The two external monitors show the same screen

Similar Questions

• Satellite P100: Can I connect two external monitor to the VGA & DVI port at the same time?

  Satellite P100 comes with two port external monitor. One VGA and one DVI. Can you have two external monitor works at the same time? Can you have two external monitor as well as your internal screen working at the same time (for a total of 3 screen at the same time?

  Here's what I confirm:

  Internal display + display DVI connector
  OR
  Internal display + screen VGA connector

  Is it possible to have:

  Display connector DVI + VGA connector display?

  OR

  Display connector DVI + VGA connector screen + internal display?

  As far as I know, this is not possible and you can use a DVI or VGA port.
  Output signal can be used only a single port for external monitor.

• The use of two external monitors on XPS L702X

  Hello

  I have laptop Dell XPS L702X and you want to connect two monitors external to it when I'm at my desk.  The laptop has a HDMI and display Port.  Could someone tell me 1) if it is possible to connect two external monitors to my laptop.  I do not know if this is supported.  (2) if it is supported what would be the best way to do it.  Here are some of my thoughts, but I don't know if they will work

  (1) port HDMI to a monitor and Display Port to the other monitor.  It will even work?  The monitors will look the same?

  (2) HDMI to DVI Splitter.  This seems reasonable but it will reflect the entire screen or I will be able to extend the desktop.  I don't want to see the same thing on both monitors.  Will also be this gradient.  I was kind of hoping it Full HD that I don't need absolutely.

  http://www.Amazon.com/HDMI-dual-premium-splitter-cable/DP/B000FMPR0Q

  (3) using the HDMI then gettting and external USB video card.  I'd rather not but if I have to I guess I do.

  Thanks for your thoughts and please add more options than what I have just listed.   I want to find the optimal solution.

  Tom

  Well I thought about it.  Option #1 work.  You can connect two monitors to the Dell XPS L702X.  In fact, I have three.

  (1) the computer screen

  (2) monitor 1 using the HDMI output on laptop to the HDMI input on the monitor

  (3) 2 of Montor output using Mini Display Port to VGA input on screen (using a Mini Display Port to VGA cable) I see these cables everywhere on the internet, but they all say to use with Mac.  I call the Dell technical support and they managed to send me the right cable for use with Dell.  Others may work, however, I'm not sure.  It is unfortunate that Dell doesn't have a Mini Display Port to DVI - D.  I want conversion back VGA is going back in time.  The display seems perfect for a regular job but don't know about the movies or games.

  Complaints to Dell if someone he cares

  (1) I called your sales for the purchase of monitors line and they told me wrong information on how to connect monitors and those to buy.  First, they said I had to buy a usb docking station.  The station costs around $100 and it would very definitely degrade the display.  I have the hdmi and display port of course so I want to use them.  When I pressed on this they then tried to get to buy me and switch hdmi for over $ 150.  I personally do not think it will work because I want to extend my screen do not have the same result on both.  Maybe it would work well, they seem not confident even though I was told it would work.  Also, I didn't drop $150 extra.  So I don't end up buy monitors dell of Dell because of the wrong information.  Oh they also told me I wouldn't be able to have 3 views using my video card and that I would need an external. (Evil)  Overall that's mad and I lost a lot of time trying to do a simple task of connecting monitors.

  (2) I finally decided to call Dell technical support.  I should have done this earlier, but every time I call the technical support they want me to pay.  Fortunately I get assistance for a new computer.  I'm starting to feel better Dell again.  Technical support told me that I could connect two monitors using HDMI and Display Port.   They me even a cable for the display port.  OK, I'm getting happier.  However, technical support also told me that I couldn't use 3 screens and that I would need an external video card.  They tried to repel the horribly rated usb docking station that they sell.  In all of the right specifications mine but reviews everyone has problems.  Anyway they Support went above and beyond (and I was not screaming or complain to them) that they actually had a technician out the cable.  Now, it is an exaggeration, but was really nice, because I was not happy with Dell for the moment.  I hooked the two monitors and extended my screen and to my surprise, all three screens worked.  Yahoo!  So happy.

