The survey code will be corrected?

Similar Questions

• looking to purchase a copy of the elements after the trial. However, basket indicates platform: Windows. I need for Mac. Before I commit the activation code will work for the Mac. Impossible to find anywhere on the Web site to buy different versions.

  looking to purchase a copy of the elements after the trial. However, basket indicates platform: Windows. I need for Mac. Before I commit the activation code will work for the Mac. Impossible to find anywhere on the Web site to buy different versions.

  Hi Mljohno,

  If you search for items 14, go into products from Adobe, click on 'Buy' in front of the name of the product and use the drop down menus to specify Mac or Windows full version or upgrade.

  Best,

  Del

• The button code will not replace the stop code

  Hello

  I have been stuck for days trying to figure this out and would appreciate any help offered.

  In an HTML5 document, I use excerpts of code (HTML5) to make an animation stops at some of the images in the scenario and then buttons take the Viewer to specific sections of the timeline.

  

  The Start button must essentially ignore the playback head on a structure ahead of the frame with the code to stop... but it doesn't. When I preview the video, I can click on the button, but the playhead does not advance the flag "getgoing. I tried this with both specific chassis numbers, but that no longer works.

  I did test files containing a single button and the stop code and everything works fine. But in this file larger with several going on, the buttons stop working. Certainly, I have imported image sequences that I made in After Effects (my favorite animation software) and Animate takes more time to save and preview because of this. I don't know if the mere fact of having sequences of images as graphic symbols would change the functionality of a button, but I'm not nothing throw.

  Thank you!

  The debugging 101 button: first thing make sure that the event handler running one) in fact, b) to what you think it is targeting. The two goals can be accomplished by sticking a trace() statement in the button click event handler that prints everything that you target your call gotoAndStop(). For example, if you have this:

  paramecium.panda.parallelogram.gotoAndStop (451);

  Add this entry:

  trace (Paramecium.Panda.Parallelogram);

  If nothing prints when you click the button, or it prints "undefined", you will have significantly reduced the problem.

• Images in the slide show will not correctly display on mobile phone

  Hello

  I have a site that I used several slideshows, in areas I generally used a rectangle and fill it with a photo.  This was done because my client wants to be able to update the images through the business catalyst.  Unfortunately, seen on a laptop (I am using iOS 7) slide show images do not display correctly.

  What can be done to fix this?  Is there an another workaround I should try?

  Thank you!

  Hi Nicole

  The images you use on a page of parties are tense, if you check the image frame you can see that.

  Thus the image frame is stretched above the image aside, they do not display properly. If you resize since the end of the Muse, then also it is not fixed because Muse remembers the size of the image that you inserted and seen, Muse stretches the image size original than the way in which it was inserted.

  Please resize the images outside the Muse, use any image editor like Photoshop and then use the exact size of the image on the page frame.

  This would solve the problem.

  Thank you

  Sanjit

• Adobe Application Manager, absent of the file and will not correctly redownload

  When trying to open Photoshop, I got a pop-up saying "Adobe Application Manager to start your trial, is missing or damaged." I followed the link to download a new copy, but I keep getting the same error. I tried it redownloading at least five times, restarted my computer and using the cleaning tool from Adobe to clean my Adobe files and re-download creative cloud as a whole. When I redownloaded creative cloud, the desktop app open very well, but the Photoshop application now has a sign of orange error beside it saying the update failed. The failure message said there was an unknown error and contact customer support. I have a Mac OS X.

  If please remove Adobe Application Manager to help cleaning tool and reinstall it with the help of Adobe Application Manager Windows | Macintosh

• The adjustment brush does not work.  I choose and the pin code will appear on the image, but when I paint with it, nothing happens.  Even the mask won't show too much.

  I have Lr 5.7, the adjustment brush has stopped working.  I upgraded to Lr 6 and still an adjustment brush does not work on both versions (running on the same PC)

  I have antivirus programs and malware which have rubbed my machine, no problem.

  This is the first problem I encountered.  Seems to have worked very well last week, then all of a sudden this function is toast.

  Help.

  Press O to display the overlay that shows the painted mask.

  Make sure that the density and the flow is not set to 0.

• How to release the source code (only) for first level VI?

  Hello

  I develop an add-on for an application that I have. The demand is large (more than 1,500 VI) and the screws are set up to compile with for most of the default settings (there is a first level VI, some with visible front, most of them are not visible).

  The customer wants that source code for the work that I do, and he will use the many existing Subvi. The addon itself will be a Subvi (I have a Main.vi that basically opens 'front' and it is a new screen). The sub - VI existing basically make data collection and treatment, and the new code will perform additional processing and have a nice GUI for existing code. The customer wants the source so that they can make changes as needed.

  Is there an easy way to simply provide the source for the first level VI? Basically, I want to give them M.vi, where M.vi name n.vi, o.vi... etc, but o - z.vi should be non-free. In addition, M.vi is called by Main.vi, which opens A screens - M.vi

  One option is to copy the entire application, then open each sub - VI and save it without Source Code. But with so many files, this seems like a bad idea. So, I also maintain two applications.

