The STATE of the POWER of DRIVER FAILURE by closing

Similar Questions

• freezing of the iMac. hard drive failure?

  My iMac has been freezing a few days ago. At first I thought it might be a Trojan horse, but I could not detect any. I update my OS to El Capitan, hoping he could solve the problem, but the problem persisted.

  I checked the console and I saw this message continues to flow upward

  kernel [0]: disk0s2: i/o error.

  I heard that this indicates a drive failure. I ran first aid through disk utility, then a test of material using the Apple disc, but nothing was detected.

  I hope that it is would be a software issue and not a disk failure. Someone has an idea how to be course and finally fix it?

  My specs:

  iMac (21.5 inch, mid 2011)

  2.8 GHz Intel Core i7 processor

  12 GB DDR3 memory at 1333 MHz

  AMD Radeon HD 6770 M 512 MB graphics card

  Storage: 164,48 GB free of 829 GB

  I should mention that I run windows via bootcamp on the same drive. I haven't experienced the issue on windows, so is it possible that it is not a hardware problem?

• Satellite A200-1vp with Vista - code 39 of the CD/DVD drive failure

  Hello

  I was burning and watch DVDs on my Satellite A200 - 1 VP, with vista, since February, the last time I burned anything was a couple of weeks.

  Suddenly, there is a problem, no response when I insert a disc and my divx player says me no recorder found.

  When I am looking in the Device Manager I get the message 'windows cannot load the driver for this hardware' (code 39) "driver is damaged or missing.

  I tried to uninstall it and using the limit filter upper/lower of Toshiba, repair tool but on restart it still cannot install.

  Should I try the Toshiba Recovery Disc and lose a lot of that programs/files, as a last resort?
  Would this work?
  Anyone have any ideas?

  Here's an interesting article from Microsoft Knowledge:
  http://support.Microsoft.com/kb/270008/en-us

  You must first access the Device Manager and should remove the reader of CD/DVD from the list of devices.
  Then should access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Reboot the laptop and check if the CD/DVD drive would work again!

• Verification of the DST hard drive failure!

  My laptop is stuck in the hp main loading screen. I couldn't go to my BIOS menu, but after some research, I was able to access it. I did a test of component on the disc harder than I suspect me that it was the failure of hard drive. And the test result is the following:

  Check Hard Drive SMART: PAST

  Hard drive DST Check: FAILURE

  FAILURE ID: U4G081 - 7984 L-MFPV7F-60UX03

  Product ID: H8K09EA #ABU

  I think I need to replace my hard drive. If so can you please suggest me what hard drive, I needed. (IN THE UK).

  THANK YOU

• Windows 7 installation on the new hard drive failure

  Install Windows 7 on a new hard drive. The new HDD is 750 GB Sata 3 GB 7 200 RPM.

  Windows 7 will not finish installing.

  Commissioning of repair using windows in the drive disk cannot complete until the end of Windows 7 install.

  I had installed Advanced. Creates a new 30 GB partition. Windows will create a 100 MB partition. I installed Windows 7 on the 30 GB partition. It will go the whole process until the completion step. It restarts, the blue screen appears. Where, it is said,

  (Attempt to Reset display driver and recover from Timeout failed.)

  If market, it will start to the top and do the samething.

  Before that my old hard drive went bad, I did a Windows 7 upgrade and updated all the drivers. Everything worked very well.

  Now, this is a full installation of Windows on the hard disk again.

  Here is the computer info I had saved.

  HP Pavilion a6250z PC
  -Genuine Windows Vista Home Premium (32 bit)
  -AMD Athlon (TM) 64 X 2 5600 + dual core - 2.8 GHz
  -3 GB DDR2 - 667 MHz dual channel SDRAM (2 x 1024, 2 x 512 MB)
  -512 MB NVIDIA GeForce 8500GT, DVI - I, TV, HDMI out
  -802.11 b/g USB Wireless LAN card & USB external modem
  -HDD 400 GB 7200 RPM SATA 3 Gb/s
  -LightScribe 16 X MAX drive DVD +/-R/RW SuperMulti
  -16 x Max DVD-ROM
  card reader memory 15 - in-1, 1394, 3 USB, audio
  -Tuner TV ATSC-NTSC with PVR, FM tuner, remote control
  -7.1 audio channels w/front audio ports integrated

  What I am doing wrong?

  Thank you for helping me

  I solved my problem.

  I replaced the NVIDIA card and did a fresh install and everything works fine.

  Just a ton of updates and it will be like new.

• Replace the power supply on my m9340f

  Hello

  I own a Pavilion Elite m9340f and I need to replace the power supply (it has the original), because the power on button failure, which I did research on forums and the solution replaces the power supply (psu led always on, for example).

  But I need to know exactly what kind of food I buy (amp, voltage, PIN number, dimensions, etc.) because I need help on the specifications.

  I'm not planning to upgrade the motherboard the case, original hp. I read in another post something on the power restriction and benicia supporting more than 450 watts power supply motherboard. I find this absurd information, because components draw necessary power from the PSU without worrying if it's 350 or 700 watts. So is one of the things that I need to be confirmed if there is restriction of power.

  Thanks in advance,

  Prince of Jeronimo Ramos

  Jeronimo, welcome to the forum.

  I believe that any standard ATX PSU must be inserted into the case.  I like Corsair and OCZ.  They are excellent manufacturers.  I suggest to measure the PSU existing and comparing measures to whichever you choose.  As far as I know, there is no restriction on the power.  I did this for a long time.  More than 550W to 600W in your computer is not necessary, however.

  If your problem is solved, please click "accept as a Solution.

• Hard drive failure is imminent and must be replaced

  HP TouchSmart 610-1020 has

  i5 6 GB RAM 64 bit

  Windows 7 Home Edition Premium--> Windows 8

  Hi there, since a terrible week for me I started to receive the error message:

  Hard drive failure is imminent and must be replaced

  only when am re - / from my PC.

  I made a backup already a few days ago (space available was already 85% - did not much), run all those disk cleanup, defragmentation, analyze and verify programs and there was nothing wrong. I ran all possible controls and it had nothing recorded. I've updated / installed Windows 8 which works perfectly without any problems, no computer crash or that it is, but only sometimes receive a message saying that I need to run/shedule a back, etc.

  As I already mentioned, there was no disk error, no other problems known but still get the message "hard drive failure is imminent and should be replaced" and crazy!

  My questions are:

  (1) what on Earth is happening, there is always a problem with touch smart PC; should he stay away all in a desktop PC and just buy older versions - separate screen and tour, etc.?

  (2) I have no problem and continue to use my PC but wonder what will happen; It will be down, it's just a false error message, what should I do?

  (3) if I have to take it to a service, what should I take care of?

  Thank you for taking your time and wil appreciate for your posts about.

  Alp

  Hello

  What has happened is that the CHIP system reports told you that your hard drive will fail little time. It is good that you have saved.  The fault lies not in all of your PC, but in a single component, namely the hard disk. You own your PC like one year standard warranty is longer.

  You need to buy a hard drive with the following specifications. It of time to find your recovery disc as you need to recover your PC in its delivered State and then apply the upgrade 8 to win again. You can install it yourself or have done by a qualified PC store or from an HP Service Technician. The HP service center is the most expensive option.

  You can avoid having to use the recovery disk and upgrade by a clone of your hard drive on a 1.5 TB external drive. You will be able to migrate the clone on the new diskette with a product commercially available as Paragon Hard Disk Manager 12.

  • Size: 1.5 to

• Hard drive failure is imminent!

  so I had a play and when I started the game, I was told that my computer will restart, then it started me off in the bios with the message "hard drive failure is imminent. IM wondering if I get another HARD drive I will need to get another copy of windows 10 buy or is there a way I can keep the windows 10 during a maneuver on my HARD drive?

  You can simply install the new disk, then start on a key USB W10 and install the operating system without a key, then when you get on the desktop, it should activate.

  Or clone the old disk to a usning new Macrium reflect free, then install the new disk, but if the reader fails it cannot establish so well.

  You can make the USB stick using this tool from Microsoft, you will need a 8 GB or more great drive flash usb, or you can make an ISO file and then burn it to DVD.

  https://www.Microsoft.com/en-us/software-download/Windows10

• I get BSOD on windows 8 and the STATE DRIVER FAILURE error. What should I do?

  I get BSOD on windows 8 and the STATE DRIVER FAILURE error. Never, it happens every time I got close the lid of my portable computer or attempt to put it to sleep. If it helps I have an ASUS S56C ultrabook. I have read other forums and noticed that this problem is related to my minidump file. The link is https://skydrive.live.com/redir?resid=B33EC443BFC08CAF! 239 & authkey =! APosKb0gDrCL_7M. Thanks to all those who can help you

  Hello

  Since there is a new check laptop with the seller and ASUStek support for warranty
  repair. As OEM ASUStek is responsible for the good operation of the equipment both
  and Windows. Keep in mind do you more they tell you it's something
  you did it. Added that even if you are somehow able to solve the problem you
  would that he documented in the case of other problems on the road.

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  =======================================================

  If you really want to solve the problem (which I do not recommend on a new computer
  under warranty):

  Results verified BlueScreenView WinDBG / DumpCHK.

  The Bug_Check has been iaStorA.sys 9F CAUSE i.e. technology Intel Rapid Storage Technology driver.

  9F error checking, {3, fffffa80121cf7f0, fffff800af4687e0, fffffa8013b01c60}

  Probably caused by: iaStorA.sys
  FAILURE_BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_iaStorA.sys

  BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_iaStorA.sys

  iaStorA.sys as of the 09/07/2012 which is Intel Rapid Storage Technology driver.

  fffff880 ' 01638000 fffff880' 01902000 iaStorA T (no symbol)
  Loaded symbol image file: iaStorA.sys
  Image path: \SystemRoot\System32\drivers\iaStorA.sys
  Image name: iaStorA.sys
  Timestamp: Wed Jul 09 13:42:33 2012 (4FFB4239)

  Collate ASUStek support, their drivers and documentation online and ask for their
  Forums about known problems.

  BiosVersion = K56CA.206
  BiosReleaseDate = 21/08/2012<- bios="" is="" fairly="" current="" however="" there="" may="" be="" an="">
  most recent version. Also check updates the chipset drivers and other key embedded
  and separate device drivers.
  SystemManufacturer = ASUSTeK COMPUTER INC..
  SystemProductName = K56CA
  Family = K
  SystemVersion = 1.0
  SystemSKU = ASUS-NotebookSKU
  BaseBoardManufacturer = ASUSTeK COMPUTER INC..
  BaseBoardProduct = K56CA
  BaseBoardVersion = 1.0

  ASUStek links above.

  After checking with ASUStek and if necessary to check updates with Intel.

  For the Intel driver update utility<-- run="" this="" after="" checking="" with="">
  http://www.Intel.com/p/en_US/support/detect?redirector_count=1&

  Intel - <- also="" search="" here="" -="">Quick storage drivers Download Center.
  http://Downloadcenter.Intel.com/

  Forums and Intel - Support - community
  http://intelopenport.hosted.Jivesoftware.com/Community/Tech

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• State of constant power failure (Windows 8 64-bit) driver

  I have two questions: 1. I have read all the previous discussions and update I tried drivers working a little but then I got the same problem. I then started windows 8 Windows 8.1, I've done SFC/scannow, since it's the only thing I have not tried and I got the details of the files corrupted in a newspaper and I can't open it or download it here. How can you help me with the log file? 2. why the driver failure State is so common in windows 8?

  Hello

  The Bug_Check 9F is a very common usually caused by drivers. There are many OEM
  machine manufacturer that drivers are still not compliant or not completely
  pilot tests before their release. Thus the consumer suffers the BSOD.

  ========================================================

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Translate Windows 7 methods and use them on Windows 8.

  Resolution of the blue screen in Windows 8/8.1 errors
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors
  
  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
  Start Windows (applies to Windows 8).
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there. (This isn't
  that would help it a lot on new construction).

  ZIP or download the content of the C:\Windows\minidump (only once you have made
  suggestions initials at the top of this answer and IF the BSOD problems).

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7 and 8)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ==========================================================

  This "might" be a power problem, even if it's not the most common cause.

  9F is probably a driver issue. Antivirus/antispyware/security programs can also cause these problems.
  Have you added the recent devices or the updated drivers - do not forget to check in Windows updates of
  see if a driver has been updated before that happens. This can also be caused by a loose card
  or cable and even a weak power supply.

  This error means that a driver does not properly support the power state. Check in Control Panel-
  Device to be sure management of great drivers are stopped not for sleep - double-click on display
  Adapter - card NETWORK and WIFI - healthy and others - tab power management - uncheck allow
  computer to power off. Maybe the only has a problem.

  (Use EXECUTION instead of start - search such as used on Vista or Windows 7)

  WINDOWS key + X - RUN - type MSCONFIG.exe

  General tab - tick this box start Diagnostic - APPLY / OK - REBOOT

  Try it now. If the computer still blue screens thinks that video driver. Otherwise think the card NETWORK, Wifi, sound, or...
  (and it might still be video interacts with something else). See link to the troubleshooting tool
  above my generic driver update methods.

  Bug Check 0x9F: DRIVER_POWER_STATE_FAILURE<-- read="" this="">
  http://msdn.Microsoft.com/en-us/library/ff559329 (v = vs. 85) .aspx

  BCCode: 9F 0x0000009F<-- read="" this="">
  * 1167.html? order = date http://www.faultwire.com/solutions-fatal_error/Driver-Power-State-Failure-0x0000009F-

  ------------------------------------------------------------

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7 (and Windows 8).
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with
  MyEventViewer at the blue screen.

  If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

  --------------------------------------------------------------------------------------------------------------------

  It's my generic how updates of appropriate driver: (update of your key drivers and BIOS)

  This utility, it is easy see which versions are loaded: (VIEW of the value for hide Microsoft drivers
  (-update those without drain in their names.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now click on
  Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
  Click on - uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Microsoft - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  What happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Moved from VM with Snap Shots, doesn't start: cannot change the power state of VM: internal error

  Hello

  Last week, I decided to move from a Windows host based Linux system. So I went through my VMs their power off and copied to another drive. I then installed 7 Centos and reinstalled VMWare Workstation 12 re-imported the virtual machine in VMWare and I tried to start.

  I received the following message...

  "Cannot change the power state of VM: internal error.

  Suspicious, I looked at the folder that contains the machine virtual and noticed it contained snapshots. DOH!

  I guess it is pretty bad, not sure where to start?

  Any help would be appreciated.

  Thank you

  James

  I copied VM, with and without clichés, without problems. Have a few running on OSX Fusion so

  The first thing I would check would be for folders and .lck files. If so, remove them.

  Lou

• Of failure, white screen MacBook Pro HARD drive try to boot from the external HARD drive

  Hello

  I have a 2008 Macbook Pro which is having some problems, I was able to fix them, but eventually the hard drive failed. I know that because at startup until it would have a white screen Uni (no logo) and you can hear a clicking on in the lower left corner. I thought initially it was a memory problem, but after opening and verification of memory, it's clearly the hard drive.

  I solved this problem temporarily (until I can replace the HARD disk) by installing El captain on an external HARD disc and start from that. Here's the twist, I couldn't he can begin to El captain, I tried CMD + R, CMD + OPT + R, CMD + OPT + R + P and now shift. Everything that's happened would be that clicks would cease to release the keys.

  I left the macbook on while I'm at work, when I got home it was on the screen to connect the external HARD drive.

  I accidentally closed the macbook yesterday and again once when I tried to log on, I could not and I left it on a white screen while I was sleeping. There is a possibility that he may have launched from the HARD drive when I get home, but if not, is there something that escapes me to force do this?

  See you soon

  Usually start up to a blank screen without the Apple Logo, may report one of the following:

  • Hardware failure
  • Boot drive is not recognized as valid and updated updated
  • OS X essential software is missing, hurt moved or renamed or corrupt
  • A firmware update is necessary

  No matter who, in order to boot from an external drive "bootable", you would normally hold down the Option key until you get a screen that offers a number of devices to try to boot from.

  Alternatively, you can try holding down the C key to try to boot from the external drive.

  If none of these startup options work, then the bootable disc or the USB port on your MacBook Pro can be the question.

  Since you have a Mac pre-2013, if you hold down the D key while booting, the built-in Apple Hardware Test should start up.  This can help to identify hardware problems.

• Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Ask an authorized service provider regarding iPhones, a guarantee of a country may or may not be honored in another function where you take the device.

  (143868)

• L50 - A satellite - state of the power supply is lit, but laptop will not start.

  Hello
  A few months ago, I bought a new Toshiba laptop L50 - A Satellite. He worked incredibly in all directions until about a week ago when it lights. He has been connected to the charger with the charging light but does not illuminate. When I press the power button, the small ring of orange around the button light turns on and will be so all the LED lights on the front of the laptop, as well as I can hear the fan and other work items, but the screen remains black. This has been the case for a little over a week now and at random, two of the times I tried to power on my laptop, he turned on and working but then after that be cut, it wouldn't work again. He has not worked since 5 days and since then I tried to turn it on.

  One of my friends who knows a thing or two suggested perhaps it was the display that was defective and should I try to connect it to my TV via a HDMI cable. This seemed logical, so I gave him a test in the hope that he'd at least let me know what was the problem, but no fixed image displayed anywhere.

  My laptop is almost always connected to the charger and an expensive cooling fan, so I guess that battery and components must still work most of the time, and I've read that this laptop is designed so that you cannot remove the battery, but I do not know how to in any case.

  I tried a few different methods to try to start it as now the Start button / stop and the ESC key for 10 seconds, now back while pressing the power button and pressing the power button while pressing F8 repeatedly. But none of them worked so far.

  If anyone has any ideas or a way to help, that would be greatly appreciated.

  Thank you, Julian.

  Hello

  The L50 - A Satellite supports a stop (hole) switch located at the bottom of the unit.

  Cell phone is freezing, do not start or has a power failure, which cannot be resolved by pressing the button for 10 seconds (force shutdown), please use stop force switch instead of the main battery.

  During a stop by pressing this button force, the behavior of the system is identical to unplug the AC adapter and remove the main battery.

  More details here:
  Stop power switch (hole) for models with one main battery sets
  http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

  Hope this helps

• How to change the power supply to the CD/DVD drive so that it is disabled by default?

  When running on battery I often use the icon 'Remove hardware safely' XP to 'unplug' the carpet * CD/DVD drive for Safe some battery life. (Does?) I use Fn + Tab to bring back to life. I wonder if there is a way to make my boot Notebook (M400) with the power supply to the reader off by default. Moreover, any idea where I can find the extra battery for the slot of the CD/DVD player and who the price?

  Thanks in advance for your help.

  Hello, Robert

  If you see the start page, you will see that this support forum is not a type of support Toshiba directly but forum users. But you're not alone and many users expect that a Toshiba support team sit in the office and before writing the answers.

  In any case, there are many users of Toshiba laptops with very good knowledge and also amateurs who are trying to help the other guys in different problems and also to share own experience.

  Professionalism is not the forum but action when you need help because of physical damage or something similar. If you need assistance and competent answers each authorized partner must be able to provide the info you need. But please don t mixture and Toshiba service partner because it is not the same.

  In any case, I found the info you can use additional (second battery expansion) and it takes batteries with PA3510U-1BAL, PA3510U-1BRL room numbers. I can't tell you how much it costs, but you will find only using Google.

  Back to your first question: if I understand you just want to save more power and because of this, you want to sign out ODD. It's a nice idea, but you have clearly misunderstood something. "Safely Remove Hardware option is there to help the operating system and and say this material, a part will be removed and don t exist anymore, but it does not physically the disconnection of any other material."

  If you need more power use a second battery and enjoy your life.

  If you have any other questions you are welcome. A lot of users here M400 and I hope in the future that some of them will participate in a little more.

  Good day! :)