The trouble with 4 k images editing

Similar Questions

• I've updated Windows 8.0 Windows 8.1, since Firefox run a bit oddly. In particular, when on the sites with lots of images like Facebook, etc.

  Hello, I am writing because I have a few problems with my favorite browser after update to 8.1 Windows. Here are some details. I've updated Windows 8.0 Windows 8.1, since Firefox run a bit oddly. In particular, when on sites with lots of images like Facebook. It's as if there is some sort of effect of Flikr between the office and the images, as well as between the images and the browser (a bit like old flikering of 16-bit video games). It's not too bad, but it's a question. I tried to reset firefox and restart the computer. I have not tried a repair, and I haven't done an uninstall.

  Hello, disable hardware acceleration in firefox should a restart of the application is taken into account. have you tried that too?

  Please also see if there is an available update your graphics drivers ...

• Casts a shadow on the ground with green screen images

  Hello

  I have pictures of green screen of a player market with a green screen. After the green screen overlay I want to cast a shadow of the object on the ground. Seems simple enough :-) I have tried everything I can think my green screen images like a layer 3D and then add lights, which appear to be rising shadows/light on the actor, but not cast shadows. Shadow a shadow directly behind the actor but no way to "move" it is on the floor.

  If someone could provide guidance, I would be very happy.

  Thank you

  Bob Barnes

  CantonVideoMan wrote:

  Hi bogiesan,.

  Thanks for the help.

  My film is shot with a green ground. The problem I have is that the final product must be an actor walking with a transparent background, but casts a shadow on the ground. So that the shaow displayed any context the customer decides to use the video with.

  If I try to apply a drop shadow or a radial shadow the shadow BEHIND the actor not appear below. I must do this 10 times more difficult it must be.

  Any advice would be appreciated.

  Thanks again,

  Bob

  I'm not enter the question, then, sorry. Just use the shade that you have captured. A chromakeyer to shadow is not difficult.

  The problem with faking a shadow is, Yes, it is ten times more difficult than do in the original shooting because of all the problems we have discussed. There is no interaction with the feet with a layer of shadow and 3D projection is realistic enough to be accepted by an audience; It will still look fake. You CAN create a 3D shadow carefully placing a light in a 3D scene and place a copy of your matted character perpendicular to the light source and by setting the layer to cast the shadow only. But this is not always true.

  bogiesan

• I create a new reactive site using a large part of the content of an earlier version of the trouble with the scrolling text in the gallery.

  My question is the gallery which is part of the Master Page, will not move with the scroll bar on site, he's sitting in one place, causing the header back and the text which is to extend the image below.  Here is a link to the test site (you do shorter window so that you get the scroll bars).

  http://nwphotographix.com/hayesdesigns/

  I'm pretty sure is something simple that just got away from me, any help would be greatly appreicated.

  Thank you

  John

  It seems that your gallery is pinned to the browser window. This probably isn't what you want.

  When you select your gallery and look in the Control Strip, I suspect that this shows pinned at the top of the browser window, as follows:

  

  You probably want to pin to the center of the page, like so:

  

• How to create a button in the State with two different images?

  What I mean is... I have a picture that is conveyed as a button that has not been pressed, and I also have an image that expresses the same key but this time it is pressed. Is there a way to ensure that when the button is normal I seized the image of the button upward and then make sure that when I roll on or press the Enter key, the image of the button down?

  Thank you, Ben Charter

  Hi Ben,

  Just create a Menu and with the Normal State is selected, use the fill options to fill an image in the Menu item. Select the rollover / the mouse to the bottom of the State in the States Panel, then assign an image by using the options to fill again. This is a swap of base image using normals and States of Muse down mice.

  Kind regards

  Akshay

• 5.2 Lightroom crashes when you use the spot with Wacom Intuos 5 editing tool

  Hello

  I've been using Photoshop 6.x with my Intuos 5 for almost a year and it's been great.  Recently I bought Lightroom 5.2 only to find out that when I use the spot editing tool that it freezes when I use this tool as a brush.  It starts smooth, but after brushing in my area I want to clone/heal, Lightroom seems to freeze upwards, and the spot edit tool is unusable.  I can up my pen, off the coast of the Tablet and seconds later Lightroom comes back, but the Tablet is practically unusable for me.  The mouse works perfectly well.

  I read the other posts at the end of last year 12, who walks through a few regedits and disabling some other tablet works, but none of these work for me.  Any suggestion would be appreciated.

  Thank you Ed

  Lightroom version: 5.2 [922700]

  Operating system: Windows 7 Ultimate Edition

  Version: 6.1 [7601]

  Application architecture: x 64

  System architecture: x 64

  Number of logical processors: 8

  Processor speed: 2.7 GHz

  Built-in memory: 16375,0 MB

  Real memory for Lightroom: 16375,0 MB

  Real memory used by Lightroom: 429.4 MB (2.6%)

  Virtual memory used by Lightroom: 403.7 MB

  Size of the memory cache: 300,8 MB

  Maximum thread count used by Camera Raw: 4

  System DPI setting: 144 DPI

  Composition of the Bureau enabled: no

  Exhibition: 1) 1920 x 1200

  Map #1: Seller: 1002

  Feature: 9498

  Subsystem: 16031462

  Revision: 0

  Video memory: 1005

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: Speakers (Realtek High Definition Audio)

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: LR5x20

  CardID: 38040

  Direct2DEnabled: false

  GPUDevice: D3D

  MaxTexture2DSize: 8192

  OGLEnabled: true

  Rendering engine: ATI Radeon HD 4600 Series

  ShaderModel: 10.1

  Seller: AMD

  VendorID: 4098

  Version: 1002:9498:16031462:0000

  I solved my problem.  I saw an article @ com-Intuos-5-in-LR-5 http://www.lightroomforums.net/showthread.php?19694-Spot-removal-tool-doesn-t-work-with-Wa that solved my problem.

  Step 1:

  WALCOM Tablet properties

  

  Step 2:

  Click Customize and change the default line of this graph:

  

  Step 3:

  For this

  

  Step 4:

  Click OK.

  After that, my spot stopped edit gel LR 5.2 tool while I used my intuos pen 5.

  Prior to that, I also did the procedure listed here: http://forum.wacom.eu/viewtopic.php?f=10&t=8036

  So it is possible that the two must be made so that the gel to stop.  I hope this can help others.

• regret the choice of software in image editing album?

  How regret my 'permanent' selection of editing software when I'm in my album?
  You know where you can choose "always" or "only once."

  Settings, applications, all, find the current preset application, clear the default values

• The trouble with lawyers?

  I recently downloaded Acrobat XI of the creative cloud. I am a member. To install it on my iMac. When I boot it, a screen will appear asking me to approve legal notices. It's in the MAA. But there is no text in the Panel. When I click on "Approve" nothing happens. Have left me it this way at night, then, really, nothing happens. When I click on 'Cancel', Acrobat is closed.

  I have tried unistalling Acrobat and replace. Same deal. Tried to trash AAM and re - download. Ditto.

  Really, I have no problem with the exculpatory clauses. Please, let me start my program!

  "Fixed". Here's how:

  -uninstalled Acrobat

  -find all the files associated with MAO and trashed the

  -reinstalled AAM

  -a been able to reinstall Acrobat. Unfortunately, now AAM shows all other CS6 programs ready to be installed, even if they are already installed on my HD sensation that can come back to bite me later...

• Web page does not Center on the export with CSS and images

  When you use the export for a website mockup tool, I just can't seem to align the page in the Center... I have 100%, he said in the export to the Center, but it is always aligned to the left.
  
  Am I missing something?

  Exporting HTML and Images will not have page layout. This feature only

  Works for exporting CSS and Images. The solution is pretty easy to breast

  Dreamweaver, though.

  Jim Babbage

• Set up the trouble with wrt54g

  I'm stuck in the game part of the adv easylink network set up.

  It detects my static IP address, but said that I have no connection active interenet. I'm now on the internet so I have no connection. any ideas?

  Thanks for the info. Somehow, I was able to get things to work. Thanks again.

• Rotation of the photos in iPhoto I could simply use the trackpad with 2 fingers turning motion.  In pictures, it seems that I have to use the Edit menu, etc etc?