  Good ideas out there? It seems if easy in other languages (using object files) it looks like there should be a solution here I don't see... Thank you!

  rnelsonee wrote:

  Ah! I completely forgot to Save with Options. It's been so long that I had to deal with this type of problem.

  OK, to ensure that:

  I opened my first level VI, saving Options with-> apply the password (or remove diagrams) and then give it to them. I also provide a normal backup of their VI, with source.

  I still about 100 screws which are called dynamically are not part of the VI treeand I would still have to re - register with a password, but it's better than every single VI. Thank you!

  Use the option duplicate hiarchy and preserve...

  apply to all...

  at least as far my memories are good.

  Ben

• What is the HTML code I need Adobe Flash to play a video file embedded in MP4 (8 MB)?

  What is the HTML code I need Adobe Flash to play a video file embedded in MP4 (8 MB)?

  Thank you

  Mark

  Here are a few ways, one using the Netstream class using the FLVPlayback component.

  The NetStream approach, what follows in the timeline code will play/loop for the planned mp4 file...

  var video: Video;

  var connect_nc:NetConnection = new NetConnection();
  connect_nc. Connect (null);

  var stream_ns:NetStream = new NetStream (connect_nc);

  stream_ns.client = this;

  function netStatusHandler(p_evt:NetStatusEvent):void {}
  If (p_evt.info.code == "NetStream.Play.Stop") {}
  stream_ns. Seek (0); for the video loop
  }
  }

  stream_ns.addEventListener (NetStatusEvent.NET_STATUS, netStatusHandler);

  video = new Video();
  addChild (video);

  video.attachNetStream (stream_ns);

  stream_ns. Play("path_to/Your.MP4");

  For the FLVPlayback component, add it to the stage, give it an instance name ("public service" used below), assign your file mp4 ("path_to/your.mp4") as the source property in the properties panel and select the option autoplay as well.  Place the following code in the timeline...

  fp.addEventListener (Event.COMPLETE, playAgain);

  function playAgain(evt:Event):void {}
  FP. Play();
  }

  To put the Flash file swf in a html page, in the settings of publication set to publish a swf and an html page.  Publish the file one the html page will be created for you.

• access code will work no - has rejected the correct password, deleted the data

  Hi people

  Had a problem with the iPhone OS 9.3.1 (6 s)

  The password was rejected, even if she did the same every time: it worked randomly.  This question has followed a request to change the password to another.  I put in an alphanumeric password with a special character, as he refused to let me use the previous password.

  I tried to change the password but failed at each point and wouldn't let me delete the iPhone either.  He decided to spontaneously clear the data while it was in my pocket.

  I restored the iPhone and will monitor.

  I was wondering if anyone else has had this problem and it could be a virus or something.  Could it be spyware? Or simply corrupted software?

  Your thoughts appreciated

  Unless your phone has been jailbroken (and I doubt it was) it wouldn't get a virus.

  It's a working phone? Is there an exchange account or an email from work?

  The request came via a pop-up of Safari?

  If the request came from Safari, I would follow the steps below. If it's a working phone that I would like to talk to your people in TI.

  Close Safari completely from the window of the selector app by double clicking the Home button and slide up the preview pane of Safari until it disappears from the display. You may need to search the Safari part covering scribbles to the left. Then go to settings > Safari > clear the history and data from the Web site. Then perform a forced reboot. Hold down the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears.

• Installation of Windows Vista Service Pack 2 (KB948465) will fail with the error code 800F081F

  Hello

  I tried to install windows service pack 2 for vista via windows update, but it fails everytime with error code: 800F081F. I tried to run Microsoft FixIt and systsme even update the tool but no luck. even the system tool update crashes while ' installation of hotfix for Windows (KB947821) (update 1 of 1)...» ". No online solution proved to be correct in my case. Help, please.
  Thank you

  Hello

  System update readiness tool will take some time, so I suggest you wait a while until the process is completed.

  You can find newspapers by accessing this folder.

  c:\Windows\logs\cbs\checksur.log

  I would suggest trying the following steps and check.

  Method 1:

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Back up the registry - http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Methods 1 and 2 require changes in the registry to do. Make sure that you back up the registry before you proceed.

  I would have you look at the article-

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2-

  I would have you look at the article-

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997#appliesTo

  Note: The Chkdsk command will try to fix bad sectors on the hard drive. All the data on these areas could be lost in the process. It is also possible for the computer to enter in a start State no.

  Proceed at your own risk.

  In addition, see the reference article-

  Problems with installing updates

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-installing-updates

  Answer if you need more information on this, and we will be happy to help you.

• My windows update will not install the new version of windows update, I get the error code 80070020 on a 64-bit vista SP2

  My windows update to install a new version of windows update says it acts like it will download and install it then gives me the error code 80070020 and says that my computer is unable to download or install new updates or new version of the windows update. I have a 64-bit windows vista SP2 and my avira antivirus program that has a real-time protection. I tried to do a clean boot upward and tried every possible tip I found on the Microsoft and through suggested methods help panel, I found. My computer has Avira Antivirus that has real time protection I deleted and tried without that somewhere because he said it could be antivirus programs that include real-time protection. Does anyone have advice good?

