The ThinkPad T43 software of Configuration

Similar Questions

• Could not see the iSCSI target in the adapters iSCSI software under Configuration details page

  Detailed description:

  After you add the IP address of the iSCSI target in the target iSCSI dynamic discovery Tab names can be seen under static discovery. But, iSCSI target is not considered as adapters iSCSI software tab Configuration details page.

  This iSCSi target is already mounted as a data store VMFS5 with some VMS on an another ESX which is part of the different ESX cluster in the same center of work data.

  thinking the im network configuration

  You vm kernel ports configured correctly?

  you use VLAN? If so see if your config of vlan is correct

• Is it possible to use the AirPort Utility software to configure the newest Airport Extreme on Windows 10?

  I ask because it seems to be warnings on the download page, saying that it is for Windows 7 and does not work with all the extremes of the airport.

  Airport utility is obsolete... Apple is more support the AU for windows, it seems...

  The old utility can still install in win10, but it is not until the the version specification AC TC that require an airport of v6 or extreme utility... That is to say a Mac with Lion or later... or the utility version iOS ipad or iphone.

  With your "pen name" iOSJake... I don't know that you have a suitable ipad... Simply load the free utility for the apple store and config airport away.

• How to configure Windows to allow the parameters and software downloads to appear in system and standard user administrator?

  I HAD TO REINSTALL WINDOWS VISTA (SERVICE PACK 2) DUE TO A TROJAN HORSE THAT ATTACKED MY SYSTEM. I USED THE SUPPLIED RECOVERY DISCS SET WITH MY COMPUTER BECAUSE THE SOFTWARE HAS BEEN PRE-LOADED AND I HAVE NOT RECEIVED SOFTWARE FACTORY. WHEN I WAS SETTING UP USER ACCOUNTS, I CREATED THE ACCOUNT TO ADMINISTRATOR (WITH PASSWORD) AND A STANDARD USER ACCOUNT. WHEN I CHANGE THE SETTINGS IN MY COMPUTER IN EACH ACCOUNT, IT DOES NOT APPEAR THERE EITHER ACCOUNT. I DO CHANGES IN PARAMETERS OF EACH ACCOUNT INDIVIDUALLY. CAN I SET UP SO THAT WHEN I CHANGE THE SETTINGS, IT WILL DO THAT IN THE TWO ACCOUNTS? THANK YOU FOR YOUR HELP.

  original title; HOW TO CONFIGURE WINDOWS TO ALLOW THE SETTINGS AND SOFTWARE DOWNLOADS APPEAR IN ADMIN SYSTEM AND STANDARD USER?

  Most PC manufacturers who don't give you the disks give you a partition on your hard drive that contains the images of the disks so that you can burn yourself.  You should check out.

  When you say "change settings in both accounts' exactly what are the parameters what do you mean?  It is normal that many Windows settings to be on a per user basis.  For example. the desktop background is a 'definition' which is completely independent for each user.  You cannot set up a wallpaper for a user and hope that it displays desktop of another user.

• BlackBerry Smartphones Blackberry Desktop Software freezes with the message "Action Engine loading Configuration.

  I have Windows 7 Professional. My Outlook profile is stored on an Exchange Server and my Blackberry had previously beeng synchronization with Outlook in this configuration for nearly a year without problem.

  Recently, the software freezes the message 'Engine Action loading configuration' and is unrecoverable. I tried the following things to remedy the situation:

  (1) adjust the settings Organizer not to synchronize anything except the date & time. Still happens

  (2) remove all data from the device using Desktop software and try to resynchronize. Same problem

  (3) uninstall and reinstall Blackberry Desktop Software and try to sync with all of the original data and the empty deleted data Blackberry. The same problem.

  (4) tried to wipe off the full blackberry using Cmdr of JL, reinstalling the operating system. In this scenario, I can synchronize addresses, but once I sync calendar problems from ever happening and I can't ever sync it again (including later by deselecting the option of calendar.

  At that time I spent hours scouring Google for help and try the above items. This was a disaster for me because I rely on synchronization had given for work and have already from lack of things.

  I do not think there is something wrong with the Blackberry, because it works very well and works perfectly well after re - charging a fee, OS, etc.

  I tried to play with the balls of support, but because the software freezes before can synchronize calendar, there is nothing in the log that indicates if there is a file corrupted in the event calendar. Nothing won't change significantly in my calendar between synchronization worked and the day that he didn't.

  I tried searching the Blackberry forums and have found some info, but nothing useful. RIM does not provide phone numbers and support AT & T has continually demonstrated himself as worthless during my time with them.

  Are there resources left at all that I could try to move beyond this issue, don't waste any more time and be able to solve the problem?

  Thanks for reading and for any input that you are willing to offer.

  Although no one helped me with this I could help I put the steps that I followed down here so that if someone comes on this page of our friend Google, they will be able to try the same thing:

  I ran 'Fix' on the memory card in the Blackberry
  Ran CCleaner on my PC to clean the registry
  Reset synchronization in the Desktop Manager settings

  Finally finally I'm the synchronization again.

