Log Insight (v3.0.1) Linux Agent Install on VCSA v6?

Similar Questions

• Try to collect events to a log file and the Agent installed Linux and work - need help.

  I modified liagent.ini by documentation... If I understand well it... actually I changed so many times my eyes hurt.

  Here it is:

  ; Configuration of the Agent of VMware Log Insight. Please save it in UTF-8 format if you use non-ASCII names / values!

  ; The actual configuration is this file that is associated with the server settings to form animal - effective .ini

  ; Note: The agent is not necessary to restart after making a configuration change

  ; Note: It may be more efficient to configure Server Agents page!

  [Server]

  hostname = 192.168.88.89

  ; Name of host or IP of your Server Log Insight / load balancing cluster. By default:

  ; hostname = LOGINSIGHT

  ; Protocol can be cfapi (Log Insight REST API), syslog. By default:

  proto = cfapi

  ; Server port connect Insight to connect to you. Default ports for protocols (TCP all):

  ; syslog: 514; syslog with ssl: 6514; cfapi: 9000; cfapi with ssl: 9543. By default:

  port = 9000

  ; Use SSL. By default:

  SSL = no.

  ; Example of configuration with the certification authority:

  ; SSL = yes

  ; ssl_ca_path=/etc/PKI/TLS/certs/CA.PEM

  ; Time in minutes to force the reconnection to the server.

  ; This option reduces the imbalances caused by the long lifetime as TCP connections. By default:

  Reconnect = 30

  [record]

  ; Logging detail level: 0 (no debug messages), 1 (essentials), 2 (verbose with more impact on performance).

  ; This option should always be 0 in normal conditions. By default:

  debug_level = 1

  [storage]

  ; Local max storage expiration (data + logs) in the valid range MBs.: 100-2000 MB.

  max_disk_buffer = 2000

  ; Uncomment the appropriate section to collect log files

  ; The recommended method is to activate the content pack Linux server LI

  [filelog | bro]

  Directory = / data/bro/newspapers/2015-03-04

  ; include = * .log

  parser = auto

  
  

  
  

  I post it here, I have created a support pack?

  
  

  Post edited by: I added a screenshot of the status of the personnel of kevinkeeneyjr

  Post edited by: kevinkeeneyjr added liagent.ini

  Ah! Yes, the agent is to collect real-time events. If no new event is written then it won't work. If you want to collect logs that have been generated before you use the importer of Log insight which was published with LI 3.3. I hope this helps!

• What happens in newspapers if the Log Insight Server is down or if the agent Log Insight Windows isn't able to commmunicate with Insight Server logs

  If the agent Log Insight Windows is not able to communicate with the Insight logs server because of a network problem or Log Insight Server is down, what will happen in the logs on the computer monitors which agent?

  Are newspapers sent again to the server where it didn't the last time?

  Is the frequency at which the windows agent sends the data to the server? Is - that, as soon as the agent believes that any changes in the log files, it is followed are sent or any interval of time is used by the agent.

  And what is the amount(size) of the data windows agent sends to the server by calling?
  

  
  

  Thanks in advance.
  

  Kind regards

  Mohan G

  1.) agent implements cache storage - default to 200 MB, but can be increased up to 2 GB. Once the cache is full, the agent will drop newspapers.

  (2.) all that is in the cache is sent

  3.) very close in real time and similar to other agents of syslog. Some batches is low, more the cfapi sends the compressed events

  4.) for cfapi depends on, but less than syslog. For syslog, identical to syslog so typically around 170 to 200 bytes. If you are looking for bandwidth calculation see: http://sflanders.net/2014/08/20/log-insight-calculator/

• Log Insight Agent Compression application

  I'm sure that the answer is, but if someone can confirm is it possible to disable compression Log Insight?

  No, it is not possible to disable compacting today.

• Help - LI running, but get Apache2 Ubuntu default page while trying to access the Web interface of log insight

  Hello

  I installed the Log Insight 2.5 VM via vCenter Server ESXi 5, 5. I was able to deploy the virtual computer successfully and you can see the network through VAPP Options settings. (Attached picture - TIME settings).

  Question:

  Unable to access LI web Interface. While trying to access the Web interface, I get 'Apache2 Ubuntu by default Page' (img attachment). Insight of the newspaper runs and opens the web application on port 80.

  Newspapers, controlled far-

  status of /etc/init.d/loginsight

  Open a session running Insight

  Attached image Loginsight2-DURATION - file /storage/core/loginsight/var/runtime.log

  # sh li - cassandra.sh - status

  SH: li-cassandra-sh: not found

  Check if the tcp 80 port is open through the netstat command. Yes, it is open.

