my iPhone will not change when I turn it

Similar Questions

• Police will not change when you choose to search for a font

  Hello. I'm on a MBP with InDesign CC.

  I opened a document that uses Frutiger 57 condensed. The original file used the same font, but the name of different fonts, e.g. "Frutiger 57Cond.

  I thought that the problem would be in one of the styles, since there is no character styles, I went to paragraph and changed styles police for Frutiger 57 condensed from the Frutiger 57Cond, but that did not help. Frutiger 57 condensed is installed on my system, that's why I made this change.

  Under find fonts Frutiger 57 condensed is selected, but when I click on the first series of text that uses it, it will not change the police. If I choose all the changes, nothing happens.

  I tried to copy and paste everything into a new document and preflight gave me the green light, but when I have opened the folder, I got 61 errors yet. I thought I'd try!

  When I open a new document and start typing in this font, everything seems fine. There are several InDesign documents that use this font that also do not have the problem.

  No idea as to why this particular document send me questions of police? Please let me know if there is something I can check

  Looks like you have some fonts in a folder of fonts in the document.

• browser will not change when I type a new address

  When I type a new address and press ENTER, the page does not change. It remains on the same page and completely ignored my request. Help, please! I did a virus scan and found no virus. Thank you! Using Windows 7.

  Hi NandyB, can reproduce this problem when you try to start firefox in safe mode once? If not, perhaps an addon intrudes here...

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• The time on my Ipod will not change when its coastline, Wifi disconnects randomly, screen goes green and red and restart full iPod.

  OK so this problem started about two days ago. I noticed that my time was off so I went to settings > General > Date and time. I changed the hour correctly but when I locked it and got out of her for a few minutes, it was always the same when I changed it. For example: this morning, back at the exact time that was at 10:41 20 minutes later, I changed my time and it was still stuck at 10:41 time will work properly if I am constantly on my IPod and do not block. I really need to use the alarm when I wake up every morning! I've tried everything to fix it, but nothing seems to work. Reset my IPod do not even help.

  This issue has also started two days ago. I noticed that the wifi on my IPod touch 5th generation cut off while an application is open, but when I close it then connects back. It is only on my IPod, but not my IPad. It's pretty boring. I also tried to reset my router but it always disconnects.

  The latest happened just yesterday. Again, I've tried my time is correctly set when all of a sudden half top of my screen turns red and turns green half lower. The screen then goes to black and my entire iPod restarts.

  Thank you very much for the help. :-)

  Try:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• Why the relative values of RGB and CMYK will not change when switching between Photoshop and InDesign?

  I'm trying to put together a Guide to color for my company's brand guidelines.

  Initially, I worked for InDesign and copied all H, RGB and CMYK values that I had when I went in an eye my original color palette.

  However when I put the same values of RGB in Photoshop I gives me a (somewhat) a different set of CMYK numbers than I had initially documented in InDesign.

  Why is this?

  JamieCurtis5 wrote:

  It makes me feel a bit nervous leaving aside CMYK all together...

  CMYK is essential for a company's brand guide. The printer ask again, it's a simple and direct question. If they cannot answer this fundamental question, that speaks well of their professional standards. It is a common practice and highly standard procedure. I do it all the time (and get answers directly in the world).

  That said, if this guide in general and not necessarily related to this particular printer, it might be preferable, specify a profile which is commonly used as a general practitioner in your area. It depends on where you are. Here in Europe, it would be either Coated FOGRA39, ISO Coated v2 300% (eci).

  In the United States, I guess us Web Coated (SWOP) v2 would be on a list, not because it's necessarily just for the purpose, but simply done to be the default Photoshop. Printers must get loads of the present. Same here in Europe, where this profile is never used any where, a lot of people use it just because it is the default value of the PS and it never gets turned into something more appropriate.

• Updated to the new Photoshop CC 2015: work plan and the background are both white I can't see any outline. Will not change when I try to get a different background color.

  This seems almost elementary but I tried everything literally, the only thing I can think is that this is a bug.

  When I'm working on work plans, they are white and the background is white, so I don't quite see the outline. I tried to change the background color to dark gray or any other color, but nothing works. I restarted my computer, the software, everything. Nothing works. It only happens to me, everyone in my company isn't the problem. We checked out the contrast on my computer and it's all good. I had two different designers tinker around with it and they say it must be a bug because they have tried everything they can and I also.

  Now I simply add a grey box dark to my work plans so I can see the sketch, but it's really annoying, I have to do, especially since I work with Photoshop 4 hours per day.

  You must set your GPU options in preferences to something other than "Bacic."

• SK2061: The wireless keyboard will not connect when the PC is turned on.

  My problem is, when I start the PC, (HPK-15 500, 319NA), wireless (SK2061) keyboard, does not connect. I have to shut down the PC so he can connect (no restart, you must stop it).  Have had the PC for 5 months and it has been published. Not changed the battery makes no difference.

  The internet statement States I shoud push the blue button until the USB receiver flashes. This PC does not have an external USB receiver, I guess it's built in! The mouse works OK.

  Hello @JimCar82,

  I read your post on how the wireless keyboard will not connect when the computer is turned on, and I'd be happy to help you in this case!

  Re-connect your keyboard to your desktop computer wireless, I advise you to follow the steps described in this document on the keyboard and wireless mouse troubleshooting. The USB receiver should be found at the back of the tower.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• How can I change my country when I have a balance that I can't buy anything with? It will not change me cause I have a balance of 0.07 pence

  How can I change my country when I have a balance that I can't buy anything with? It will not change me cause I have a balance of 0.07 pence

  Click here and ask the staff of the iTunes Store to zero the balance of your account.

  
  (142584)

• My iphone will not suddenly be updated to icloud photos?  It has been working well recently and I tried restore, reboot, turn iclould off photos and return, etc...  can anyone help?  well worked yesterday and now not...

  My iphone will not suddenly be updated to icloud photos?  It has been working well recently and I tried restore, reboot, turn iclould off photos and return, etc...  can anyone help?  well worked yesterday and now not... most of the time the number of photos don't match same new how I am download to icloud...

  Have you tried the signature to iCloud and then reconnect?

  Try a reset.

  Reset device

• (Redirected) Dell audio drivers will not load when the system is turned on for the first time after his stop.

  Dell audio drivers will not load when the system is turned on for the first time after adoption of Windows 10. I have to reboot every time. So what I'm doing puts the system into sleep. in this way, I don't need to stop and restart the system. It is Dell Inspiron N5559. Audio drivers are installed and up-to-date. Equipment works correctly.

  Hi akilesh.sharma18,

  Please repost this in the Audio forum from the laptop to help.

  http://en.community.Dell.com/support-forums/laptop/f/3517

• Repeat the questions of character: will not repeat when maintained key (even after change of repeat speed & delay at the fastest)

  When I type characters (as well as the arrow keys and backspace) etc they will not repeat when the button is kept pressed and you must wait a few seconds before being able to repeat a character or go back and delete a mistake!  This has been a problem since I accidentally leaned on a button and he kept extensible - a message box emerged by asking (I don't remember verbatum what he said) if I wanted to stop this does not happen - and in my drowsy State, I felt just OK!  I disappeared in the 'control panel' and changed the character of repetition and time short and fast many times and it never changes nothing!  I noticed that when I connect to my computer the character repeat works normally.  I'd appreciate any help because it is frustrating and annoying say the least!  Thank you, Danette

  Hello

  1. have you made changes on the computer recently?

   
  Please check if you face the same problem when recording in safe mode. It is a possibility that one of the non-Microsoft application or driver is causing this issue.
   
  Step 1.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows 7.
  e. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows 7 goes into safe mode.
  f. do whatever tasks you need and when you are done, reboot to return to normal mode.
   
  Step 2.
  If it works fine in safe mode try performing a clean boot in order to find the cause root.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
   
  I hope this helps.

• L50 - B satellite will not start when the battery is completely discharged

  Hello

  My Toshiba L50 - B won't start when the battery is fully drained but connected to the power outlet.
  I try to work most of the time on the battery to keep the battery in good shape, but when I forgot to turn off the battery drains and the system will not start when I plug in the adapter.

  The battery charge indicator is orange light as it should. Only when the battery is fully charged to 100%, it will run at startup and function normally after that. I tried to turn on the laptop several times during the charge cycle, but only when the charge indicator changes from yellow to white it starts. Tested for 2 bodies.

  My old Toshiba always immediately turned on when I plugged the adapter even when the battery has been completely drained. Am I missing a setting somewhere?

  Thanks for responding... I hope well :-)

  Toshiba L50 - B
  Windows 8.1
  Any standard/original setting since I only acquired this laptop a month ago.

  The laptop should light up if the power adapter is plugged in and power the laptop corectly any if the battery is empty or during charge.

  Please check the version of the BIOS that is available on your mobile phone and compare with the BIOS available on the page of the Toshiba UE driver
  Maybe you need to update the BIOS, but to be honest, the history seems really odd to me and I m afraid that there could be some power supply electronic problem

  So in the worst case, the laptop must be checked by authorized service provider.

• EA4500 will not change to the new public IP address

  I noticed that, after the new Firmware update, the EA4500 will not change to a new public address.  I check my logs and my IP address is the same that goes back to a 25/03/2012.  I changed my router to my old E4200V1 and it turns into a new address when the old one expires.   I tried several resets hard but in vain.

  Ask your ISP. The decision taken by the DHCP server from your ISP, what IP address it assigns. You must accept what they give.

• Windows 7 splash screen will not change after the vista update

  After updating vista 32 bit to windows 7 32 bits, the splash screen will not change and he showed the vista boot. I read a lot of forum and the web page, but this solution:

  «.. . the dummies and bad start screen for Windows 7 is due to the locale entry in the startup folder, which could not be set when editing or rebuilding the BCD. When the locale is not found, Windows boot loader doesn't know what local startup folder to look for the animated bootscreen. Thus, in order to fix the boot screen so that the splash screen can be re-established, restored or reset to original animated Windows 7 boot screen, just run one of the following commands at the prompt with administrator rights:

  bcdedit/set {current} settings regional en-US

  or

  BCDboot % WinDir % / l en

  Change the US to the language version of Windows 7 installed, as ja - JP, en - us, es - ARE, pt - BR, zh - CN, zh - TW, fr - FR, fi - FI and etc.

  Restart the computer after running the command to see the new boot UI (user interface) be used again. To check if the locale has been entered properly, just run the bceedit command in the command prompt that is running as an administrator... »

  not solved my problem and also know for many users... after updating vista in windows 7 splash screen stay the same...

  Thanks for your help
  Hispanico hispanico

  Hi hispanico,

  Thank you for visiting Microsoft Answers.

  I suggest you do a repair from WinRE (Windows Recovery Environment) system using a Windows 7 installation disc. Follow these steps:

  1. turn on your computer, insert the Windows installation DVD, and then restart your computer.

  2. Press any key when prompted to do so and follow the instructions that appear.

  3. when the Windows Installer page, click repair your computer to access system recovery options.

  4. follow the instructions.

  Please visit these links for more information on the Startup Repair:

  1. http://windows.microsoft.com/en-us/windows7/Startup-Repair-frequently-asked-questions

  2. http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options-in-Windows-7

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My PS6520 wireless printer will not print when she goes to sleep, any idea? Thank you

  My PS6520 wireless printer will not print when she goes to sleep, any idea? Thank you

  Hi 464544,

  Welcome to the Forums of HP Support! I understand once that your HP Photosmart 6520 starts in mode "sleep" you cannot send a print job, it does not automatically standby upward.

  Please take a look here:

  The printer into standby mode after five minutes of inactivity to help reduce energy consumption. The sleep time can be changed from the control panel. The printer will wake up mode 'sleep' to print when a print job is sent to it.

  However, the auto power off feature must be disabled. Auto Power-Off turns off the printer completely, you must use the power button to turn the printer back on. You can change the setting Auto Power-Off from the control panel. configuration -Source

  Menu Configuration > other Menus > Eco > auto shut-off > off

  I hope this helps.