The upgrade of Log Insight affect alerts?

Similar Questions

• The upgrade of Windows will affect the following programs or devices I (need help)

  The upgrade of Windows will affect the following programs or devices:

  These devices may not work properly after the upgrade. Before the upgrade, we recommend that you update the drivers for those devices. Cancel the upgrade, open the control panel and search for "update device drivers" or go to the website of the manufacturer of the device to search for updated drivers.
  • • Keyboard filter

  I want to know how to uninstall it. And

  where I can get this update for the device.

  I have 1215ee DV6

  Product no. - NZ341EA

  Please provide the right solution.

  Launch Control Panel, in the section "Programs" click "Uninstall program. Select 'HP Quick Launch Buttons' in the list, and then click the uninstall

• Upgrade of log Insight in paragraph 3.3.1 of the questions!

  I do some tests on the 3.0 upgrade procedure in paragraph 3.3.1. When I connect to the IP address of the master node and import the file pak after a while he said that the upgrade is successful and to display the State of the cluster. I click on the State of the cluster and see that the second node is now the upgrade... After a few minutes, the web page of administration for the master node is now insensitive!  When I connect to the third node and look at the State of the cluster, all nodes are showing version 3.0 and the connected state, it seems that the upgrade is blocked or something!

  I have now solved this problem in 3.3.1.  There is a new version of JAVA in 3.3.1 (jre1.8.0_71), who knows nothing about the previously configured cacerts keystore.

  Resolution (on each Cluster node)

  1. CD /usr/java/jre1.8.0_71/lib/security/
  2. .. /.. / bin/keytool-import - alias loginsight-/home/cacert.crt - keystore cacerts file file
  3. Restart the loginsight service
  4. Double-check this transmission of events will now be stable!

• Help - LI running, but get Apache2 Ubuntu default page while trying to access the Web interface of log insight

  Hello

  I installed the Log Insight 2.5 VM via vCenter Server ESXi 5, 5. I was able to deploy the virtual computer successfully and you can see the network through VAPP Options settings. (Attached picture - TIME settings).

  Question:

  Unable to access LI web Interface. While trying to access the Web interface, I get 'Apache2 Ubuntu by default Page' (img attachment). Insight of the newspaper runs and opens the web application on port 80.

  Newspapers, controlled far-

  status of /etc/init.d/loginsight

  Open a session running Insight

  Attached image Loginsight2-DURATION - file /storage/core/loginsight/var/runtime.log

  # sh li - cassandra.sh - status

  SH: li-cassandra-sh: not found

  Check if the tcp 80 port is open through the netstat command. Yes, it is open.

  Telnet on port 80, it says connection and crashes. Image attached - telnet-LI

  Able to ping the IP address successfully.

  How can I check http logs on console LI?

  I would really appreciate response to this soon. I'm working on installation LI for more than a week and struggling to get through this way.

  Thank you

  Radhika

  I believe that you with the configuration, but I tell you that the configured IP address and the IP you hit in your browser are not still the same IP, Log Insight does not work on Ubuntu, so you hit another system. To prove this, connect you to the console of the Insight newspaper and run:

  # cat/etc/SuSE - release

  SUSE Linux Enterprise Server 11 (x86_64)

  VERSION = 11

  PATCHLEVEL = 2

  You will see that you are running SuSE to see a Ubuntu screen tells me that you have an IP address duplicate in your environment and you hit a node that is not an Insight newspaper. I hope this helps!

• Log Insight event channel - default behavior record

  Once a Windows Server has an Agent Insight of the journal deployed and configured and the system, Application and safety chains are monitored it sends all events generated on the server to Log Insight?  My guess is Yes, but for some events generated on the server I can't find in a search on the server Insight journal.

  As Marc mentioned, it's all by default. If you believe that the e-mail are missing, take a look at the page/admin/agents to see if the drops are reported.

• Log Insight (v3.0.1) Linux Agent Install on VCSA v6?

  Documentation has information contradictory to decide or not to install the Agent of Linux Journal Insight on a version to 6U1 vCenter device.

