HP Deskjet F2180 - error C0840001

Similar Questions

• Fatal error during installation of HP Deskjet F2180 Solution Center

  Hello world!

  During the installation of the HP Deskjet F2180 Solution Center, it says "fatal error" - couldn t write the key to '\SOFTWARE' more 'MSI '. GPBaseService2"error.

  I tried several times to completely uninstall all this software and remove the key in regedit and reinstall it. I have also respected the order: first install, after that connect printer. HP Digital Imagiing monitor works but not enough iťs for me. Maybe there is a problem with permissions in Windows, who knows. I just installed Windows 7 Professional 32-bit.

  Could you help me to solve it, please? Each response pleases!

  Hello!

  I have solve it without help. A few key registry could not be written in \SOFTWARE, so I set the permission to write to this folder in regedit and it works!

• DeskJet F2180 + Vista 64-bit

  Hello

  I am currently in the situation that I need to print something, in the case of witch, I decided to use a HP Deskjet F2180 I had laying around. I use Windows Vista Ultimate 64-bit so I thought I was good off to download this file. Appearently that was not the case. It fails during step 3 of 4 of the installation process.

  The error States:

  SourceFile was not "C:\users\***\AppData\Local\Temp\7zSA5E7.tmp\setup\Toolbox\Toolbox1030.cab".

  And then it pops up with another error, a word on ""C:\users\***\AppData\Local\Temp\7zSA5E7.tmp\setup\hpzmsi01.exe " "

  Then it analyzes the log, and this is what is said:

  Error code: 193060200

  Now Launching = x: \hpzmsi01.exe - aioproduct_min l - XXX the list f
  X:\DIVins?. DAT
  Error message received: Sourcefile not found: X:\Toolbox1030.cab
  Make sure that the file exists and that you have access to it. -I am sure that I run the installer as administrator and I have access

  X:\Toolbox.msi failed with return code 1603
  MSIInstall() failed with 1603 for MSI Toolbox
  Exit code = 1603

  I hope that's enough for you give me a way to fix this detailed

  Sincere greetings

  its

  Message edited by its on 2008-11-23 14:46

  Try to download the software from this link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-64285-1 & LC = on & DLC = in & CC = US & Product = 3177562 & os = 2100 & lang = in

  Save your desktop and run it from there...

  Keep us abreast of the concerns

• F2180 errors at startup as follows - hpqst08.exe and HP CUE status root has stopped working

  I have a HP Deskjet F2180 all-in-One Printer Scanner Copier and is connected to a 32 bit Windows Vista computer.

  My F2180 now allows two error messages at startup as follows:-"hpqst08.exe" and then "HP CUE status root has stopped working."

  hpqst08.exe error reads "the application is not properly initialize (0xc0150004).» Click OK to close the application. »

  HP CUE status root has stopped working reads 'a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. »

  I've uninstalled and reinstalled the software, but the error still occurs.  Seems to have happened after an update of Windows Vista (this machine is rarely connected to the Net).

  Any ideas to fix it please?

  Click Start
  In the search window, type services.msc
  Click on the above result that says services (you may need to right click and choose Run as administrator to open)
  Look for the HP Cue (or similar)
  Make sure it is started and in auto mode (automatic not delayed or manual)

  If it is not automatic, set it to that, and then restart the computer.

  If this does not work

  Click Start
  Type msconfig in the search window
  Click on the above result
  Go to the Startup tab
  Uncheck hpqtray08 and hpqst08.exe if it is in the list
  Click on apply, then OK and perform a restart

• Driver for printer deskjet f2180 OSX 10.7.5.

  Is it possible to get a driver for my printer deskjet f2180 will work with OSX 10.7.5. The installation cd does not work and cannot find anything online.

  I hope that it is possible, otherwise I'll have to buy a new...

  Hi Richard,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that you need drivers for 10.7.5.

  I'll be happy to help you.

  There are no drivers HP but I found the driver of HP Deskjet F2100 series from the Apple site that hopefully, will work for you. It's a fairly large download.

  Printer HP v.2.16.1 for OS X drivers.

  It is a list of available printers that are supported.

  OS X: printer and scanner software available for download.

  I hope this helps.

  Thanks for posting on the HP Forums.
  Good day!

