The success of the Audit log

Similar Questions

• Where is the audit log?

  I have a need to run a report on the data in the audit trail for changes to the CMDB, but I have some difficulty to find where the audit log is stored.
  I would have thought it was ar_audit look, but who turned out be wrong.
  Have you tried to find in the schema data, but without success.
  Anyone know where it is stored?
  ThanX

  Just checked - records to audit for these fields are placed in the SU_EXTENSION_AUDIT table. In any case the RV_CI_AUDIT_TRAIL view should display them as well. BTW, I use v.9.1.5 VSM and other versions may behave differently.

• How to send the autdit log to syslog?

  Hi all

  11.2.0.1

  AIX 6.1

  Our auditor TI wants to save our audit of the log files of the operating system, which can be protected by the root, so that - dba oracle (sys) can not touch it. Then the auditor wanted to send it to our server on another central audit trail machine.

  I found this link in google:

  https://sites.Google.com/site/splunkfororacleaudittrails/documentation/HOWTO/howtoenableoracleauditviasyslog

  http://underdarkonsole.blogspot.com/2011/10/send-Oracle-11g-audit-log-to-syslog.html

  The 3rd party software such as kiwis and Splunk mentioned link. Is it necessary to send the audit log to syslog?

  Thank you very much

  zxy

  You do not write.  Oracle sends audit messages to the syslog facility.  It is the syslog daemon which is writing.

  Hemant K Collette

• way to archive the audit

  Where can I change the path to the Archives of verification for the job of managing the Audit logs.
  
  In addition, how to I Delet old job logs.
  
  Thank you
  
  -Lmal

  Change it network file path of archive in the Portal Administration tool > Audit Manager

  Also see the following KB under Metalink:
  Audit Log Management Agent fails
  Article no.: 857242.1

  This article explains how to manage the database space used for audit messages. To deal with the reduction of the number of newspapers of the job, the process is different, but the first step for this would be to make sure that you run the weekly job of cleaning on a regular basis. I'll work on an article for these steps, but you can open a pension case in the meantime.

• How can I see and record Print audit log Server 2008 AD

  We want to know how to check and record the audit log printing to network printer connected with managed print services to the server active directory 2008 and also to authenticate the basic possible print AD?

  Hello

  The question you posted would be better suited in the community pro Windows 2008.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• AUDIT log can be found in DBA_AUDIT_TRAIL! where can I find it.

  Nice day

  Working on Oracle application 12.1.3

  DB 11.2.0.3

  OS Linux 6

  When I try to use enterprise manager or sql command audit, any activity on specific table

  "

  SELECT AUDIT

  ON hr.employees

  WHENEVER IT FAILS;

  "

  Audit succeeded.

  I could not found the audit log in DBA_AUDIT_TRAIL.

  I need to know where to find the audit log to show the new activity for the table.

  
  

  Concerning
  

  Implement the requirements.

  Understand the audit data in the Tables of the Oracle Applications using the (mandatory) Audit Trail (Doc ID 69660.1)

  How to track changes to Oracle E-Business Suite (Doc ID 1262586.1)

  FAQ (Audit trail) (Doc ID 107330.1)

  Thank you

  Hussein

• Alert & Audit Log purge script example

  Hi Experts,

  Can someone point to examples of scripts for

  1 alert & purge the audit log?

  2. rotation of log listener?

  I'm sorry if issues look too naïve, I'm new to DBA activities; pls let me know if more details are needed.

  From now the script must be independent of the versions/platforms

  Kind regards

  34MCA2K2 wrote:

  Thank you very much for your answer!

  If auditing is enabled in Oracle, it generates newspapers or she inserts into a SYS. Table?

  Well, that your settings initialization of the 'check' show?

  For the newspaper of the listener "rotation", just rename listener.log to something else (there is an OS command for that), then bounce the listener.

  You don't want to purge the log of alerts you want to 'rotate' as well.  Just rename the existing file to something else. (there is an OS command for this)

  So this has to be managed at the level of operating system instead of having a utility. Also if this is the case, this must be done when the database is stopped in right?

  No, the database doesn't have to be stopped to rotate the log of the listener.  The database does not give a flying fig on the log of the listener.

  No, the database doesn't have to be stopped to rotate the log of alerts.  If the alert log is not there when he needs to write for her, it will just start a new.  BTW, since 11g, there are two newspapers to alert... the old familiar, now located in $ORACLE_BASE/diag/rdbms / $ORACLE_SID / $ORACLE_SID/trace and the xml file used by adrci.  There are orders adrci and configurations to manage it.

  Yet once again, I leave the details as exercise for the student to exercise his research skills.

  Please confirm my interpretation.

  Thanks in advance!

• Activate the user audit logs and hide the other audit logs account system on computers in a domain by using Group Policy

  Hello

  Please could someone advise me on how to activate the user audit logs and hide the other audit logs account system on computers in a domain by using Group Policy. Your help would be much appreciated.

  Kind regards

  RocknRollTim

  Hello

  Please contact Microsoft Community.

  We have a specific forum for the computers in the domain and they are experts in this field of investigation and would be in a better position to address the concerns. So refer to the link below and post your query on the TechNet Forums.

  https://social.technet.Microsoft.com/forums/en-us/home

  I hope this helps. If you have any questions on Windows, please answer. We will be happy to help you.

• Archive log gap is asleep when the audit function is set to DB

  Hello
  
  I'm a new dba. I am facing a problem to the production server, that whenever audit_trail is set to db, gap journal archive is created on the site of the previous day.
  
  My version of the database is 10.2.0.4
  Operating system is windows 2003 R2
  
  Audit_trail is set to db only to the main site, after you have set the parameter DB when I bounced the database and set the log file, gap journal archive is created in the waiting... I use the LGWR log transport mode.
  
  Is there any transport of newspapers and relationship beteen audit_trail?
  Please note that my log location archive two sites has enough disk space and the drive works very well. Also my primary and standby is in WAN.
  
  Please help me in this. Any help will be much appreciated.
  
  Here's a trace file that can be useful to give an opinion.
  
  
  D:\oracle\admin\sbiofac\bdump\sbiofac_lns1_6480.TRC dump file
  Kill Jun 05 13:46:02 2012
  ORACLE V10.2.0.4.0 - Production vsnsta = 0
  vsnsql = 14 vsnxtr = 3
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  Windows Server 2003 V5.2 Service Pack 2 Version
  CPU: 2 - type 586, physical cores 1
  Process affinity: 0x00000000
  Memory (success/Total): Ph: 16504 M / 18420 M, Ph + FCP: 41103/45775 mafuta, GOES: 311 M / 2047 M
  Instance name: sbiofac
  
  Redo thread mounted by this instance: 1
  
  Oracle process number: 21
  
  Windows thread ID: 6480, image: ORACLE. EXE (LNS1)
  
  
  NAME OF THE SERVICE :() 13:46:02.703 2012-06-05
  SESSION ID: (534.1) 2012-06-05 13:46:02.703
  kcrr.c 13:46:02.703 58902 2012-06-05
  LNS1: initialization of communication LGWR
  LNS1: connection to the KSR channel
  Success
  LNS1: subscribe to channel KSR
  Success
  2012-06-05 13:46:02.750 58955 kcrr.c
  LNS1: successfully initialized ASYNC = 1
  Destination is specified with ASYNC = 61440
  kcrr.c 13:46:02.875 73045 2012-06-05
  Sending thread 1 seq 2217 online journal [1 logfile] in standby mode
  Repeat customer shipping performing a pending connection
  kcrr.c 13:46:03.656 66535 2012-06-05
  Connected mode standby successfully
  Customer logon and security successful trading!
  Archiving on blocks of destination sbiofacdr ASYNC = 20480
  Allocation of blocks of ASYNC: previous blocks = 0 new blocks = 20480
  Open log file [logno 1]
  2012-06-05 13:46:44.046
  Error 272 writing log file archive ensures the host 'sbiofacdr '.
  ORA-00272: the archive log write error
  kcrr.c 13:46:44.078 62692 2012-06-05
  LGWR: I/O error 272 archiving log 1 to 'sbiofacdr '.
  kcrr.c 13:46:44.078 60970 2012-06-05
  kcrrfail: err dest:2: 272 explosion of strength: 0:1
  2012-06-05 13:47:37.031
  kcrr.c 13:47:37.031 73045 2012-06-05
  Log fil 1 seq 2218 online shipping [logfile 2] in standby mode
  kcrr.c 13:47:37.046 73221 2012-06-05
  Stop [due to no ASYNC destination more]
  Again Push Server: Release the buffer ASYNC PGA
  LNS1: Make a channel of delivery for the next time around...

  Hello again;

  I believe you can discover that restore you rates of production using LOG_ARCHIVE_TRACE:

  SQL > show parameter LOG_ARCHIVE_TRACE

  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  log_archive_trace integer 0

  http://docs.Oracle.com/CD/B19306_01/server.102/b14237/initparams107.htm

  In addition to the SDU, you can define SEND_BUF_SIZE and RECV_BUF_SIZE

  This is the Oracle document on this:

  http://docs.Oracle.com/CD/B19306_01/network.102/b14212/performance.htm

  You can define SDU in the tnsnames.ora thus:

  PRIMARY =
    (DESCRIPTION =
      (SDU=32767)
         (ADDRESS=(PROTOCOL=tcp) (HOST=) (PORT=1521)0
      (CONNECT_DATA=
        (SERVICE_NAME=PRIMARY.hostname))
  )
  

  The 'database Net Services Administrator's Guide' post above link is probably the best source of information.

  Best regards

  mseberg

• location on the system of audit logs on the windows system

  Hello
  
  What is the location on the System Audit logs on the windows system? I couldn't find any newspaper to < intradoc_dir > / bin directory?
  
  Thank you

  Hello

  IdcServerNT.log is the one that corresponds to audit logs of system that is defined for the AAU.

  Thank you
  Srinath

• Failure of the audit on the iPhone, but works in iTunes

  Hello

  I had a strange problem:

  I can log on successfully to my desktop (Windows) by using my AppleID, can see my account balance and buy free apps.

  But I use the same AppleID on my iPhone 6Plus, it always shows: "failure of the audit, your Apple ID or password is incorrect."

  can anyone help?

  Thank you very much.

  Hi all

  After 2 hours of research and new attempts, I finally solved this problem.

  1. just to keep a new attempt on the iPhone, until the account is locked.

  (Note, only the account on the iPhone is locked, can I still use iTunes Windows and web to connect on the same Apple ID]

  2. then follow the instructions on the screen to unlock the account.

  (you will be asked 2 secret questions when the account is set up a few years ago)...

  Once the reset is OK, the same account is included to connect the iPhone and buy apps.  (Yes..!)

  Hope this will be useful.

  kpang1

• I have can´t of the cbs.log file

  Hello world

  It seems that never ends, now it s the file cbs.log that says access denied.

  OK, after you have installed successfully (and finally) sp1 of vista, I ran once more the chkdsk and sfc/verifyonly to verify if everything was ok, as if it was before I ve installed sp1, which was: no no violation of the integrity of the errors found, files damaged, everything seemed just fine for me, but now After installing sp1, the sfc/verifyonly said that Windows found violations of integrity resources Protection and the details are in the cbs.log file, which I was able to access so far, but now, when I try to open it, it says "access denied" - what happened between that made the system go like that and can it be resolved?

  Anyway, desperate, I tried a sfc/scanow in the hope that it would solve this problem, this 'thing', well actually he pointed out that the Protection of Windows resources found and managed to repair damaged files and details could be found at c:\windows\logs\cbs\cbs.log, but as I said before when I try to open this file it says access denied.

  So I rebooted my pc and hope that everything would be ok, given that the sfc/scannow said that the files when repaired, so I thought. Unfortunately, that s not the way it is, after the reboot, I ran sfc/verifyonly, just to confirm that everything was actually ok, well it still signals once Windows Resource Protection found violations of integrity and the details can be found in the cbs.log file.

  Right now my computer seems to work very well, besides that of course, the problem is I m feling completely lost here with this 'thing', it just doesn't feel good and probably it's just me, maybe I m too picky about this stuff, everything must be running ok so I can be at rest with myself, please can someone help me with this , can someone explain me what is happenning, so I can understand it?

  I think that worst of all, at least for me, is not to know what is happening, it s as I have, I would even say obcessive, need to understand not only the solution but most of all the cause of it, the mechanism of it s, I need to understand the process, don't´t you all?

  Pleeaase helps.