• Removes the component of software without NI MAX

  Is there a way to remove a software component on a real-time target without using MAX or the configuration of the system API (and not all format)? The web-based software management feature only seems to list the installed components, does not allow changes that I can see (?).

  More precisely, we have a NI Linux RT target with the installed Legacy FTP support, and now we want to remove to prevent anonymous access to the device (unlike other target OSs the FTP server on Linux RT only supports anonymous access in order to add a password is not an option). We might be able to open a session using PuTTY for example, then maybe there is a command change that we could use to at least disable the FTP server?

  https://decibel.NI.com/content/message/105524#105524

• Help the Thinkpad x131e fingerprint reader problems

  Hi, I have an amd thinkpad model x131e 3372 runnning windows 7 and I have problems with the ThinkVantage fingerprint software. Whenever I try to register a fingerprint, I get these errors:

  

  I really need help. Its driving me crazy that I am not able to use my fingerprint to unlock my pc or check the passwords.

  Any suggestions are appreciated.

  I also have the x131e model 33722. It does not come with a fingerprint sensor, then any attempt to use the software would result in such a mistake. You might be confusing the middle button of the mouse with a fingerprint sensor.

• the exception unknown software exception (0 x 0000409) occurred in the application at location 0x0100bece.

  I have the message "the exception unknown software exception (0 x 0000409) occurred in the application at location 0x0100bece." shown often on my windows. May I know what is the cause and how to fix?

  Hello

  You have made any changes to your computer recently?

  I suggest you to follow the steps and check if it helps.

  Method 1:

  Step 1: Start the computer in safe mode and check if it helps.

  A description of the options to start in Windows XP Mode

  Step 2: PEd a clean boot and then check to see if it helps.

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure you perform the steps in How to configure Windows to use a Normal startup state to start your computer normally.

  Method 2: Run check file system (CFS) analyses and checks to see if it helps.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  I hope this helps.

• The exception exception software unknown 0xc06d007e has occurred in the application at the 0x7c812afb locaton

  Original title: error TampMon.exc

  I get the following:

  TampMon.exc

  The exception exception software unknown 0xc06d007e has occurred in the application at the 0x7c812afb locaton.  Can you get it someone please let me know what it is.

  Thank you

  Judy

  Hi Judy,.

  1. when exactly you get the error message?
  2. don't you make changes before the show?

  Looks like some programs non-Microsoft is causing this error. We recommend you to check which program is causing this issue and remove it.
  see How to configure Windows XP to start in a "clean boot" State .
  b. If you do not see the message error, then from the item, follow method 1 and method 2 to find out if any program is causing the problem.
  c. Once you have found the culprit which is the program that is causing the problem, then uninstall it or reinstall once again to correct errors.

  Note: Article, remember to follow 'steps to configure Windows to use a Normal startup state. "

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When restarting Thinkpad T43 running XP Pro, error "Thinkpad Fn + F5 has encountered a problem and needs to close."

  I'm using a Thinkpad T43 with XP Pro. When you're cycling on it always shows a message of "Thinkpad Fn + F5 has encountered a problem and needs to close. We are sorry for the inconvenience. Please tell this problem to Microsoft. "I hit send and continue switch upwards and everything works fine, including the wireless. Is it possible to get rid of this annoying little window on start up? Thanks for any help.

  * original title - Fn + F5 false error message *.

  Hi and thanks for the answer-

  When I woke up this morning it became me to the simple thing instead of all things "a simple" I had tried to do. IBM keyboard shortcut RELOADED drivers and the problem disappeared. Thank you very much for you reply and suggestions.

• IBM ThinkPad T43: Rescue and Recovery question

  Hello

  I have an IBM ThinkPad T43. The Rescue and Recovery program opens whenever I turn on my laptop after a failed attempt to restore my laptop to factory settings. I cannot even connect on Windows, because the Rescue and Recovery program opens upwards immediately after I turned on the power. I tried to restore my system to factory settings using the program and the product recovery disc I bought at Lenovo, in the hope of resolving the issue, but every time I'm prompt "IBM could not restore your system.

  How can I stop Rescue and Recovery of the opening and resume with normal startup in Windows? What should I do so that I am able to restore my laptop to factory settings?

  Please help if you have any suggestions. I appreciate it greatly! Thank you!

  You can use this TI pc doc disk bootable http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-56222 its been a long time since I used it, but I think that in the top right there is a tab that says utilities or something like that you can wipe the HARD drive from there as I've always used the quick option worked for me

• It is possible to reinstall Windows 7 using the Windows 10 software, in which I would buy and use?

  Original title: problem of Installation of Windows 7.

  Hello

  Recently, my computer has not been doing any internet access and I thought to reinstall Windows 7.

  But I can't do that because I lost the disc and key product :( (shock)

  So I thought I would buy a new one, but with Windows 10.

  So I have two questions:

  It is possible to reinstall Windows 7 using the Windows 10 software, in which I would buy and use?

  If I decide to buy online, some say it's downloadable, how can I reinstall it without using a CD?

  Hello

  Recently, my computer has not been doing any internet access and I thought to reinstall Windows 7.