  Within the Insight v3.0.1 journal the following statement indicates the Agent Insight of the newspaper must be installed:

  

  In the documentation of Log Insight 3.0 the following shows it takes to just install the syslog server in vCenter to transmit to the server of Log Insight.  No mention of the version of vCenter and no mention of the installation of the Agent of the Linux Journal Insight on the vCSA.

  

  So I turn to google, which only adds to the confusion...

  William Lam blog «a glimpse of native syslog support in VCSA 6.0» presents Preview setup of vCSA version 6 transfer of syslog logs and Log Insight.

  However, Steve Flanders blog ' newspaper the Agent: Linux Configurations for Common Applications " refers to the installation of the Agent of Linux Journal Insight.

  Anyone would provide clarification?  Is there a better method of practice?  If the Agent installation is the best practice that the agent provides on the native syslog in vCSA v6U1?

  Thanks in advance!

  Two books - the goal is just to get syslog to LI. The reason why LI says that you must use the agent is that vSphere content pack, and more particularly the dashboard "vCenter Server - Application" requires that the agent is stopped working. If you use syslog-ng, you will always receive the events, but this dashboard vSphere content pack will not work. I hope this helps!

• vCenter Server does not send data to vCenter Log Insight

  I second vCenter server in another site, in Insight Log connection tests but I don't see any data from it...

  ESXi hosts connected to this server vcenter report their data after you run the command configure esxi on the tank.

  Where I can watch on the vCenter box that does not ensure that its installation correctly to send the data?

  Log Insight does not change to vCenter server so there is not place to search the vCenter Server (API calls only - you could try to look at events for the instance of vCenter Server view connection / disconnection of the events in log Insight). Usually when the vCenter Server events, tasks and alarms are not observed it stresses a connection permissions problem. The user specified for vCenter Server integration - must read-only permissions that are set on the object level superior vCenter Server and have you selected the checkbox to enable the authorization to broadcast across all objects? If so, can you generate a beam of support-> page Health Administration and transfer it by the directions here: http://kb.vmware.com/kb/1008525 (not necessary for a SR, simply create a file called chasehansen)

• After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged as an administrator, but cannot connect to the internet using the standard account. How to fix this?

  After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,

  but unable to connect to the internet using the standard account.  I have the latest version of the Solution Explorer.

  How to fix this?

  Glad to hear it.

  If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem.

• What happens in newspapers if the Log Insight Server is down or if the agent Log Insight Windows isn't able to commmunicate with Insight Server logs

  If the agent Log Insight Windows is not able to communicate with the Insight logs server because of a network problem or Log Insight Server is down, what will happen in the logs on the computer monitors which agent?

  Are newspapers sent again to the server where it didn't the last time?

  Is the frequency at which the windows agent sends the data to the server? Is - that, as soon as the agent believes that any changes in the log files, it is followed are sent or any interval of time is used by the agent.

  And what is the amount(size) of the data windows agent sends to the server by calling?
  

  
  

  Thanks in advance.
  

  Kind regards

  Mohan G

  1.) agent implements cache storage - default to 200 MB, but can be increased up to 2 GB. Once the cache is full, the agent will drop newspapers.

  (2.) all that is in the cache is sent

  3.) very close in real time and similar to other agents of syslog. Some batches is low, more the cfapi sends the compressed events

  4.) for cfapi depends on, but less than syslog. For syslog, identical to syslog so typically around 170 to 200 bytes. If you are looking for bandwidth calculation see: http://sflanders.net/2014/08/20/log-insight-calculator/

• Replace the certificate SSL of Insight Log with a CA signed cert

  I'm trying to generate a cert for Insight Log using the method described in this blog post (below) using an automated batch file

  http://www.derekseaman.com/2012/09/VMware-vCenter-51-installation-part-2.html

  The chain.pem file resulting includes my cert and chain cert CA.  When I try to add to the Insight Journal, it is said that the cert is invalid.  Is that you guys can provide suggestions on how to change this piece of lot code to use Log Insight?  The meat of the lot is listed below (I just left aside all the variables that are defined in advance)

  CD /d %Cert_Path%\loginsight

  % OpenSSL_BIN % genrsa 2048 > rui.key

  % OpenSSL_BIN % req-out rui.csr - rui.key - new config key - loginsight.cfg

  Certreq-submit - q - f config "% nom_autorite_de_certification %" attrib-"CertificateTemplate: % Cert_Template % ' rui.csr rui.crt

