open Adobe Story, he constantly load without opening... What should I do to fix this?

  Turns out that I signed in on another computer and it didn't. So to get more Story to work on the computer I was on, I first have to disconnect from the other computer.

• Modify the document without opening it?

  Hi all

  is it possible to edit a document without opening it?

  THX

  filePath returns the folder that the file is in the file name. You must use the full name, which is the path of the file with its name.

  Peter

• In Win 7 keys on the Microsoft Natural ergonomic Keyboard 4000, Firefox & Thunderbird quick launch only throw in the toolbar, without opening the program, then blurred

  Although these keys to quick launch on this keyboard worked fine on this computer Windows XP, when I switched to Windows 7 64 bit, they started having this problem, but only with Firefox and Thunderbird. If I program these keys to open other programs, they do not have the problem. Therefore, something Firefox/Thunderbird, Win7 64-bit compatibility and software of this keyboard (latest version).

  When I press one of the keys to quick launch on this programmed keyboard for Firefox/Thunderbird, they display a rectangle of program in the taskbar only, but no program opens on the screen. When I move the mouse over this rectangle in the taskbar, the program opens immediately, but to focus.

  I also tried to reset Firefox, but this does not change the behavior at all.

  There are a few users of Thunderbird here, but you could probably get better press here dedicated support site: https://support.mozillamessaging.com/

• access to multiple documents contained the textlayers without opening the files

  In the MacIntosh forum, the question has been asked if multiple photoshop files can be performed for text-content.

  Now setting up a selection interface, open selected files and do a file-by-file-and-textlayer-by-textlayer-search in Photoshop should not be too hard, but the real intention was to thin stencils in a document Indesign, avoiding the opening should be a time saver, if it is possible to access the textItem.contents externally.

  With readIn() (a technique that I was introduced to here about pdf-pagecounts), I got as far as to notice that the text seems to be between 'Text' and a hook closing, but frankly the code baffles me.

  And in addition to the problem of the closure of parentheses in the text what I got so far includes some texts twice and adds a few digits in the result.

  Any help appreciated.

  And here are my settings for the version of Paul.

  function main() {
    var file = File("~/Desktop/tmp/filename.psd");
    file.open("r");
    file.encoding = 'BINARY';
    var dat = file.read();
    file.close();
  
    var result;
    var pos =[];
    var Text= [];
  
    var rex = /TxLr.+Txt TEXT/g;
  
    while ((result = rex.exec(dat)) != null) {
      pos.push(result.index+(result[0].length));
    }
  
    function readByte(str, ofs) {
      return str.charCodeAt(ofs);
    }
    function readInt16(str, ofs) {
      return (readByte(str, ofs) << 8) + readByte(str, ofs+1);
    }
    function readWord(str, ofs) {
      return (readInt16(str, ofs) << 16) + readInt16(str, ofs+2);
    }
    function readUnicodeChar(str, ofs) {
      return String.fromCharCode(readInt16(str,  ofs));
    }
  
    for (var i = 0; i < pos.length; i++) {
      var ofs = pos[i];
      var textLength = readWord(dat, ofs)-1;
      ofs += 4;
      var str = '';
  
      for (var j = 0; j < textLength; j++) {
        str += readUnicodeChar(dat, ofs);
        ofs += 2;
      }
      Text.push(str);
    }
    alert(Text);
  };
  
  main();
  

• View long column in a table

  Hello
  
  I'm trying to display a large column (4000 characters) in a tabular presentation (it is NOT editable) and 5 or 6 other columns not so long. What I would do is perhaps show the 50 first or so characters, then when the user points to the field it shows the whole field, or maybe make a popup LOV where the display value corresponds to the first 50 characters and then the popup displays the integers 4 000 characters for this field. I'm not having luck with that attempts to write the LOV query but just get the value of the current row in the query. Anyone have any ideas on the best way to do it?
  
  Any help would be most appreciated.
  
  Thank you
  Mark

  Hello

  Take a look on: Re: interactive research report

  What links to: http://apex.oracle.com/pls/otn/f?p=33642:277

  In this example, I am simply show «...» "instead of any text in the column, but you can change this according to your needs

  Andy

• I opened a new tab and click on the bookmark in the bookmarks bar, and the web site opens in a sidebar. I want it open in the window with full tabs.

  I love Firefox, but this problem frustrates me. I want to access a favorite site and have bookmarked. When I click this bookmark, the site opens in a sidebar! How can I open in the window of the tab complete?

  You can change the properties of the bookmark for this problem.

  If you right click and choose Properties, you will check a box to the bottom of the dialog box that opens the bookmark in the sidebar. Uncheck the box that and click Save.