  In iPhoto, I could simply use the trackpad with 2 fingers rotating motion to change photos quickly to stand.  In the Photos but it seems I have to use the Edit menu, etc. etc.?

  command + r or command + option + r, depending on the direction you want.

  Also, right-click on the image to the same command, hold the option for the choice

• I have a Dell computer that came with Windows XP Home edition. When I start my computer the monitoring of ERROR appears: RUNDLL error loading \3\DLBUtime.dll

  Error loading \3\DLBUtime.dll

  I have a Dell computer that came with Windows XP Home edition.  When I start my computer the monitoring of ERROR appears: RUNDLL error loading specified not found \3\DLBUtime.dll module

  I just click 'ok' and he goes, but, as for what it stop popping up everytime I start my computer.

  Can someone help me with this?

  Aprilm,

  You are LuLu5119, who posted a question last August?

  If this isn't the case, you should have started your own thread.  If so (and even if not), you should have responded to questions about Dell printers.

  Assuming that you complain of a "Error loading \3\DLBUtime.dll" message that appears when you start your computer, you should know that the DLBUtime.dll file probably has something to do with the software from Dell which has been partially deleted, but could also be indicative of malware as well as partially withdrawn.

  In both cases, the best way for start you to prevent the message at windows is to download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Install the Autoruns and let it complete the scan of your computer.  Then click on the "Connection" tab and uncheck the following entry:

  Look for an entry that has 'DLBUCATS' in the first column.  If you do not see that, look for "rundll32 \3\dlbutime.dll" in the last column ("path of the Image).

  Uncheck that entry, close Autoruns and restart your computer.  You should get is no longer the message.

  If for any reason, you find later that you need dlbutime.dll running, run Autoruns and check the box. If you decide that you need never again, run Autoruns, right-click on the entry and select Delete.

  As General precautionary measure, in case your entry dlbutime.dll was related to malicious software, rather than the Dell printing software, download the following free scanners:

  MalwareBytes Anti-Malware: http://malwarebytes.org/
  SUPERAntiSpyware Portable: http://superantispyware.com/portablescanner.html

  For MalwareBytes Anti-Malware, download, install, update and run.
  For Portable SAS, follow the instructions on the Web page (note that the instructions assume that you use a different computer to download; if you're not, just make a note of the name of the file).

• Have a Dell PC with Windows XP Home Edition with restoration, internet and the program of the questions that I went into the details in the body of the present.

  I have a Dell with Windows XP Home Edition system that uses the internet connection. Friday, he had a problem with images in line being "pixel-ed", which means that the image was blurred and boxes. So I did a restore of the system back as much as she would in July and concluded that the IAF has a program called accelerator that had been implemented to go faster, but eventually would make very good images. Then, I got that part fixed but now a game that I play "Mahjongg" won't play right and when I go to the area "help and support" to try to reschedule, so it don't open even now. Can someone help me please? Thank you

  Thanks for the help. I returned and reinstalled everything, even if it was already installed and now everything works.

• How to create ePUB with full-size images/pages to adjust according to the device?

  Friendly greetings,

  I tried, for almost two months, to convert/create my 7 books that are printed in electronic books; with the first edition had to be Nook, with Kindle on the list. Unfortunately, I am still working on just get the first one published! And I could really use any assistance to get this figured out. My intention was to publish several weeks ago... now my despair must publish before the weather gets too hot and the children are outdoors most of the time... or at least not later than Easter. (: 0)

  First of all, my books are books of photo/poetry for children of all ages. They were all designed in Photoshop, where I also created images full size for the first eBook. I received the specifications of B & N for the different devices of Nook. In the assumption that it would be better to create the largest files, thus allowing smaller size devices to fit the page accordingly to fit and the most important would not encumber a smaller image, I size my pages to 1280px x 1920px at 72 dpi. (now I hear 150 is standard?)

  My text is included in the image that design is an image = a single page. I've included a version only the full text of the poem/story at the end for those who want to set the text or use a voice reader. I obviously all original, but for the publication they were all saved as jpg.

