The specified module could not be found. Missing Smclfgzur.dll
Original title: lack of smclfgzur.dll
At startup "the specified module is not found.
Missing Smclfgzur.dll
How to restore this file?
Why would you want to reinstall a file, you don't know anything, that could be a residue of an infection?
Were you being run/installed games on the net?
Tags: Windows
Similar Questions
-
Hi Thahaseena,
Thank you for helping! Finally I solve the problem of the error1324.but there were other questions come, after I did the clean boot and restart the computer then log, the window came several times put warn against the "Rundll":) 1 awuspn.dll 2) error loading yabbyx.dll loading error (both happened to uo WARNING several times). And boths display the message "the specified module could not be found. I tried to restore the computer to the State at the beginning, but it has no will to restore before the own boot.would you please help me to solve this problem again?
Thank you
Well, I want you to do is run MalwareBytes. You say you already ran MalwareBytes after the clean boot, and then tried to reload regularly?
Whatever program you have downloaded to fix the missing image file sounds like he came by malicious software. What is the name of this program.
--
Gina Whipp
Microsoft MVP (access)Please post all responses on the forum where everyone can enjoy.
-
Original title: Missing Dll message
I get the following message is displayed after the start of my laptop... "... error rundll error loading kbdsnb.dll... the specified module could not be found.
It does not appear when I search this file on the net? What is this error and how to fix it?
Thank you
Hi heshie75v,
1. does the computer boot to the desktop?
2. don't you make changes before the show?We assume that the computer starts on the desktop after ignoring this error message. We recommend that you check if a non-Microsoft program is defective. To do this, try the following steps:
a. open the article: http://support.microsoft.com/kb/310353
b. method 2, follow steps 1 and 2, and then restart the computer to see if the problem persists.
c. If the problem does not persist in the boot, then follow step 3 and step 4 to find out which is the origin of the problem, and once you have found the culprit, uninstall the program and check the result.Note: Don't forget to follow the steps in the steps to configure Windows to use a Normal startup state"" section.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Rundll. The specified module could not be found. Download error.
Hi, during downloading, I get the same error message: as the rundll module not found. What should I do to remedy this situation?
Win Vista Ultimate-, 64-bit OS. SP2, IE9.
[Moved from comments]
Hi Norman,
Thanks for posting your question in the Microsoft Community forums.
I see from the description of the problem that you are unable to download and receive the message error "Rundll, the specified module could not be found".
I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
To provide the proper resolution, that I would need more information on your side.
1. is the specific issue when downloading any file or download from any particular Web site?
2. did you of recent changes on the computer before this problem?
This problem can occur because of a missing or corrupted Rundll32.exe file, conflict between software on the computer or due to infection by the virus.
Method 1:
Let's first virus scan run using the Microsoft Safety Scanner to make sure that the computer is virus-free.The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Warning: If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.
Method 2:
If the problem persists, we will start the computer Safe Mode to check if the problem occurs in Mode safe. If the problem does not occur in Mode safe mode, and then try to set the computer in clean boot state to find what startup item or service is causing the problem.Step 1:
Start the computer in safe mode.
Check out the link:
Startup options (including safe mode)
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
Step 2:
To run minimum, follow these steps.By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.
Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with the download, I'll be happy to help you. We, at tender Microsoft to excellence.
-
It appears to start on the last page of office?
How to fix or get rid of this coming on all future start-up?Original title: run dll X error loading C:\users\gary\appdata\local\apple\adobe\wrtmnpl.dll the specified module could not be found.
Hello
Thanks for posting your question in the Microsoft Community Forums.
You get an error at startup. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.
Please answer these questions-
(1) that you get an error code?
(2) did you do changes on the computer before the show?
I would like more information about the issue.
Method 1-
Step 1-
You should check if the problem occurs in Mode without failure.
See the article-
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Note: Make sure you connect in Normal Mode after all the troubleshooting steps.
Proceed to step 2, if the problem does not occur in Mode without failure.
Step 2-
I recommend you to perform a clean boot.
Placing the computer in a boot minimum state helps determine if third-party applications or startup items are causing the problem. You must perform the steps in the article-
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Note: You must follow the step 3 of the article to return the computer to a Normal startup after you perform all the troubleshooting steps.
Check if the problem persists.
Method 2-
I would have you scan a System File Checker to verify violations of integrity.
