the steps in the sequence display

Similar Questions

• Length of the sequence in hearing CC

  When I send a sequence of CC of the Organization, the extent of the sequence displayed in the sequence reflects the greater length of the sequence in the body at any time during the installation. For example: at one point the movie is 60 minutes long, but I cut down for 5 minutes, photo locked and now I have "Edit in Audition." The timeline in hearing is now 60 minutes long, with a small patch of bitty 5-minute clips on the left.

  Is it possible to do the Audition to cut out the empty space at the end? As the end of the sequence of setting the force?

  The fastest method of "reset" of the notice of hearing would be to click on the button 'Zoom Out full both Axes', located at the upper right of the Editor window:

  

• Display dialog popup to step to the sequence type

  I have a type of step in LabVIEW with module parameters and variables of the step which must be installed to configure this step. Can I do to display the dialog box pop-up to enter the required values for the time when I drop the step to a new sequence type?

  Examples: 1. I have variable TestID of steps which must be installed. Pop-up dialog box is more convenient that is variable and by searching the TestID in the tree.

  2. I have one type of step that makes different actions depending on the parameter enum in the LabVIEW module. This is set by default in steptype. I would like the name of the step in my sequence to match the value of the enumeration. Something like RunState.Step.TS.SData.ViCall.Parms ["Update Configuration"]. ArgVal in step step Expression name by default type help and displays the text of the enum as a stage name, when I drop the type of step of the sequence. But change the Configuration parameter update during this step to another value is not followed by changing the name of the step, looks like step default step name the type Expression is evaluated once what stage is created from the step type.

  Yes, you can add code to your step type that is called whenever an instance of it is inserted into a sequence. Create a customized type of step step and name it OnNewStep. TestStand will then call this substep whenever a new instance of the step type is inserted into a sequence.

  The default expression is evaluated only when the step is inserted, that is correct. I don't know in a way that you could make the name of the step automatically updated based on the value of the parameter of the module planned for it. You could write some kind of tool that updates the names of these steps in a sequence and run that, periodically, but I don't think there's a way to have your code directly from a user action to specify a code module. You can create your own user interface to specify things on the steps by using a publishing step and this edit substep could update the name, but I'm not sure this is a practical solution for your particular use case.

  Hope this helps,

  -Doug

• documentation for the sequence file report does not display the parameters of the step

  The parameters of the step is missing in this report. Is it possible to add this just as you have included the sequence settings. Thank you.

  Sequence: MainSequence
  Type: Normal
  Disable the results for all stages: false
  Goto cleanup in case of failure: use the Station Option
  Number of installation steps: 2
  Number of steps: 10
  Number of steps of cleaning: 2
  Parameters:
  PartNumber String (by reference)

  -Stage: Installation Instruction
  StepType, adapter: Message Popup. 
  Description: NameOf (Step)
  Module loading and unloading Options: preload the beginning of execution, discharge the closure of movie file
  Record results: disabled
  Flow properties: Post Action:
  If)
  GoTo
  Record result: disabled

  I agree that it's frustrating.  I had the same problem recently.

  You should post it in the forums of idea: http://forums.ni.com/t5/NI-TestStand-Idea-Exchange/idb-p/teststandideas

  Or you can change the sequence that generates these and include parameters.  The source so that it is in: \Components\Tools\DocGen

  Hope this helps,

• Parameters specified by step do not match the settings of the sequence

  I just upgraded from Teststand 4.1.1 to 4.2 and have encountered this

  problem during the review of the existing sequence files.

  When I open a file of sequence, select any stage of type sequence call, which calls another sous-séquence

  in a different sequence file, I learned that the parameters used do not correspond to those required.

  To be more precise, in the settings area of the stage, a red exclamation symbol appears at the side of the

  subsequence called step, and the ToolTip is displayed when the mouse pointer is

  hovered over the exclamation point States:

  "Parameters specified by the step do not match the settings of the sequence."

  The ToolTip goes on to explain how to solve this problem by clicking on the exclamation symbol.

  I find also that by deselecting the "Prototype using sequence" tab in step Settings\Module

  solves the problem.

  When the sequence is executed, no problems occur with execution, the test performs correctly.

  Is it possible to clear this error for each sequence call not in one operation?

  Thank you

  Gary.

  My apologies to attach a file of sequence buggy. I forgot to pass a parameter to the LoadPrototype method to preserve existing settings. I have attached a corrected version of the sequence file. I changed to update SequenceCall not only because of potential problems, reloading the DLL prototypes.

  I would try to explain why you see cela TestStand 4.2. The additional results feature, we added to TestStand 4.1 needs to know what parameters are entered, output and input/output (i.e. what settings is pass by reference). Before TestStand 4.1, step of calling sequence does not store this information but rather dynamically got it and it appears in the column how go. Now that we store the past by reference with the step option, you can have an inconsistency between the option stored in step and the current setting of the sequence called. This inconsistency affects only additional results and not execution. TestStand 4.1, the sequence editor to not warn you on these inconsistencies. We have added the TestStand 4.2 warning so that you will have the correct information for additional results.

