The software installation will not see a Media Hub on XP but on Vista.

Similar Questions

• The software installation will see printer on network

  I install a Photosmart Premium C410a on a PC brand new win7.

  The installer can't find the printer on the network.

  • I checked that the software on the disc is the current version.
  • I choose 'Advanced' and enter the IP Address of the printer.
  • I assigned the printer and the PC static IP
  • I placed the printer and the PC on its own network with a router and just 2 devices (I tried static IP and auto).
  • I have used several "well-known" cords ethernet connection.

  I can:

  • Ping the printer's IP
  • Connect to the printer by HTTP
  • use the printer with a USB connection

  Did I miss something?

  Is there a solution?

  OK, let me start by saying that I swore off software firewall for many years... I bet you can all guess how this story ends.

  Mea culpa: you guessed it people, I installed the "Internet Security Suite" instead of the free AV program. Well, after 2 days of torture, the firewall is gone and the printer and the software works like a charm! GRRRR...

  Thank you all for not making fun of me (which I richly deserved).

• The Windows Installer will not stop

  I have vista64 and when I use some programs, especially my HP MFP, the windows installer appears every time over and over again. The problem is not with the printer drivers, because I replaced my printer and installed the new software and the installation window returns.

  Hello

  Download the Installer Cleanup Utility from the link below and use it to remove the remains of the latest software installed:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Windows 7 on the new installation will not update...

  Any machine that I use, I have about 5-10 daily I install freshly, I can't get Microsoft Windows updates through the web. I end up having to add the machine with no updates to the domain and use WSUS for updates on the system from one day to the next in the case otherwise it can last 24/48 hours before actually start in Microsoft Windows to install on operating systems updates.

  The Machines are all Dell Optiplex, or series Dell Latitude...

  They range from 7020 9010 desktops and laptops Latitude of 5670...

  Minimum specifications are processors I5, SSD 250 GB and 8 GB of DDR3 memory minimal...

  So I know this isn't a problem with that...

  The Windowsupdate log shows nothing out of the norm...

  It didn't become a problem until version 10 of Windows was held... Now it is almost useless to attempt to run updates the Microsoft Site...

  Is there any solution for this?

  Or do I just have to call Microsoft?

  I actually found a solution to this today...

  Figure that I'd share...

  It requires 3rd party tools...

  But inside, you install a trial version of server 2k8R2 and install a trial version of WSUS. Unless you already have it running on the network... In this case, the production of WSUS works very well...

  Go here: http://download.wsusoffline.net/

  Download the WSUS Offline software (10.6.2 works with windows 7 x 86 and x 64)

  Install it...

  Run it...

  Configure it to pull updates from windows of your WSUS (Http://WSUSServer) Server

  Once you do that...

  Click on the updates that you want to make ISO from the server files...

  Click on check the downloaded updates

  Click on include Service packs

  Click on the box global update Windows 7 X 64

  Click Start

  The software will create an ISO of all approved windows 7 updates from your WSUS server...

  At worst it takes 10 minutes to create the ISO and an another 30 min to install on your desktop...

  You will need a DVD/R

  You will also get invited when you jump the disk in the Windows 7 machine, you want to click on the boxes that indicate automatically, restart and continue, then check the box to stop when you're finished...

  It took me about 30 minutes to run 200 + windows updates, but I've included the Office updates in my ISO as file... so it would probably take less most of the machines on...

• I have XP and had a virus. I removed the virus, but now the system restore will not work. I tried Safe Mode but clings to the confirm restore point selection. Help

  System Restore will not work

  Hi FriendFriend,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  3. you receive an error message when running the system restore?

  I suggest that you put the computer in a clean boot state, and then try to clean boot.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails, then view the event logs to examine the system restore service errors.

  (a) click Start, click run, type eventvwr.msc/s in the Open box, and then press ENTER.

  (b) click on the category System .

  (c) click the Source tab to sort by name, and then look for "sr" or "srservice." Double-click each of these services and then evaluate the event description for any indication of the cause of the problem.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

• The Windows Installer will not stop flashing on my screen as it tries of are flashing just fast I can't even stop it in the manager__ task

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with widows Explorer programs
  • Setup error messages-windows quick flashing guard on my screen, as if it starts
  • Recent changes to your computer
  • What you have already tried to solve the problem tried to get rid of all the old files of RIM software
  Hello
  1. have you made changes on the computer recently?
  2. do you get pop windows installer when you start the computer?
   
   
  Method 1.
  Re-enter the Setup engine
  a. Click Start, click Accessories and then click command prompt.
  b. at the command prompt, type the following and press ENTER after each line:
   
  MSIExec /Unregister
   
  MSIExec/regserver
  
  Method 2.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• installation does not see the printer when I plug

  I have a printer HP LaserJet, 1006 running on a Windows XP 32 - bit attached to a USB1 port system. I have no USB2 ports. The printer works fine, but the drivers are up to date. I downloaded the file (hp_LJ_P1005_P1505_Full_Solution_ROW.exe) and when I run it, and it gets to the point where it tells me to connect my printer, I plug in and turn on and nothing happens. Apparently the installer does not see when I turn on my printer. The problem would be that it is plugged into the port of USB1 and if so what do about it?

  Sorry must have misread your first message.  Before trying to reinstall the software, make sure that the printer and the old software is uninstalled.  The installer can be easily confused by older facilities, in order to ensure that those who are cleaned before installing the latest orders.  Hope that helps.

