The signing server outage?

Similar Questions

• Is the signing server down?

  I tried to sign my app a few hours this morning, but get errors.

  [INFO] Parsing of the command line options
  [INFO] Bbwp.properties analysis
  [INFO] Validation of archive WebWorks
  [INFO] The analysis of config.xml
  [WARNING] Cannot find an element of
  [INFO] The application of filling source
  [INFO] Compiling applications WebWorks
  [INFO] Packaging of the record bar
  [INFO] Bar complete packaging
  [INFO] Start signing tool
  Error: Server returned HTTP response code: 502 for URL: http://www.rim.net/Websi
  GNER/servlet/RDK-Waterloo
  [ERROR] Signature failed

  Is it just me or others have the same problem?

  Yes the HTTP 502 "bad gateway" error code means that the signature tool could not communicate with the servers of signature.

  Just received confirmation that Tablet OS signature is offline now and people are already involved in getting this service back online as quickly as possible.

  Thank you for your patience and apologies for the temporary inconvenience.

  Adam

• Is it OK for the test server, and the server signs Local point to the same location?

  There seems to be three places where the files of my site: local files, server assessment and remote server.  I am happy with the remote server.  What I'm confused about are the other two.

  I understand that to build a site using mysql databases that I need to set up a test server.  Here is my configuration: Windows 10, CBWMS 2015.1 using XAMPP with the folder root of my site in htdocs.  I tested FormMail, hence the name of the site is formmail

  

  So, I open one of my files from the local files (right) Panel, modify it and it save (in the local files Panel).  I then use a preview in the browser to see my changes.  It seems that I didn't need to use was ABLE to move the file to the test server, because the file/s are already here, because as shown in the screenshot, the display of local files as the testing server view are in the same place.  What is the point of the testing server Panel?

  I know that I can put the Panel on the left with the remote server. This will allow me to sync with my ISP host.  If I put the left - and probably testing server Panel a sync is useless because the files are in the same place as the Local file?

  Maybe my setup is incorrect.  I guess my question is, is it OK for the test server, and the server signs Local point to the same location?

  Thank you gentlemen (and Lady!) I'll go forward with newfound confidence, Bravo.

• the + sign in my server behavior is gray, unable to connect to the database [subject edited by Moderator]

  I am trying to connect to my database, the + sign in my server behavior is gray, impossible to click on so that I can continue my connection to my database and get the answer "unidentified error" when I try to use binding, please help me solve this problem

  use dreamweaverCS6

  Message edited by moderator for clarity.

  Although the server behaviors are enabled in Dreamweaver CS6, they have been deprecated by Adobe and are more supported because the code is outdated and will not work in PHP 7, to be released in a couple of weeks.

  That said, the reason why you get "unidentified error" certainly means that you have not set your test server correctly.

• Sign out of the RDS Server

  I have Dreamweaver CS 6 and use ColdFusion 10.

  I have Dreamweaver to connect on RDS Server and would like to logoff RDS Server.

  I tried to use wrong ID and password and close the application.

  It still shows the database.

  Is it possible to disconnect from the RDS Server and leave the database disappear?

  Your information and help is much appreciated,

  Kind regards

  Iccsi

  Close DW, or switch to another site.

• Thunderbird is a hidden ' mailto: ' line in each email address I put in the body of my message. It screws the processor end on the mail server I maintain upward

  I maintain a club email list by sending plain text commands to him such as:

  Subscribe to [email protected] members

  (If you're old enough you get an idea of which continues to use the web master).

  Thunderbird started attaching an invisible "mailto:" in front of each of the email addresses in my orders and the remote server rejects them. I see these hot links in my sent folder to outgoing mail.

  I have disabled HTML processing and tried to send text only, but hyperlinks are always there in my copy sent the message in plain text box.

  I have POP my mail for some reason, more even than just my own convenience.

  What is going on?

  -russest

  Use ctrl + u to see the source of the message. I think that you will find no sign of the mailto: source, which means it is added to display the link for you. Since it is internal and private to Thunderbird (unless you can prove that it really is in the source of the message), then I don't see how it affects your server. Your server is not looking at Thunderbird, is it?

• iPads not working only not with the cache server

  Hello!

  We have implemented a Server Cache El Capitan... And the strange thing is that it works with macs and iPhones but not with iPads! Has anyone of you ever heard of something similar?

  Thanks in advance!

  Carl

  It works with macs and iPhones but not with iPads!

  There are many variables that affect how to find caching servers Apple devices.  Signed iPads on the same account iCloud like Macs and iPhones, or more precisely, are the accounts that iPads are signed in registered in the same country as the public IP address of the server being cached?  If your organization uses multiple public IP addresses, are the server cache and your DNS server set up correctly in what concerns these addresses?  Did you restart the iPads after implementation of the caching server, so that they immediately "forget" that they have found no update server caching and are forced to review?  (Restart devices - not the server!-is also recommended if you change the public address record in DNS.)  IPads use a different local subnet as other devices, maybe a caching server is not configured to serve?

  We can help you, but we need more information.

• Cannot enable the Web Server (SSL) site on El Cap Server

  ' tLooking for help here, trying to put in place in El Cap 10.11.3/Server 5.0.15 Web services and the no - SSL server comes just in green in the admn, but the SSL server will not activate. I have an a record for the server to an external DNS server mdm.mycompany.com, and which is mapped to the external IP address of my network. I also have the port forwarding enabled on the router to 80 and 443. Customers outside the network can reach the site at http://mdm.mycompany.com on port 80, but not on 443 as told them the server does not accept unsecured connections. This isn't the same problem when the customer has to trust the certificate; The secure connection is totally denied. My intention here is to activate the Profile Manager, so that I really don't like whether or not the sites work, but the Profile Manager requires a secure connection. I use a cert Self singed at least for testing purposes, but I can't. Imagine that which prevents the site SSL itself allowing all the... Orientation/information appreciated, thank you!

  

  Most of the browsers (and probably accessibility service Apple, aka the green dot) reject/warn self-signed certificates. I would go ahead and obtain a trusted certificate. StartSSL.com offers free class 1 certificates and they work fine.

• Pre complains about SSL certificate on the exchange server

  Hello.  I just got a pre and tries to set up to communicate with an exchnage server.  Pre complains and will not set up the connection with this error message: «"SSL certificate error.» Is the date and time correct? ».  The date and time are correct, but the server is running a self signed certificate.  This causes no problems with iPhones that use a lot of people here.

  How can I fix it?  It is not all parameters for this problem.

  I spent the weekend trying to test and understand what was going on.  I found that if I nominated the e-mail server (name after HTTPS: / / in Setup) the same as the name of certificate displayed in the Certificate Manager (Launcher > Device Info > more info > Menu > Certificate Manager), the error should disappear.  The problem for me was that the name of cert in cert Manager was different from address of mail server (in my case server. [domain .local] instead of mail. ([Domain_name] .com).  The transformation it seems to use is:

  (1) find the certificate...

  (2) CN is HTTPS: / / in the installer?

  (3) If no, use error 'Verify the certificate, date and time not correct' (or whatever it is) - If Yes, go to HTTPS: / /.

  (4) Exchange requires safety pin?  If no, proceed to synchronize - if so, use error "unsupported of security policies.

  So I looked more closely CERT and it held several common names (CN) for the cert.  It seems that ANY OTHER DEVICE can filter through the list of common names, and use the one that works.  The Pre uses only (whether first or last, I don't know).

  So, there are two options for the certificate problem (I guess the 3rd is that you can return the phone):

  FIRST SOLUTION

  =====================

  (1) check the name of cert in cert Manager.

  (2) if it is a name that can be resolved DNS (i.e.  [mail]. [mywebsite]. [com]) then change this setting in your exchange installation program in the mail server field beside the HTTPS: / /.

  This will only fix it if your COMPUTER administrator has with permissions on the used field.  It is possible that an alias is used on other areas

  SECOND SOLUTION (as I have done)

  =================================

  (1) ensure that your Certification Authority is installed.  You can do it by clicking START > ADMINISTRATIVE TOOLS > CERTIFICATION AUTHORITY - OR - on a computer on your network using IE/Safari/Firefox and typing http://server/certsrv.  If the page is found, then you are installed, if not, then you will need to have installed.

  NOTE: SBS 2003 WILL AWARD A CERT TO THE IIS WITHOUT THE ROOT CA.  THIS SEEMS TO BE THE PROBLEM WITH THE AUTO CERTS GENERATED I HAD

  (2) If you have not installed it, go to this topic, it is well written to get step by step instructions how to install, create demand for cert, create the cert and install the cert (it took me about 30 min).   http://www.MSExchange.org/tutorials/SSL_Enabling_OWA_2003.html

  NOTE: IF YOU ALREADY HAVE A CERT ON IIS, YOU NEED TO REMOVE IT AS IT IS "DEFECTIVE" CERT BEFORE YOU CAN REQUEST A NEW CERTIFICATE.  YOU MAY BE ABLE TO REINSTALL OVER THE NEW CERT, BUT I DON'T KNOW

  (3) open https://mail.domain.com/exchange on your computer - display details of the cert and save the file on your desktop - if you are using a laptop, you can also install it on your laptop to use for use outside the Office (this is also a good back-up that you can use to get more later if needed again).

  (4) plug your pre in USB mode.

  (5) slide the cert and unplug the USB cable

  (6) go to cert Manager

  7) tap on the icon of "Sun" at the bottom left

  (8) press on the new file cert that you save in USB mode

  (9) to confirm that the new cert appears with the name of the correct mail server

  10) go to the e-mail program and configure the exchange account

  The above will create a REAL root cert (not IIS domain root Cert) that the Pre can work with.

  Really, I don't know that how/why Palm overlooked this possibility because they claimed so-called does not want to sell to companies who need strict security requirements.  For me, it means a small / medium company that has limited IT supports (according to the needs, pay as you or green guy with limited knowledge).  Then, why they test the GER in this environment, I'm not sure.  I bet they were tested on their own network, which has all the correct methods, best practices for the management of cert.  I guess it's like the developers that they have offended and almost lost their support until turned it over and said: 'sorry, we really want make you programs for our platform WebOS. ".  We've just been paranoid for so long salivate us when the bell rings. "They just didn't beta test this well enough.  The sad result of this is that Sprint will have to address all of the sheets because this certificate simple reading process was given only minimal recognition capabilities.

