The sound from the speaker is saturated

Similar Questions

• A bad sound from right speaker Satellite L655 - 14 d

  Hi all

  My Toshiba L655 - 14 d... gives a bad sound from the right speaker...
  Is there a chance that the speaker is just more or less in place that causes the diaphragm to touch some parts elsewhere?

  IM planning to open my laptop could someone give the diagram for satellite L655 - 14 d.

  concerning
  Jom johnson

  Hello

  It is possible that the speaker is affected, but I wouldn't recommend disassemble the laptop because it would negate your warranty
  Recommend to ask an authorized to check this part.

• No sound from laptop speaker

  I have Dell inspiron N4010 what me about his problem. No sound from internal speakers of my laptop, but during the test (by pressing F12 during startup Dell diagnostics enable) sounds from the speakers correctly in hardware test. Its also in the headphones, not any problem with headphones properly.
  I have try it with various media players but the problem is to stay. Pilot about audio update.

  You may be better to ask a Dell forum, as - http://en.community.dell.com/support-forums/laptop/f/3517.aspx

  Apart from the obvious controls make sure that the speakers are not dumb, so click the "speaker" icon.

  And verification of the sound card is listed and apparently activated and works in Device Manager.

• Multicamera Source sound from 1 Speaker instead of two? HELP PLEASE!

  So, I've been at this for a while now. Am I missing something?

  Simply, I take my 2. The MOV and 1. WAV and I create a sequence of source mulit-camera. Except when I play my time line and it appears in the portion of my program it only time the. WAV of a speaker...

  If I have to break and load the .wav of chronology in the source pane using the hotkey "F" while playing on the speakers... ?

  A screenshot of the ventilated according to the sequence Source Mulit-camera by clip is attached.

  Please help me, thank you!

  Multi-Cam sequence ONLY ONCE FROM LEFT CHANNEL AUDIO, Adobe Premiere Pro CC. MultiCam editing in question first CC First Pro Multicam works not. create sequence camera multiple source w / external audio recorded

  When I do a multi-channel mono sequence, it will do the same as you describe, just out of the left speaker. in this configuration sound only playing the first configuration of 5.1 channel speakers which is left front. If you need a sequence of mono, you can make a new sequence and choose mono, not multichannel. then copy and paste on all the clips of the old order to the new mono.

• iOS 10 no sound from the speaker of the ear or EarPods

  After update of iOS 10 (in 6 s iPhone and 5s) I have a problem then to make or receive calls. Most of the time it is no sound from the speaker of the ear or EarPods and I have to press the speaker during calls to listening. To get back what I have my iPhone and open it again. This seems to happen after that I used once the EarPods.

  Be aware that I have consume EarPods in 90% of my calls and iOS 9 I had no problem at all.

  Hello Billy78GR,

  Thank you for using communities of Apple Support. It is my understanding that you met the receiver and headphone audio problems after update to iOS 10. I know that it is extremely important to be able to hear others during calls. I'm happy to help you to get this resolved with you.

  First of all, I recommend you restart. This can solve many unexpected behaviours. Follow the steps below to restart.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  As you use the headphones on most of your calls, I recommend checking and removal of dust or debris from the helmet. If the problem persists, please refer to the additional steps in the link below.
  If you do not hear a person, a call or a voice message or if the sound is not clear on your iPhone

  Have a great day!

• New iPhone SE no sound from the speaker of the brand

  I just bought a new iPhone SE and I'm getting no sound from the speaker. Does anyone have any ideas on a possible resolution?

  I restored from an iPhone 5 to the top, both phones are on the latest version of iOS.

  Once the synchronization is complete, I ejected the phone correctly. But there is no sound coming from the speaker:

  • Key "secret" in both positions, no sound from the speaker
  • The top volume, using the volume buttons and the sound, no sound from the speaker settings
  • Headset plugged in, sound comes from the helmet, remove them, the iPhone recognizes, but still no sound
  • I tried the music app, ringtone from another phone, videos, podcast app, no sound from the speaker
  • Past the phone power off & on again, no sound speaker
  • Reset iPhone (hold both buttons down for 10 seconds), no speaker sound
  • Reset iPhone settings, no speaker sound

  I begin to suspect it is a hardware problem, but as I am not near the Apple Store, I would try as much as I can before you go this route.

  Thank you

  Hello Andy,

  Thank you for using communities of Apple Support.