  % OpenSSL_BIN % pkcs12-export - in rui.crt - inkey rui.key - certfile % CA_Cert_Chain % - name rui-out rui.pem

  copy/b rui.crt + % CA_Cert_Chain % chain.pem

  You must have a file that contains the key and the string, otherwise you will get an error. This command:

  % OpenSSL_BIN % pkcs12-export - in rui.crt - inkey rui.key - certfile % CA_Cert_Chain % - name rui-out rui.pem

  Creates a file, but rui.pem is incorrect. It is actually creating a rui.pfx (see at the bottom of this link: The Most Common orders OpenSSL). I think the problem is that you have the - flag of knots at the end of the command (see what is the purpose - nodes in the openssl argument? - Stack Overflow). A visual way to check is to open the .pem and ensure one contains a section – BEGIN RSA PRIVATE KEY. The chain.pem does not work and the rui.pem is binary, because these two will fail. I hope this helps!

• Out-of-place of the upgrade to 11.2.0.4 (from 11.2.0.3); How will this affect certain elements?

  
  Hi all

  I've never done an update of the fix for db set, and from what I've read today, I'll have to do a full install of 11.2.0.4 to have this patch set applied.

  Sounds scary, and being a rookie DBA Oracle, whatever that means to my existing installation of the Oracle (Oracle 11 g 2 on Windows Server 2008R2) database?

  If I do an upgrade out of place (recommended Oracle) and create a new home, what will happen to the existing/etc diagrams?

  My request is configured to connect to SERVERA, SID = 123 so when I install a new home, etc., does it change anything? I have read that I need to change the files tnsnames in my new home is similar to my current tnsnames file...

  Basically, I want to upgrade to the Group of hotfixes 11.2.0.4 b/c it is supposed to fix a bug that I have, but I want to be able to keep the 'settings' the same for end-users and applications (SERVERA, SID = 123).

  Thanks in advance

  It must be remembered that basic data/binaries are separate from the database itself.  As a general rule, you first install the software (as you did for 11.2.0.3) and then create a database. Best practices of States that the location of the database files must be outside/different then the location of the binary files.

  When you install your new 11.2.0.4 in a new place, it's all what you do - installation does not affect the existing database. Once the 11.2.0.4 software is installed, you can upgrade the database by following the steps described in upgrade guide (the stay of files of database where they are, but the database is updated from 11.2.0.3 to 11.2.0.4) and when the upgrade is completed successfully (11.2.0.3) old binaries can be uninstalled at leisure.

  HTH
  Srini

• Cannot enter 'log-in' page after the upgrade of VISTA SP1 x 32 SP2 with failure code 0xc0190036 340/47122 (explorer.exe)

  I was "forced" to upgrade my computer to SP1 to SP2 when I tried to download the latest msn who.

  The upgrade part wasn't serious and VISTA asked me to restart my computer after the upgrade. Then I REBOOTED.

  The problem came when the final stages of the upgrade, which took part after reboot. It was somewhere near STADIUM 1/3 or 2/3 and then suddenly all blackened. I'm POSITIVEMENT SAFE that my computer is connected to the power supply (mine is a laptop). And then when I start to restart my computer (the second time), I got this message

  0xc0190036 340/47122 (explorer.exe)

  Then I restarted and I got to a page where windows told me that my computer is not able to be marketed with success because of the recent changes I made.

  I did an upgrade from the night before, where I update the OFFICE GENIOUS sthsth (sorry, but I forgot the name). I need to upgrade this thing in order to be able to upgrade to SP2 (complicated huh? lol)

  I tried to use the recovery thing and save the thing but WINDOWS insisted that I do not have a recovery... I would say is quite disappointing...

  COMPUTER:

  HP 2133 NetBook

  VISTA HOME BASIC run x 32

  I ' ve done some searching on the web but found nth related code 340/47122 and VISTA HOME BASIC x 32 and SP2...»

  The last method I want to use is the method of parameters factory reboot, restore... so here I am, ask help from experienced users. I don't have any DVD or CD ROM for the restart or what. any method that can safe me to restart my computer?