  Well be Pedro Borba

  Pedro Borba,
  You must copy the CBS and paste it on your desktop or Documents folder.  Then, open the copied version of the file.  Here is an article which also gives instructions on reading and research the CBS log file.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• missing events in the event log

  I'm really new and can't help otherwise explain what just happened to me. I am running Vista home and checked my reliability and performance monitor. He came back to me with missing events to the event log. 14% of my missing log files. He told me that my buffer size and maximum ETW memory buffer is not obtimal that the data sets are collected. I have AVG free virus and found no problem. I had a lot of problems with the security of the networks and curious to know for myself if someone takes information just behind my computer. Everyone acts as if I am perinoid, but I had log events while at work and shut down the system. Some are could not log on to attemtps still more successful. Many programs also show other computers on my network even glancing only ethernet to my dsl modem. So I'm not under xp but have the same diagnostic report. I would be grateful no sign, that I am not paranoid. thanx

  Hi Dancin' madman,

  Welcome to the Microsoft Vista answers Forum!

  I would like to ask you a few questions in order to get a better understanding of this issue so that we can better help you.

  (a) what version of Vista are you using?

  (b) is connected to a domain, or more than 10 computers in your computer network?

  (c) what the event log you are trying to check?

  For example, if you check the log of events for an Application, then you must

  1. click on Start, type Event Viewer in the start search and press enter

  2. in the Windows logs , select the Application, it should be under the winlogon (the last)entry. Right click on the Application and select Properties.

  3. in the Properties , you can check for the latest event logs and check the settings if it is set to replace the events, if you want, then you can change the settings.

  Because you are worried about the security of the network, you can try first run a scan of online security.

  Follow the below links for analysis online on your computer to verify if there is a malicious software on your computer.

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Microsoft.com/security/malwareremove/default.aspx

  You can also check if the Services of Windows Event log and dependence are started.

  1. Click Start, type Services in start search box and press ENTER.

  2. Locate the Windows event log in the mentioned Services.

  3. check if the status is started. If the condition column is blank, right click on the Windows event log Service and select start.

  4. open the Windows Service event log, select dependencies. In dependencies, select the Windows event collector and click ok to start the service.

  5. also check the dependencies in the Windows event collector and launch service dependencies by clicking OK.

  Hope the helps of information.
  Please post back and we do know.

  Concerning
  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• A snapshot could not be created. Check the event logs "VSS" and "SPP" application for more information

  Original title: a snapshot could not be created. Check the event logs "VSS" and "SPP" application for more information. Details: shadow enough storage to create the copy storage file or other shadow copy data. Error code: 0 x 81000019

  I tried to back up my files using an external hard drive (which I have done before with Windows 7 64-bit), but recently I get the same error code. I have re-formatted external hard drive, run diagnostics on it, restarted the computer, etc and nothing seems to work. I also tried both options posted in another forum with the same error and too, they were not successful (external is already NTFS and now that it has been re-formatted is completely empty). Windows has more suggests? I hope not to have to use drag and drop my files whenever I want to save my computer.

  Thanks for the help!

  Read this article because I believe that the amount of free space in the 100 MB partition is too small. Article is a different error code, but the technique to increase the size of the 100 MB partition is the same.

  Note: Backup of your hard drive as described in the article.

  How to fix error code: 0 x 81000033
  http://www.PAGESTART.com/win7br0x8100003301.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Unable to show the data logged in simple cdc?

  Hello

  I want to get the changed data only inserted into the target table.

  For this,.

  I create model & select JKM Oracle Simple.

  I create the data store (with data) source & target (empty) table.

  Next. I add source table to cdc and start log.

  again, I insert a row in the source table. After I check source table-> cdc > data logged--> "changed data are coming with success.

  
  

  
  

  
  

  I create interface for the changed data only inserted into the target table.

  I drag the Table logged as a source and the required target. On the data from the Source store, check the option box " JOURNALISÉ DATA ONLY " for this example I used IKM SQL update SQL command.

  I checked the source data after selecting " JOURNALISÉ DATA ONLY " option in the properties of the source. I have not logged data.

  
  

  Please help me,

  Thanks in advance,

  A.Kavya.
  

  
  

  You must define who subscribed using Jornalized data, in this case, 'CONTROLLER '.