The size of the pie gets smaller when I send the page

Similar Questions

• Satellite A500-138 - battery gets smaller when it is off

  Hello!

  I recently bought the A500-138 and I noticed that if the computer turns off for more than half a day the battery power is lower.
  For example, after 2 days when the computer does not work at all the battery starts to 88%.

  It it normal or there is a problem with the battery?

  Thank you.

  Hello!

  I n t have any new Satellite A500, but on my Satellite A300, I got the same problem battery gets low when it was off.

  After searching a bit here in the forum, I founded that I disable the Wake-On-LAN feature in the BIOS. In addition, I recommend disabling the function USB Sleep & Charge you can find also in the BIOS.

  It works for you too?

  Good bye

• Power point slides GET small when put in the timeline - a flaw in the Premier Pro?

  I posted a question about a week ago, but maybe that someone else is now online with an easy solution.  Otherwise it is just a defect in Premier Pro.  When I drag the PowerPoint slides in the source monitor, they are big and fill the frame as much as possible.  Vacant space is on the left and the right because the blades are about 4 x 3 and HiDef video is 16 x 9.  But there is no extra space on the top and the bottom.  As soon as I drag them in the timeline, they become smaller and there is more space on the top and the bottom.

  When I asked about this a week ago the only solution offered was to blow up slides in photoshop, that I did not and do not want to buy.  But doing that would reduce the resolution.  Other video editing systems don't do this and make as big as possible PowerPoint slides.  If this seems to be a flaw unless someone knows how to solve this problem.

  Slides imported via Open Office Impress (like PowerPoint) are the appropriate size, but Impress screwed up a lot of slides, so I can't use it.

  Thanks for your comments.

  Go to the first preferences and check the box to check for "scale to the chassis', or right-click of clips already on the timeline and check scale to the chassis. The problem is that the photos that you bring in are smaller than the frame size, for example, if your sequence is 1920 x 1080 and the slides are 1024 x 768, that's why they are too small in the sequence. The Prefs setting does not affect the clips already imported, starts only work on imports again after you change the setting, so you don't have the manual option.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• When I send a page to a Web site to my e-mail address of printers, it displays only the url and not the page

  I have a Photosmart D110 all-in-one and you just bought an Asus Transformer tablet. I downloaded the eprint application and whenever I share a page of a Web site by email to my email address printers that it prints only the URL not the current Web page. Also when I click on the share option it gives me the opportunity to share with the eprint application, but when I do it says it can not read or supports the file due to the size of the paper is not selected.

  Hello

  The HP ePrint does not support pages web impression

  Printing Web pages through email is currently not supported. HP is in the process of developing solutions to support Web page printing for mobile devices.
  

  http://support.HP.com/us-en/document/c03721293

  You can print web pages using the HP ePrint home & Biz using his web browser integrated application:

  http://support.HP.com/us-en/document/c01616126

  Kind regards

  Shlomi

• test page prints fine when I send a page color to print any color comes out and the black looks like

  I have a gateway GX 7022E Prod. D945GBI CPU Intel pent D 32-bit PRINTER HP photosmart 7960 OS Windows XP 32 bit

  No error message last week that I could not print in color my documents or on the Web or my camera... If I hit a test in my printer the roadmap page came out perfect with dark black text and 3 color bars, which were veiny any deep color. To the printer directly, it seems to work... From my computer to the printer it does not print in color but is printed in black & white... I spent hours with all the tools of diagnosis HP WITHOUT HELP I downloaded the new drivers, NO HELP

  Anyone can come up with a fix for me. ;. I forgot to mention that I'm a fool

  Thank you very much

  Gary

  Gary Braverman

  First thing you should check is the print settings in the driver.  You must ensure that the driver know that you want to print in color and black and white only.

  To check/change the settings of your printer driver:

  1. From the desktop, click the Start button.
  2. Click on Control Panel.
  3. Find printers and fax machines.
  4. Once your in the folder printers and faxes, find your printer.
  5. Right click on your printer.
  6. Click on Preferences.