  It work?

  (When you use a link on a Web site to store a bookmark, they added in this way. You can use Ctrl + d or the 'star' of the address bar to add the bookmark without opening it in the box.)

• How to not display the column heading in the table view?

  I don't want to display the column header in the table display, how I can make?

  If you use JavaFX 8, you can use the following text in an external style sheet:

  .table-view .column-header-background {
    -fx-pref-height : 0 ;
  }
  

  If you use JavaFX 2.2, the - fx-pref-height attribute is not available in css, so I think that you must resort to a search:

  final Region tableHeader = (Region)table.lookup(".column-header-background");
      tableHeader.setPrefHeight(0);
  

  As always, I am obliged to point out that I don't really like the research. Sometimes, they seem to be the only way, however.

• How to dynamically add columns to the table

  Hi all

  I'm new to ADF and need help on sub condition.

  We have created a ViewObject on the EMPLOYEE table that has under columns:

  EMP_ID,

  EMP_NAME,

  DEPARTMENT,

  COST_CENTER,

  BUSINESS_UNIT

  COUNTRY

  GCODE

  We need to create a page in the ADF with employee table to show only below the columns

  EMP_ID,

  EMP_NAME,

  DEPARTMENT,

  COST_CENTER

  Later, if necessary user should be able to add other columns to the page dynamically.

  Can you please advice on how to implement this feature.

  Thank you.

  Kind regards

  Vidya

  Hello.

  There could be a simple solution, which is to use the component PanelCollection.

  Drag ' drop your VO to a page and create a Table with all the attributes.

  For columns that emp_id, emp_name, cost_center, set the Visible property to false.

  Put the PanelCollection component on your page and drag your table inside.

  When you run the page you will see the view menu in the upper left corner of the table above. You can show/hide columns in this menu.

• How to join two tables if you transpose the rows, columns and rows in one of the table

  Hi guys,.

  can someone help me please in the write request

  I have two tables

  Agents and Agent phones but in the agent phones table for the id of an agent it displays 4 rows because one of the column there types of different phones (office, mobile, home, fax)

  So instead of display 4 rows, I used max(case...) to convert rows to columns

  now how to reach it with another table

  Requirement:

  Database: 11.2.0.2.0

  create the table AGENT_PHONE

  (

  agent_id NUMBER (20) not null,

  agent_type_code VARCHAR2 (10) not null,

  agent_type_prefix VARCHAR2 (10) not null,

  Phone_Number VARCHAR2 (16) not null,

  phone_type_code VARCHAR2 (10) not null

  )

  CREATE TABLEAGENTS

  (

  agent_id NUMBER (20) not null,

  agent_type_code VARCHAR2 (10) not null,

  agent_type_prefix VARCHAR2 (10) not null,

  NAME VARCHAR2 (40) NOT NULL

  )

  INSERT INTO AGENT_PHONE(AGENT_ID,AGENT_TYPE_CODE,AGENT_TYPE_PREFIX,PHONE_NUMBER,PHONE_TYPE_CODE)

  VALUES (29709, ARE ', 'OFFICE', '4805551436', 'CELL');

  INSERT INTO AGENT_PHONE(AGENT_ID,AGENT_TYPE_CODE,AGENT_TYPE_PREFIX,PHONE_NUMBER,PHONE_TYPE_CODE)

  VALUES (29709, ARE ', 'OFFICE', '1111111111', 'PHONE');

  INSERT INTO AGENT_PHONE(AGENT_ID,AGENT_TYPE_CODE,AGENT_TYPE_PREFIX,PHONE_NUMBER,PHONE_TYPE_CODE)

  VALUES (29709, ARE ', 'OFFICE', '2223334444',' OFF');

  INSERT INTO AGENT_PHONE(AGENT_ID,AGENT_TYPE_CODE,AGENT_TYPE_PREFIX,PHONE_NUMBER,PHONE_TYPE_CODE)

  VALUES (29709, ARE ', 'OFFICE', '5556667788', 'FAX');

  INSERT INTO VALUES AGENTS

  (29709, ARE ', 'OFFICE', 'FLY');

  INSERT INTO VALUES AGENTS

  (1234, ARE ', 'OFFICE', 'MIKE');

  SELECT * FROM AGENT_PHONES

  AGENT_ID

  AGENT_TYPE_CODE

  AGENT_TYPE_PREFIX

  PHONE_NUMBER

  PHONE_TYPE_CODE

  ---------------------------------------------------------------------------------------------

  	29709			RE					OFFICE				4805551436		CELL
  	29709			RE					OFFICE				1111111111		PHONE
  	29709			RE					OFFICE				2223334444		OFF
  	29709			RE					OFFICE				5556667788		FAX

  SELECT * AGENTS

  AGENT_ID

  AGENT_TYPE_CODE

  AGENT_TYPE_PREFIX

  NAME

  29709

  RE

  OFFICE

  ROB

  1234

  RE

  OFFICE

  MIKE

  This is so the data we have in both table

  Now, I transposed rows to columns in the table of agent phones so I used the following query

  SELECT AP. AGENT_ID,. AGENT_TYPE_CODE,. AGENT_TYPE_PREFIX.

