The State of Transition (VM_STATE_ON-> VM_STATE_CREATE_SNAPSHOT) not allowed for this virtual machine

Similar Questions

• With the help of VM Workstation 8. error when restoring from instant snapshots are not allowed on this virtual machine.

  Hello

  I have takena instant and then try to turn on the machine and get a message:
  "Snapshots are not allowed on this virtual machine!

  When I try to start the snapshot form, I get an error:
  "snapshot restore error, snapshots are not allowed on this virtual machine.

  Can you please help?

  It seems that the configuration (.vmx) file has been deleted (zero byte). I recreated a new you have attached log files. Please replace the file corrupted with VMware Workstation (or at least tab of the virtual machine) closed in order to ensure that the replaced file gets read.

  André

• Why the NDP module says "you are not allowed for this operation?"

  Hello world

  I hope you can help me with this problem!

  I'm playing with the NDP module has a message saying 'you are not allowed for this operation.

  This happens when I try to create a new project and try to open the window to select a project type. It also happens when I go to the ADMIN and add new types of projects?

  Is there a role limiting me or does some other underlying problem?

  Thank you in advance.

  Hello

  I think that you might miss an active project type category.

  Go to Admin-> NDP-> categories of project types.

  You must have at least one category that is active (which is indicated by a green check mark).

  Once at least one is activated, you will need to go to the Cache and rinse the taxonomy of cache (just to be sure, I would empty Admin Data Cache Group as well).

  Then you can go to the Admin and configure your project types.

  Let me know if you have any questions,

  Dmitriy

• You cannot connect because the logon method, you use is not allowed on this computer. Please, see your network administrator for more information.

  Whenever I enter my correct password in my windows account it rejects a message and it comes up saying: "you cannot connect because the logon method, you use is not allowed on this computer." See your network administrator for more information. "I can't seem to be able to enable or disable anything because the profile I'm using on my computer is the profile of"Guest ".

  Karima,

  Applicable to Windows 7.

  The following steps require administrator credentials.

  • Use the Windows + R or "Run" in the start menu, then type gpedit.msc.
  • Navigate to Computer Configuration > Windows settings > local policies > user rights assignment > consider all policies "prohibit the newspaper on" to check if your guest account is listed. Remove account from the list, and you should be fine to continue using your guest profile.

  Good luck.

  James

• can not connect because the logon method, you use is not allowed on this computer.

  I have a new computer that is joined to the domain, but in trying to have a user login, I get the following error:

  can not connect because the logon method, you use is not allowed on this computer.

  The only way for him to connect is to change its parameters from the user to the administrator. I tried power users and other options and did not work.

  is there any solution for this?

  Hi Snidera,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  It will be useful.

• Windows Mail error 0x800CCC92: Operation of Pop is not allowed for this user

  Split of: ' "windows mail error code: ox800CCC0E, error code 10060".

  Account: 'mail.bigpond', server: 'mail.bigpond.com', Protocol: POP3, server response: '-ERR pop operation is not allowed for this user.', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92

  It's what keeps appearing on my Windows Mail when I go in there. BigPond say they have problems with Windows Mail and try to fix it.  Any ideas please?

  Thanks LyndaBeresford

  If they have problems, then it is not that you can do about it until they solve these problems.

  You can access your e-mail via webmail: https://signon.bigpond.com/login?site=chw&goto=http%3A%2F%2Fmessaging.bigpond.com%3A80%2F%3Fref%3DNet-Head-Webmail

  Steve

• Change tracking (CTK) block is supported for this virtual machine, but was refused. This will increase the CPU proxy and consumption of IOP.

  I have problems with a client of VMware image-level in an EMC Avamar backup.  So far, we have not been able to find information about this message in the backup log file.  It is originally the backup to take a very long period of time (on average 10-11 hours).

  2014-02-28 14:20:57 avvcbimage < 14681 > Info: change tracking (CTK) block is supported for this virtual machine, but was refused. This will increase the CPU proxy and consumption of IOP.

  We cannot determine why CBT is "denied".  Has anyone here run across this issue before or seen any other type of backup VMware image have denied CBT?

  Everything I checked watch that CBT is successfully activated since the file vmx for the customer to the Avamar config.

  ESXi host is Enterprise Plus 4.1.0 260247

  After spending some time on this issue, the ultimate resolution withdrew the Avamar vm and then add it again.  After that, CBT began to work properly.  It seems that there is a parameter that has been 'stuck' pertaining to this virtual machine that wasn't behaving properly.

• The area is blocked: * siteremoved * is not allowed on this network.