• HP Pavilion: Computer says printer HP deskjet F2180 door open, but it is closed

  Computer says printer HP deskjet F2180 door open, but it is closed.  Printer seems to be happy and work OK (no lights telling me that there is a problem) and when I took the cartridges (21 and 22) and then put back them in the printer, he printed the document scan for me.  It's just that, in the section printer HP on the PC, it says 1 document in the queue and printer: door open.  I have tried everything - everything is off for 30 seconds, etc., and time is of the essence that I have things printed on Saturday pm and collated etc..  Help, please!  Thank you, Lindaeleanor.

  Thanks Musicman - I was so desperate that I wore to try anything.  In the end,.

  Click on: Control Panel

  Click on: computer problems

  Click on: use a printer

  It came up with a window named troubleshoot & help prevent problems,

  Click on: next and EXPECTED

  Although at the end it said it could not find no problem - after a second or two the printer suddenly burst into life and it worked great since and I could get my printing done on time!

  Thank you very much for your efforts in replying to me.

  Best regards, Lindaeleanor

• DeskJet 3720: Error on installing HP DeskJet 3720 on Windows 10-536870329

  Hello

  I just purchased this printer, downloaded the driver software and shot to the top of the installation to receive this message:

  

  I googled this problem and I saw a previous post to check the 'setupapi.dev' and 'setupapi.app' connects. Only I have the .dev file and created a new copy during installation to get this message:

  [Device setup log]
  10.0.14393 = OS version
  Service Pack = 0.0
  Suite = 0 x 0300
  ProductType = 1
  Architecture = amd64

  [BeginLog]

  [Start Session: 11/10/2016 11:57:19.278]