  Million thanks,

  momikoo :)

  Hello

  Method 1:

  I suggest you to check if you are able to start in safe mode or last known good configuration. Follow the steps mentioned below.

  a. restart the system and keep tapping F8 until you reach the start menu.

  b. Select secure known mode/last good configuration in the list and press ENTER.

  Method 2:

  I suggest you follow the steps mentioned in the link given below and let us know if your problem is solved.

  Error code on a black screen when you try to install a Service Pack in Windows Vista: "0xc0190036."

  http://support.Microsoft.com/kb/975430

   

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• The upgrade with an SSD

  I plan on migration to an SSD soon. After the upgrade SSD will appear as drive E:? If so, how can I change the C: drive SSD? I use a computer house built, based on the motherboard ASUS P5K - E. The processor is Intel E8400 3.0 GHz. I have 2 GB of RAM. Please ask me for more details if you need it. Thank you!

  If I understand you correctly, you want to change your system so that the first disc (the one where Windows is installed, as well as all your programs) is a new SSD.

  Assuming that the new SSD is at least as large as your current system (c) partition and assuming that there are no other partitions on your current hard drive more (I assume that your current D: is a CD or DVD drive) the right way to achieve your goal would be to do the following:

  • Clone the current C: drive on the SSD drive (preferably, but not necessarily, in an external USB enclosure)
  • Turn off computer
  • Remove the existing computer C: drive
  • Physically install the SSD to the computer (for example, out of the outer shell)
  • Turn on the computer and restart
  • At this point, you can stop (a) or (b) install the old hard drive as a second internal drive or (c) put the old hard drive in the external box.  For one of the last two options, you can use the old hard drive for backup.  I would hold off the coast on the restructuring of the old hard drive for at least a few weeks until you are sure that all cloned correctly.

  If you are not using an external enclosure during the cloning operation (for example, you install the SSD as a secondary internal drive), you MUST shut down the computer WITHOUT REBOOTING and remove the original hard disk before rebooting.  (See, however, notes Anna me at the end of this response.)

  If you want to have the two former players and new internally, be sure to log in using the appropriate connector and set the jumpers to ensure that the SSD is considered to be the main or the "master" drive

  Cloning software

  If you have a Western Digital hard drive, you can get a version of Acronis True Image free of WD (http://support.wdc.com/product/downloaddetail.asp?swid=119) or you can get the software of cloning separately (this is not an exhaustive list and in no particular order, some are free, some not):

  Acronis True Image Home
  EASEUS ToDo Backup
  Paragon Drive Copy or Partition Manager Personal
  Casper
  Norton Ghost

  XXClone

  Macrium Reflect free
  What follows is a very old post of 'Anna' in the Microsoft support newsgroups (the predecessor of "Microsoft Answers", which, in turn, was the predecessor of the current "Microsoft Community."  I edited the message refer only to cloning, rather than "Disc imaging" as well (another method of backup not useful in your situation). Although some details have changed with the new versions of the software, it is always interesting to read:

  Detailed instructions for the use of Acronis True Image leprogramme to clone a hard drive

  Within the framework either of these two backup & recovery process, you are
  dealing with two hard drives - source & destination records say.
  the source is the HARD disk drive you want to save and the destination disk
  is the HARD disk that will be the recipient of the cloned content of the
  source disc or the recipient of the disk image that you create.

  When you use both methods, it is usually best for most users to use a
  drive external HARD as the disk of destination, i.e. the recipient of the cloned
  content of the source diskette or the recipient of the disk image created. This

  
  can be either a USB or Firewire cable or external SATA HARD drive. While the other internal
  HARD drive can also serve as the destination disk, that there is an additional element
  safety in the use of an external HARD drive because this player will normally be
  disconnected the system except for the cloning disk or recovery
  process.

  Here are the step by step instructions for
  by using the Acronis True Image 9 program to clone the content of a HARD disk to
  external HARD disk. (The steps are essentially the same using the latest ATI 10)
  (version):

  1. with two hard drives (source & destination disks) connected, start.
  Ensure that no other storage device, for example, flash drives, ZIP drives, etc.,.
  are connected. It is also probably a good idea to close all programs, you
  may have to work in the shadow - including any antivirus antispyware
  programs - before this disk-to-disk cloning operation.