  Now you should be in the area to check the layout and paper/quality settings.  Make sure it is set to print in color.  Don't forget to look through the advanced options.  Make sure that it is located and let me know what happens.

• Why my link fonts get smaller?

  I'm an ammature trying to troubleshoot my pantry of cities with CS5 site and I can't understand why the fonts get smaller when you hover over a link on a page:

  http://www.tewksburypantry.org/other/events.html

  and not on the home page:http://www.tewksburypantry.org/index.html

  Is it possible to adjust this feature?

  Thank you, John

  your link CSS font sizes are different on .john141

  normal link is do-size: medium;

  link hover is 12px;

• Clear the fields - refreshing the Page

  Hello when I send my page, not to delete the fields. I tried with branches and processes, but did not work. Information about the workspace: http://pastebin.com/nk7FL0Ny someone can help me? Thank you!

  I was just focused on your fields of compensation and penetrates only not in the data.  When your data insertion, you must make sure that the point of the process are after him present.  You will notice that I created a new process called Insert Data.  I also have some of your code in comment and put your success message in the 'Success Message' field and added your error message in the field "error process.  Then I was 1 more change to your branch that States include any message of success of the process.

  If all goes well, this should be what you need.

  Paul

• When I try to print a page, I get the entire page of very low, either I get only part of the page. Which setting I'm missing?

  I am trying to print a page of a web page. If I check, 'reduced to fit' print / page setup, I get the whole page but small enough to be useless. If I uncheck 'reduced to adjust', I get only about 1/3 of the page. I tried the % function, and it only changes the size of the narrow portion I see already. How to print the whole page in a reasonable size?

  If Firefox does not use the entire sheet of paper, it can result from Firefox after having extracted the Windows incorrect paper size settings when reading data from the print driver. Compensation it may involve conclusions some mask parameters, but here goes:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste print and make a pause so that the list is filtered

  (3) for each parameter which specifically mentions the problem printer, right click and reset The fastest way is to click with the mouse and press the r key on the keyboard with your other hand.

  Note: In a few discussions involving Brother printers, printer_printer_name.print_paper_data preference was established in 256 and when the user changed it to 1 which, in itself, solve the paper size. If you are using a Brother printer and see a 256 here, you can change the value by double-clicking it or by using the right click > modify.

  Any improvement?

• Computer is turned off, online the page in the window is too small. Can not get it back.

  I turned computer, went online and home page is so small, I can barely read. The window itself covers my screen, but the page is in the middle of the screen of the window, 10 sizes too small. I visited all the Web sites were similarly. This page also. I tried to adjust it myself, but it changed nothing. The display settings have not changed that I am aware, so with the same settings as always, I didn't really know what to change. I tried to use the system restore, but that never worked when I tried it in the past. Indicates an error has occurred and cannot complete. I'd appreciate any help. I'm an amateur, where computers are concerned, but I can get around pretty good if I have good instructions.   Thanks in advance for any help!

  FYI - HP desktop, Windows Vista, IE8

  You might try to go in the Tools menu in Internet Explorer, then Internet Options, then advanced and select Reset.

  Restores system will fail if you have Norton and do not turn off "tamper protection '.

• Need help on why the text size continues to change as I'm typing or research. Need help on why the page disappears when I try to send email or when I try to view a page online.

  Can someone tell me how to fix these issues?  When I type a message by e-mail or through a Web site, I get the microscope & then the text size change automatically if small I can't read.  The other problem I have is that I continue to in getting kicked off the e-mail page or Web page without hitting any other buttons.  When I type an email, and more text size change, I get a message box asking me if I want to leave the page, click ok or if I want to stay on the page, click Cancel.  I always click Cancel, but get kicked off the e-mail page anyway and have to start over.  This happened to someone?   I asked Acer (my brand of windows 7 computer) for help, but they say the warranty that I treat these & have to pay.  I asked Microsoft to help on this, but I have to pay.  I got this Acer Aspire 7540 for about a month.  Cannot get help anywhere.  Anyone know what to do or where I can ask for help?

