With the help of VM Workstation 8. error when restoring from instant snapshots are not allowed on this virtual machine.

Similar Questions

• The State of Transition (VM_STATE_ON-> VM_STATE_CREATE_SNAPSHOT) not allowed for this virtual machine

  Can't figure this one out and search Google is not come with much.

  I have 13 virtual machines in my environment.  They all use the same data store.  11 of them have no problems, but 2 of them fail with this error when you try to make a snapshot.

  I tried to reboot the hypervisor and vmware vsphere services.  I tried to remove and add the virtual machines of the inventory.  None of the VMs directories have snapshot of the files already.

  This usually means that you have material non-quiescable, as a tape device connected, or you have a persistence of defined virtual disk.  I recomment you latter by default and try again, because this is the typical cause.  Otherwise, other suspects are raw disk mappings (a fibre channel LUN) sent directly to your virtual machine, which cannot be suspended or IO DirectPath devices (USB or PCI cards series you will cross TSE of the VM).  If this is the case, you're probably SOL.

  I strongly suspect that you're a mode not supported on the persistence on a virtual disk to your virtual machine.

• Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to fix this ti net pr

  Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to solve this problem, the next time he throws."  Except that it isn't, I get the same message and the program closes.  Anyone know what I can do to fix it?  Can not backup, can't do anything.

  There are dozens of discussions in this forum that describe the fix

• Why the NDP module says "you are not allowed for this operation?"

  Hello world

  I hope you can help me with this problem!

  I'm playing with the NDP module has a message saying 'you are not allowed for this operation.

  This happens when I try to create a new project and try to open the window to select a project type. It also happens when I go to the ADMIN and add new types of projects?

  Is there a role limiting me or does some other underlying problem?

  Thank you in advance.

  Hello

  I think that you might miss an active project type category.

  Go to Admin-> NDP-> categories of project types.

  You must have at least one category that is active (which is indicated by a green check mark).

  Once at least one is activated, you will need to go to the Cache and rinse the taxonomy of cache (just to be sure, I would empty Admin Data Cache Group as well).

  Then you can go to the Admin and configure your project types.

  Let me know if you have any questions,

  Dmitriy

• With the help of Creative cloud on a desktop computer in a rural area without Internet access

  I have a subscription to creative cloud for my home office. I soon will participate in a photography workshop in a rural area with NO INTERNET ACCESS. I don't own a laptop and you carry my office instead, we remain. I know that the software is installed on the machine and I should be fine with its use without online access, rectification? I'm also right in thinking it will "not be considered" as being used on a second computer, because while I use it on this trip I won't have access to the Internet and so no IP address?

  Hello

  The only thing that could cause problem, is if your workshop is more than a month long. While using applications downloaded from creative cloud, internet access is necessary once a month for a routine license check. Here are some creative cloud FAQ:

  http://www.Adobe.com/products/creativecloud/FAQ.html

  Do I need a continuous Internet access to use my Creative Suite apps?

  Because your Creative Suite applications are installed directly on your computer, you will not have a continuous Internet connection to use on a daily basis. However, you need to be online when you install and license your software and at least once every 30 days thereafter. The software warns you when you connect to the Internet for a license status check.

  Note: If the product can not check your permit at the 30-day mark, a 7 days period. However, if you are not able to access the internet within 7 days, your applications will be blocked (Soucre: http://forums.adobe.com/message/4513667#4513667)

  As for your second question - as long as you use the same device that you already have your applications installed, you have always only a single device registered to your account.

  If you have any other questions, feel free to post here again.

  See you soon!

• With the help of CONSUME_CLICK called fieldChanged automatically when setFocus() is called in ButtonField

  Hi all.

  I posted this question before in http://supportforums.blackberry.com/t5/Java-Development/how-to-prevent-occurrence-menu-when-click-a-... but as a thread how on an issue different from the original. Given this is not connected somehow and a problem in itself, I decided to start a new thread. Forgive me if I'm wrong. I'll appreciate a response in one of the two sons

  I have a button that poped a menu when you click on it and going through the forums I found the solution of CONSUME_CLICK style. In fact, the menu popup more but it gave me an undesirable side effect

  Now, it happens that when I put the focus programmatically withbutton.setFocus (, the tracks of methodFieldChangeListener.fieldChange automatically producing unexpected click

  I tried to read the context value, but it is always zero

  How to avoid the popup menu AND the automatic one click when button.setFocus () is called

  I've seen this behavior in my Curve 8520 with v.5.0.0.1036. Simulators v.6.0 as 9300 and 9800 running don't behave this way. They do not have the auto click

  What happens if you just remove the earpiece of change of field (by calling setChangeListener (null)) before you call setFocus() and place it back after that called setFocus?