  2. access to the Acronis True Image 9 program, under "Pick a task", click
  on 'Clone disk '. (In version 10 of ATI, click "manage hard disks" in the)
  "Choose a tool" box, and on the next screen click 'Clone disk').

  3. in the next window "Welcome to the Disk Clone Wizard!", click Next.

  4. in the next window of the "Clone" Mode to select the automatic option (it should
  be the default option selected) and click Next.

  5. on the next window of 'hard drive' Source, ensure that good source
  HDD (disk you duplicate of) was selected (highlight).
  Click Next.

  6. on the next window of 'hard disk of Destination', ensure that good
  destination of HDD (disk you duplicate to) has been selected (even once, click
  to highlight). Click Next.

  7. in the next window, select the option "delete partitions on the.
  destination hard disk. Understand that all data currently on the disk which
  will be that the recipient of the clone will be removed before the disk cloning
  operation. Click Next.

  8. the next window will reflect the disc source and destination. Once again
  confirm that the correct commands have been selected. Click Next.

  9. on the next window, click on the button continue. A message box appears
  which indicates that a restart will be required to undertake the drive cloning
  operation. Click on restart.

  10. the cloning operation will pronounce on reboot. With modern
  components and a medium to high power processor, data transfer rate will
  be in the range of approximately 450 MB/min at 800 MB/min during cloning to
  an external USB HARD disk. much faster when cloning to another internal
  HARD DRIVE.

  11. when the cloning operation has been completed, a message
  indicating the disk cloning process was a success, and ask you to
  Shut down the computer by pressing any key. Do it and unplug your USB
  external HARD disk.

  If, however, the destination drive was another * internal * HARD drive, see the
  NOTE below.

  12 note that cloned content now residing on the external USB HARD drive take
  on the file system of the source drive. For example, if before the
  disk cloning operation your USB external HDD was formatted FAT32 and
  your XP operating system has been formatted to NTFS, the cloned content will be formatted in NTFS.
  There is no need to format the USB external HARD disk before the disk cloning
  operation. Similarly, it is not necessary before the operation of disk cloning
  to format a drive HARD internal if use you a drive HARD internal as the
  destination drive.

  13. the system restore can be performed by cloning the content of the
  data from the external DRIVE for a normal HARD internal disk drive
  process of cloning such drive as described above.

  NOTE: Just another point which should be emphasized with regard the
  the recipient of the clone disk cloning operation would be an another intern
  HARD drive and not a USB cable or Firewire external HARD disk. Immediately after the disk
  cloning of the machine must be decommissioned and the source that HARD drive should
  be disconnected. Boot ONLY on newly cloned drive. CAN I NOT BOOT
  IMMEDIATELY AFTER THE OPERATION OF CLONING WITH TWO CONNECTED DRIVES.
  It is quite possible that in doing so, it is likely to cause future
  starting with the cloned disk problems. Of course there is no problem in this
  area should be a port USB or Firewire EHD be the beneficiary of the clone since
  device is not usually bootable in an XP environment.

  **************************************************************************************************

  LEM:

  As you may know not my previous posts about this issue of cloning/disk-image disk, I am rather partisan passionate about Casper 6 - disk cloning program and highly recommend this comprehensive program for most PC users as a backup tool. (I recognize that this is probably of little interest to the OP because I guess it is concerned primarily or exclusively with cloning just the content of its failure (apparently) HARD drive to a newer HARD disk. And it seems that it may have other problems as well!)

  The reason for this post is in my "NOTE" (quoted above) caveat regarding the sea program. I wanted to mention that one of the main reasons we prefer program Casper to other disk cloning programs (for example, the Acronis one) is that, unlike these other programs Casper completely avoids this potential problem I did reference.

  During the two years since we started working with the Casper drive cloning program we had done (or were involved with) hundreds of disk cloning operations, involving a wide variety of PC brands/models, hard disks (both PATA & SATA), etc. During this time, we have never met a * single * instance of the problem raised. IE a user could clone the contents of his HARD 'source' to another disc * internal * HARD drive and would not (possible) later problem affecting the ability to start the (cloned) destination HARD disk even when the system was booted to the HARD drive with the cloned HARD disk connected source * immediately * after the disk cloning operation.

  Under this scenario the cloned HDD would be obviously treated as a HARD secondary, a drive letter assignment drive of (obviously) other than C:. However, the source disk HARD later disconnect so that would imply the boot * only * the newly cloned HARD drive, this drive would start without incident and be granted the 'normal' C: drive letter assignment.

  In addition, two hard drives must be connected in the system and the user changes the BIOS boot priority setting to accommodate a first start at the cloned disk as HDD will start without incident. And, of course, the ancient source THAT HDD would be then treated by the system as a secondary as HDD should in these circumstances.

  And if the user decides to start at the disk of origin at a later time (for some reason any), the boot of this player would normally occur.

  I thought that the information above might be interesting for you & others.

  Anna

• Log Insight integration

  I'm under vCenter Operations Manager 5.8 on a 5.1 vCenter environment and Log Insight 1.0.4 - 1169900. I added the content pack to connect an overview, but I don't seem to be able to successfully run the script that is necessary for redirection newspapers vcops connect an overview. The https://solutionexchange.vmware.com/store/products/vcenter-log-insight-content-pack-for-vcenter-operations-manager/files/14352 instructions are not exactly clear to me, but I tried

  ./vcops_loginsight_admin.sh configure activate-journal-the redirection ip-address-of-newspaper-insight

  and received the following errors resolve about the 'News' user and she eventually say no destination address set.

  I tried to log in as root and admin, but receive similar failures.

  The guidelines also refer to by selecting a checkbox for "enable integration of alerts" on the Configuration page of the integration of VMware in the section of the administration of the insight of the newspaper, but I don't seem to have this. Do I need to run Log Insight 1.5 for this be supported?

  Who it is successfully configured this where they can give me some advice?

  Thank you

  LogInsight 1.0.x does not support that.

  You need 1.5, which will be available soon (as I know). If the 1.5 PublicBeta is still available, you can try with it.

• Impossible to get the upgrade to 2.3.2 to 3.2 to work

  A customer asked me to update their meter consumption for them and for me, it seems that the upgrade process does not at all.  I have made several attempts following the instructions in the documentation, and each ends with the same failure; Java Exception errors on the device of the user Web interface login.

  1. I have download the EGGS and make the basic configuration of the device, import of EGGS post I was just setting the password of the user Web interface and time zones.  I tried to connect and configure the basic customer information in the system, I also tried doing nothing and leave it alone.
  2. I opened on the 2.3.2 SSH source server running "service sshd start.
  3. On the destination machine 3.2, I run "importum 10.1.1.13 232" complete the order with errors, request never passwords as expected.  When you look at the message logs, I found that the connection between the destination server has been denied.   Try connecting manually, the SSH connection is denied.  During the migration attempt fails like this, the appliance will be unusable.  Just open the user Web interface product of Java Exception errors.

  I managed to solve the problem of connection by adding sshd: ALL the files hosts.allow, but that did not help my migration to complete.  When you run updateum, it now invites me as expected for the source root password.  It seems that it ends, and now the login page for the user interface will go up.  But when I login I get a Java Exception error message.

  Hello. Thanks for the detailed description of the problems. I believe that we can correct the problem.

  In Version 3.0, we started to encrypt the password for the mail Server Page manage (if one was supplied). This required a manual step to hide this password before the migration. We have neglected to mention this fact in the current migration instructions. I apologize for this error. You have two ways to proceed. I recommend the B method.

  Method A:

  1. delete the e-mail server on the 2.3.2 password system (Page manage), repeat migration, and then restore the password

  Method B:

  1. SSH to the system 3.2 (or open a vSphere client console)
  2. execute: stopping tomcat service
  3. run: sql (this is an alias for a command that will put you in an interactive shell to PostgreSQL)
  4. type: update 'EmailServer' set password = ";
  5. type: Ctrl + D (hold CTRL and press D). We must return to the Linux shell.
  6. run: service start tomcat
  7. Go to the page manage 3.2 webapp and give the password to the e-mail server in

  Please let me know what happens. Thank you.

  Post edited by: Dave Briccetti
  Noted that it was version 3.0 where the change was introduced. The error reported here affects only the migration of 2.3.2.