The system image does not work on win7 Home Premium HP Pavilion Elite HPE 250f

Similar Questions

• Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."

  Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."  How can this be repaired?

  Hi rebick,.

  Try the troubleshooting steps presented by spirit X in this thread.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unexpected error in the property page. The VSS service uses the system restore does not work. Error (0 x 810000202). __

  original title: "there was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information, see the journal of events (0 x 810000202). __

  "There was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information see log of events (0 x 810000202).

  Please try the troubleshooting below to check the status of the shadow copy Volume service

  1. click on start > all programs > Accessories > run

  Type the following text in the run window, and then click ok:

  Services.msc

  You will get the Services window.

  2. Please check service Volume shadow copy service is "started" and "automatic".

  If these services are not set to "Started" and "Automatic", please, do a right-click on the service and select "Properties".
  On the window properties, please change the startup type to automatic, and use the Start button to start the service.

  Click on apply, click ok.

  Close the Services window

  Restart the computer and check if the problem occurs again.

  If the problem persists, start your computer in safe mode and try to do a restore of the system again. Temporarily disable your anti-virus protection

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  I hope this helps
  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Equium - dead after hibernation, the system recovery does not work

  Hello
  I'm trying to fix the laptop of one of my friends, but so far without success. It's a Toshiba Satellite with Vista.

  She had problems with a black screen after startup in Windows Vista. I found a work around for this problem, but it was a little complicated for her... She doesn't know much about computers. ;)
  So I but it would be a good idea to tell him to always use hibernation. However, when I put the portable standby extended, all seemed fine, shutdown, power off.
  I tried and then turn it back on. Light turns green, cd drive makes noises. Nothing more. Screen remains completely black. No sounds. Keyboard input does not work. No access to the Manager startup or anything else. He left light until I pass him by pressing the button for a few seconds.
  I removed the battery and put back in place, without result.
  Connection to an external monitor shows no results.
  When I put the original CD recovery Toshiba, no results.

  So, basically a cell phone dead. Ah yes, I'm in the Brazil in a small village, away from the stores of tech support or computer. Maybe a problem material, but all was working fine until I used the hibernation.

  Any help or ideas would be very appreciated! ;)
  Daniel

  Hello

  My laptop could not wake up after hibernation too but I managed to wake up again.
  This;
  Disconnect the power adapter and remove the battery.
  Now, you will have to wait a while 1 hour should be sufficient, but you can leave the laptop disconnected for a longer time (all night long)

  After that, you must connect the battery and AC adapter and should try to light the device if it will not help you then you are in trouble
  This would mean that a serious hardware problem causing this problem and I doubt you could remedy without any help from the ASP.

• Windows Installer does not work with Vista Home Premium 32-bit system.

  My computer did not an automatic update in over 6 months.  I discovered this when I could not install my tax preparation software.  the error message is gone "windows installer does not work, a file may be damaged, contact support windows technique.»

  SFC

  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type

  sfc/scannow
  

  For the results of the SFC
   
  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

  The system update tool

  Ensures the consistency of the folder WinSxS (Side by Side).

  http://Windows.Microsoft.com/en-AU/Windows7/what-is-the-system-update-readiness-tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To see the results click on Start - All Programs - Accessories - right click on command prompt and choose run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Reregister Windows install

  Desktop shortcuts are shortcuts to the Windows Installer which then starts the Office program.

  Click Start - all programs - Accessories - right click on command prompt and choose run as administrator. Type

  regsvr32 c:\Windows\System32\msi.dll
  regsvr32 c:\Windows\System32\msihnd.dll
  regsvr32 c:\Windows\System32\msimtf.dll
  regsvr32 c:\Windows\System32\msisip.dll
  c:\Windows\System32\Msiexec.exe/reg

  That you re-register Windows Installer.

• I have the same problem. When I do a system restore, I get an error message. The service of shadow copy of Volume used by the system restore does not work. Error 0 x 81000202

  My security service center cannot be started too.

  Hello

  Malware scan

  malware stops normally you use the system restore protect themselves remove you

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.
  7.  

  and try to do a restore mode safe

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.
  7.  

  and if using norton disable product anti-forgery protection

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

• Microsoft - accidentally not uninstalled games not in the Recycle Bin, lost the system restore does not work

  Hi I have uninstalled a few programs and lost microsoft games in the process, have tried the system restore and cannot find them in the Recycle Bin, restore says system 0x8100001A and 0 x 810000101 code

  Hi I have uninstalled a few programs and lost microsoft games in the process, have tried the system restore and cannot find them in the Recycle Bin, restore says system 0x8100001A and 0 x 810000101 code

  Assuming that yoy are using Vista...
  Suggestions:

  1. start > all programs > scroll down to find GAMES > open it. MS games still appear? > If Yes, click on one of them > it does not open and it works?