  I understand that you have restored your iPhone backup iPhone a precedent, and now there is no sound from the speaker.  Given the troubleshooting you have already done your next step is to restore the factory settings to see if the problem persists:

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  If the problem persists, then please make an appointment with the Apple Store is close.

  http://www.Apple.com/retail/Geniusbar/

  Take care.

• I have no sound from the external speaker

  I connected this morning my iPod in my car, as always. But today I got the only sound from the internal speaker and no sound from the external speaker in the car. So far I have never had problems.

  How did the car system connected to the car?

• 2.1 speaker system-no sound from the left speaker sound

  Its speaker problem

  I have a system of 2.1 speakers - subwoofer, a left and a right speaker. All of a sudden my left speaker stopped working. What can I do?

  Hello

  ·        Remember to make changes to the system?

  ·        You connect the speakers on another computer and check if you are able to hear the sound from two speakers or not?

  ·        What kind of speakers do you use?

  It could be a faulty socket. Try to connect the different speakers to an outlet and check if the problem persists.

  It could be a problem with the sound card drivers, I suggest to uninstall the drivers from the system and reinstall it on the system and check. Follow the steps mentioned in the article below.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• No sound from the speaker Bluetooth (paired together Win7, output device works with other devices). Help.

  Before ask you, I already read half a dozen similar positions on the speakers, Bluetooth and Windows. None of them apply.

  I received one of these portable Bluetooth speakers of tiny "MicroBoom" as a gift. I paired with my phone and it works very well.

  My BT USB adapter detects the speaker when I turn it on (reported as a "MicroBoom bluetooth helmet").

  I click right on the icon for the Volume control in the Win7 taskbar and updated as the output device bluetooth speaker. Sound-bar indicator bounce around, but the speaker produces no sound (Yes, I checked the volume on the device. Turned the wheel to Max. nothing.)

  The "MicroBoom" is listed as "Bluetooth 2.1 + EDR. I tried two different cards of BT. As noted, they both detect the speaker very well.

  No idea what is wrong. Can anyone help?

  [shamelessly copy / paste from a previous post of mine]

  I solved my problem with a laptop Inspiron running 8.1 update on 8.0. That's how I got my HMDX Jam Party work via Bluetooth:

  It is not difficult to match the units;  Simply click on the Bluetooth icon and add a Bluetooth device. You should get combined.

  Now comes the weird part.

  Go to control panel - devices and printers.

  Right-click on 'Jam Party', select control.

  The dialog box opens.

  And the dialog box closes after a second or two...

  And that's what you saw almost:

  

  NOW you see the "Connect" button, right? Remember where it is, cause you have 1-2 seconds to click on it, until the dialog box closes.

  I have no idea why the dialog box won't stay open, but IF you can click on the button to connect, you can get your Jam Party at work.

• Sound is comin from the speaker and headphones at the same time. How to solve this problem?

  Hello! I installed win7 professional and upgrade to ultimate and when I play a music or vdo sound is coming from the speaker and the headphones. I have a 3ghertz Pentium 4 with 1 GB of ram, and it runs the 32-bit version. And also the headphone option is not present in the peripheral reading option.
  Can any1 please please help me?

  We consider that your machine uses Realtek HD audio-
  (Older versions of Realtek HD audio drivers may have a slightly different form, but the)
  basics should be the same).

  There are two ways to set up the helmet when it is plugged into the façade decision-making;
  (1) in Realtek Manager of her go to Advanced Settings feature in the upper right of the window.
  Check the circle next to cut... plugged back.
  When this fact was you must also click on the yellow folder icon below the
  Device settings advanced and check 'Disable protection of jack façade' is clear.
  -Of the drawbacks of this method are that you do not get an option of separate settings for headphones.
  then they use the same environment as your speakers and EQUALIZER settings, but you can use both the
  speakers and the headphones if you wish.
  -Note that with this option, the helmet does not show in Sound Manager window.

  (2) advanced settings in the sound Manager go to Realtek device.
  The check box next to do advance... at the same time.
  This will disable the speakers when headphone is plugged in the socket of the façade,
  and return to the speakers when headphones are disconnected.
  Also check one or more of the boxes below, according to your need.

  -With this setting, there is an option for headphones in the two Windows Sound manager
  and Realtek HD Audio Manager.
  -With this setting, it does not matter which option to use in yellow folder as the setting icon
  is ' either / or '. You cannot run at the same time the speakers and headphones.

  -Note that with games the headset must be connected prior to spear the game, or
  the default set to the speakers.

• No sound from the right speaker / can not configure the speakers

  Hi all

  I have a new computer Sony laptop and just tried plugging in my speakers 2.1 computer inside.  Sound only comes out of the left satellite and a subwoofer.  When I try to set them up in the sound control panel, the installation of the single speaker on the speaker Assistant is stereo and only the first test tone (left) plays from the satellite on the left, then silence (no dial tone test on the right).

  Everything works fine on the built-in Laptop speakers, but they are for computer speakers, so I wish I could use my old speakers when I'm at my desk.

  Sony Vaio and Windows Update Update did not recommend all new drivers for the audio controller.  I downloaded and installed the latest driver on the site from Realtek but that didn't work at all so I rolled it back to the version provided with the system.

  Work fine with my laptop speakers older and my cell phone, so the fault is not with the right satellite is.

  Thank you
  Drew

  Hi Drew,

  Thanks for posting your query in the Microsoft Community. There is no sound from the right speaker in accordance with the description of the problem.

  ·         Did you do changes on the laptop before the show?

  I suggest you follow the steps in the article.

  Tips for solving common audio problems

  You can see these articles for more information:

  Sound cards: frequently asked questions

  No sound in Windows

  I hope this helps. Let us know if you need more assistance.

• No sound from the speaker to the right computer - Satellite A60-124

  Since 2 weeks I have not more of her in the right computer speaker (Satellite A60-124 (the left one works very well fortunately))
  What can I do?

  Thank you

  [Edited by: admin on 21 January 06 20:50]

  Hello

  It sounds like the right speaker is broken.
  Did you check if the headphones work correctly?
  Please check. If the headphones work properly, so I guess that the speaker has a failure. In this case, you must contact the service for a replacement.

  By the way: Please check the Speaker Volume option in the sound and Audio devices.

  Good bye

• Sometimes I can't hear sound from my computer. Even if my volume is up its still does not come from the speaker.

  If I restart the computer I can hear again. But if I restart the computer again its not coming. It's so confusing? No one knows how to fix?

  NOTE * I have no uninstall or install the audio drivers.

  Hello

  Did you change to the computer?

  You can try the following methods and check.

  Method 1:

  Check if your headphones are configured to be used as a Communication device by default instead of the default device, or if the two devices are configured by default. If so, that the fault of headphones, so that Windows will only use when they are connected.

  Check volume settings.

  (a) right click on the speaker icon in the taskbar, then select volume control options.

  (b) click a checkbox on "all devices evolving sound.

  (c) make sure that you have "Default uncontrolled communication device".

  (d) place a check on the speakers and headphones.

  Method 2:

  I suggest you to return the item and check.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method 3:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  See also:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• How to get sound from the speaker, while the headset is inserted into the laptop?

  In my laptop 15-E034tx Hp - Pavilion, I used the headset. While disconnecting the headset, the headset was broken. And headphones Jack of 3.5 mm of endpoint kept inside the laptop. You cut the wire. Only the tip of the helmet is inside the laptop. Now the speaker does not work because of this problem. If the headphone out only the speaker will work. Now, I want to how to disable the headset using software or Windows operating system?

  You should check the sound setting and depends on your sound card.

• No sound from my Mac, all THE

  Hello

  Earlier today, I connect my Mac to listen to the music and the sound no longer works. I checked the system preferences and went to the sound option. I looked out, and the only thing available was my apple tv.

  As you can see, the mute box he checked and gray. I been to countless forums telling me that the red light in the headphone needs to be reset for the internal to appear again speaker. Well... There is no red light at first. I tried to reset the thing of LANDAU and he just a gray screen as a thing that is like the terminal because you can do almost anything on the mac from there. I didn't know where to go from there, because the only thing that told the forum is to listen to the startup sound and a few buttons. I don't hear the startup sound at all.

  I don't want to go antics with all that because I don't want to mess up anything else.

  While writing that gave me access to reuse my Soundbar and the volume changer, but the internal speakers still do not appear, and the mute button is still gray and ticked off. No sound from the computer. No matter what. I'll try to reset once more.

  -Kay

  Hi Kay, try this:

  1. Plug your headphones.
  2. Play sounds through them, then stop the track.
  3. Go to System Preferences > Sound
  4. Set on headphones, then remove the headphones.5
  5. Who should provide "internal speakers".