  MAX (CASE WHEN AP. PHONE_TYPE_CODE = 'CELL' THEN AP. PHONE_NUMBER END) AS CELL.

  MAX (CASE WHEN AP. PHONE_TYPE_CODE = 'OFF' THEN AP PHONE_NUMBER END) AS TURNED OFF.

  MAX (CASE WHEN AP. PHONE_TYPE_CODE = 'FAX' THEN AP. PHONE_NUMBER END) LIKE FAX,.

  MAX (CASE WHEN PHONE_TYPE_CODE = 'PHONE'. THEN AP PHONE_NUMBER END) AS PHONE

  AGENT_PHONE AP

  WHERE AP. AGENT_ID = 29709

  GROUP OF AP. AGENT_ID, AP. AGENT_TYPE_CODE, AP. AGENT_TYPE_PREFIX.

  	AGENT_ID	AGENT_TYPE_CODE	AGENT_TYPE_PREFIX	CELL	OFF	FAX	PHONE
  1	29709	RE	OFFICE	4805551436	2223334444	5556667788	1111111111

  My question is how this to join the agents table so that my output should be like this...

  I want to display all the results in the table of the Agent, even if they are not in the table of agent phones. As you can see there are other agent id 1234 is also populated

  AGENT_ID

  AGENT_TYPE_CODE

  AGENT_TYPE_PREFIX

  NAME

  AGENT_ID

  AGENT_TYPE_CODE

  AGENT_TYPE_PREFIX

  CELL

  PHONE

  OFF

  FAX

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  	29709		RE					OFFICE					ROB			29709		RE					OFFICE				4805551436		1111111111		2223334444		5556667788
  	1234		RE					OFFICE					MIKE

  Currently, I run this query and I get the output as below

  SELECT *.

  AGENTS HAS

  LEFT OUTER JOIN AGENT_PHONE AP

  ON A.AGENT_ID = AP. AGENT_ID

  AND A.AGENT_TYPE_CODE = AGENT_TYPE_CODE.

  AND A.AGENT_TYPE_PREFIX = AGENT_TYPE_PREFIX.

  	AGENT_ID	AGENT_TYPE_CODE	AGENT_TYPE_PREFIX	NAME	AGENT_ID	AGENT_TYPE_CODE	AGENT_TYPE_PREFIX	PHONE_NUMBER	PHONE_TYPE_CODE
  1	29709	RE	OFFICE	ROB	29709	RE	OFFICE	4805551436	CELL
  2	29709	RE	OFFICE	ROB	29709	RE	OFFICE	1111111111	PHONE
  3	29709	RE	OFFICE	ROB	29709	RE	OFFICE	2223334444	OFF
  4	29709	RE	OFFICE	ROB	29709	RE	OFFICE	5556667788	FAX
  5	1234	RE	OFFICE	MIKE

  I want id 29709 agent in a line with 1234 agent also id to display

  You can rotate your phone number of agent in columns

  Select *.

  of AGENT_PHONE

  pivot)

  min (PHONE_NUMBER)

  for PHONE_TYPE_CODE in ('CELL' as a 'CELL', 'PHONE' like 'PHONE', 'OFF' in the 'OFF', 'FAX' as 'FAX')

  )

  AGENT_ID	AGENT_TYPE_CODE	AGENT_TYPE_PREFIX	CELL	PHONE	OFF	FAX
  29709	RE	OFFICE	4805551436	1111111111	2223334444	5556667788

  Then you can join to view inline or CTE

  with AGENT_PHONE_PIVOT like)

  Select *.

  of AGENT_PHONE

  pivot)

  min (PHONE_NUMBER)

  for PHONE_TYPE_CODE in ('CELL' as a 'CELL', 'PHONE' like 'PHONE', 'OFF' in the 'OFF', 'FAX' as 'FAX')

  )

  )

  SELECT *.

  AGENTS HAS

  LEFT OUTER JOIN AGENT_PHONE_PIVOT AP

  ON A.AGENT_ID = AP. AGENT_ID

  AND A.AGENT_TYPE_CODE = AGENT_TYPE_CODE.

  AND A.AGENT_TYPE_PREFIX = AGENT_TYPE_PREFIX.

  AGENT_ID	AGENT_TYPE_CODE	AGENT_TYPE_PREFIX	NAME	AGENT_ID	AGENT_TYPE_CODE	AGENT_TYPE_PREFIX	CELL	PHONE	OFF	FAX
  29709	RE	OFFICE	ROB	29709	RE	OFFICE	4805551436	1111111111	2223334444	5556667788
  1234	RE	OFFICE	MIKE	-	-	-	-	-	-	-

  Is that what you're looking for?

• How to add the new column in existing table to our desired location?

  How to add the new column in existing table to our desired location?

  For example, I have to add the new column 'course' before the salary column in the emp table.

  I think the best way is to add the column at the end of the table and create a new view with the order of the columns...

  Another option...

  places the data into a temporary table and recreate the table with the correct order of the columns, and then insert data to the table from the temporary table

  Refer

  Add column (from table) in the desired position

  Example:

  CREATE TABLE temp_my_user LIKE)

  SELECT * FROM password);

  DROP TABLE password;

  (Password) CREATE TABLE

  userID NUMBER

  , first name VARCAHR2 (25)

  , middleInitial VARCHAR2 (1)

  (, name VARCHAR2 (25));

  INSERT INTO password (userID, firstName, lastName)

  (SELECT username

  first name

  lastName

  OF temp_my_user);

  DROP TABLE temp_user;

• CDC - J$ triggers in the Table, the view

  Hi friends,

  When we are implementing Change Data Capture, the back end what are the roles of logging table, table of the Subscriber, views and triggers?

  Can someone explain in detail?

  Thanks in advance.

  Hello

  Sure it's covered in another post here - have you tried the search?

  Triggers: Applied to the source table, write the PK columns on insert/update/delete in the Journal table.

  Leaf table: holds the pharmacokinetics of changes.

  Views: knuckles (external) the table of the Journal to return to the source table to complete the rest of the line, deletes only the PK is filled

  The Subscriber tables: here's the clever part - better if you take a look here, once you put in place: CDC framework suppors multiple subsribers to a Publisher - each Subscriber has its own "window" of the changes, he is interested, this is controlled by the journal of lock / extend window options in ODI. The tables of the Subscriber is the owner of the min / max numbers YVERT for this window of subscribers, the display of log data use in a join to show only the window of changes required for ODI to a given subscriber.

  Note: in the newspaper view data, you will find a record of change repeated for as many subscribers you have, this is normal.

  Good luck!

• normalize the schema of the table in a select statement (without view)

  Hello

  I have a table storing a physical value, mean temperature for different locations every minute. The table schema is as following: timestamp (datetime), rental (string), value (number).

  Do you know a way to have a select statement, return of lines with the following data: timestamp, the value at location1, value of place.2 guests, etc.

  This will help me to create time series in he same diagram in my reporting tool.

  This may be possible with a view, but I don't have access to the database, the best I can do is set my a data source such as a select statement.

  Thank you!

  Brahim

  PS. We use Oracle 10 g R2

  Hello

  8e07ad81-CDAE-4c23-b0fb-b6cd117cf5bc wrote:

  Hello

  I have a table storing a physical value, mean temperature for different locations every minute. The table schema is as following: timestamp (datetime), rental (string), value (number).

  Do you know a way to have a select statement, return of lines with the following data: timestamp, the value at location1, value of place.2 guests, etc.

  This will help me to create time series in he same diagram in my reporting tool.

  This may be possible with a view, but I don't have access to the database, the best I can do is set my a data source such as a select statement.

  Thank you!

  Brahim

  PS. We use Oracle 10 g R2

  What you're asking about is called pivoting.  The ahs Forum FAQ page devoted to this topic: Re: 4. How can I convert rows to columns?

  Since you're using Oracle 10, you cannot use the SELECT... Function PIVOT; You can use GROUP BY and CASE instead.

  Do ' t worry not about creating views.  What you can do with views, you can also do it using a WITH clause in your query.

  If you get stuck, please post some sample data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also to publish the results you want from this data, as well as your best attempt to query a specific question.

  Explain, using specific examples, how you get the results desired from data provided.

  See the FAQ forum: Re: 2. How can I ask a question on the forums?

• Manage the new position of the table column / movement event

  How to catch the event when the table view column are repositioned. Essentially, when the column is repositioned at the 5-position 1 position, I would like to upgrade from the db. I searched the API, but could not find one.

  Thank you.