  2. see if this Microsoft Support can be applied to your situation:
  http://support.Microsoft.com/kb/940263 . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• DVD drive does not work in Vista Home Premium

  This is a fairly new computer with Vista Home Premium and the DVD player has never worked and HP the manufacturer can't help me.  It seems that something is missing as a decoder I thought to be a part of Vista

  Hi ck111000,

  Thank you for using Vista answers Forum.

  Fact the show drive upward in the 'Computer' window (start > computer)?
  Are you an error you may post in this forum?

  Here is an article that your problem:

  "Your CD or DVD drive is missing or is not recognized by Windows or other programs"

  http://support.Microsoft.com/default.aspx/KB/314060

  Please let us know if that helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• XP will not acquire an IP address. Start tcp/ip and obtain the dependency service error. Public static IP and the system still does not work.

  This system was given to me the difficulty.  It is clean of viruses and spyware, it was at a time given some.  Now unable to connect to any type of network, IPs as 0.0.0.0, will not be renewed.  Get dependency errors when I try and start TCP/IP.  I reset the winsock stack.  Any suggestion at this point would be useful.

  Hi MarkReeves,

  1. What is the accurate and complete error message?

  I suggest you try the steps from the following links in the article and see if it helps:

  The network status icon may display a message 'Acquiring network address' after an address is already acquired in Windows XP Starter Edition

  How to reset the Protocol Internet (TCP/IP)

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

  I hope this helps.

• Helpctr.exe does not load in the Start Menu. System Restore does not work.

  Help and Support not be loading not on the Start Menu. I get a msg of error helpctr.exe is not found. I run for the file with no result. Also the system restore does not work even in safe mode. I use XP Home SP3. Any suggestions? Thank you.

  No problemo!

• Envy of HP dv7-7332ea - System Restore does not work on windows 8

  Hey there,

  I recently bought this machine about a month ago. I used the Windows 8 System Restore feature to restore my pc to a previous state.

  However, after running it, I got a message saying: it failed and to ensure my anti virus is disabled. Accordingly, I have disabled Norton and tried again but it still does not work.

  Previously, the only problem I had with the pc was that he locked himself completely and therefore I turned off the machine that I have been unable to close.

  When I rebooted, HP Support Assistant could not run and so I uninstalled and then reinstalled from website theHP. It is now resolved. The thing is I'm a little scared that something is wrong with the machine that is the reason why I think that the system restore does not work.

  I'm a newbie on the computers here. Could you please give me some advice to diagnose if there is nothing wrong with my machine and fix the system restore?

  See you soon,.

  Damon

  Hi Damon,

  Norton is a component called 'Tamper Protection' that should be disabled before a system restore can be performed - for more details on this topic, see the following link.

  Disable self-protection.

  Kind regards

  DP - K

• System Restore does not work, once again.

  Hi, I read a topic of 2010 that has not yet been answered. I worked with a tech at Microsoft by e-mail, but when I answered: System Restore didn't work. Now it does not work yet. I had installed Returnil system safe, but I got an error msg 0 x 80004005, (third-party antivirus), so I uninstalled the program. I went through the registry and delete something with Returnil all 4 sections of the registry. Remove the common files folder that was left after uninstalling. Restarted my computer several times. I use MSE, with free versions of spywareblaster and MBAB, who are both at the request not in real time. I tried to restore to a time before I had installed Returnil first, (I installed and uninstalled 3 times in 2 days) and could not. I tried to use a snapshot to restore spywareblaster and managed to restore to the point 2 x before installing because forward the installation of point returnil has been altered. At the moment no malware has been detected and no threat of MSE. What to do next?

  Thanks in advance for any help. Liz.

  Here's my usual route to find out how to reinstall System Restore:

  If you have already run MBAM and SAS, temporarily disabled your antivirus and anti-malware applications and tried your Safe Mode system restore and you still get the restoration of the system to work, you must reinstall just your system restore.  You do not have to reinstall XP - just reinstall the system restore part.

  System Restore is a frequent target of attacks by malicious software.

  When you reinstall the system restore, all your current Restore Points will be deleted and you must restart your computer once the installation is complete.  After the reboot, a new Restore Point will be created as a new point of system control in your calendar of SR.

  If your system had a malware infection, it could be that some of the files in your old Restore Points are also infected up to wipe out the 'old' and new is often a good idea if you wonder if the old Restore Points are infected or not.