  I go to a site that I go to every day and all of a sudden, I'm being re-directed to http://block.opendns.com/main, and the page reads:

  THIS DOMAIN IS BLOCKED.
  Www.xxxxxx.com site is blocked is not allowed on this network. OpenDNS

  I checked my router settings and nothing is blocked. I checked this first because I recently opened Upnp to allow a game.

  I do not use a DNS service and I can't understand how to 'allow' this site on my network.

  Can someone tell me where to click to allow a site on my network?

  original title: THIS FIELD IS BLOCKED.__Site blocked www.xxxxxx.com is not allowed on this network. OpenDNS

  192.168.1.1 is the local address of your modem or router.  In turn, your router or modem gets its information from your ISP DNS, unless ignore you it with a manual setting.

   

  I have a Vista computer handy, but on my computer Windows 7 I would right-click on the connection in the task bar icon, select "Open network and sharing Center." Then click "edit card settings. Right-click on the adapter used (without wireless or LAN), select Properties, then 'Protocol Internet Version 4 (TCP/IPv4)', then properties. Instead of "Obtain DNS server address automatically" click "use the following DNS server address". Enter 8.8.8.8 and 8.8.4.4 in two spaces, click OK and restart. Did that fix the problem?

  Gary van, Microsoft MVP (Mail)
  ------------------------------------------------------

  "LanCyfer" wrote in the new message: * e-mail address is removed from the privacy... *

  ... DNS server: 192.168.1.1

  "LanCyfer" wrote in the new message: * e-mail address is removed from the privacy... *

  where should I click to check the settings of the DNS on my PC?

  Vista

  Gary van, Microsoft MVP (Mail)

• "your security settings do not allow for this file to download" - AGAIN!

  Hello

  I can't download apps and programs. I received a lot of help on the forum, but nothing helped. More recently, I went to https://support.microsoft.com/en-us/kb/929135 and follow the instructions. Nice instructions. Had no effect. Also made sure anti-viral and firewall is absent.

  Examples of what I tried to download is 'amazon games and software downloader' and 'Amazon kindle app for pc.

  I am running windows 7 starter edition.

  There is something fundamentally wrong with my Windows. Yes?

  If you think you have a fix for this, you can come back. It's my Windows community sixth or eighth in this test.

  Al

  To solve your problem, follow these steps:

  Note: Download only the files and programs on trusted sites. Downloading files at risk since it can contain malware and viruses that can damage the system. Change the security settings for download at your own risk. Make sure you have an Antivirus running on the bottom before downloading programs.

  (Make sure to close any browser you use before performing the steps)

  1. click on Start > Control Panel

  2. click on network and Internet > Internet Options

  3. click on the Security tab, click custom level... button (see image below).

  

  4. now scroll down to the download section and under file download, choose Activate.

  An update on the results.

• Need to set the URI of workflow? -Information not available for this task.

  Hello
  
  I know why my task flows are not appearing in the BPM workspace, but I'm not sure what to set the URI to in order to get them to load. I am aware of the context, but what are the other settings does in order to find success?
  
  I automatically generated tasks and they used to work, but in a whirlwind of deployments, they seemed to have disappeared.
  
  Thank you

  Simplest would be to redeploy the single task form.

  Right click on the Application in the browser of the application of JDev and deploy the ear.

  If you want to manually change the URI, then try this
  Open the hwtaskflow.xml file in $APP_HOME /classes / folder.

  You can find the name of the application, workflow id and the name of the xml file.

  Using these info appearing similar to this URI.

  /Workflow//faces/adf.task-flow?_id=& _document =

  For example:
  / Workflow, WebCenterWorklistDetail, faces, ADF. Task-Flow? _id = FYIApproved_TaskFlow & _Document = FYIApproved_TaskFlow.Xml

  I hope this helps!

• FT-record/replay feature is not supported by this virtual machine Windows Server 2012

  Recently I came across a bug when I created a virtual machine with the latest versions of 5.1.0 - ESXi 838463, Client ver 5.1.0 - 860230, vCenter ver 5.1.0 - 880146.  If you create a virtual machine on a Server Windows 2012 farm for some reason any recording/playback is disabled and you cannot implement fault tolerance mode.  I found a good solution.  You delete the virtual machine to inventory, and then re-create the virtual machine as a Windows 2008 R2 server and use the virtual machine that you deleted from the original disc of the inventory rather than create a new one.  Then turn on FT.  Then, go into the settings and change the operating system to Windows Server 2012.   Fixed a problem.  If all goes well they will fix this soon.

  Jimmy S.

  Default adapter for windows 2012 is E1000E, which is not supported for RecordReplay FT.  If this is the case can you please try with another network card and see if it helps.

  If this is not the case, can you please upload vm-support bundle or file a support ticket.

  Thank you

  Pradeep

• Problem with "TCP/IP not enable for this connection. Cannot move forward. "

  I am struggling with his wireless Dell Wireless 1450 USB Adapter. In the XP Device Manager, it seems to work very well. But no wireless connection is made with my upstair wireless router, that it is bound to for more than 2 years. When I tried to repair the connection, the following screen message appeared:
  "windows could not finish repairing the problem because it is impossible to perform the following action:
  TCP/IP does not allow for this connection. Cannot continue. »

  I tried uninstalled, then installed again.  But nothing improved...
  What should I do?

  
  

• Log on to the method not allowed on this computer

  original title: Error Window Vista.

  You cannot connect because the logon method, you use is not allowed on this computer. Please, see your network administrator for more information. This is the response I get when I try to log on my Windows Vista computer on a domain. I removed all the newspapers deny on policies affecting the comments. Always the same. Can anyone help.

  Hello

  I suggest you to ask your question at the following link.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/

  I would also ask you to contact your IT Department.

• Country does not allow for electronic signatures

  I'm looking for more information about how to manage the agreements in countries that do not allow for electronic signatures.  How they are followed when you want to have printed, signed and mailed in.

  Hello

  The short answer is that the customer or the signatory must print and sign the document, and then either scan / email / fax to the sender; Download the sender and then to the document to save in EchoSign.

  In most counties, while electronic signatures are up to debate the legalities, scanned, or copies of documents by fax can be authenticated are accepted everywhere.

  Thank you

• WAIT % - % IDLE, what is the average for a virtual machine?

  I did some research on performance of VM problems and worked with the media to see that there is maybe a bottle neck IO that occur with a virtual VMware machine I have performance problems on. The technician found that the WAITING % - % IDLE on average for this virtual machine is around 200%. The tech said it was abnormally high. I forgot to ask her what was normal but wanted to put a post to see if some people out there know what they are on average. What is an average number of see? I have the system done nothing right now and I see 579% waiting and 372% IDLE. The technology has been able to confirm that no IO queue was occurring in the VMkernel or on the HBA controller.

  Some average % positions would be useful. Thank you.

  gdewulf18480 wrote:

  Supposibly the amount of time in a State of waiting for I/O is the WAIT - IDLE % difference. I was wondering if anyone had the numbers for this feeling. Is there anyone with some of them?

  Q: How will I know the VCPU world waiting for I/O events?

  A: WAIT - % IDLE % can give you an estimate on how much time processor is spent waiting for I/O events. It is an estimate only, because the world wait perhaps for other than the i/o resources. Note that we should do it only for the worlds of the WWW, not the other kind of worlds. Because the VMM worlds represent the best guest behavior. For the disk i/o, another alternative is to read the disk latency stats that we explain in the drive section.

  WAIT % by itself cannot be used, you must develop and examine the individual vCPU % EXPECTATION values and subtract their idle time.  You can't do it on the initial view of a single line by VM CPU in esxtop.  If technology that you mentioned did not explain it, he doesn't know what it takes.

  I have lots of virtual machines that are never less than 300% when I wait - % idle and I have no problems.

  It is an example, I caught NimSoft server:

  DHSNMS1 100 100 5 192.63 193,80 0.24 0.03 291,44 1.04

  %EST USED (s) 192 - in other words, almost two processors are used 100%

  The %Idle is 1.04% WAIT 291.44 - according to the calculation of waiting idle, I have a super serious problems of e/s past  But this isn't the case, and expanding, I can see that.

  5665 vmware-vmx 100 1 0.09 0.11 100.00 0.00 0.00 0.01

  5667 100 vmassistant.566 1 0.62 0.65 99,63 0.00 0.00 0.00

  5703 100 mks:DHSNMS1 1 0.01 0.01-100.00 0.00 0.00 0.00

  5704 vcpu 100 - 0:DHSNMS1 1 32,35 32.88 67,28 0.28 0.11 67,14

  5705 vcpu 100 - 1:DHSNMS1 1 31,58 32.05 68.11 0.00 67.85 0.12

  So the changed values unfortunately because of ESXTOP bike when you develop... which is annoying, but anyway.  In this you see % waiting is 67 and 68 with another respectively being 3 to 100% (which is normal) and the idle being %, 0, 0, 0, 67 and 67.8.  Doing the calculation on the processors shows a wait - slowed virtually 0 - or very little IO wait past with processors.  But if you add up all the expectations of % and % is idling, you have 434ish, and the 134ish and do the calculation is the difference of 300 - which is the 3 who are always 100%.

  So there is no way we can answer your question, we can only help you to understand how the values should be interpreted.

  Waiting for i/o States almost always go on the disc anyway, it is unlikely, therefore, the network or the user entered, looking at the stats of disc ESXTOP is a much better way to determine if there is a problem of e/s.