• I have instaled my creative suite the other day because I had to reinstall windows 7, I had problems while I had to do a system retore that wiped out the installation. I try to reinstall it and that is to say that the Setup program will not initialize, it

  I installed my creative suite the other day because I had to reinstall windows 7, I had problems while I had to do a system retore that wiped out the installation. I try to reinstall it and that is to say that the Setup program will not initialize, it's because I'm trying to reinstall it in a short period of time

  See link below and check:

  https://forums.Adobe.com/thread/1848277

• I have a pavilion p6130fpc and it will not see the drives.

  I have a pavilion p6130fpc that will not see the drives. I tried 3 different hard drives and change the cable and port twice. I have also reset the BIOS and pressed the power button for five seconds after you disconnect without success. Someone at - it any other ideas?

  Willman,

  Unfortunately you are not alone. HP has sold a lot of different models with the M2N78 - motherboard. The problem is that the manufacturer of the Board of Directors (not HP) set up a controller chip NVidia which tended to overheat. Once this chip goes, ur stuck. The SATA ports are controlled by this chip.

  http://h30434.www3.HP.com/T5/desktop-hardware/m8530f-desktop-PC-with-a-M2N78-la-mother-board-doesn-t-see-my/TD-p/181716

• iPhoto will not see all the pic. on the iPhone.

  After installing a new hard drive in the iMac, due to the failure of the original installed, I struggle with having on the iMac iPhoto to see pictures on my iPhone that are older than October 2014. Photos are visible on the iPhone, but iPhoto will not see them which allowed me to transfer and secure them on the iMac. The iPhone is connected to the iMac with a cable to the USB port. Thanks for supporting.

  iPhoto can only see the photos that are in the film.  The older photos have been synchronized to your iPhone using iTunes? Then you can download them in iPhoto. Sync photos from your computer to your device via iTunes - Apple Support iOS

  • You cannot re-import photos synced from your computer to your device to your computer. You can only import photos from your device, or record, in your device to your computer. If you need recover photos synced from your device, send photos of the unit yourself. Then download the photos from the emails on your computer.

  If the pictures are on the Filmstrip, but iPhoto does not always show them, try to upload them to launchinh Capture of Image. It is downloadable from your iPhone to a folder,

  Another reason for only a few photos in iPhoto could be iCloud photo library.  If iCloud photo library has been activated on your iPhone, you can only import those photos that have been uploaded to the iPhone, but not the photos in iCloud. If iCloud library is active, download from iCloud.

• WM 11 will not see the video of the WMV files but will MPG

  WM 11 will not see the video of the WMV files but will be mi/gal.  He plays the sound but not the image. No error displayed either, just this psychedelic carp.

  Hi Tammii,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  Method 1

  This can happen due to the acceleration of video material for the game in the drive try reduce (or cut) great video acceleration by following these steps.

  (a) open settings display by clicking the Start button, clicking Control Panel, appearance and personalization, customization, and then clicking display settings.

  (b) click on Advanced settings, click the Troubleshooting tab, and then click change settings.

  (c) note that some video card drivers do not allow allows you to change the settings.

  (d) move the hardware acceleration slider to zero to reduce or turn off video hardware acceleration.

  Method 2

  This may also occur due to the missing codec required to run the video file.

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  Method 3

  If the previous step fails then try to update the drivers of graphics card on the computer by visiting the graphics card manufacturer's website, download and install the latest driver and check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a new computer running windows but 10, 13 photoshop elements disc.  Insert the disc does not start something going and looking at the files I do not see an installation executable.

  I have a new computer running windows but 10, 13 photoshop elements disc.  Insert the disc does not start something going and looking at the files I do not see an installation executable.  I don't know what to do.

  Download from Download Photoshop Elements | 14, 13, 12, 11, 10

  Install and enter your serial number.

• Creative suite 4 master collection of error installation will not install Premiere Pro, still, indesige, flash, ps4, sequelae.  He was installing everything.  Have tried reinstalling several times.  The firewall turned off and no other programs running. 

  Creative suite 4 master collection of error installation will not install Premiere Pro, indesign, flash, Photoshop and AfterEffects.  He was installing everything.  Have tried reinstalling several times.  The firewall turned off and no other programs running.  Running windows 7 64 bit.  Had no problem with installation on my last computer 64-bit windows 7

  It seems that everything is installed now.  Don't know how, but I think that I opened it as administrator.

  Thank you

  Corey

• How to open a document illustraor silently, so that the user will not see it

  Hi all

  I work with Illustrator CS5 and you want to import a picture (files HAVE) documents Illustrator in another document. When I tried event file-> place work file converted to pdf object. Are there other ways to import the work as it is in another file.

  A work around is: to open files in Illustrator, copy content to the Clipboard, paste it into the desired document layer, close document.

  But I need to open these documents in silent mode so that the user will not see them. Is there a method to open the illustrator silently files?

  Please report a solution or any suggestions would be welcome.

  Thanks in advance.

  
  D.

  Ok. To open a document in your own format in silent mode, you register your file using AIFileFormatSuite::AddFileFormat format. Then in the GoFileFormat Manager, you treat the document, and then return an error code, e.g. kBadParameter. The document never appears and Illustrator shows no error, but you treated the file data. You then extend this technique to work with the files have.

• All the ' * .exe ' programs will not start by simply clicking on the shortcut icon.

  All the ' * .exe ' programs will not start by simply clicking on the shortcut icon.  I need a right click and select "Run as Administrator" to get the program to run. By clicking on the left, a box opens, which says "Windows cannot open this file: file iexplore.exe (example)". ""  It then goes on to ask if I want to use the web or select a program from a list of installed programs. Is there a way to get this back to "normal"?

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 for virus and spyware help
  infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
  international information, see your subsidiary local Support site.

  Microsoft support - Virus and Security Solution Center
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">