  After a fight and a lot of frustration, I managed to finish the manuscript for Barnes and Noble Nook press Manuscript Editor. My internet is molasses and so much of this has been done in the wee hours of the morning when the rest of the time zone is asleep. I had only a page with a problem, an additional empty line/space was irreparable. I published and it had been completely sloppy to be published, although the preview looked a-okay. Only on the upper left of each image/page 1/6 was visible in the corner of my laptop to PC or Nook of my Tablet Android App. So I desperately waited another 10 hours, hoping that no one would buy my book Meanwhile, so he could be removed from the sale.

  I downloaded a demo of InDesign CC, and after two weeks of not even being able to create a new single document for some reason any twisted, I bought a month membership. So far, I am not entirely convinced of this creative Cloud malarkey together, as much... that, like I said my internet is slow... it took me nearly 20 hours just to download the software. (It is really difficult to provide records, seriously?) After a cat and a phone call that I can, in theory, now use InDesign.

  I created a new Document for Digital Publishing to the above specifications (1280 x 1920 px). I did rectangle the size of the page placeholders and place one image per page. This usually inserted the image to 50% and I have to select 100%, and then move them if necessary to place.

  So my first question is: is it possible to place an image at 100% without having to do this step further resizing? Or is there another way to place the image in the size of the page without any of these other measures that would be too good.

  Well, after placing several pages/images I have also selected each and went to Options of Export Object and checking the rasterization of Custom and "resize to text Flow.  I then exported ePUB trial to see how it would look. On the PC and tablet in landscape mode it was far better than the other, but about oh 1/3 from the bottom of each page was cut. On the Tablet, I turned to portrait and voila full page. Woohoo! But alas, I don't want to limit it.

  is there something I am doing wrong? Did I miss a step or two somewhere so that the complete picture should appear on the page? I feel like I'm about to turn the page on this thing, but he's stuck in the one after that.

  I would greatly appreciate any insight, advice, help anyone can offer. I ran the gauntlet of Barnes and Noble... cough, cough... support and apparently I ask questions that cannot respond to any press corner rep and the forums out there have no idea about InDesign. It's almost like with all fantastic beautiful screens out there today nobody wants to picture books! How National Geographic?

  Thank you very kindly.

  In case it is necessary: my laptop using Window 7 64 bit Pro, InDesign CC is 64-bit and my 10.1 Android tablet. I can view the EPUB files in the corners for PC and Nook for Android. I also have a Kindle, LumiRead and various other applications on the tablet. I also have someone get a glimpse of the finished epub, if needed, on a Mac, iPad, or Android phone... even if I don't have not one of these. Don't know who has a corner I can look good. Thanks again.

  Q: is it possible to place an image at 100% without having to do this step further resizing?

  Here I think you want your images to fit within size full page automatically. For this, you can try the following steps:

  1. create a new doc

  2. menu Goto object, and then choose image mount options

  3. Select adjust automatically and fitting drowdown, select "adjust the content to the frame. See the screenshot below:

  

  After that, your images should adjust automatically in full page placeholder images. Please let me know if this does not work or if the problem you are experiencing is different and I did not understand your problem correctly.

  Kind regards

  POOJA

• Problem with the display of Camera Raw/Photoshop edited files in Microsoft Applications

  Hello

  When I edit my portraits in Camera Raw or Photoshop and save as that sRGB JPEGS they all look very well seen in Bridge, Camera Raw, and Photoshop.

  If I find the portraits in Microsoft Picture Viewer or create a site web age of portraits in Photoshop and view in Internet Explorer, images look over saturated (especially reds) and all the portraits look like they are empty, blushing, heated and glowing!

  Unfortunately, most of the people I email, send images or post them on the web, will be viewing in a Microsoft application and therefore, they do not appear how they should do with the saturated reds.

  Arian has a solution to this is not in the dark. I can't point to invest in CS3 and a professional monitor if my edit looks nothing like the output. Information would be welcome.

  Thank you very much

  Other apps are not color-managed, and your screen probably isn't sRGB.  Poster many recent LCD using the Adobe RGB range - and the images on those without the sRGB color management will look saturated (especially the Greens and the reds).

  Because applications are not color management, you cannot do much how how your images will look.  Convert to sRGB is the normal way to handle it, but it is not perfect, as you discover.

  BTW - browsers other that IE are much better on the use of color management and honoring color profiles embedded in images.