  But having said that - I'm now completely in love with my pre!

  I'm happy to try to help if you need it.  I found a lot of the forum of solutions were not enough detailed, so do not hesitate to contact.

• My computer has been recognizing not my two printers. He says that the printer spooler was not working. So I uninstalled my printer and when I tried to reinstall I received a message that the RPC server is unavailable.

  My computer has been recognizing not my two printers (which I have had for years).  The message says that the "spools of printer was not working" when I tried to print.  So I uninstalled my two printers and tried to re - install.
  Then I get a message that the "the RPC server is unavailable".

  Hello Sue Strong,.

  Thank you for your message.  Let's try the following:
  Click 'Start' > right click on 'My computer' > select 'manage '.

  Click the (+) sign next to "Services and Applications" > select 'Services '.

  On the right, find and right-click "RPC Remote Procedure Call ()" > select "Properties".

  Select the "Recovery" tab, then successively in first failure, second failure, etc. "restart the Service"

  Validate the change OK
  Stay in the services menu.
  On the right, find and click on "Print Spooler" > select "Properties".
  Click on the 'Start' button and check the "Startup type" is set to "Automatic" and click OK.
  If these steps resolve the problem, click HERE for more information and troubleshooting techniques.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Error code: 800ccc0e and the message "Unable to connect to the host server", when you set up Windows Mail to receive discussion group messages.

  I recently signed up for Windows Mail, Windows Vista Help. I have configured my Gmail OK account, but when I click TOOLS then Newsgroups I get the following error: unable to connect to the host server. When I click on show details, he said: Microsoft Community Server: msnews.microsoft.com Protocol: NNTP Port: 119 secure (SSL): 0 Code: 800ccc0e

  msnews. Microsoft.com has not existed for about three years now. MS close their news servers. You can still access newsgroups, but you will have to do with one another as eternal September or AIOE news server.
   
   

• Corrected name of the host server

  I got the notice that ' the host 'SMTP is not found. " Apparently some time back I inadvertently changed the name of the server, selecting from a list and not knowing the consequences. I sent 4 months never email Windows because of this and can not use the Windows mail to in another program.  How can I know a) my real name of the server and b) go back to where I need to solve this problem.

  I think I also need to know the correct account, Protocol, Port etc.  How and where can I find out what they are supposed to be so that I can confirm that they are entered appropriately in order for Windows Mail work. I'm sick think CVS job several that did not get through without my knowledge.

  Please post the error message in its entirety. You can left click on it to highlight then right click to copy and then paste in this thread.

  You know the name of your server? What is your address after the sign @? Who should you pay every month to access the Internet? Have you asked their tech support for account settings correctly?

  Windows Mail: Setting up an account of end-to-end
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish Bruce Hagen MS - MVP [Mail]

• update the windows server 2008 r2 button

  I'm on desktop connection remote
  in the windows Server Manager dialog box

  under the menu items: file Action display help
  There are icons and there are two green icons. one of them has a u turn arrow sign... That is to say the button refresh

  Now when you click on the button update, it updates the process (in our case private queues).
  I need to find the name of the file that triggers the click_refresh event

  While I could write the script at the command prompt to programmatically control and customizing.

  contact * address email is removed from the privacy *.
  or * address email is removed from the privacy *.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Signing server down again?

  Last night I tried to export my version of my application build, but it got stuck at the signing with an error saying

  "Error: server cannot process your request at this time, please try again later."

  So I went to bed. But now the morning again its gives me this error. I closed and reopened momentics.

  Is this only a problem on my end? Or is the signature Server actually down for everyone?

  Thank you

  Theodore

  no problem here

  works well - just made signature

• ACS 5.7 - access to tracking and reporting on a secondary server to the primary server

  My organization has an ACS deployment, consisting of three servers. Currently, the primary ACS server is also the newspaper collector. However, Cisco recommends to a secondary server in the log collector.

  I noticed that I have connection on the secondary server and click on "Monitoring and reporting", I am prompted to connect to the main server because that's where newspapers. I guess if the newspaper collector is on the secondary server and I click on "Monitoring and reporting" of the main server, I will ask you to connect to the secondary server.

  Is there a way of not having to connect twice (once to access the web interface and new access reports)? It seems that deployment of ACS should support a kind of function of single sign-on and once you are connected to a server, gives you access to another without having to log in again.

  Hi David,

  I know that the Cisco documentation mentions the school be the best practical paper collector, however, which in fact means is that the server acting as collector of newspaper should be not authenticate users.

  If your backend is the collector of newspaper that should be fine, as soon as it's not authenticate users (but secondary responds to this task).

  And related to the shift, that of right, independently on the server to which you connect, once you click on "Monitoring and reporting" you will be redirected to the collector of the newspaper and need to connect in it, unless you are currently on the newspaper collector and click on 'tracking and reports.

  SSO between servers would be a good thing but is not available.

  Note: Please mark as answer as appropriate