The thread of shame-help!
Here goes... I accidentally tripped over it my helmet it ripping off the computer. I am no longer able to hold the plug into the socket, and I hear what looks like screws moving around the front of the computer. I lived like this for a few months, not be able to use the headphones. Today, my computer speakers stopped working all together. Obviously, I see that they work very well in the computer, nothing is mute, but not his at all coming from the computer.
I watched a video on the opening of my beautiful aspires. That freaked me out completely. I will only mine!
So now, I'm here because I don't have a warranty.
Suggestions welcome!
Heidi
Try a local computer repair shop.
Sort
Tags: Acer
Similar Questions
-
Windows Update is broken - none of the threads seem to help
Update Windows 7 is broken, stuck at 0%. No driver update does not work either, they just hang out.
I tried all the other patches of these bodies, including:
-System Update Readiness Tool (doesn't work, everything hangs until force them to leave) (https://www.microsoft.com/en-us/download/details.aspx?id=20858)
-FixIt just blocks (https://support.microsoft.com/en-us/kb/971058)
-All installation services are already running
-a ran all the checks of the drive, past very well.
-No malware or viruses as verified by malwarebytes and AVG.
Basically, even the diagnostics steps do not work, and these are measures which seem to work for others. Thoughts on what to try?
My Lenovo Thinkpad (P70) came with McAfee, which I have since deleted after the AVG trial expired and put in its place.
The hanging of the facilities after the setting never stops 'Find updates' automatic updates and reboot. If your windows installation is as recent as day April patch, try to repair the search of updated by installing the KB3153199 in advance.
Best regards, VZ
-
How to manage the threads for TCP communication?
Hello
I have a project to control two separate applications (C++ and LabView) and two of them are implemented as server. Another client program (C++) is used to control applications. Communication between them are implemented using TCP socket. The client program sends the message to start or stop tasks on servers. The client program also sends time (HH) with the message start and end to determine when to start or stop.
Application in C++ (server): Listening to the request for the connection and when gets one, it creates a thread of communication allowing to manage this and listen again to another connection. Communication wire crossing of handles and messages when it receives a start or a stop message, it creates a thread of timer with the received time to trigger a task at the time specified. And after that he expects the client message. So, here, when the thread (communication, timer) is necessary, it is created.
In LabView (server): I tried to create the same as the C++ server. But, in manual of LabView and other discussions of the forum, I got that LabView is multithreaded and it can be done with the help of the loop independent. So, I had to create four loops in a diagram:
1. wait the new connection
2 manage the communication for the already received connection
3. start the timer
4 stop the timer
and they are executed at the beginning of execution and communication between them are managed using local variables. But, 2, 3 and 4th loop can handle only one connection and it can handle another if the current is closed. The C++ application can handle multiple connections by creating the thread when it is necessary, but not at the beginning of the application.
Is there a better way to implement this in LabView?
Is it possible to manage multiple connections and create the diagram node/block (such as a wire) dynamically as C++?
Thank you.
There are several ways to do so in modern LabVIEW and you should probably seek the Finder example for TCP examples. The classic is to transfer the refnum of connecting the listening loop in a communications loop that adds to an array of login credentials and then constantly iterates through this array to make the communication. He works on LabVIEW 4.0 perfectly for me even for applications with basic HTTP communication protocol. But you must make sure that the communication for a connection is not delaying his work for reasons that would delay the handling of other connections too, because they are really of course worked on sequentially. If you encounter an error, the connection ID is closed and removed from the table.
The other is that create you a VI that makes your entire communication and ends on an error or when the order quite. Make this reentrant VI and then launch it through VI server as the instance home, passing the refnum of newly received connection form the listening loop. Then use the method to Run let start and operate as an independent thread.
For all these, you should be able to find an example in the example Finder when searching for TCP.
-
SetCtrlVal used during the Thread function works causes memory leaks
I am writing a program that works if... Or not work if... - see the next lines... :-)...
The program includes a section, mostly GUI - and User Interaction.
The other part is a DLL. In the DLL we readings on an external consultant controller RS232. Sometimes the controller card needs (called how much) time and this time must pass then the result can be read card controller... and so on...
Blocking is not GUI-user-program for the expectation of the return value of the DLL functions (which need a few seconds to be finished) I start a thread in the DLL with
CmtScheduleThreadPoolFunction (DEFAULT_THREAD_POOL_HANDLE, THREAD_FunctionX, & tmpTFP, NULL);
with "tmpTFP" as an instance of type "TYPE_THREAD_FUNCTION_PARAMETERS":
typedef struct
{
//
int IntVal1; // 1. Integer-Wert
int IntVal2; // 2. Integer-Wert
int IntVal3; // 3. Integer-Wert
int IntVal4; // 4. Integer-Wert
int IntVal5; // 5. Integer-Wert
//
int IntBuffer1 [32]; // 1. Integer-buffer (aktuell genugt einer)
//
Double DblVal1; // 1. Double-value
Double DblVal2; // 2. Double-value
Double DblVal3; // 3. Double-value
Double DblVal4; // 4. Double-value
Double DblVal5; // 5. Double-value
//
char CharVal1; // 1. (Single)- Tank-Wert
char CharVal2; // 2. (Single)- Tank-Wert
char CharVal3; // 3. (Single)- Tank-Wert
char CharVal4; // 4. (Single)- Tank-Wert
char CharVal5; // 5. (Single)- Tank-Wert
//
char CharBuffer1 [1024]; // 1. Char buffer (akutell einer genugt)
//
} TYPE_THREAD_FUNCTION_PARAMETERS;In the GUI-user program - I get fast by default-return value of the thread start function.
Then I asked the DLL (some global state variables are used for this) when it is finished.
According to the map-controller (RS232) contacted the waiting time depends on the 'mood' of the controller card.
In the DLL-mark of the GUI-user-program routine now everything works fine - without using "SetCtrlVal!"
In my GUI, there is a text box of the info/comment for messages. If I do a few outputs user using 'SetCtrlVal' I always errors, caused by the false "TYPE_THREAD_FUNCTION_PARAMETERS"-values in the service of thread. "» If I set a breakpoint at the beginning thread-function I see mostly erroneous values in my transfer structure variables. If I put a breakpoint in the thread-function-calling 'CmtScheduleThreadPoolFunction (...)"and at the beginning of the thread values are (mostly) correct!
I tried several and different things - but:
If I ONLY (!) Commenting on the (!) of a line with "SetCtrlVal", the program works, all States are asked out of the DLL.
If I replace the "SetCtrlVal" with a written record-file function clean everything works fine and after completing the program I can look at the log file and see all the user information. BUT with 'SetCtrlVal' instead or set or (...) it does not work.
My description is maybe not entirely clear, but believe me: only ONE line the «SetCtrlVal "line - should be commented out to let the program run properly!»
Because if the line "SetCtrlVal"is program-user-GUI, after the call to the thread in the DLL, the DLL-memory seems to be corrupted by the call "SetCtrlVal" in the user-GUI program.»
Best regards
F.
There may be a problem in your structure that your variable is set.
You said that, after the address of the variable in the thread function the appellant one ends. Now, as you can read help each value passed in parameter threadFunctionData of the layed function must point to an area of memory that persist when the fuction is running: If your variable is defined at the level of the functions it is not valid when the thread runs since the appellant finished and released its local memory.
Your approach with a global variable is a valid alternative, but if it is the solution, you will find data passed to the thread function must be valid for all his life.
-
Try to install the Epson printer and scan - error msg application not compatible escndv is not compatible - I downloaded the drivers to day-help!
[Moved from the community centre of Participation]
Try to install the Epson printer and scan - error msg application not compatible escndv is not compatible - I downloaded the drivers to day-help!
[Moved from the community centre of Participation]
Hello
What version of Windows are you using?
What is the model of the printer?
See related thread
Have you tried to install the drivers using the Compatibility Mode?
-
LabVIEW built of DLL in an application multi-threaded C++, need help!
I'm working on a software application which is developed mainly in C++. There is a component of this larger application, however, develop in LabVIEW (for several reasons that I dive in here). This LabVIEW code is therefore run in a C++ wrapper class that calls a built DLLS LabVIEW.
All this was fine and dandy, until we decided to multi-threaded, our C++ application for an increase in performance. Accordingly, the LabVIEW DLL now is called from multiple threads simultaneously. While this works on a functional level, it seems to create a bottleneck. All my tests, it is resource locking occurs, such that only one thread has access to the .dll at a time. If I do the .vi used to define the dll as a non-reentrant function prototype so it's what we see. For example, say we have 3 sons all calling the same .dll method call. Thread 1, 2, 3 and all call the .dll file in a few milliseconds of each other. Thread 1 has completed the call .dll after X milliseconds. Thread 2 has finished the .dll call after 2 X milliseconds, and wire 3 full after 3 x milliseconds.
Now, changing the vi home and runs the same test, we see wire 1, 2, 3 and all end them the call of .dll in 3 x milliseconds. While the fact that they are now the same amount of time to complete you would lead to believe they are spend at the same time, the fact that it takes 3 x milliseconds as opposed to X milliseconds means that they are not.
Has anyone ever dealt with these issues before? Is it possible to play with the "delivery system" for the vi will have an effect? What happens if .dll methods while remaining attached to the same .dll are called from different threads? Same behavior? Is it a lost cause? Is there any way to make the code in a DLL only built LabVIEW run in two different threads at the same? What I understand is easily achievable with a normal (non - built LV) .dll.
Please, if anyone has any advice in this area, let me know!
Much appreciated,
Jesse HurdusHi jhurdus,
I know that you are working with an engineer OR this question, but I wanted to post a reply to one of your last questions.
When you use the function node library call in LabVIEW, there is the possibility to select 'Run in the user interface thread' or 'run in any thread '. This option, according to the help file for LabVIEW (dialog box call library functions), allows the developer to pass thread library function node call from the (default) user interface thread to the thread that the VI is running. Additional details of when you want to switch the thread of execution are in the help file.
Kevin S.
Technical sales engineer
National Instruments
-
How to extend my C drive volume in Windows 7, so that the disc I want to merge in drive C is not adjacent to the C drive, please help
Jackin salvation,
Welcome to the Microsoft Answers community.
When resizing of volumes in Windows7, you must be aware of the following criteria:
- Only you have the possibility to reduce or enlarge NTFS or RAW (unformatted) partition using Windows 7 tools.
- When you shrink a partition, files not movable as a page file or a shadow storage area are not resettled. This is why you cannot reduce the size of the Windows beyond volume where these types of files. If you need to reduce the volume, you will need to remove, move or delete the page file or the shadow first storage area, and then reduce the volume and then add the page file or shadow storage on the disk area.
- If enough bad clusters are found on the disk partition will not shrink.
- You must be logged on to an administrator account in order to resize Windows Volumes in windows 7.
Windows 7 Partitions or Volumes of shrinkage
This section shows must shrink a Windows volume or partition. To do this, we must open the Windows 7 disk management tool. The following steps will guide you in this process.
- Click the button on the Start Menu in the bottom left of your desktop , and then click the Control Panel menu option.
- When Control Panel opens, click on system and Maintenance category.
- When opens in system and Maintenance category, scroll down and click on Administrative Tools.
- Double-click the computer management icon. The console of the computer management will now open. Down, you will see a category called storage and under this category will be the disk management icon, as shown below.
- Click on the disk management icon, and you will now be in the disk management utility as shown in the figure below. This utility you can see all the partitions on your computer and format, delete, create, develop or resize them. For this tutorial, I'm going to resize the partition E: of 16 GB so that when completed, there is a 8 GB partition and provides another 8 GB of free space I can use for other purposes.
- To shrink the partition, just click with the right button on the partition that you want to work with and select reduce . In this example, I click right on the E: partition and in the menu that appears, I select shrink.
- A screen similar to the one below appears. This screen indicates the size of the current partition you, how you can reduce it to a field where you can enter a specific amount to reduce, and then how big partition will be once it shrinks. By windows 7 default enters the maximum amount that you can reduce the volume, but if you want to change this amount, do so by entering the amount in MB in the enter the amount of space to shrink in MB: field. When you are satisfied with how windows 7 will shrink the partition, click the minimize button.
- Once windows 7 is complete decreases the volume, you will be in the disk management screen, but now the partition size will be the size you requested as shown below.
Now that you have reduced the size of your volume of Windows, you can close the computer management
console.You have now finished reducing your score and you have the extra space available for use as required.
Windows 7 Partitions or Volumes extension
This section shows that you must extend a Windows volume. To do this, we must open the tool of disk management where we can resize our volumes. The following steps will guide you in this process.
- Click the button on the Start Menu in the bottom left of your desktop, and then click the Control Panel menu option.
- When Control Panel opens, click on system and Maintenance category.
- When opens in system and Maintenance category, scroll down and click on Administrative Tools.
- Double-click the computer management icon. The computer management console will now open. Down, you will see a category called storage and under this category will be the disk management icon, as shown below.
- Click on the disk management icon, and you will now be in the disk management utility as shown in the figure below. This utility you can see all the partitions on your computer and format, delete, create, develop or resize them. For this tutorial, I'll extend the E: partition so that it uses the rest of the available space on the disc 1.
- To extend the partition, he just click right-click on the partition that you want to work with, and then select the Extend option. In this example, I click right on the E: partition and in the menu that appears, select Extend.
- A wizard appears as shown below. Press the Next button to continue.
- A new screen, shown below, is displayed allowing you to select the free space available on your local hard disks that you can use to extend the space of the selected partition. It is important to note that Windows 7 allows you to extend a volume using free space on the same drive as well as the other disks. I strongly suggest that you do not extend a volume on a disk with free space of the other. It is because if one of the disks has a hardware failure, then all data on this volume will be removed. Rather just to use the free space on a drive that contains the volume you extend
.
As discussed in step 5, for this tutorial we are going to extend my 8 GB partition (drive E :) to the total size of disk 1 using all the available space. As disk 1 is only available free space on my computer, windows 7 automatically select as shown in the image above and use the maximum amount available to extend the partition. If there were other drives with free space that they have shown during the selection available . If you want to extend the volume to a lower amount you can change in the Select the amount of space in MB: field. In the contrary case, press us the button Next .
- You will be now be presented with a confirmation screen. If you are sure you want to extend the volume, press the Finish button. Otherwise, press the back button to make changes or the Cancel button to cancel this operation.
- Once Windows 7 completed to extend the volume, you will be on the screen disk management, where you can see the amount that you have extended with the new size. An example of this is shown below.
At this point, you can close the Management window of the computer that your task is completed.
Hope this information is useful.
Let me know if it worked.
Thank you, and in what concerns:
Umesh P - Microsoft Support
Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.
-
Not closed after the thread.sleep call dialog box
Hello
I am display the dialog box and then call thread.sleep (5000), after I called two alerts more dialogue. The problem is when it displays the first dialogue onclick of the button ok its not be closed and its second dialog box open automatically. you have no idea.
Code example
try {}
Dialog.Alert ("HI");
business logic
}
catch
{
Thread.Sleep (3000);
Dialog.Alert ("Hello");
}
After the display "Hi", I'm not able to close this dialog box. I tried to put the Thread.sleep inside DMT invlodLater(), no luck
Any idea?
Not sure what you mean by there.
If you want to encode a thread. Sleep (), or waiting for a similar block of code, you must be on the thread of events. And you can not do without starting another Thread.
Maybe this will help:
http://supportforums.BlackBerry.com/T5/Java-development/what-is-the-event-thread/Ta-p/446865
-
Call Dialog.ask in the Thread Run method
"in I want to call Dialog.alert and using following code but its exception to throw the wire.
"Exception occurs java.lang.RuntimeException: pushModalScreen called by a thread of non-event."
synchronized (Application.getEventLock ())
{
if (Dialog.ask ("catalog is obsolete. You want to keep it? ", choices, select, select [0])(==1)"
{
Run the required functionality
}
}
pls help me
I keep saying this, so forgive me of repeating myself, but:
synchronized (Application.getEventLock ()) {}
should only be used when nothing else will work for you or you make a very simple, very fast UI update.
A Dialog.ask is not very fast!
In this case, you have several options, but the most obvious solution is to ask the question before starting the Thread. So, if that is your treatment
Thread catUpdateThread = new Thread() {}
public void run() {}
Dialog.ask (...)
Other treatments
}
}
catUpdateThread.start ();
What should do the same and works OK. :
UiApplication.getUiApplication.invokelater (new Runnable() {}
public void run() {}
Dialog.ask (...)
If (result == Yes) {}
Thread catUpdateThread =...;
catUpdateThread... Start();
}
}
});
-
HELLO developers,
ublic class Timer extends Thread { static boolean isMsgSentMode =true; static int timerCount; static int count=0; int i = 10; public void run(){ try{ while(isMsgSentMode){ if(i==-1) { //TODO // Add the code here // implement the operation needed when the counter reaches to 0 // sending the query status command only once if(count==0) { BluetoothSerialPortScreen.queryStatusCmd(); } safeSetLabelText(MsgCenter.SOS_MESSAGE_SEND); isMsgSentMode=true; // when count greater than 2 it will come out of the loop if(count>2) { isMsgSentMode=false; } count ++; //i=10; // resetting it to -1 } else { isMsgSentMode=false; } } else { // for testing purpose if(!(QueryStatusEntity.getmCurrentModeOfOperation()==3)) { System.out.println("Thread is working "+i); safeSetLabelText("SOS Will be send in"+ " "+ i+" "+"seconds"); Thread.sleep(1000); } else { isMsgSentMode=false; } i--; } } } catch(Exception e){ System.out.println("Exception has been occured "+e.getMessage()); } } /** * Used to Modify the sosmessagesendLabelField called from the Thread * * @param text * @return LabelField */ public final void safeSetLabelText( String text) { synchronized (UiApplication.getApplication().getEventLock()) { SosModeScreen._sosmessagesendLabelField.setText(text); // based on the text type the setpadding is being changed if(text.equalsIgnoreCase(MsgCenter.SOS_MESSAGE_SEND)) { SosModeScreen._sosmessagesendLabelField.setPadding(20, 0, 0, SpotConstants.WIDTH_BY_FOUR); } else { SosModeScreen._sosmessagesendLabelField.setPadding(20, 0, 0, SpotConstants.WIDTH_BY_SIX ); } } } /** * For stoping the thread programtically */ public synchronized static void stop() { isMsgSentMode=false; } /** * For starting the thread programtically */ public synchronized static void starts() { isMsgSentMode=true; }I've set up a thread. that works very well for me, but the problem is that I can't stop this inorder to stop the current thread form execeuting I created a
public synchronized static void stop() { isMsgSentMode=false; }Timer.stop using (), I call it but is still the thread is running in the background, need help for this
Thank you
sujithRavindran
There is no sure method to end a thread.
usually you put into a Boolean variable that you can change from the outside.
If (! stop)-> stop process set to true and the termination of the thread.
-
loading windows 7 on hp pavilion a810n feasibility - need to reply to the questions in the thread
I got 1 response to my initial questions but I also followed questions that I have not received help with. Also, here is the latest news. I updated my old hp pavilion a810n 7 Edition windows xp home premium today. Device Manager shows yellow exclamation points on ethernet controller and multimedia audio controller. I ensure that I can't connect to internet because of these problems. These two are fixed if I get some new material. I gave the link, but I'm confused by all the different types of shows. Please look at the thread and help me determine what I need and what should be the specifications so I can order the good part. I'm new to this so any help would be greatly appreciated.
Hello:
I think you can use this audio driver.
Audio: Accept the contract, download, unzip and install the driver first on the list.
Ethernet: Try the file 6th on the list.
-
I currently own Adobe Creative Suite 5 Master Collection. My computer crashed and I was unable to disable the program. Please help me to reinstall the programs, given that I have exceeded the download due to problems with my computer. Thank you
Hello
Please see the thread: https://forums.adobe.com/thread/2028937?start=0&tstart=0
Kind regards
Shelly
-
After you disable CS6 license on the old iMac, SN license won't work on the new iMac, please help
Have a creative suite standard CS6, get rid of the old mac now. Had disabled the SN on old Mac. When I install the suite on the new iMac, it does not accept the SN.
Only got 7 days lying around, please help. Thank you!
Jerry
Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html
-http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html
- and http://forums.adobe.com/thread/1038761
IF El Capitan Mac read below
CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan
-which means you are trying to use CS6 and earlier at YOUR risk of having problems
-You can get CS6 and previous programs to install and run, or you can not (some do, some don't)
-IF not, Details of the message from the error messages and a person may be able to help (just not Adobe)
Maybe it's a fake because of Mac El Capitan and OLD programs error
This information is a MUST to install old programs on Mac El Capitan
-You can't get the same error message, but here are some links that CAN help with old programs
-Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help
Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)
-also a TEMPORARY security change https://forums.adobe.com/thread/2039319
-the guardian https://support.apple.com/en-au/HT202491
-
My computer crashed and I reinstall first elements 7, but it will not recognize my serial number there are two on the CD case please help
When you ask a question you will need to provide some basic information
Mac or Windows and EXACTLY what version of the operating system?
Recent Mac AND Windows operating systems have been known to cause problems "weird."
Lost information - response #1 in https://forums.adobe.com/thread/2008767
Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html
-http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html
-
CS6 inDesign crashing on the opening, works on the different user account, help?
Hello!
I use InDesign everyday, had my Macbook since September and have had no problems with the opening of the program at all until about 2 weeks ago. It appears with the graphics of opening with all the license information, and 5 seconds later, a window opens saying "InDesign quit unexpectedly", as well as loads of text on the threads, frames and the rest. (A copy of the text is available to InDesign Crash Info - Pastebin.com , in case where anyone can somehow choose something from that!)
I tried to reset all my preferences and reinstall all of the CS6. I also had a problem with the fonts in the past, so I have deleted all my additional fonts and just now the default fonts library. The only way I could make it work is by setting up a different user account, and now it opens properly, but only when using this account. It's just a pain the * having to keep switching between user accounts all the time! I didn't know if there would be a quick solution to this, rather than having to transfer all my files, preferences etc. from one account to another and basically a new account from scratch.
Any help would be great appreciated.
Thank you
According to the accident report, you must always update InDesign to the latest patch (8.0.2 for a perpetual license, 8.1 for the subscription).
If that alone is not enough, delete or rename the files of two preference from your old account (see replace your preferences for where to find them) and copy the same folders on the new account.
Maybe you are looking for
-
When I type for example aaaaaaaaaaaa what follows is displayed asdfghjkl; ' '-the characters are different each time. This just started happening today. IE and Chrome doesn't and characters appear when they are typed. I uninstalled and reinstalled Fi
-
The menu will not descend to the bottom when I want to insert symbols
The drop down menu disappeared when I want to insert symbols?
-
I got this pop up on my computer last night so that in Safari. Should I worry or is it fake? Thank you!
-
It is how works before default browser. So if I change to Firefox, it's a question for me to work without extra clicks...
-
4 - 1025TU envy: how to INSTALL Windows 7 on HP Envy 1025TU expenses 4
I'm sorry if my question published or wrong thread & wrong language... Model: HP ENVY 4 1025TU320 GB hard drive4 GB OF RAMThe operating system, it was delivered is Windows 7 / 64 bit / Home BasicIf I want to install the new copy of Windows 7 32/64-bi