See the article-
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
We know if you need help. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.
Thank you.
-
On reboot, I get a RunDLL message "error loading C:\Users\...\AppData\Local\odokiwikisoxe.dll. The specified module could not be found. How can I fix?
Hi MelP1802,
· How long have you been faced with this problem?
· You did it last changes before the show?
Follow the mention of steps in the Microsoft article and lets us know if the question get it fixed.
Method 1: I suggest you perform the clean boot and check.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Method 2: Try the SFC scan on the computer.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 3: Also I suggest you analyze your computer Microsoft Safety Scanner, it will help us to get rid of viruses, spyware and other malware
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Hope this information helps.
-
Original title:
ReplSync.dll - error loading DLL cannot load resource dll: REPLRES. RLL the specified module could not be found
I get this error message whenever I start my computer: replsync.dll - DLL Load error can not load the resource dll: REPLRES. RLL specified module is not found Help please? Thank you!
HelloYou did changes to the computer before the show?Method 1:Step 1:
You can try to start in safe mode and check if the problem persists.The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before Windows starts.
Some options, including the mode safe mode, start Windows in a limited State, where only the essential is started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as a possible cause.
Advanced startup options
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
Step 2:If the problem does not occur in safe mode, and then try to perform the clean boot and see if the problem still occurs. Clean boot helps eliminate software conflicts. For more information, see the following link:
http://support.Microsoft.com/kb/929135NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the article mentioned above.
Method 2:
You can run Windows Defender Offline tool.See the following link for more information about the same:
What is Windows Defender in offline mode?
http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline
Windows Defender Offline: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows/Windows-Defender-offline-FAQ
Note: data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.Method 3:
Try the SFC (System File Checker) scan on the computer.SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.
Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.
Reference:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833Let us know if it helps!
-
There was a problem starting msiftb32.dll, the specified module could not be found
There was a problem starting msiftb32.dll, the specified module could not be found
There was a problem starting msiftb32.dll, the specified module could not be found
This will help...
How to fix Msimg32.dll not found or missing errors -
Error message @ boot Win 7 Pro "there was a problem starting C:\programdata\ofpviaowu.dat - the specified module could not be found."
This error message appears whenever I have start my computer and windows starts (Firefox doesn't start up). 15.01 Firefox work properly otherwise.
This started after I installed the 15.0.1 patch.
I uninstalled and reinstalled Firefox but the problem remains. Search Google for "ofpviaowu.dat" came with "2012-08-29 Firefox version 15 startup Crash Report" as the only listing.
Is this a Firefox problem?
My system has this file: C:\ProgramData\Mozilla\logs\. I don't think that Firefox or update service should write directly to the root of C:\ProgramData\. It could be a configuration error, or it could be completely different.
You may be able to remove your boot sequence problem .dat file using Microsoft Autoruns utility: Autoruns for Windows. If you find an entry, can describe you it?
-
Hi people, I have a project in VB. NET (VS2010 specifically), which has been updated from an old VB6 project. The old project
use Niglobal.bas and Vbib - 32.bas to communicate with the GPIB plugged into one of our litters.
Now in the 64-bit Win7 with the Niglobal.bas and the Vbib - 32.bas converted to Niglobal.vb and Vbib - 32.vb,.I get an error when debugging to
Public void RegisterGPIBGlobals()
in the Vbib - 32.vb, the error msg says:
Unable to load DLL 'Gpib - 32.dll': the specified module could not be found. (Exception from HRESULT: 0x8007007E)
It seems like this Gpib - 32.dll, that I found under SysWOW64 on my Win7 is not designed for a 64-bit application and when I copy this dll file on
C:\Windows\System32, the msg of error becomes:
An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
So I think my question is double: 1. the drafting of my own app in VB. NET can I still use Gpib - 32.dll (including the Niglobal.vb and Vbib - 32.vb)?
2 Will the application I am writing with .NET work in x 64 Windows 7?
The Almighty gurus and Mods please help. Thank you!
Hi Joel, thanks for the answer! I have the 3.0.2 driver.
I was looking around for a while after I posted here and further in the use of NI4882 manual, page 4-4, I found this:
«To bring an application in an environment 64-bit requires the application to migrate the NI4882 API and be recompiled.»
So I'm ditching the gpib - 32.dll (vbib - 32 & niglobal) and currently I am using NI4882.dll and restructuring of my project.
-
How to erase or correct an error loading RUNDLL that keeps Poppin ' up C:\ProgramFiles\ParetoLogic UUS2\USS.dll the specified module could not be found... error?
Hello
Here is some information on this problem.
The information contained in the link suggest you delete a scheduled entry, if it exists:
http://www.utilitysoftwarereviews.com/how-to-remove-ParetoLogic-uusdll-error-message/
You can also use this program (FREE Autoruns) to find:
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902
See you soon.
-
the specified module could not be found
To start my computer I get the following error: C:\windows\uhowegume.dll the specified module could not be found
It is easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit. If you make a mistake, that's all.These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem. Also, I'd be suspicious of ideas that begin with the words "try." You don't need to try things, you need to fix things. You don't need to try ideas that might work, you must do something that will always work all the time.Here are the detailed instructions that protect you and solve your problem in the 'right' way.There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.It might be a removal of malicious software or an application not installed. The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can still find it. Autoruns (see below) you get the elements no matter where it is.If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer. The msconfig program is not a Startup Manager, that's a troubleshooting tool. Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration. Just disable the display of a start-up error message should not count as a 'solution' to the problem.If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns. The problem can always be found in the registry well.Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.Here is a link to a popular registry backup tool:You can use Autoruns to find the element of start remains little matter where he's hiding. Autoruns does not install anything on your computer. It will display all startup locations where the reference may be then you can turn it off or remove it completely. Here is the download link for Autoruns:Run Autoruns.exe and wait that he at the end of the filling of the list of entries.When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner. Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information. You are really interested only a few sections.The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.Scroll through the list and look for a boot entry associated files in the error message.If you can't find on the connection tab, look in any tab.You can also click file, search to search for logon, or any tab for all or part of the name of the element.Right-click on the offending entry and choose Remove. If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry. If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it. Autoruns shall display the same information however.Given that systems currently has or has had an infection, follow up with this:Perform scans for malware, and then fix any problems:Download, install, update and do a full scan with these free malware detection programs:Malwarebytes (MMFA): http://malwarebytes.org/SUPERAntiSpyware: (SAS): http://www.superantispyware.com/They can be uninstalled later if you wish.Restart your computer and solve the outstanding issues.Do, or do not. There is no test.
I decided to implement the points for a new puppy instead of a pony!
-
Error loading C:\WINDOWS\ubadamujumuqobo.dll the specified module could not be found
loading C:\WINDOWS\ubadamujumuqobo.dll the specified module could not be found
Oh yes, I recommend you either download autoruns and look for the entry of the virus in the long list of items or you run regedit and press contrl + f to search for the string ubadamujumuqobo and delete it. But it can be more risky for you, because you might remove something important. If you find in autoruns, right-click on it and click on see the entry in regedit. Then remove the entry from there. If you can not find in autoruns, make sure you have the skin of microsoft entries in the filter.
Regedit:
Click Start > run > regedit
OR
Press the Windows key + r > regedit-Alex
-
"iphbrbtf.dll the specified module could not be found" error starting
When you open my computer laptop OS xp, got this message at the opening of service pack 3, I got this error RUNDLL XP loading C:\WINDOWS\system32\iphbrbtf.dll the specified module could not be found. How can I remove this annoying message?
It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit. If you make a mistake, that's all.These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem. Also, I'd be suspicious of ideas that begin with the words "try." You don't need to try things, you need to fix things. You don't need to try ideas that might work, you must do something that will always work all the time.Here are the detailed instructions that protect you and solve your problem in the 'right' way.If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.It might be a removal of malicious software or an application not installed. The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it. Autoruns (see below) you get the elements no matter where it is.You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).