• Receive error message "you are not allowed to this directory or this page" using the identification information you have provided to the struggle. when upgrading to SP3.

  403-Forbidden: access denied

  While trying to upgrade to XP SP2, SP3, a server error message appeared as the title with the text "you not may to this directory or page using the credentials you provided for the fight."

  ????

  Hi ZRay,

  1. You use Windows update or manual download to install service pack 3 on the computer?
  2. During the process of upgrading to how you receive the error message?
  3. You have security software installed on the computer?

  I suggest you check out the article below and try the steps mentioned, check if it helps.

  When you try to install Windows XP Service Pack, you receive the error message "Access denied" or "installing the Service Pack has not completed"

  http://support.Microsoft.com/kb/949377

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• With the help of VMware workstation 7 on Win 7 laptop

  Hi all

  Out of curiosity, someone at - it never try to install VMware workstation on Windows 7 with 4 GB of RAM (Intel® Core™ i5 - 520 M processor (3 m Cache, 2.40 GHz)

  I intend to run SharePoint server 2010 beta on this laptop for a demo and I was wondering if it is recommended or not?

  Thank you.

  Kind regards

  AWT

  I run WS 6.5 on a laptop of recent Dell game (1 year) with 4 GB of RAM with Windows 7 64-bit. In fact, I have 4 ESX and Vcenter that run in WS 6.5 for education. You need a 64-bit version of Windows to use 3 GB or more due to limitations of 32-bit Windows.

• With the help of a USB FlashDrive on brother's computer - file permissions are different

  Hi all

  I have a small set of files on a USB key that I brought with me during a family visit.  So, I used time (Toshiba) of my brother and my sister-in-law (Vaio) computers.  I saved a few things about the USB when I arrived (using Vaio) and everything worked as usual.  When I started to use the Toshiba, all the files on the flash drive were not available.  It's as if the permissions have been changed.

  I tried to make changes through sharing, changed the permissions for the folder of level higher - and made sure that the subfolders and files have been included, unchecked the 'read only' box for this folder.  Nothing seems to work, at least not completely.

  Many files will be accessible, but some are still "locked".  It doesn't seem to be any model to which are which.

  Does anyone have an idea what could be wrong?  If nothing is 'bad', how can I change it to my flash drive works in any computer as if it were before?

  Thank you!

  You must enter possession records level superior while on the machine your brother, then grant full access to "everyone".

• WITH THE HELP OF SEPARATE OR ONE GROUP WHEN IN PRIMARY KEY CLAUSE

  I WANT A WAY TO EFFECTIVELY PERFORM AGGREGATE FUNCTIONS ON A PARTNER OF THE PARENT TABLE CHILD TABLE AND RETURN ALL THE COLUMNS IN THE PARENT TABLE AND CALCULATED FROM THE CHILD TABLE COLUMNS.
  
  THE PROBLEM IS THAT WHEN I USE GROUP BY ON ALL FIELDS IN THE PARENT, INCLUDING THE PARENT TABLE TABLE, I THINK THAT ORACLE TESTS ALL THE COLUMNS IN THE GROUP BY CLAUSE WHEN IT SHOULD GO HAS THE PRIMARY KEY MAKES ALL IMPLICITLY SEPARATE LINES.
  
  I CREATED TWO TEST TABLES AND RRAN SOME QUERIES TO TEST AT THE SAME TIME.
  
  HERE ARE THE TABLES:
  
  CREATE TABLE A_PARENT_TABLES
  (ACTIVATE THE NUMBER PT_PARENT_TABLE_ID (20.0) NOT NULL,)
  PT_GRP_FEILD1 NUMBER (20.0) NOT NULL ACTIVATE.
  PT_GRP_FEILD2 NUMBER (20.0) NOT NULL ACTIVATE.
  PT_GRP_FEILD3 NUMBER (20.0) NOT NULL ACTIVATE.
  PT_GRP_FEILD4 NUMBER (20.0) NOT NULL ACTIVATE.
  PT_GRP_FEILD5 NUMBER (20.0) NOT NULL ACTIVATE.
  PT_GRP_FEILD6 NUMBER (20.0) NOT NULL ACTIVATE.
  PT_GRP_FEILD7 NUMBER (20.0) NOT NULL ACTIVATE.
  PT_GRP_FEILD8 NUMBER (20.0) NOT NULL ACTIVATE.
  PT_GRP_FEILD9 NUMBER (20.0) NOT NULL ACTIVATE.
  ENABLE CONSTRAINT A_PARENT_TABLES_PK PRIMARY KEY (PT_PARENT_TABLE_ID)
  );
  
  CREATE TABLE A_CHILD_TABLES
  (ACTIVATE THE NUMBER CT_CHILD_TABLE_ID (20.0) NOT NULL,)
  CT_PARENT_TABLE NUMBER (20.0) NOT NULL ACTIVATE.
  CT_VALUE_TO_SUM NUMBER (20.0) NOT NULL ACTIVATE.
  ACTIVATE THE CONSTRAINT A_CHILD_TABLES_PK PRIMARY KEY (CT_CHILD_TABLE_ID)
  CONSTRAINT CT_PARENT_TABLE_FK FOREIGN KEY (CT_PARENT_TABLE)
  REFERENCES A_PARENT_TABLES (PT_PARENT_TABLE_ID) ON DELETE CASCADE ALLOW
  );
  
  
  I HAVE INSERTED THEN 20,000 RECORDS IN THE A_PARENT_TABLES TABLE AND 60,000 IN A_CHILD_TABLES (3 FOR EACH PARENT)
  I THEN RAN THE FOLLOWING QUERY:
  
  
  -ALL FIELDS GROUGPED
  SELECT
  PT_PARENT_TABLE_ID,
  PT_GRP_FEILD1,
  PT_GRP_FEILD2,
  PT_GRP_FEILD3,
  PT_GRP_FEILD4,
  PT_GRP_FEILD5,
  PT_GRP_FEILD6,
  PT_GRP_FEILD7,
  PT_GRP_FEILD8,
  PT_GRP_FEILD9,
  SUM (CT_VALUE_TO_SUM) AS SUMED_VALUES
  Of
  A_PARENT_TABLES,
  A_CHILD_TABLES
  WHERE
  PT_PARENT_TABLE_ID = CT_PARENT_TABLE;
  
  GROUP BY
  PT_PARENT_TABLE_ID,
  PT_GRP_FEILD1,
  PT_GRP_FEILD2,
  PT_GRP_FEILD3,
  PT_GRP_FEILD4,
  PT_GRP_FEILD5,
  PT_GRP_FEILD6,
  PT_GRP_FEILD7,
  PT_GRP_FEILD8,
  PT_GRP_FEILD9;
  
  
  At TOOK 2.42 seconds set IN ŒUVRE
  
  
  
  -ONLY GROUPED FIELDS
  SELECT
  PT_PARENT_TABLE_ID,
  SUM (CT_VALUE_TO_SUM) AS SUMED_VALUES
  Of
  A_PARENT_TABLES,
  A_CHILD_TABLES
  WHERE
  PT_PARENT_TABLE_ID = CT_PARENT_TABLE
  GROUP BY
  PT_PARENT_TABLE_ID;
  
  
  At TOOK 0.71 seconds set IN ŒUVRE
  
  
  WHY DOESN'T THE FIRST QUERY ARE REALIZING THAT HAVING PT_PARENT_TABLE_ID (PRIMARY KEY) IN THE GROUP BY CLAUSE MEANS THAT NO OTHER COLUMNS SHOULD BE CHECKED?
  
  HOW CAN I ACHIEVE THE EQUVILENT OF THE FIRST QUERY IN A WAY MORE EFFECTIVE?

  Hello

  As you can see on the plain explain command
  This full table scan done query1 on A_PARENT_TABLES
  query2 done index range scan on A_PARENT_TABLES

  This is one of the reasons why query2 runs faster than the application 1.

  Why complete analysis of table to query1?
  Its because you want in query1 to display other fields present in A_PARENT_TABLES and is not present in the primary index of this table, that is why he must go to the table for the data.

  Hope this helps.
  Concerning
  Anurag Tibrewal.

• Problem with the help of PS on Surface 3 when I attach a HDMI monitor

  PS works fine on my 3 surface. When I attach a HDMI monitor and drag the window of PS to him changes in scale and menus, panels etc. become huge as if I use a monitor very low resolution. Tried to change Windows settings for the size of the characters, but no difference. In this way, it is unusable

  Your surface 3 pro has a 12 "screen that displays 2160 x 1440 pixels and resolution from 216 DPI.  What is your HDMI monitor and pixel how does view it is more likely is a low resolution screen. And if you use CC 2014 2 x UI the image on the screen of Surface 3 pro is used as it has a 108 DPI, image resolution is like its on a screen is 1080x720PX Photoshop double pixel size her two times wider and twice as high.  4 native pixels of Surface 3 pro serve that would be as true on your HDMI display if it has a resolution of 100 dpi, it would be use as it has a resolution of 50DPI.  The image would look huge and and the display would only display 1/4 the amount of information it could display.  Do not use 2xUI...------using Photoshop CC 2014 on a tablet of Windows without a keyboard and a mouse

• Lightroom showing constantly "unresponsive" and very slow since the last update. With the help of Windows 10. Extremely slow import!

  Lightroom showing constantly "unresponsive" and very slow since the last update. With the help of Windows 10. Extremely slow import!

  Hi Dear

  Please see this thread windows Lightroom CC 10 'unresponsive' number.

  Let us know if this helps

  ~ Assani

• With the help of Correct/Incorrect legends & branch?

  Hello

  I'm still new to Captivate, and here's what I'm trying to do.

  I use formative, individual issues in a branching scenario, rather than the graduate issues. When a student sends an incorrect answer, I want to say: "actually, the correct answer is x" or, "Yes." And include "comments on the page. A fine; I know how to do this.

  And I want to the branch. So, after seeing the appropriate legend, clicking on always takes the user to page B if their answer was incorrect, but page C so their answer was correct.

  I can understand how to make the connection or legends, but not both. The only way I tell myself to do anything is to not use the legends but just branch based on the submission of the student and take students to a pre - A or pre - B page that includes all the content of the question slide (except that I can't use the buttons 'radio'), to meticulously recreated, feedback and the text of the legend. Then the user could continue to Page A and Page B. This seems so much more work than if necessary.

  Suggestions, then welcome! Thank you.

  Hello

  You want to have two actions in the order show a legend and then move to another slide. The problem is that indeed, you can trigger a fast action on the success or failure, but as the user needs time to read the caption, you can't put the two actions (see the good TC and jump to another slide) in the same tip action. What is the proper interpretation of your question?

  Problem is that you are not allowed to put an interactive object on a slide of ordinary matter, so you cannot add a button or click box to a Question slide. This means that all actions in the tip action will be executed at the same time, there is no time for the user to watch the legend of success or failure.

  There are different possibilities, but I think it's the most simple:

  1. Create a 'Success' slide with the "legend of success" and put a button to click/box on it to blow it up to the place, when the user has read the legend
  2. Create another slide "Failure" with the "legend of failure" and put a button to click/box on it to jump to the location B, when the user has read the legend
  3. Attach action 'skip to slide the success' success and action 'jump to slide failure"for the failure of the Question slide.

  What do you think?

  Lilybiri

• TB 31.0 when you reply or forward, will not allow the names in TO:

  With the help of TB 31.0. When I hit the reply, no name is inserted in the TO: and does not have a name to register. When you use before, does not allow a name to be included in the TO:

  Problem started after the installation of 31.0 TB.

  Start in safe mode (hold SHIFT (Mac: Option) when you start TB) and see if the problem persists. You have the add-on Photo touch?

• Error 100 with the help of DOWNLOAD adobe...

  Error 100 with the help of DOWNLOAD adobe... Unable to connect using the software adobe acrobat... I'm not having problems of network...

  HI celine

  Please visit: http://forums.adobe.com/message/5970223