  But I can't do that because I lost the disc and key product :( (shock)

  So I thought I would buy a new one, but with Windows 10.

  So I have two questions:

  It is possible to reinstall Windows 7 using the Windows 10 software, in which I would buy and use?

  No, Windows 7 and Windows 10 require unique product keys and their respective installation files.

  If I decide to buy online, some say it's downloadable, how can I reinstall it without using a CD?

  Windows 10 is available as a digital download:

  Buy Windows 10 family/professional edition

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• BlackBerry Torch 9800 smartphone failing to connect to the Blackberry Desktop software

  Recently I seem to get a continuous "Connection" message to BBDTS. Have you tried the following:

  -the latest version of the BBDTS software.

  -restarted the pc (Win7x64)

  -restart the blackberry

  -tried a different usb port

  Nothing has worked. It seems that the blackberry connects to the pc OK

  Any ideas on how to get a connection established

  Thank you

  Hello!

  Here is a list of troubleshooting items... I hope that something will be useful:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-Desktop-software/tips-for-getting-BlackBerry-deskt...
  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB28457 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone because of administrative permissions
  • KB28458 BlackBerry Desktop Software is unable to detect the BlackBerry smartphone when user account control is enabled
  • KB28459 BlackBerry Desktop Software is unable to detect the BlackBerry smartphone when a full version of Roxio® Media Manager is installed
  • KB28456 BlackBerry Desktop Software is unable to detect the smart phone BlackBerry when the USB selective suspend setting is enabled
  • KB28444 The BlackBerry smartphone is not detected by the BlackBerry Desktop Software, when connected by USB to a USB hub or a docking station
  • KB28443 BlackBerry Desktop Software cannot detect the BlackBerry smartphone when connected via USB
  • KB02640 Troubleshooting USB connections
  • KB15486 Top 10 smartphone BlackBerry and BlackBerry Desktop Manager troubleshooting tips
  • KB00125 BlackBerry Desktop Software cannot detect the BlackBerry smartphone
  • KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
  • KB00019 PIN code not displayed in BlackBerry Desktop Redirector
  • KB10938 "Current USB charge is insufficient," appears on the BlackBerry smartphone
  • KB01451 How to enable Sync advanced logging if a wired synchronization fails
  • KB19717 The BlackBerry smartphone is not detected as a USB mass storage device when connected to a computer
  • KB16310 Media Transfer Protocol and the BlackBerry Storm smartphone
  • http://supportforums.BlackBerry.com/T5/BlackBerry-Desktop-Software/Desktop-Manager-quot-disconnected...

  In addition, make sure you use only the root USB ports... without hubs (sometimes the front-end ports are hubs... use a rear USB port). And don't forget to try to disable the USB power management in the configuration of your system (Device Manager).

  Check also on the incompatible software... it was reported that NTI Shadow Ninja & software can cause a conflict; Remove and reinstall the desktop software BB allows to install correctly.

  My apologies in advance if this is redundant - there is no way to be sure that if you have already seen and tried these. Also apologies if all are not currently available... RIM takes their monte and descends at will as they revise things.

  I hope that something it is useful!

  See you soon!

• Unable to start the Service for the Protection of software

  I am running Windows RT on a Lenovo ZTE K3011W-F (aka Lynx). This device has been used by two people before, and so was a previous configuration. I did a factory reset on the device, except Windows now refuses to turn on, so I can't update/customize/upgrade, etc.. It is not immediately ban, but eventually it can be seen as harmful to the security of the system.

  I traced the symptoms to what seems to be a reasonable explanation, that is, the Service for the Protection of software is not running, and when he was invited to run, it returns an error indicating: error 5: access is denied.

  When I go to activate Windows Sidebar "Change PC settings", I saw a button that says active, but it displays a message that says: "not found Activation Error Description.

  Hello

  We will analyze and identify the cause of the problem. The steps described here.

  You may need to correct the time settings and the language.

  a. drag from the right edge of the screen and tap or click settings.

  (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click settings.)

  b. press or click change PC settingsand then tap or click the time and language.

  c. tap or click to change the set duration automatically off.
  d. under change date and time, press or click change, type or select the correct date and time for your current time zone and then press on change.
  e. tap or click to turn on the time is automatically set back to.

  f. install the latest updates by Windows updates.

  If the problem persists, you can consult this article for more information. You may need to activate the phone using the steps described in the article.

  Get help with activation errors

  http://Windows.Microsoft.com/en-AU/Windows-8/activation-errors

  Hope this information helps. Response with status so that we can help you.

• ThinkPad T43 BIOS

  Hello everyone, I am new on this site. The reason why I joined is to find some information on the IBM Thinkpad T43. I have a chance to purchase an and I have a question to which I'm not sure. The person who sells the phone tells me that the BIOS is locked. I've never heard talk about this can someone help me because I don't want to buy a laptop which will be of no use to me and the money. Help, please!   Thank you TDBNAZ

  Welcome to the forum!

  Do not buy a machine with BIOS locked, since you will have to exchange the motherboard in order to to use correctly.

  Good luck.