  Hello

  1. What are the troubleshooting steps correct you did to fix the problem?

  2 did you a recent software or changes to the material on the computer?

  I would say allowing you to run the FIXIT from the link provided and check if it helps.

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

  You can also try the manual steps and check.

  If you follow the manual steps to start the computer in a clean boot state, remember to start the computer in normal mode after you have completed troubleshooting.

  Note: when you are finished troubleshooting, follow step 7, mentioned in the article to start the computer to a normal startup.

  Note: It is possible that some data could be removed if infections are detected.

  Hope this helps and keep us posted.

• Why NAS network credentials are missing (error code 0 x 80070056) even if the username and password are correct?

  When I try to create a system image on a network location Windows asks the credentials network for the target location. The credentials, I get are correct, but I still receive an error message that the location cannot be used because the password is not correct (error code 0 x 80070056).
  Screenshot

  The location of the target is a share on a netdrive - D - Link DNS-323. And the part I want access to the backup is already mapped to my computer.

  In fact, I got the same error when I traced the netdrive.
  Instead of just using the entered user name Windows 7 adds the computer as field in front of the user name-/ login in this schema: Name\Login name of the computer

  I guess, because of the addition of 'domain', authentication fails because the network drive does not recognize the name of the connection with the addition of domain. The network credentials window Windows always said that the (certainly correct) password is incorrect. If you check the box to save connection information, the Explorer will open up the reader, even if authentication failed. And now the mapped drives automatically reconnect and can be viewed on the browser without problems.

  Is this behavior a bug in Windows 7? Any way to fix or work around this problem?

  Hi Th_Row,

  You are on the right track with the help of the name of the computer you want to connect. Have you tried to use the domain\username of the device name? The default device name is dlink-[last 6 characters of the MAC address].
  For example: dlink-ECEA07
  If your final username should look like this: dlink-ECEA07\UserName
  You can also connect to your NAS server and click the device on the left. On the screen you should see the name; Is the name of your device.
  Try that and let me know if it works!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Logic problem.  JavaScript will not correctly add the values

  Simple logic problem.  I have radio buttons fixed to values 1 or 0, but the simple addition of characteristic adobe has used it add up?

  Basic story, I need to display the value of how no. GOs there, then multiply the amount of GOs No. against a locker's worth.

  While subtract 100 to get an academic score.

  Code to determine the value of a set of radio buttons;

  Switch (this.getField("Group_1").value)

  {

  case 'GO ':

  Event.Value = 0;

  break;

  case "NO GO":

  Event.Value = 1;

  break;

  }

  On the calculation tab, I then use the first calculate (sum +) selection to determine all areas, I would like to add (total of 24 possible selections) field name is (TOTALNG)

  After that I have a hidden field that multiplies the previous value TOTALNG * 4 (which represents the value of the note I want to determine each no. GO), then displays

  the total final that I simply subtract 100.

  It is, he does not appear correctly the initial value of the no-go. It is always 1 account back up to what it should be. I even select the radio to go button which resets the value to 0, but down altogether, it counts as if it is chosen and gives a value of 4.

  A way simple code so far, even seems (if the way im put it on foot does not tell you that I know little) but I do not understand what I can be missing. I even put a field of 0 to add in now just to see if she needs another value to add against just in case where there is that one number GOING to add.

  Any idea? My form is a probably a mess, but I think the code is simply stated if anyone is willing to look and laugh for a second to my work.

  Thank you

  The problem seems to be the order of computation of field, only not with the

  code. You can configure via a Set - other tasks - field form editing mode

  Calculation order.

• I can not pair my Apple Watch with my iphone 6 s so true the automatic procedure freezes the app on my iphone. If manually matching the 6 digit code will appear on the Apple Watch. I have the current ios 10.0.1

  I can not pair my Apple Watch with my iphone 6 s so true the automatic procedure freezes the app on my iphone. If manually matching the 6 digit code will appear on the Apple Watch. I have the current ios 10.0.1

  does anyone have a solution to this?

  Hello

  The following steps can help (try again after each):

  • On your iPhone, in the application of the watch, go to: Watch My > general > use > software update - remove any file update, if one is displayed.
  • Delete all profiles beta (on your iPhone and/or the watch), then restart both devices (this applies only if you have already participated in a program of Apple Beta software).
  • Restart your iPhone and your watch:
    • Close open applications on your iPhone:
      • Double-click the Home button, and then drag upward on each Preview app to close.
    • Close the two devices together, and then restart your iPhone first.
      • Restart your iPhone, iPad or iPod touch - Apple Support
      • Restart your Apple Watch - Apple Support

• Pair cant my apple wireless keyboard for my new tv4 apple... He will not be the Apple TV and not ask the pairing code enter... Anyone know what I need to do?

  Pair cant my apple wireless keyboard for my new tv4 apple... He will not be the Apple TV and not ask the pairing code enter... Anyone know what I need to do?

  The ATV4 does not work with any wireless keyboard. The only alternative to the built-in function 'keyboard' is the iOS app.