  It was a frustrating race with bad information throughout, but ultimately, I'm happy.  I hope that you don't have to go through my frustration and make just the satisfaction of having 3 screens.

• Two external monitors can be connected to the docking station?

  Is it possible to connect two external monitors to a docking of HP 2740? If so, how it is with 1 single VGA port on the docking station. The tablet which is embodied is a HP Elitebook 2760P.

  Yes, you got that right.

  He landed again until what's available / condition on the 2nd external monitor. These days most of them VGA, HDMI and DVI while that few of them have display port too.

• How put two windows (both sides) will appear on the same screen together, one behind the other, during run mode?

  In Labview, is it possible to put two windows (both sides) appears on the same screen together, one behind the other, during run mode?

  It's a shame

  Secondary, it's a great way to call subVIs and you load only code when you call it, so it ease your use of resources.

  Anyway, you can call Vi as pop up:

  https://decibel.NI.com/content/docs/doc-2064

  You could split your FP using the separator.

  http://zone.NI.com/reference/en-XX/help/371361J-01/lvhowto/creating_splitter_bars_and_panes/

  Or you can use the control tab.

  http://zone.NI.com/reference/en-XX/help/371361J-01/lvhowto/creating_tab_controls/

  Regars.

• New X 220 supported two external monitors with the mini dock plus?

  Hello

  I need to buy a new laptop of Lenovo in emergency.

  But we must ensure that it supports dual display on two external monitors. (VGA)

  My question is:

  (1) we plan to buy with the mini dock more, she has two HDMI port.

  can it support two external monitors for Intel HD Graphics 3000?

  (we will close the covers when to use two external monitors)

  (2) can I use DVI to convert converter VGA to VGA to support two external monitors

  (3) what is the difference in weight to 220 X SATA HDD and SSD HDD?

  Please help to emergency!

  Rgds,
  Sun

  Hello

  Yes, it works.

  He must need a converter VGA (F) display port.

  Thank you.

  See you soon
  Sun

• Document from Windows Media Player AND MS Windows open on the same screen

  Hello.

  I'm doing a very long media (recorded voice) transcript of court recorded on Windows Media Player in a document typed on MS Word (using Windows XP).

  I would like to know if it is possible to have Windows Media Player and my document strikes MS Word open on the SAME screen.  I am currently switch between two programs using my bottom toolbar.  It is extremely time consuming and not very well.  Ideally, I would like to open my Windows Media Player, in a small screen on the right upper side of my MS Word document.  This would allow me to work out of the same screen without having to click will result in my bottom toolbar to switch between these programs.  I'm sure that I explained properly :-).  ANY help, suggestions and advice will be highly appreciated.

  Kind regards

  AJS

  You should be able to do it by opening the two programs, then right click on the taskbar and selecting "Tile Windows vertically".  Just make sure that they are only two open programs.

  This screenshot shows WMP and WordPad, because I do not have Word installed, but it should work exactly the same thing:

  

• I can't run in windows xp screen goes to normal boot options and mode safe but keeps coming back to the same screen

  I can't get windows xp to run - I set a restore point - rebooted - ann that he goes to the economy/regular mode promp but when I try to open windows it just brings back me to the same screen.  Tried to run the system restore but disc is not xrecognize it. Help!

  Thank you Gary

  Do not follow exactly...

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If your system uses to work properly, what do you think might have happened to her since the last time, that it did not work properly?

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

• Manage icons on the same screen

  Hi team,

  I have the following icon in a file of my application:

  BitmapField phone = new BitmapField(Bitmap.getBitmapResource("phone.png"), FIELD_VCENTER);
  

  I have to show this icon more than once in the same file.