  Assuming that your XP is installed on drive C of your computer:

  As you go through the reinstallation of the RS, the resettlement will be asked to locate certain files as you go along and ask your XP installation CD.   If you do not have a genuine XP bootable installation CD, you can change the path where Setup looks for files one at a time, because they are needed.  More on that later.

  Navigate to the following folder:

  c:\Windows\Inf

  Locate and right-click the following file:

  SR.inf

  Choose Install

  If you can not see the sr.inf file, set up your system to show hidden files and show file extensions.

  Click on tools, Options, view and turn on "Show the hidden files and folders" and uncheck "Hide extensions for known file types", then you should be able to see the file c:\windows\inf\sr.inf.

  Installation can request files from the c:\windows\inf\386 folder.  It would be your installation CD bootable XP genuine if you have one and the Service Pack installed on your system must be the same as the CD that you will use.

  You don't need absolutely a CD to do the reinstall, because files must already be on your system somewhere if SR was working before.

  If you are prompted for a file, and you can't find it where I suggest in my example below (it works on my system), you need to search your hard drive and find where the files on your system.

  If the request to a file and you don't know where he is, let waiting for installation and click Start, search, and search for it
  has requested the file and find it on your system.  If SR has already worked before, the file is already on your system somewhere.

  Search finds the requested file, go back to the installation and specify the path where you found the file requested and click OK.  Installation can request several files along the way, but you can find them all.

  Here's how my system works when I reinstall SR when I pretend that I don't have a genuine XP bootable installation CD:

  When you are asked:

  SR.sys

  Point the install in c:\windows\system32\drivers

  When you are asked:

  c:\windows\system32\srclient.dll

  Point install it in c:\windows\system32

  When you are asked:

  Filelist. XML

  Point of installation at c:\windows\system32\restore (or c:\windows\ServicePackFiles\i386)

  When you are asked:

  srframe. MMF

  Point installation c:\windows\system32\dllcache (c:\windows\system32\restore)

  Once installation is complete, you will receive a message that you must restart your computer.

  Restart your computer and look at your schedule of SR.  You should have a new point system control in your calendar.

  When you get SR working again, I ran MBAM and SAS to make sure that your system is reasonably clean of malware.

  The day that you think you need to help the system restore you is not the day to discover the system restore does not work, then you need to test.

  After the reinstallation, manually create a Restore Point and test the restoration process and make sure that you are convinced that it works from one end to the other.

• System Restore does not work completely. Virus problem?

  When the System Restore dialog box asks me when I want to restore from I can not pass separating two to another. The instructions are to click on a date "BOLD", but most of the dates are "BOLD", (b) none of them are clickable outside today and (c) the back arrows for the previous month, while only clickable, do nothing.

  I think I have a virus or somesuch and wants to do a restore. Maybe the virus of going to stop.

  WXP SP3 Prof

  Viruses often attack the system restore because it's such a threat to them - which is certainly possible.  Unfortunately, all my anti-virus, anti-malware and anti-spyware solutions are for Vista (which is the Forum, you are in).  You must post this question in the appropriate forum where they have the information, procedures and links to help you.

  One thing, if the system restore does not work in normal mode, it sometimes will run in Mode safe then start safe mode and try it.

  In addition, if you use any Norton product, turn it off, then restart and try to restore again - Norton is known to cause problems with system restore.

  Sometimes, the problem can be solved by turning the restoration of the system off and then back on.  Unfortunately, a side effect of this is to lose all your restore points you want to restore this may not be such a good option to try (even if it can correct the underlying problem): http://support.microsoft.com/kb/310405/en-us.

  If none of the above works, please repost your question on the Forums of XP to: http://social.answers.microsoft.com/Forums/en-US/category/windowsxp where the XP experts will be happy to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The right click "rotation" clock or function in a clockwise direction counter on my images does not work

  The right click "rotation" clock or function in a clockwise direction counter on my images does not work
  There is a range of adjustment that may be messed up?

  You are under Win XP and the display of photos with Windows Picture and Fax Viewer?

  Explain what you mean when you say "does not" you receive an error?

  The following command will force a reinstall of Windows Picture and Fax Viewer and can be worth a try:

  Reach... Start / run... and type
  (or copy and paste):

  regsvr32 /i shimgvw.dll

  (Yes, the space after the 2 and the)
  After the i is necessary)

  Press on... Come in...

  You should see a dialog box stating:
  DllRegisterServer and DllInstall in successful shimgvw.dll

• Vista System Restore does not work. I disable Norton Antivirus before you start the process. What can I do else?

  Vista System Restore does not work. I disable Norton Antivirus before you start the process. What can I do else?

  1. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  2 Malware will stop at the system restore:

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner