The time on my Ipod will not change when its coastline, Wifi disconnects randomly, screen goes green and red and restart full iPod.
OK so this problem started about two days ago. I noticed that my time was off so I went to settings > General > Date and time. I changed the hour correctly but when I locked it and got out of her for a few minutes, it was always the same when I changed it. For example: this morning, back at the exact time that was at 10:41 20 minutes later, I changed my time and it was still stuck at 10:41 time will work properly if I am constantly on my IPod and do not block. I really need to use the alarm when I wake up every morning! I've tried everything to fix it, but nothing seems to work. Reset my IPod do not even help.
This issue has also started two days ago. I noticed that the wifi on my IPod touch 5th generation cut off while an application is open, but when I close it then connects back. It is only on my IPod, but not my IPad. It's pretty boring. I also tried to reset my router but it always disconnects.
The latest happened just yesterday. Again, I've tried my time is correctly set when all of a sudden half top of my screen turns red and turns green half lower. The screen then goes to black and my entire iPod restarts.
Thank you very much for the help. :-)
Try:
-Reset the device iOS. Nothing will be lost
Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to
ten seconds, until the Apple logo appears.
-Reset all settings
Go to settings > general > Reset and tap reset all settings.
All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.
-Restore from backup. See:
Restore your device from an iCloud or iTunes backup - Apple Support
-Restore factory settings/new iOS device.
If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.
Tags: iPod
Similar Questions
-
The default text alignment. Will not change despite the explicit specification.
Recently converted to OBIEE 10.1.3.3.2.
All alignemnt text in the PivotTable will not change to align "Left". I have put all possible horizontal alignments in the report between 'Left', but still shows as centered.
Above applies to all reports (converted from Siebel or newly created).
Am I missing something? Is there a global default value?
Help, please.Hello
Have you checked the file view.css and pivot.fst under... OracleBI\web\res\
\b_mozilla_4.You can change the alignment of this file with PivotTable segment. Published by: TErsin Sep 3, 2008 10:57
-
Police will not change when you choose to search for a font
Hello. I'm on a MBP with InDesign CC.
I opened a document that uses Frutiger 57 condensed. The original file used the same font, but the name of different fonts, e.g. "Frutiger 57Cond.
I thought that the problem would be in one of the styles, since there is no character styles, I went to paragraph and changed styles police for Frutiger 57 condensed from the Frutiger 57Cond, but that did not help. Frutiger 57 condensed is installed on my system, that's why I made this change.
Under find fonts Frutiger 57 condensed is selected, but when I click on the first series of text that uses it, it will not change the police. If I choose all the changes, nothing happens.
I tried to copy and paste everything into a new document and preflight gave me the green light, but when I have opened the folder, I got 61 errors yet. I thought I'd try!
When I open a new document and start typing in this font, everything seems fine. There are several InDesign documents that use this font that also do not have the problem.
No idea as to why this particular document send me questions of police? Please let me know if there is something I can check
Looks like you have some fonts in a folder of fonts in the document.
-
How to lock icons on the desktop so that they will not change on reboot
Until two days ago, the arrangement I did personally for the icons on my desktop have remained in their correct position. Now every time I reboot, the change of the medium-sized icons of "smaller" and they are no longer in the order in which I chose. How can I stay in the position or the grouping and the size I choose? Apparently, some features of Windows 7 has been lost. How can this be corrected?
Hello
Method 1:
The desktop icons should not change unless you change the screen resolution. Run SFC and see if that helps.
System File Checker (SFC) scan will replace the missing or corrupted system files on your computer.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929833
Method 2:
Step 1: create a user account: http://windows.microsoft.com/en-us/Windows7/Create-a-user-account
If step 1 works then try step 2.
Step 2: difficulty a user profile is corrupted: http://windows.microsoft.com/en-US/Windows7/Fix-a-corrupted-user-profile
-
Colors of the Windows 7 basic theme will not change
HI I have a mini HP with Windows 7 Starter and when I use the basic outline of Windows 7 that I can not change the options of color... once I chose to apply color options, that I touched and I always get only the basic blues... I noticed that this kind of "flat" so
Hello Saiajin,
In classic Windows help, you will be able to change the colors of the active title bar, etc.
You can experiment with different color options in the games of different colors at your disposal in order to determine the exact combination you prefer.
Chris.H
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Shortcut Windows 7 to the MS-DOS program icon will not change
I have an old MS-DOS program that I use and I need to create a toolbar that contains a link to other programs. However, when I try to change the icon for the shortcut, it passes in the properties box, but does not actually change the icon in the bar of tools/folder, instead I get an icon of Virgin paper. Does anyone know a workaround or fix for this?
What I've done is to create a command (.cmd) file using Notepad
run and the path to the app BACK for example
Run E:\rbase.exe
Save it as a file .cmd or simply change the extension to .cmd .txt
For example, call Rbase.cmd
Then using New (right click) on the desktop, create a shortcut to the .cmd file.
You can change this shortcut icon.
-
I'm trying to put together a Guide to color for my company's brand guidelines.
Initially, I worked for InDesign and copied all H, RGB and CMYK values that I had when I went in an eye my original color palette.
However when I put the same values of RGB in Photoshop I gives me a (somewhat) a different set of CMYK numbers than I had initially documented in InDesign.
Why is this?
JamieCurtis5 wrote:
It makes me feel a bit nervous leaving aside CMYK all together...
CMYK is essential for a company's brand guide. The printer ask again, it's a simple and direct question. If they cannot answer this fundamental question, that speaks well of their professional standards. It is a common practice and highly standard procedure. I do it all the time (and get answers directly in the world).
That said, if this guide in general and not necessarily related to this particular printer, it might be preferable, specify a profile which is commonly used as a general practitioner in your area. It depends on where you are. Here in Europe, it would be either Coated FOGRA39, ISO Coated v2 300% (eci).
In the United States, I guess us Web Coated (SWOP) v2 would be on a list, not because it's necessarily just for the purpose, but simply done to be the default Photoshop. Printers must get loads of the present. Same here in Europe, where this profile is never used any where, a lot of people use it just because it is the default value of the PS and it never gets turned into something more appropriate.
-
This Windows XP Home. on a Compaq Presario SR1710NX. Windows can not find the locally stored profile and logs on to a sense of temporary profile every time that the computer is off all changes is lost.
Your user profile is damaged and you put in a temporary user profile. This is why nothing is saved. Create a new user profile for yourself and copy the data from the old profile to it. After you have all your stuff, you can remove the old corrupted user profile if you wish. MS - MVP - Elephant Boy computers - don't panic!
-
browser will not change when I type a new address
When I type a new address and press ENTER, the page does not change. It remains on the same page and completely ignored my request. Help, please! I did a virus scan and found no virus. Thank you! Using Windows 7.
Hi NandyB, can reproduce this problem when you try to start firefox in safe mode once? If not, perhaps an addon intrudes here...
-
This seems almost elementary but I tried everything literally, the only thing I can think is that this is a bug.
When I'm working on work plans, they are white and the background is white, so I don't quite see the outline. I tried to change the background color to dark gray or any other color, but nothing works. I restarted my computer, the software, everything. Nothing works. It only happens to me, everyone in my company isn't the problem. We checked out the contrast on my computer and it's all good. I had two different designers tinker around with it and they say it must be a bug because they have tried everything they can and I also.
Now I simply add a grey box dark to my work plans so I can see the sketch, but it's really annoying, I have to do, especially since I work with Photoshop 4 hours per day.
You must set your GPU options in preferences to something other than "Bacic."
-
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd" > ""
< content meta = text/html"; charset = iso-8859-1 "http-equiv ="Content-Type">"
< title > visit problem < /title >< style type = "text/css" >
#footer a: link {}
color: white;
background-color: orange;
text-transform: uppercase;
}#footer a: visited {}
color: Red;
background-color: black;
text-transform: lowercase;
text-decoration: none;
}< / style >
-
my iPhone will not change when I turn it
My iPhone won't view when I turn it. Is their adjustment I can make?
The rotation lock is active?
If the screen does not turn on your iPhone, iPad or iPod touch - Apple Support
-
The only thing I changed on my computer going aol 9.1.
Give me the error message and I'll see if I can help you.
Right click on the inside of the CD installation file and run it as an administrator. and check.
-
IM treatment a recorded video of an interview where the lighting was not very good on the interviewee
IM liven up the light on the face of the interviewees
the file is a 180 MB H.264 file when importing
When I export the sound file released 33 GB in size... I'm not sure why - this
I chose the setting "no loss" as default export format
I just want the file to export the same size and quality it was when I imported it
What options to choose for this? AE does not seem to tell me what will be the end of the file and that it takes 1 hour and a half to deal with this 2-minute interview, so it'll take an ugly a lot of time to go to the bottom of this, if I'm by myself
Thank you
You got what you asked for - an uncompressed file. You have some serious reading up to do on the bases.
FAQ: Why my huge output file, and why didn't he play back smoothly in a media player?
Mylenium
-
I am running Vista with Service Pack 1 (I tried unsuccessfully to install SP 2) and this started happening a few months ago.
Hello
There are several reasons why he has done this for a few mouths.
You tell us when it happens, after what period of time, etc.
Overheating due to the accumulation of dust in the vents, etc., is a main reason for a computer laptop closed.
Installation of SP2
Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.
It will also tell you which SP you have installed.
Then choose the download of 'bit' OK to use to install Service Pack 2
Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468
Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669
This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.
http://support.Microsoft.com/kb/947366
See you soon.
Maybe you are looking for
-
Should I iMatch and music Apple at the same time?
Is there a point I iMatch and music Apple at the same time?
-
Hello! I just bought a laptop Tecra S3 from ebay.I turned it on a TI said "NTLDR is missing". Good I thing the guy who sold it has erased its data from the hard drive, no problem I'll install a new Windows XP.But... now the problem.When the laptop is
-
HW IKEV2/IPSEC algorithms supported in ISR G2 and G3 (43xx) new
Hello I'm updating crypto for all our vpn routers. I'm picking the most documented algorithms in the NextGen encryption Guide http://www.Cisco.com/Web/about/security/intelligence/nextgen_crypto.html I would use the curve elliptical vs RSA when possib
-
BlackBerry Smartphones real time to sync with the calendar?
I'm relatively new to Blackberry, my Motorola Q would make a synchronization of calendar in real time with my Outlook calendar on my pc at home. When I added an appointment in the Q, the Outlook calendar could be updated shortly, is it possible to do
-
Tool menus - the display of text instead of icons?
Hi guysGiven that I've updated Photoshop CC, I noticed that some of my menus tools have changed. In particular, the style of a large number of orders have changed text (often with an associated checkbox) to icons.Keeping in mind how annoyingly small