  I defined the following code:

  _manager = (VerticalFieldManager)getMainManager();
  
  _container_client_info = new VerticalFieldManager();
  
  _container_phone = new HorizontalFieldManager();
  _container_phone1 = new HorizontalFieldManager();
  
   XYEdges rounded_edges = new XYEdges(11, 11, 11, 11);
          Border rounded_content = BorderFactory.createBitmapBorder(rounded_edges, Bitmap.getBitmapResource(_resources.getString(IMAGE_BOX)));
  
  _container_client_info.setBorder(rounded_content);
  
  String _pType = _seed.getElement(HopperData.PHONE_TYPE);
  String _pType1 = _seed.getElement(HopperData.PHONE_TYPE1);   
  
  LabelField _phone_type = new LabelField(" " + _seed.getElement(HopperData.PHONE_TYPE) + ": ");
  LabelField _phone_type1 = new LabelField(" " + _seed.getElement(HopperData.PHONE_TYPE1) + ": ");    
  
  LabelField _phone = new LabelField(_seed.getElement(HopperData.PHONE), LabelField.USE_ALL_WIDTH);
  LabelField _phone1 = new LabelField(_seed.getElement(HopperData.PHONE1), LabelField.USE_ALL_WIDTH);
  
  _container_client_info.add(_container_phone);
  _container_client_info.add(_container_phone1);
  
  if (_pType.equals("Cell"))
     _container_phone.add(cell);
  else
     _container_phone.add(phone);
  
  _container_phone.add(_phone_type);
  _container_phone.add(_phone); 
  
  /**
    * Control for second phone.
    */
  String telephone1 = _seed.getElement(HopperData.PHONE1);
  
  if (!telephone1.equals("0"))
  {
     if (_pType1.equals("Cell"))
          _container_phone1.add(cell);
     else
  
          _container_phone.add(phone);
  
     _container_phone1.add(_phone_type1);
     _container_phone1.add(_phone1);
  }
  

  The result displays the following information:

  Icon1 phone Type 1: number of Phone.1

  ICON2 Type pf 2 phone: phone number 2

  in this case the icon1 and icon2 are the same when the phone type is differet to CELL

  Download

  Phone type: Home

  Phone type: work

  I'll show the same icon.

  So I have managers different vertical and horizontal for 1 phone and phone 2 that I will have to define the following code twice:

  BitmapField phone = new BitmapField(Bitmap.getBitmapResource("phone.png"), FIELD_VCENTER);
  

  O how is the icon even twice or more in the same screen.

  Thank you

  Jorge Luis

  Hello

  I think that in the current scenario, you need to create different BitmapField with the same resource i.e phone.png.

  I think that if appropriate, you can use a listfield and in each line, you can view the different entries and use the drawBitmap method to render the same image.

• Both adf shares VO even with different params on the same screen

  Hello everyone,
  My current problem is that I need to create a screen with several sharing the same VO graphics but with different settings for each of them.
  Lets assume I want to use EmployeesVO to show the 2 graphs on the same page jspx.
  A chart will display all the salaries of employees for the "Marketing" Department and the other will show all the salaries of employees for the Department 'IT '.
  Remember, I want them both on the same screen.
  The read-only VO will look like this:
  SELECT First_Name
  Salary
  Employees
  WHERE department_id =: p_dept
  
  To do this, I did the following:
  For each graph, I created an iterator.
  For each iterator I created an ExecuteWithParams. (a receiver "Depto Marketing" and anther receive "IL Depto")
  For each ExecuteWithParams, I created an InvokeAction.
  
  When executing the application all the graphs show the same information. All of them show only one (the last in the list of executables InvokeAction) Department.
  
  The question is: how to keep each graph has their own parameter on the same screen?
  
  I use Windows 7 x 64 SP1 JDeveloper 11.1.2.1.
  
  Thanks in advance!

  Why not add 2 instances of the same original version of AM. For each instance of defined the different VC.

• Need new screen for Satellite A85: laptop that has the same screen 15 ''?

  Looking for a new screen for this laptop and I was wondering what laptops use the same screen or the screen that fits?

  Fit the toshiba a30 screen? or should it be a 15 xga screen? There is a standard 30? will also be an adjustment of lcd a60? and if it would be an a60 housing also correspond to the screen? help please?

  required screen really, just need standard tft works ok?

  Hello

  Satellite A85 is unknown to me but to my knowledge the A30 has been delivered in different views:
  15.0 inch, screen SXGA 1400 × 1050 pixels.
  15.0 inch XGA, 1024 × 768 screen pixels

  I think that this view could be compatible with the A85, but maybe the display resolution is a little different.

• How to use transfer windows for xp to xp. When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  How to use transfer windows for xp to xp.  When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  Hello, welcome.

  The process is automatic and the maximum transfer rate should be about 20 GB/HR. If the process crashes during that long of a time, it's probably because of something internal rather something you're doing wrong.
  For reference purposes, I included this link. It goes into the details of the migration from XP to Vista (and the basic steps you follow). The instructions are for migrating to Vista via the network, but you can easily follow the steps and choose a different option for your specific installation.
  http://www.windowsnetworking.com/articles_tutorials/migrating-Vista-using-Windows-easy-transfer.html
  For both machines, I recommend you to prepare for the transfer using the following procedure:
  1. click on START > run

  2 type "msconfig" (without the quotes) and press enter

  3. go to the "Startup" tab and uncheck all the entries displayed

  4. click on 'Apply' at the bottom right

  DO NOT RESTART YOUR COMPUTER AGAIN

  5. click on START > run

  6. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.

  7. type chkdsk /r and press enter

  8 allow the system to attempt disassembly of the volume

  9. allow the system to plan restarting

  10. restart your computer

  11 let checkdisk analyze the file system on your hard drive

  12. Once completed, perform the same steps on the other machine

  13. Once completed, repeat the transfer

  
  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP 07 login I get the black and white screen where is safe mode option and then just loop it back to the same screen.

  When I powered on my Windows O.S. ' 07 I got the black and white screen where the option of safe mode and when I entered beginning that normally he just came back to the same screen of the suggestions?

  Hi RudyNY,

  1. you have Windows 7 or Windows XP installed on the computer?

  2. you receive an error during the process of loop?

  3. did you of recent changes on the computer?

  4 when was the last time it was working fine?

  Check to see if you can boot into safe mode in the Advanced menu options and the last good known Configuration.

  http://www.Microsoft.com/windowsxp/using/Setup/support/nostart.mspx

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

• How to have 2 copies of documents on the same screen in Vista

  How to have 2 copies of the documents on the same screen in Vista?  I am trying to clean up the documents folder and want to drag folders of one over the other.  I'm used to be able to do under Win XP.  Did not understand how to do it under Vista.  Have to continue to go back is a pain in the pututie.  TNX in advance for your help.

  Open the #1 file... Then, open the file #2... Right-click on an open bar space tasks... click on see the windows side by side.

• I had the opportunity to see all the drives in windows 7 and XP virtual machine on the same screen. He suddenly disappeared, and I need.

  As I set up my computer with Windows 7 Professional and XP virtual machine, I could see all the readers, W7 and the virtual machine on the same screen. I can't do now for some reason any. All I can understand what is is past is that I got a page long list of automatic updates of W7 and some XP updates and as far as I know, the current page of readers has disappeared since then.  I need this feature if I can transfer files between W7 and XP because some of my programs are in one program of windows. I have nothing special when I installed XP to achieve this functionality, so I really don't understand what it controls.  How can I get that back?

  I have solved my problem by trying everything that moves. Here are my steps:
  -Open Virtual PC and minimize it
  -In the Windows 7 machine, click Start click all programs
  -Select Windows Virtual PC
  -Select Windows Virtual PC (in the drop-down list)
  -When the window opens, right-click on Windows XP Mode
  -Select share >
  -Select the homegroup (read/write)

  -Minimized open Virtual PC
  -Select my computer
  Windows 7 disks will be under other

  I hope this works for you also. As I said, it worked like this until I had a huge list of automatic updates of Windows 7 and XP more some updates. Apparently, one of them cut something.

  Even a blind squirrel finds an Acorn once in a while!