  > > > [Import Driver Installation Package - HP HP DeskJet 3700 series\DriverStore\YetiV4\hpygid20_v4.inf C:\Program]
  > > > Section start 18:49:42.120 10/12/2016
  cmd: C:\Windows\System32\MsiExec.exe-Embedding 89C723C91710B0ACD31C8F97E90CE359 E Global\MSI0000
  INF: vendor: HP
  INF: The class GUID: {4D36E979-E325-11CE-BFC1-08002BE10318}
  INF: Driver Version: 08/23/2016,20.79.01.6341
  INF: catalog file: hpygid20_v4.cat
  Pol: {political record driver package} 18:49:42.152
  Pol: {check driver package strategy - exit (0x00000000)} 18:49:42.153
  Sto: {stage Driver Package: C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\hpygid20_v4.inf} 18:49:42.153
  INF: {query configurability: C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\hpygid20_v4.inf} 18:49:42.157
  INF: Driver package "hpygid20_v4.inf" is configurable.
  INF: {query configurability: exit (0x00000000)} 18:49:42.158
  FLQ: copy 'C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\hpgid20v4help.cab' to 'C:\WINDOWS\System32\DriverStore\Temp\{4b55ec52-417b-5b47-9034-517b8a6a912a}\hpgid20v4help.cab '.
  FLQ: copy 'C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\hpgid20v4-bidiEvent.xml' to 'C:\WINDOWS\System32\DriverStore\Temp\{4b55ec52-417b-5b47-9034-517b8a6a912a}\hpgid20v4-bidiEvent.xml '.
  FLQ: copy 'C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\hpgid20v4-PipelineConfig.xml' to 'C:\WINDOWS\System32\DriverStore\Temp\{4b55ec52-417b-5b47-9034-517b8a6a912a}\hpgid20v4-PipelineConfig.xml '.
  FLQ: copy 'C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\hp3700.bag' to 'C:\WINDOWS\System32\DriverStore\Temp\{4b55ec52-417b-5b47-9034-517b8a6a912a}\hp3700.bag '.
  FLQ: copy 'C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\hpgid20v4-bidiUSB-CCB.xml' to 'C:\WINDOWS\System32\DriverStore\Temp\{4b55ec52-417b-5b47-9034-517b8a6a912a}\hpgid20v4-bidiUSB-CCB.xml '.
  FLQ: copy 'C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\hpygid20_3700-manifest.ini' to 'C:\WINDOWS\System32\DriverStore\Temp\{4b55ec52-417b-5b47-9034-517b8a6a912a}\hpygid20_3700-manifest.ini '.
  FLQ: copy 'C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\hpgid20v4-constraints.js' to 'C:\WINDOWS\System32\DriverStore\Temp\{4b55ec52-417b-5b47-9034-517b8a6a912a}\hpgid20v4-constraints.js '.
  FLQ: copy 'C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\hpgid20v4-bidiUSB.js' to 'C:\WINDOWS\System32\DriverStore\Temp\{4b55ec52-417b-5b47-9034-517b8a6a912a}\hpgid20v4-bidiUSB.js '.
  FLQ: copy 'C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\hpygid20_v4.cat' to 'C:\WINDOWS\System32\DriverStore\Temp\{4b55ec52-417b-5b47-9034-517b8a6a912a}\hpygid20_v4.cat '.
  FLQ: copy 'C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\hpygid20_v4.inf' to 'C:\WINDOWS\System32\DriverStore\Temp\{4b55ec52-417b-5b47-9034-517b8a6a912a}\hpygid20_v4.inf '.
  FLQ: copy 'C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\hpgid20v4cfg.gdl' to 'C:\WINDOWS\System32\DriverStore\Temp\{4b55ec52-417b-5b47-9034-517b8a6a912a}\hpgid20v4cfg.gdl '.
  FLQ: copy 'C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\hpgid20v4-bidiWSD.xml' to 'C:\WINDOWS\System32\DriverStore\Temp\{4b55ec52-417b-5b47-9034-517b8a6a912a}\hpgid20v4-bidiWSD.xml '.
  FLQ: copy 'C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\hpgid20v4-bidiSPM.xml' to 'C:\WINDOWS\System32\DriverStore\Temp\{4b55ec52-417b-5b47-9034-517b8a6a912a}\hpgid20v4-bidiSPM.xml '.
  FLQ: copy 'C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\hpgid20v4map.xml' to 'C:\WINDOWS\System32\DriverStore\Temp\{4b55ec52-417b-5b47-9034-517b8a6a912a}\hpgid20v4map.xml '.
  FLQ: copy 'C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\hpgid20v4que.xml' to 'C:\WINDOWS\System32\DriverStore\Temp\{4b55ec52-417b-5b47-9034-517b8a6a912a}\hpgid20v4que.xml '.
  FLQ: copy 'C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\amd64\hpgid20v4PELib.dll' to 'C:\WINDOWS\System32\DriverStore\Temp\{4b55ec52-417b-5b47-9034-517b8a6a912a}\amd64\hpgid20v4PELib.dll '.
  FLQ: copy 'C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\amd64\hpUIMDDialog20.dll' to 'C:\WINDOWS\System32\DriverStore\Temp\{4b55ec52-417b-5b47-9034-517b8a6a912a}\amd64\hpUIMDDialog20.dll '.
  FLQ: copy 'C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\amd64\userfors.dll' to 'C:\WINDOWS\System32\DriverStore\Temp\{4b55ec52-417b-5b47-9034-517b8a6a912a}\amd64\userfors.dll '.
  FLQ: copy 'C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\amd64\hpbxpsv420.dll' to 'C:\WINDOWS\System32\DriverStore\Temp\{4b55ec52-417b-5b47-9034-517b8a6a912a}\amd64\hpbxpsv420.dll '.
  FLQ: copy 'C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\amd64\hpdj_3700_v4.gpd' to 'C:\WINDOWS\System32\DriverStore\Temp\{4b55ec52-417b-5b47-9034-517b8a6a912a}\amd64\hpdj_3700_v4.gpd '.
  FLQ: copy 'C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\amd64\hpgid20v4PE.exe' to 'C:\WINDOWS\System32\DriverStore\Temp\{4b55ec52-417b-5b47-9034-517b8a6a912a}\amd64\hpgid20v4PE.exe '.
  FLQ: copy 'C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\amd64\hpygidres20.dll' to 'C:\WINDOWS\System32\DriverStore\Temp\{4b55ec52-417b-5b47-9034-517b8a6a912a}\amd64\hpygidres20.dll '.
  FLQ: copy 'C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\amd64\hpygiddrv20.dll' to 'C:\WINDOWS\System32\DriverStore\Temp\{4b55ec52-417b-5b47-9034-517b8a6a912a}\amd64\hpygiddrv20.dll '.
  FLQ: copy 'C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\amd64\hpgid20v4_symbols.gpd' to 'C:\WINDOWS\System32\DriverStore\Temp\{4b55ec52-417b-5b47-9034-517b8a6a912a}\amd64\hpgid20v4_symbols.gpd '.
  Sto: 18:49:42.345 {IMPORT DRIVERSTORE VALIDATE}
  SIG: {_VERIFY_FILE_SIGNATURE} 18:49:42.357
  SIG: key = hpygid20_v4.inf
  SIG: FilePath = C:\WINDOWS\System32\DriverStore\Temp\{4b55ec52-417b-5b47-9034-517b8a6a912a}\hpygid20_v4.inf
  SIG: catalog = C:\WINDOWS\System32\DriverStore\Temp\{4b55ec52-417b-5b47-9034-517b8a6a912a}\hpygid20_v4.cat
  ! SIG: audit against specific file catalog (valid) failed! (0x800b0109)
  ! SIG: 0x800b0109 error: a certificate chain processed, but finished in a root certificate which is not approved by the trust provider.
  SIG: 18:49:42.360 {_VERIFY_FILE_SIGNATURE exit (0x800b0109)}
  SIG: {_VERIFY_FILE_SIGNATURE} 18:49:42.360
  SIG: key = hpygid20_v4.inf
  SIG: FilePath = C:\WINDOWS\System32\DriverStore\Temp\{4b55ec52-417b-5b47-9034-517b8a6a912a}\hpygid20_v4.inf
  SIG: catalog = C:\WINDOWS\System32\DriverStore\Temp\{4b55ec52-417b-5b47-9034-517b8a6a912a}\hpygid20_v4.cat
  ! SIG: check the file against specific Authenticode™ catalog failed! (0x800b0109)
  ! SIG: 0x800b0109 error: a certificate chain processed, but finished in a root certificate which is not approved by the trust provider.
  SIG: 18:49:42.362 {_VERIFY_FILE_SIGNATURE exit (0x800b0109)}
  !!! SIG: certificate of catalog file Driver package does not belong to roots of trust and integrity Code is executed.
  !!! SIG: Driver package has no signature validation. Error = 0xE0000247
  Sto: {DRIVERSTORE IMPORT ENTER: exit (0xe0000247)} 18:49:42.363
  !!! SIG: Driver package has no signature verification. Error = 0xE0000247
  !!! Sto: impossible to import the driver package in the driver store. Error = 0xE0000247
  Sto: {stage Driver Package: exit (0xe0000247)} 18:49:42.368
  < < < End section 2016/10/12 18:49:42.370
  < < < [Exit code: FAILURE (0xe0000247)]

  I can't make sense what I have to do to fix this weird problem, please help!

  Thank you

  Ben

  Hello @abenc85, greetings!

  Thank you for becoming a member of the HP Forum. It's a place dynamite to get help from the community, to get suggestions and find what has worked for others.

  I understand that you are having problems during the installation of the Deskjet printer on your computer Windows 10. Try the following steps to resolve the problem:

  • Start by unplugging the USB cable between the printer and the PC.
  • Go to control panel of configuration-programs and features, select all entries of HP printer and uninstall them.
  • Go to control panel, devices and printers, select each printer entry and then select remove printer / device.
  • Now press the 'windows' key + 'r' to open the window "Run" - type "printui.exe/s" and press ENTER.
  • Under the print server properties, go to the drivers - delete any input there as well.
  • Once again go to run the window, type - "c:/programdata" - go to the Hewlett-Packard folder, delete any printer related folders & files.
  • Now restart your computer.
  • Reopen the run window, type "services.msc" and press ok to get the services window.
  • Scroll down to "RPC Remote Procedure Call ()" - right click and go to properties. Make sure that the service is started and the startup type is "automatic".
  • Now, scroll to the top and go to 'Function Discovery Provider Host' - right click and select properties-change the startup type to "manual" and start the service.
  • Repeat the same exercise on "Function Discovery Resource Publication" as well.
  • Click http://ftp.hp.com/pub/softlib/software13/printers/DJ3700_Basicx64_1079.exe and install the drivers.
  • Select the type of connection and then connect the USB cable if necessary.

  Please let me know if that solves the problem, or if you need assistance

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• All-in-one HP Deskjet 3525: error 0XB808DEDE on wifi connect

  I have a HP Deskjet 3525 multifuntional printer. My ISP changed the modem with a new wifi router included. When I connecrt the printer to the wireless network, the Connectine is made, then the printer gives the following error code: 0XB808DEDE. The error code persists and the printer can use should.

  I have tryied hard reset the error is still there. But if I change the wifi network, to another (another wifi router), all things are fine, the printer connects well, error will detect and can be used. Also, if I use the printer with the usb connection, the printer works.

  The only time where it gives the above error is to connect to my ISP router. The router is a router/modem Ubee EVW3226.

  Hello

  I solved my problem. Called my ISP support and it seems that the UBEE router/modem has a bug of incompatibility with certain HP printers. They changed my modem/router with another (Cisco this time) and I get no more error.