  When TestStand 4.1 or 4.2 load a file of sequence from a pre-version 4.1 version, TestStand sets cervical optionally reference true for all parameters in the call sequence steps. This is why you see the warning for any sequence calling step created TestStand 3.5 If no parameters are not passing by reference. You can also see the problem if you change the option collar called a reference parameter in the sequence.

• is it safe to use a view control of sequence to display the sequence file both for execution

  I have a Teststand UI written in Labview 2012.  It has a single control of sequence, and I use the ConnectSequenceView method to switch between the display just the loading sequence file and the running.  Allow me to reiterate.  When a file sequence is running, the control is connected to the execution Manager.  Otherwise, it is connected to sequenceFileView Manager.

  I begin to suspect that I have questions related to this control, when I do the following.

  1. load a movie file

  2 run Single Pass

  3. the execution ends

  4. unloading and Release sequence file

  5 load a different sequence file

  6. run single-pass

  7 Labview crashes

  Am I missing a step?

  Thank you

  Kevin

  So it seems the crash of Labview, I mentioned in the original post is unrelated to the joint use of display of the sequence control.  However during my troubleshooting, I noticed that I was missing cut from a point of view of control stage before connecting the other view.

  And for the record, I think that there are many things wrong with the architecture used in the complete example, but there also many too many features for what to.  Just need a simple "press a button" and "run a test" for operators.  Everyone uses the sequence editor.

  All right.  Thanks for the comments.

  Kevin

• can see us line numbers next to each step in the sequence file?

  Hello

  I have a file of sequence having 600 steps. I would like to know is there any option to the test to set number for each step in the sequence of line editor so that it is useful for the review.

  Example:

  1 Action1

  2 Action2

  ............

  600 Action600

  Kind regards

  Krishna

  Krishna,

  If you want just to know the index of a step, this information is displayed at the bottom of the sequence editor in the status bar.  It shows you how many steps there are in the sequence, how you have selected and the index of the selected steps.

  

  It is also possible to display the information in the view of the steps in a column, if you are ready to create a new column.  Follow the instructions in this KB to see how to create a new column:changing the properties of columns in the viewport of execution TestStand sequence editor.

  One of the types of columns is Index. Just set your column of this type and you'll see step index as shown below.

  

  

• By program the Sequence value call step

  I have code (LV 2015) that weights a step in a sequence of TS (TS 2014), changing the sous-séquence judicially.

  The code works, but an error is thrown (which indicates the resources have not been released), and ultimately, LabVIEW crashes.  Strangely, the resources that it ' complain is that I have not consulted.

  Here, we the offending code:

  It is the conversion of the reference Module to a SequenceCallModule which seems to be the cause of the trouble.

  Here is the dialog box that appears:

  

  Here we the full text of the error:

  References to PropertyObjects not released correctly.
  Total number of objects: 1024
  Number of objects at a higher level: 17

  Note: Some higher level objects can be included if they are referenced by
  an incorrectly released top-level object. For example, a new
  SequenceContext object is a reference to a SequenceFile object.

  The following top-level objects are not set:

  Definitions of types [5 or objects not published]
  Definition of type #1:
  Name: SeqCallStepAdditions

  Definition of type #2:
  Name: SequenceArgument

  Definition of type #3:
  Name: NI_SequenceParameterResult

  Definition of type #4:
  Name: Expression

  Definition of type #5:
  Name: path

  And the following unclassified objects:
  SequenceCallModule (SeqCallStepAdditions)
  Name: surlabasedesdonneesdufabricantduballast

  SequenceCallModule (SeqCallStepAdditions)
  Name: surlabasedesdonneesdufabricantduballast

  SequenceCallModule (SeqCallStepAdditions)
  Name: surlabasedesdonneesdufabricantduballast

  SequenceCallModule (SeqCallStepAdditions)
  Name: surlabasedesdonneesdufabricantduballast

  SequenceCallModule (SeqCallStepAdditions)
  Name: surlabasedesdonneesdufabricantduballast

  SequenceCallModule (SeqCallStepAdditions)
  Name: surlabasedesdonneesdufabricantduballast

  SequenceCallModule (SeqCallStepAdditions)
  Name: surlabasedesdonneesdufabricantduballast

  SequenceCallModule (SeqCallStepAdditions)
  Name: surlabasedesdonneesdufabricantduballast

  SequenceCallModule (SeqCallStepAdditions)
  Name: surlabasedesdonneesdufabricantduballast

  SequenceCallModule (SeqCallStepAdditions)
  Name: surlabasedesdonneesdufabricantduballast

  SequenceCallModule (SeqCallStepAdditions)
  Name: surlabasedesdonneesdufabricantduballast

  SequenceCallModule (SeqCallStepAdditions)
  Name: surlabasedesdonneesdufabricantduballast

  Can someone tell me what I have to do the release of resources after changing a call sous-suite?