If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer. The msconfig program is not a Startup Manager, that's a troubleshooting tool. Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration. Just disable the display of a start-up error message should not count as a 'solution' to the problem.If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns. The problem can always be found in the registry well.Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.Here is a link to a popular registry backup tool:You can also use the Autoruns to find the element of start remains little matter where he's hiding. Autoruns does not install anything on your computer. It will display all startup locations where the reference may be then you can turn it off or remove it completely. Here is the download link for Autoruns:Run Autoruns.exe and wait that he at the end of the filling of the list of entries.When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner. Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information. You are really interested only a few sections.The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.Scroll through the list and look for a boot entry associated files in the error message.If you can't find on the connection tab, look in any tab.You can also click file, search to search for logon, or any tab for all or part of the name of the element.Right-click on the offending entry and choose Remove. If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry. If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it. Autoruns shall display the same information however.Given that your system has or has had an infection, follow up with this:Perform scans for malware, and then fix any problems:
No matter what you use for malware protection, follow these steps:Download, install, update, and make at least an analysis full (not at the same time) with these free malware detection programs:Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_freeSUPERAntiSpyware: (SAS): http://www.superantispyware.com/These comprehensive analyses can take some time, but you really need to run. SAS will probably be just a bunch of Internet tracking cookies, but you can remove them. Once you have done at least a full analysis, you can do quick scans in the future to save time and save the analyses complete for when you have more time or are really suspicious of an infection of the system.
They can be uninstalled later if you wish.In 1985, there were 11 known computer viruses. Today, there is more to 1, 122, 311 and the new threats are detected every day. Always update your virus definitions before running a scan.
Restart your computer and solve the outstanding issues. -
An error keeps coming back that there is a problem starting werconcpl.dll - the specified module could not be found. What should I do?
Hello
· Since when are you facing this problem?
· Were there recent changes made on the computer before the show?
Follow these methods and check if that helps:
Method 1:
This file is a Microsoft Windows System. If you receive the warning on the file, I suggest you to run the latest Microsoft security on your computer Scanner and check if that helps:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.
Method 2: Run scan files (SFC) system auditor
It will scan your computer to check the integrity of files on your system.
The System File Checker (SFC) utility allows administrators to perform an analysis of all protected resources to make sure they are the correct version. Whether SFC should find all incorrect versions in one of these protected resources, SFC will be replaced by the correct versions.
SFC follow the steps in the article to run a scan:
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
-
Original title: Rundll error help
As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." -What it means and how to fix it?
It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit. If you make a mistake, that's all.These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem. Also, I'd be suspicious of ideas that begin with the words "try." You don't need to try things, you need to fix things. You don't need to try ideas that might work, you must do something that will always work all the time.Here are the detailed instructions that protect you and solve your problem in the 'right' way.There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them. If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.It might be a removal of malicious software or an application not installed. The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it. Autoruns (see below) you get the elements no matter where it is.You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).
If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer. The msconfig program is not a Startup Manager, that's a troubleshooting tool. Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration. Just disable the display of a start-up error message should not count as a 'solution' to the problem.If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns. The problem can always be found in the registry well.Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.Here is a link to a popular registry backup tool:You can also use the Autoruns to find the element of start remains little matter where he's hiding. Autoruns does not install anything on your computer. It will display all startup locations where the reference may be then you can turn it off or remove it completely. Here is the download link for Autoruns:Run Autoruns.exe and wait that he at the end of the filling of the list of entries.When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner. Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information. You are really interested only a few sections.The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.Scroll through the list and look for a boot entry associated files in the error message.If you can't find on the connection tab, look in any tab.You can also click file, search to search for logon, or any tab for all or part of the name of the element.Right-click on the offending entry and choose Remove. If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry. If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it. Autoruns shall display the same information however.Given that your system has or has had an infection, follow up with this:Perform scans for malware, and then fix any problems:Download, install, update and do a full scan with these free malware detection programs at:Malwarebytes (MMFA): http://malwarebytes.org/SUPERAntiSpyware: (SAS): http://www.superantispyware.com/They can be uninstalled later if you wish.Restart your computer and solve the outstanding issues.
Maybe you are looking for
-
How can I move an e-mail in my Inbox in one of my folders on a Mac?
at the same time I could click on "move" and select the name of the folder, but this option does not appear.
-
I went to http://www.apple.com/safari/ to install Safari (since youtube complained my current browser, which is also Safari), but there is no link to install anywhere. Is it really bad Web design or is there a reason?
-
I have no other details.
-
BlackBerry smartphones my 8530
My 8350 features the on-screen message recharge software552 that will do this?
-
ACS NAC 5.2 comments Sponor Radius Authentication
For some reason, I can't get the Hall "sponsors" for authentication on the server of comments of the NAC (2.0.2) using ACS 5.2 via Radius. I managed to find a way to get feedback from the NAC authentication Radius for 'Administrator' to work by addin