  In conclusion, if you got the 0XB808DEDE error code you must you change your wireless router.

  Xaba

• I accidentally deleted my printer HP deskjet F2180 of printers and fax machines.

  How to restore the printer above. I don't know where is the original installation disc.

  Help

  If you want to say that you just clicked on the icon for your HP F2180 and choose 'remove', you don't need the floppy, and you don't need to download anything.  Simply connect the printer to the computer and it should be recognized and installed automatically - because the removal of the icon of the printer has not, in fact, deleted the printer driver.

  If necessary, perform the following steps and install your printer:

  1. disconnect the printer from the computer
  2 reset
  3. connect the printer to the computer

  If this does not work, you'd better explain exactly what you were doing to accidentally delete the printer, as well as what happens when you do the 3 steps above.  If you receive error messages, please do not paraphrase.

• DeskJet Ink Advantage 3545: 3545 Deskjet HP errors

  Hi all

  I have two problems with my HP Deskjet Ink Advantage 3545.It is connected via the wireless network.

  One began two months ago. It was a mistake to NOS_Loader_App 0X83C0000A. I found a way around this problem simply disconnect the printer of decision-making, by restarting the computer and turn on the printer again. If the printer was on, the error doesn't happen until the printer is turned on and turn it on again.

  However four days ago there was a power outage in my area. When the power supply has been restored the printer started showing an "error code 0XB3707004, I couldn't"solve"or work around for two days. The printer has been disconnected overnight and today I tried my luck. The result is that the printer is now running.

  Is there a solution to avoid these problems? A reinstall and restore to the default settings solve the problem? And what should I do, if this problem occurs again?

  Thanks in advance for your answers

  Frank91

  Hi @Frank91and welcome to the Forums of HP!

  I'd be happy to help you to answer the question that you should take a preventive measure to protect your printer from the mistakes regarding. First of all, you have the printer connected directly to a wall outlet or is it in a bar protector or surge rating? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause.   Questions when it is connected to an uninterruptible power supply/Strip/surge protector power

  In this document, you will see, QUESTION: questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector

  ↑ This is not limited to the Laserjet printers.

  The power supply is usually one of the main causes of many problems that can occur. If the problem persists, I suggest performing a hard reset. To do this, leave the printer and unplug the power cable for 1 minute. While it is unplugged, press and hold the power button on the printer for 10-15 seconds to release built his power, then after the minute, plug the printer in.

  If it meets your needs, please consider tagging this post as solved by clicking accepted as Solution below and others can find the answer more effectively.

• HP Deskjet 2540 errors

  I recently bought a HP Deskjet 2540 printer but have experienced many problems with it. Almost every time that I tried to print something, it comes up with an error message and stop Mid-printing, but does not say what is the error. Also, when you try to print something that is the color black and white to save the ink, the preview is black and white but it prints in color. It is now used all of the color ink despite having not print anything in color as he continues to stop printing so I have to restart.

  I looked at and it seems that nobody else is having these problems, it's just my printer? I bought it on Amazon last week and I don't know that I can return it as the color ink was all used (unintentially). Can I do to fix this problem?

  Hello

  Please download and run the HP print and Scan Doctor www.hp.com/go/tools

• Impossible to uninstall HP Deskjet 2050, error: C:\Program HP HP Deskjet 2050 J510 series\bin\HPStatusBL.dll

  Original title: when I uninstall the driver and software for HP Deskjet 2050 I get an error message

  When I uninstall the driver and software for HP Deskjet 2050, I get an error message when I start my computer after starting the error message is:

  RunDLL

  There was a problem starting C:\Program HP HP Deskjet 2050 J510 series\bin\HPStatusBL.dll

  The specified module could not be found.

  My computer is:

  Edition of Windows: Windows 7 Professional 64-bit with Service Pack 1

  Brand: Acer

  Model: TravelMate P645-MG

  Intel Core i5-4200U CPU @ 1.60 GHz 2.30 GHz processor

  RAM: 4.00 GB (3.89 GB usable)

  Hello Nathaniel,

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  I would like to inform you that HPStatusBL.dll is a type of DLL file associated with HP Digital Imaging developed by Print Driver status logic for the Windows operating system.

  This error could be related to issues in the Windows registry. Broken DLL file references can prevent your DLL to register correctly, file giving you a HPStatusBL.dll error or if the product is not uninstalled successfully.

  You can try these methods below and check that helps:

  Method 1: Uninstall programs and features.

  1. By clicking on the Start button, open programs and features .
  2. Click Control Panel in the right-hand menu.
  3. Click programs.
  4. Click programs and features.
  5. Locate the program HPStatusBL.dll - related (for example. HP Digital Imaging) under the name column.
  6. Click on the entry for HP Digital Imaging.
  7. Click the Uninstall button in the Ribbon to the top menu.

  Follow the on-screen instructions to finish uninstalling your program associated with HPStatusBL.dll.

  Method 2: Remove printers from Device Manager.

  Remove printers and uninstall Windows print drivers using printers and Windows devices.
  1. If your printer connects to the computer with a USB cable, disconnect the cable from the printer.
  2. Turn the printer off and then on again once and make sure it is in a ready state.
  3. Search for Windows devices and then click on devices and printers in the list of results.
  4. Right click on the printer icon () for your printer, then click on remove device. Follow the on-screen instructions to complete the process.
  5. If multiple icons are available for the printer, delete them all.

  You can also check:

  http://support.HP.com/us-en/document/c02259020

  If the problem persists, follow method 3.

  Method 3:

  Follow the steps in the given link:

  http://h30434.www3.HP.com/T5/other-printing-questions/need-help-to-completely-uninstall-HP-drivers-amp-software-FM/TD-p/498183

  Let us know if you need more assistance. We will be happy to help you.

  ____________________

  Thank you best regards &,.

  Isha Soni

• DeskJet D2660 - errors Windows 8.1 - don't Print - out

  Hello!

  I have a HP Deskjet D2660. I have a Dell

  Inspiron 15R 5521

  . I have Windows 64-bit of 8.1.

  When I try to print a document, or PDF printer will sometimes just leave the document in the queue and change the "status of mutiple symbols such as *! ^ #% ~ ~ * & instead of saying "printing error, deletion, etc...". Sometimes the HP Solution Center will send a pop up and tell me that the printer cannot print. Sometimes, I get an error of communication. But no matter, I am unable to print whole pages. When the printer decides it wants to print it will show 1/4 of the document and stop with a pop-up that says "unable to print document" Center of HP solutions also appears and says the same thing.

  I tried the "guided" solutions I stopped and restarted the "print spooler" from Device Manager. I have uninstalled and reinstalled my software to print several times as deleted and reinstalled all the drivers of hp associated with this printer model. I ran the HP program doctor. I used the "HP Updater" that tells me that there is no update and I'm updating. All this without result. I need a solution that works and I need it as soon as possible. I'm at the point where I'm ready to take this printer and run it with my truck because being able to print is a very important aspect of my office at home I prepare tax returns and must be able to print. I don't want to change the printer because the printer has always been reliable and does exactly what I need to do it, PRINTING of DOCUMENTS and. PDF files. But now it won't.

  Please help me to get this resolved as soon as possible! I appreciate all the suggestions that I have not tried!

  Knaus Tax Prep

  To solve the problem I bought a used HP F4180 and it works fine with my system. I guess the d2660 is just old. Thanks anyway!

• HP Deskjet 1512: Error applying driver settings, then a problem prevented the scanned Document

  I can't find any question about scanning on this product, I want to post a picture of my screen, but can't. This occurs when you try to scan anything. The first screen comes up with "Error applying settings to Driver" then then once the product has tried to sweep is the error message "a problem prevented the Document are analyzed. I had this product since almost a year and were only able to analyse once. I tried in vain to follow all the troubleshooting steps and nothing works. I'm starting to hate this printer. I uninstalled and reinstalled, restarted my computer and more after each uninstall and reinstall. I unplugged USB and power cords. This software/scanner driver sucks!

  I do not usually bother with these sites, but since I seem to be the only person who knows the solution for application error settings driver with scanners I should share it. I went through three Microsoft technicians and they were at a loss. They usually end by saying that I have installed a bad iso image and need to download a new one and reinstall. But anywho the fix is... run your registry editor and go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage and remove the key from the photo don't worry it will be recreated with the key parameters appropriate because the pilot he rewrites and there you go no scanner error more I have to add that I am on win 10 x 64 with a Canon mp280 printer , but this should apply to windows 7 and upwards.

• DESKJET 3052 error message has 'computer not found '.

  hooked wireless, Windows 8, error message "not found computer" when scanning, is gone in circles with print & scan doctor

  Try connecting the printer to the computer with USB.

  Then, try to scan. Let me know the results.