  Hi Phylomel,

  -Since when are you facing this problem?

  -Do you have yo umake any changes made to your computer before this problem started?

  -This only happens when you access email through Internet Explorer?

  -This happens on all the websites or any websites?

  However, you can try to optimize the settings of Internet Explorer on your computer and check if that helps you solve the problem. Access the link below and follow the steps to optimize Internet explorer.

  http://support.Microsoft.com/kb/936213

  Also, you can check if the CTRL key on the keyboard is sturck and if the program is based on shortcut keys.

  You try to use the on-screen keyboard and check if the problem persists.

  Steps to start the on-screen keyboard on:

  1. click on start.

  2. open the control panel (Classic view).

  3. click on ease of access Center.

  4. click on on-screen keyboard

  You can also try starting an online virus scan to check if your computer is infected and remove infected items and check if it helps you to solve the problem. Go to the link below to run an online virus scan.

  http://safety.live.com

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I have my wells fargo sign on the page now is 1/5 the size

  I hit a key on the keyboard - now my Wells Fargo login screen is 1/5 of normal size. How to get screen back to normal - windows 7.

  You can hold the Ctrl key when scrolling of the pressed Ctrl and - to zoom out.

  Reset the zoom of page on pages that are causing problems.

  • View > Zoom > reset (Ctrl + 0 (zero); 0 + Command on Mac)
  • http://KB.mozillazine.org/Zoom_text_of_web_pages

• Try to change the font size General windows normal to small to launch a cd-rom game

  I'm playing a game on the PC that was installed, but when I try and open the icon it says to my system fornt size must be set to "small fonts", please change the setting using the control panle and restart the game. However, I went to the right place and it is only normal large and extra-large in font sizes. Help, please!

  Hi BrayCorporation,

  · What is the name of the program that you try to play?

  · What is the exact and complete message you receive?

  I suggest you access the game manufactures Web site and check the system requirements and compare them with the specifications of the computer.

  Also check if the game is compatible with the version of the operating system installed on your computer.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When we look something up on the internet, I'm always redirected 4to7 times before I get the page I'm after. What is a virous and how do I get rid of him?

  When I try to go on the internet, after you type in a subject, I get the usual list of items to the choice. But when I try to select one of them, I redirected sometimes up to 8 times before iget the page I want. I redirected pages yellow and many other sites that have nothing to do with what I am looking upward. If it is avirous how can I get rid of him.

  When I try to go on the internet, after you type in a subject, I get the usual list of items to the choice. But when I try to select one of them, I redirected sometimes up to 8 times before iget the page I want. I redirected pages yellow and many other sites that have nothing to do with what I am looking upward. If it is avirous how can I get rid of him.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• When you send an e-mail using Outlook Express, I immediately get this message; "Some errors occurred while processing the requested tasks. Please see the list of errors below for more details"

  When you send an e-mail using Outlook Express, I immediately get this message; "Some errors occurred while processing the requested tasks. Please see the list of errors below for more details". Unfortunately, there are no errors listed below and the green bar is frozen on the screen. The message remains in my Outbox and repeated again and again sending. There is absolutely no record and file sent in my sent box. TIA - Ernie

  You have apparent dbx file corruption. A common problem.
   
  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
   
  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.
   
  After you're done, followed by compacting your folders manually while working * off * and do it often.
   
  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
   
  General precautions for Outlook Express:
   
  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
   
  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3 
   
  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm
   
  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.
   
  Compact often as specified above.
   
  And backup often.
   
  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx 

• How can I get help outlook express? When I send a mail, I get an error message indicating the e-mail was sent not.

  Had problems with Outlook Express.  When I send a mail, I get an error message indicating the e-mail was sent not.  The e-mail has been sent, but it never leaves the output area.  I have to go and delete the e-mail.  Then I don't have a folder of e-mails, except in my deleted file.
  Any help would be appreciated.

  You have apparent dbx file corruption.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx