The Thunderbird migration help article has an error.
Path of the Thunderbird to a new Thunderbird why may fail.
It's the path of the folder on my computer for the Thunderbird e-mail files:
C:\Users\Stan\AppData\Roaming\Thunderbird\Profiles\iq9rzk1o.default\Mail\pop.att.yahoo.com\Inbox
In this Thunderbird email folder:
Are these folders: Crash Reports A long list of very tiny "Install Time" text files. Profiles Folders and files holding all the Thunderbird user's email and preferences. And these files: Registry.dat A very small file with perhaps some entries for installation in the Registry. Profiles.ini A very small text file containing only this: [General] StartWithLastProfile=1 [Profile0] Name=default IsRelative=1 Path=Profiles/iq9rzk1o.default <--- Note this.
If this path entry is not exactly the same as the following the Thunderbird, Thunderbird folder path does not start.
Error message: "Your Thunderbird profile cannot be loaded. It may be missing or inaccessible."
Thus, when copy/move in the new computer old computer, this file Profiles.ini Thunderbird must be included.
To do that copy/move the entire Thunderbird folder. NOT just the Profiles folder, as that Help article describes.
This Help article must therefore correct: moving a profile [because it omits.]
See: https://support.mozilla.org/en-US/kb/profiles-tb#w_moving-a-profile
StanLogue said
My original compliant remains: where in Mozilla is a simple method to make backups of the user complete electronic collection (every day)? A clone that can be restored or moved into its new / other computer.
(Don't see any need to discuss profiles).Stan
[My first computer: whirlpool II]
https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/
Tags: Thunderbird
Similar Questions
-
Campus solution 9.0: the process of demographic data has an error
People,
Hello. I'm working on 9.0 Solution on a University Campus. I'm working on the module of Community Campus. I face a problem like below:
Campus Community > personal information > add/update a person
I can type in all the information for a person successfully and save it with success. But when the search it returns nothing. This is because the security of access to demographic data is not granted to the user. So, I put security as below:
Step 1:
Set Up AWAR > Security > Secure Student Administration > permissions list > access to demographics: I select the EOEI9200 allow for the PS user list
Step 2:
Set Up AWAR > Security > Secure Student Administration > process > access to demographics: the process to initialize the list of permissions for the user PS process program is the Application Engine. The process name is MSK_CFG. The process is not successful and returns an error as below:
Table or view does not exist. Has no SQL statement: Truncate Table USER.PS_MSK_CFG_TA04.
I checked the table PS_MSK_CFG_TA04 to SQL > and application designer. There is no Table or view PS_MSK_CFG_TA04.
Because the MSK_CFG process may not run correctly, the list of permissions for user PS is not initialized and data demographic is not back to the user PS when "search".
My questions are:
First of all, how to run the MSK_CFG process with success to the ACSS Set Up > Security > Secure Student Administration > process > access to population data?
Second, why is the PS_MSK_CFG_TA04 table is not? How to solve the problem?
Thanks in advance.
1 these are temporary tables. A temporary table can have multiple instances at the database level, although they are represented as a single object in the App Designer. I suggest that read you on this subject in PeopleBooks:
Understanding of temporary Tables
2. Yes. But this is another instance. Temporary tables are used for the treatment in the engines of the App at the same time.
3. do not know what has happened with your application during your upgrade of tent, but it seems that the document I posted previously has some information about the missing tables. You were previously on Campus Solutions ever? You try to install CS for the first time? I suggest that you trigger a SR with Oracle also, so that they can better help and identify your specific problems to update/install.
-
Currently at the customer help v6.5 with Excel2003.
User has problems sporadic drilling on activesheet connected in Excel.
I checked his security & there is no problem.
Its connect/connection works very well; He can see all the apps in the drop-down lists and communicate with them.
This process has worked well for him last month.
Now, it gets the error message 1020012: 'maximum number of columns [0] exceeded' when it's just double-click on an empty worksheet.
It gets the error message 1020012: 'maximum number of columns [256] exceeded' if he uses a spreadsheet to the format that worked well last month.
I am able to connect and do it very well. It seems to be specific to a client.
It is located about 600 miles of our server and my position.
Are there settings on the client or the server, we can define which would solve this problem?
Suggestions on what to check on the client or server or LAN?
Has anyone encountered this error before? If so, what do you have to solve the problem?
Thanks in advance for any help! DJI have seen this before which a user has installed, or HE pushed down, another version of the add-in on top of the existing version (i.e. without uninstalling the existing version). I have also seen this error when a user has installed app manager on their PC.
-
I'm new to the pl/sql help me solve this error
the syntax to create the details of table and home
create table House (what VARCHAR2 (25), M_NAME VARCHAR2 (25), C_NAME VARCHAR2 (25));
create table House (what VARCHAR2 (25), M_NAME VARCHAR2 (25), C_NAME VARCHAR2 (25));
relaxation program
CREATE OR REPLACE TRIGGER HOME_BEFORE_DELETE
BEFORE INSERTING
HOMEPAGE
FOR EACH LINE
DECLARE
V_USERNAME VARCHAR2 (25);
BEGIN
SELECT THE USER IN V_USERNAME FROM DUAL;
INSERT INTO HOME_DETAILS
(WHAT, M_NAME, C_NAME)
values
(: old.) WHAT,.
: old. M_NAME,
: old. C_NAME, V_USERNAME);
END
When running it shows
ORA-24344: success with compilation error
Hello
Insertion of details home table is incorrect.You have specified only 3 columns , M_NAME, C_NAME in the column list and gave 4 values in the value list. Please correct.
INSERT INTO HOME_DETAILS
(WHAT, M_NAME, C_NAME)
values
(: old.) WHAT,.
: old. M_NAME,
: old. C_NAME, V_USERNAME);
Kind regards.
Matondo
-
I am running Vista Business on a 32-bit system with 2 GB of memory and have had Live One Care about it since I first bought and implemented.
http://social.Microsoft.com/forums/en/onecarestarttuneup/thread/9986269f-157A-43bf-85fc-3a2790716bd4
Read the info at the link above.
It seems to be a bug in Live One Care.
You may want to uninstall Live One Care > change for Microsoft Security Essentials.
http://www.Microsoft.com/Security_Essentials/
Information on MSE at the link above.
See you soon.
Mick Murphy - Microsoft partner
-
BlackBerry Smartphones phone says that the card has an error
When I plug my card in the phone it says it has an error and I have to plug it into the computer. Should what program I use on my computer? Thank you Brandon B.
Hi and welcome to the forums and Merry Christmas!
I assume you mean to press card? Use a card reader and my computer to see the map
It should look like a flash drive. If you right-click on the map, select Properties, disk repair tools.
Run the two tests. If it looks good, it back up to the computer and use the attached procedure.
Thank you
Bifocals
Don't forget to adjust your thread.
Put the check mark in the green box containing your answer! Thank you
-
My Windows telling me that he needs 11 updates. These consistenly updates fail and the Microsoft fix did not work. Error codes are 641 and 80070641.
Hello
Did you change your computer before this problem?
You can follow the suggestions and check out them.
Method 1
You can follow the procedure in the article.
How to resolve problems connecting to Windows Update or Microsoft Update
http://support.Microsoft.com/kb/818018
Method 2
You can reset the Windows Update components.
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
Back up the registry
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registryHow to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Method 3
You can download and run the system update readiness tool.
Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
http://support.Microsoft.com/kb/947821Method 4
Step 1:
Place the computer in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a troubleshooting follow step 7: reset the computer to start as usual
Step 2:
You can manually download and install updates from Microsoft Download Center.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspx
Method 5
You can disable temporary of your security software.
Disable the antivirus software
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks
See also:
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
-
New error message to see article 871122
All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122. That's happened? I used it last night to check my email, and then I deleted some photos on the disk hard and this morning it will not connect. I don't really understand what happened to him because it was off last night.Hello
1. you are using a wireless connection?
If you are using a wireless connection, I suggest you to update the latest drivers for the network adapter and check if it helps:
http://support.Microsoft.com/kb/283658Also check this link for troubleshooting steps:
http://support.Microsoft.com/kb/314095It will be useful.
-
Original title:
Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.
Hello
1. what version of Windows is installed on the computer?
2. are you aware of any changes made to the computer, before the show?
Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.Method 1:
Step 1: Perform a boot minimum troubleshooting and check which application reports this error
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.Step 2: reinstall the application.
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-programMethod 2:
Run an analysis of auditor of system files on your computer and check for the issue.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833I hope this helps.
-
Displaying the right information to get a BSOD error help
When your computer crashes and displays a blue screen there are often very valuable information about the photo that will allow users to help you solve your problem and to know what is causing this blue screen appears.
Looking at the image at the end of the article you will see two sections highlighted, you will always want to post this information in your forum thread when looking for help she will be the most critical part of troubleshooting. The top tells us what's happening and said background where it goes to. We have just responded to two of the most important issues when you try to solve a problem.
What's not?
Where is the problem isolated to?
Most of the text is quite annoying, but if that's important to you then it may be important for us. We have all seen what looks like a BSOD, but we do not know what your BSOD.
There are more important questions that you can answer that will help your troubleshoot BSOD error message.
- What is your system brand and model? We know that you have an HP computer, but there are tons of computers. We need to know your specific model to ensure you use the appropriate drivers and we recommend the proper drivers.
- What is your version of Windows and the Service pack?
- Are you running a 64 bit or 32 bit OS?
- What is your Internet browser and version?
- Does your system use IDE or SATA disk drives?
- What virus protection software and current malicious software do you use? Is up to date?
- The issue occurred after an interruption of the power supply as an abnormal termination or power failure?
- What has changed recently?
- Does this happen often you can effectively reproduce the problem? If you can easily reproduce what steps can you take to reproduce the problem.
Here is a list of the most common mistakes of the BSOD you can see
- Stop 0 x 00000003 UNSYNCHRONIZED_ACCESS
- Stop 0x0000000A IRQL_NOT_LESS_OR_EQUAL
- Stop 0x0000001E KMODE_EXCEPTION_NOT_HANDLED
- Stop 0 x 00000023 FAT_FILE_SYSTEM
- Stop 0 x 00000024 NTFS_FILE_SYSTEM
- Stop 0x0000002E DATA_BUS_ERROR
- Stop 0x0000003F NO_MORE_SYSTEM_PTES
- Stop 0 x 00000044 MULTIPLE_IRP_COMPLETE_REQUESTS
- Stop 0 x 00000050 PAGE_FAULT_IN_NONPAGED_AREA
- Stop 0x0000006B PROCESS1_INITIALIZATION_FAILED
- Stop 0 x 00000073 CONFIG_LIST_FAILED
- Stop 0 x 00000074 BAD_SYSTEM_CONFIG_INFO
- Stop 0 x 00000076 PROCESS_HAS_LOCKED_PAGES
- Stop 0 x 00000077 KERNEL_STACK_INPAGE_ERROR
- Stop 0 × 00000079 MISMATCHED_HAL
- Stop 0x0000007A KERNEL_DATA_INPAGE_ERROR
- STOP 0x0000007B INACCESSIBLE_BOOT_DEVICE
- Stop 0x0000007E SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
- Stop 0x0000007F UNEXPECTED_KERNEL_MODE_TRAP
- Stop 0x0000008E KERNEL_MODE_EXCEPTION_NOT_HANDLED
- Stop 0x0000009C MACHINE_CHECK_EXCEPTION
- STOP 0x0000009F DRIVER_POWER_STATE_FAILURE
- Stop 0x000000BE ATTEMPTED_WRITE_TO_READONLY_MEMORY
- Stop 0x000000C2 BAD_POOL_CALLER
- Stop DRIVER_VERIFIER_DETECTED_VIOLATION 0x000000C4
- Stop 0x000000CA PNP_DETECTED_FATAL_ERROR
- Stop 0x000000CB DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS
- Stop 0x000000CE DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS
- STOP 0x000000D1 DRIVER_IRQL_NOT_LESS_OR_EQUAL
- Stop 0x000000D5 DRIVER_PAGE_FAULT_IN_FREED_SPECIAL_POOL
- Stop 0x000000D8 DRIVER_USED_EXCESSIVE_PTES
- Stop 0x000000DA SYSTEM_PTE_MISUSE
- STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER
- Stop 0x000000ED UNMOUNTABLE_BOOT_VOLUME
- Stop 0x000000F2 HARDWARE_INTERRUPT_STORM
- Stop 0x000000F4 CRITICAL_OBJECT_TERMINATION
- Stop 0x000000FC ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY
- STOP 0x000000FE BUGCODE_USB_DRIVER
- Stop 0xC0000218 UNKNOWN_HARD_ERROR
- STOP 0xC000021A STATUS_SYSTEM_PROCESS_TERMINATED
- Stop 0xC0000221 STATUS_IMAGE_CHECKSUM_MISMATCH
- STOP 0xC0000244 STATUS_AUDIT_FAILED
This thread is purely an informative thread. If you are experiencing a BSOD error please create a new thread ensure you provide information that questions on this thread.
While many BSOD errors may be troubleshooting-made the same way, there is an amount of many of them and they should be troubleshoot-carried out on their own.
If you have anything else you want to add or general BSOD issues then you can post them here, but if you ask about anything that requires real troubleshooting it should be in its own thread.
-
We get the error message "the service user profile Service does not logon, user profile cannot be loaded." Prevents us from entering the computer laptop-so how to solve this problem? Help?
Hi LisaPie,
Step 1: You can run the fixit available in the article below
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756/If you cannot start the computer in normal mode, try the steps in safe mode with networking
Step 2: Start the computer in safe mode with network. To do this, follow the steps below:
Access the menu advanced startup options by turning on your computer and pressing the button F8 before Windows starts. Advanced startup options menu select SafeMode with networking
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Screen saver has an error message preventing the opening
Screensaver displays an error message prevents the opening. Help
Hello Robert,.
I would like to know some information about the problem so that we can help you better.
What is the full error message when you say, "screen saver has an error message preventing the opening"?
Thank you for details on the issue.
I also know that the inconvenience you are experiencing due to problem of screen saver. I will definitely help you.
This problem can occur because of incorrect or corrupt files of Windows power settings.
I would suggest trying the following methods and check if it helps.
Method 1:
Create a new power plan and check the issue.
Refer to this article:
Change, create, or delete a power plan (scheme)
http://Windows.Microsoft.com/en-us/Windows/change-create-delete-power-plan-scheme#1TC=Windows-7If this does not help, use method 2.
Method 2:
Run checker (SFC) of file system and see if it helps.
Reference:
Use the System File Checker tool to repair missing or corrupted system files
https://support.Microsoft.com/en-us/KB/929833System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.
I hope this information helps.
Please let us know if you need more help.
Thank you
-
When you try to access the user profile, get the error message "the service user profile Service has no logon. User profile cannot be loaded. "The new profile tried to go through the steps of profile user fix damaged by ms, but trying to create a new user profile to copy the files from the damaged user profile does not display on my C: drive the users folder (as it should). Anyway to fix the corrupted if user profile profile are available?
Hello
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
(or two with the same password) use a test or fix the other.You can run the Admin account hidden from the prompt by if necessary.
How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
-
I did a reset on my iPad 2 and now it has an error message when I connect to my computer to access the backup. bed the error message, this iPad cannot be used because it requires a newer version of iTunes. How to upgrade the version of the ipad?
Take a look at the article, download the latest version of iTunes - Apple Support
-
Hallo,
For some reason any firefox stopped to load the site youtube for me. I can watch videos other people uploaded on facebook for example, but can not enter the site. Explorer is in charge of the site, so I tried to change the proxy settings in my firefox such as recommended in the Help Center, but nothing helped. Also, there was no update not installed I know, go to youtube by any link will just give me an error message saying: the connection was reset while the page is loading.
Pleas help me.Thank you, I looked again articles of the Center for help and resolved the problem by disabling cookies and hidden history.
If this issue is no longer relevant. But thank you.
Maybe you are looking for
-
Firefox BUG 37: Cookies - "keep until: I close Firefox ' definition of BROKEN
If you choose to customize the settings of your story and choose "Accept cookies from sites", but only "keep until: closing firefox" you'll find that cookies from http and https sites remain in Firefox after Firefox restarts. Please correct this imme
-
Why iTunes deselect pieces before burning a disc?
If something has changed in v11.4? Trying to burn a music CD and iTunes deselects 3 songs just before burning. I know that there is enough space on the disk. I even made a playlist with only 3 songs and they don't burn. That is what it is?
-
use excel to generate signals in labview
Hello I have an a problem generating a signal in labview using excel and then he charted under the waveform. In excel file, I 2199 rows and 9 columns with the second time and I want to draw time against other columns except column 1. In the rows, I h
-
Cannot print from broadcast with driver Hp Officejet 4500 wireless
Original title problems: Hp Officejet My Hp Officejet 4500 wireles doen't print from another computer. I ran the diagnostic of the printer and am told that my computer doesn't have the right driver for my HP Officejet 4500 wireless.
-
How to delete the duplicate in windows 7?
Most of my files is somehow in my computer twice. A deletion is too slow. How can I do it quickly?