  I don't see a close reference to the Module or the step objects.

• Replace step Fail State causes the sequence fail LW/CVI custom Code generator

  Hello

  I have a Code CVI generator as part of the Toolbox ATML importer.  OR kindly gave me an example of how to change the Type of step as part of the custom Code Generator DLL and that works very well.

  However, if I try to change the step Fail value causes the sequence fail to VTRUE it seems do not set the value when the sequence is examined on a test bench.

  The code I use is:

  TS_StepChangeStepType (stepHandle, & errorInfo, typeDefinition);

  -where typeDefinition can be modified to change the type of step, it works and I can change the type of step if necessary.

  TS_StepSetStepFailCausesSequenceFail (stepHandle, & errorInfo, VTRUE);

  -who does not, the box is always set to VFALSE.

  Is there something that I am missing?

  Thank you very much

  Steve

  Steve-

  You must use the PropertyObject step to change the failure step Option. There should be a line of code the generator of custom Code that calls:

  Get the step as a PropertyObject in case it is necessary to change the properties of the General step
  tsErrChk (TS_StepAsPropertyObject (stepHandle, & errorInfo & stepObject));

  The stepObject is what you need to pass to the TS_StepSetStepFailCausesSequenceFail function as follows:

  Set the Option of failure of step-by-step

  tsErrChk (TS_StepSetStepFailCausesSequenceFail (stepObject & errorInfo, VTRUE));

  Please let us know if this happens to you to correct results.

  -Jeff

• The list of all the steps in a sequence file

  Hi guys,.

  I'm new on the forum of NI Teststand, so this my first topic here. The situation is the following:

  Currently I develop a LV operator interface and I need to have a list of all the test step in a sequence file.

  I am able to list all the steps of a sequence, but in the file of the entire sequence.

  Are there opportunities to do?

  Thanks in advance!

  Hi Maroci,

  first of all, I am also quite new to TestStand, but I still think I can help you a bit.

  Given that your code works for a sequence in the file simply browse all the sequences in the SequenceFile. Consider something like this:

  This help you?
  Edit: Don forgt not (like me) to close the SequenceFile reference!

• get the limits of the step of a sequence in a labview program

  I am writing a labview program to access the different properties of teststand sequences to automatically enter the data of the sequence for the documentation.

  The step.limits.high property is very difficult to recover from the teststand programmatically sequence by simply using the sequence as input file.

  Does anyone know how to get the limits on a stage in a movie file?

  Thank you very much, Mr President.  I'll take here.

• Pass / Fail step post action - option to retest step / fail step / interrupt the sequence on the failure.

  Hello...

  In my main sequence there are a number of Pass / Fail steps, before it a statement indicating an operator to connect cables, etc.

  What I want to do;

  If after the execution of a step, the result is a failure, we would like the opportunity to test again, or, fail step and continue or interrupt the sequence (in case of operator forgetting to plug one USE properly etc.)

  I'm a little out of my depth here in terms of how we could set this up in the "step > properties > Post Action" to give us these sort options, or if there is a different way / better make it quite.

  TIA.

  Jim.

  Do not use the Action.  There is a recall for this thing.

  This example shows what you are looking for:

  http://zone.NI.com/reference/en-XX/help/370052N-01/tsexamples/infotopics/callbacks_sequencefileposts...

  I would like to know if you have any questions on this subject.

  Hope this helps,

• go to the step to another sequence

  Hi guys, how to configure the "GoTo" to take a step into another sequence?

  
  

• Is it possible to run a search/change on all the steps within a sequence?

  Is it possible to apply a find/change to all the steps within a sequence.  For example, if you want all instances of '27_' to "59_", is it possible in TestStand 4.2.1?

  Have you tried hitting "Ctrl" + "F" on your keyboard?  This is what I use all the time and you can find/replace with it.

• How to view the settings for the sequence (info that is displayed when you open the first sequence)?

  Hi, I would like to ask how to view the current settings of the sequence, I'm already working the same information that is displayed when you open for the first time a new sequence

  for example.

  General

  Editing mode: QuickTime DV PAL

  Time Base: 25.00fps

  Video settings

  Image size: 720: 576v (1.4587)

  Frame rate: 25.00 FPS

  Format of the pixels: PAL D1/DV widescreen 16:9 (1.4587)

  Fields: Bottom field first

  Audio settings

  Sample rate: 48000 samples/second

  Default sequence

  Total of the video tracks: 3

  Master the track type: stereo

  Audio tracks:

  Audio 1: Standard

  Audio 2: Standard

  Audio 3: Standard

  I forgot what setting I chose for my current sequence and tried to look under project settings , as well as the sequence settings

  but do not show the news that you see when you open a new sequence for the first time, especially if the edit mode is PAL or NTSC etc.

  How can I find this information which my current sequence is on?

  Thank you

  Sequence / sequence of setting you will find all the information.

  If his pal, you're on 25 or 50 fps.

  the rest is ntsc.