  Telnet on port 80, it says connection and crashes. Image attached - telnet-LI

  Able to ping the IP address successfully.

  How can I check http logs on console LI?

  I would really appreciate response to this soon. I'm working on installation LI for more than a week and struggling to get through this way.

  Thank you

  Radhika

  I believe that you with the configuration, but I tell you that the configured IP address and the IP you hit in your browser are not still the same IP, Log Insight does not work on Ubuntu, so you hit another system. To prove this, connect you to the console of the Insight newspaper and run:

  # cat/etc/SuSE - release

  SUSE Linux Enterprise Server 11 (x86_64)

  VERSION = 11

  PATCHLEVEL = 2

  You will see that you are running SuSE to see a Ubuntu screen tells me that you have an IP address duplicate in your environment and you hit a node that is not an Insight newspaper. I hope this helps!

• Get windows message could not connect to windows all the service of user agent install.

  Unable to connect to a windows service. Windows could not connect to windows all the service of user agent install. This prevents standard users to log on.
  As long as administrator, you can go through the system event log to see why the service did not respond. I don't know how to look at the newspaper and how to solve the problem if I do.

  Hello

  (1) did you make any changes before the show?

  (2) when exactly you get the error message?

  (3) you are able to connect to the desktop computer?

  Method 1: check if all windows users install agent service is started.

  a. press theWindows key + R, type services.mscand press ENTER.

  b. search service namedWindows user all install service agent.

  c. Windows user all install service agent must behandwritten.

  d. check if it is started, otherwise do a right-click on the service and clickStart.

  Method 2: Troubleshooting maintenance system to operate.

  a. press theStart button on the keyboard.

  b. click Control Panel.

  c. typeTroubleshooting in the 'search' tab, and press enter.

  d. clickshow all on the left panel.

  e. clickSystem Maintenance, new window will appear.

  f. follow the instructions on the screen.

  Method 3: run System File Checker Scan to fix the problem with missing or damaged files.

  a. press the Windows key + X, and then click command prompt.

  b. type the command:sfc/scannow , and then press on Enter.

  c. restart the computer and check.

  Note: The tool (SFC.exe) System File Checker scans missing or system corrupted files and repairs them.

  You can check the link for more information.

  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  Disclaimer clause.

  The data available on bad sectors may be lost when chkdsk attempts to repair your hard drive.

  Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• Log Insight event channel - default behavior record

  Once a Windows Server has an Agent Insight of the journal deployed and configured and the system, Application and safety chains are monitored it sends all events generated on the server to Log Insight?  My guess is Yes, but for some events generated on the server I can't find in a search on the server Insight journal.

  As Marc mentioned, it's all by default. If you believe that the e-mail are missing, take a look at the page/admin/agents to see if the drops are reported.

• Log Insight 3.3 shows several entries host consuming licenses - can I clean it?

  Hi all

  So I installed the Log Insight 3.3 for vCenter and it helped me to set up log shipping. Everything works well except two things:

  1. Duplicate hosts (see below) consume all my OSI licenses. Anyone know how I can clean one of the entries? (Of course, I can add FQDN ESXi host name if this is useful and supported)
  2. 5.5 ESXi hosts are not in list host - configuration double checked and restarted syslog. Possible due licenses OSI are consumed by the host entries a copy?

  Release notes:

  The host table can display devices more than once.
  The host table can display devices more than once with each in different formats, including a combination of IP address, hostname and domain FULL name. For example, a device called foo.bar.com may appear as foo and foo.bar.com.
  The host table uses the host name field that is defined in the syslog RFC. If an event sent by a device via the syslog Protocol does not have a host name, vRealize Log Insight uses the source under the host name. This can cause the device being listed repeatedly as vRealize Insight Log cannot determine if the two formats are pointing to the same device.

  Advice would be much appreciated.

  Thank you

  # 1 there is no way manually clear entries - for/admin/hosts the entry will be deleted once that all data from this host spun on (i.e. based on the retention period), for/admin/license if you click the question mark next to medium active HMOs, it says "The average County OSI active is the daily average number of hosts sending events to Log Insight." the big question is why are you seeing duplicates? Duplicates saw if DNS front AND rear are or are not configured correctly. Duplicates can also result in malformed syslog events.

  # 2, the question is not duplicated OSI - if this does not work, it means that something is wrong. It could be the network report including DNS resolution on the ESXi host or network firewall configuration (no configuration host firewall). You'll probably want to connect to and 5.5 ESXI host and check things like syslog configuration validation, confirming the network connectivity to LI, confirming DNS resolution to the syslog destination is work, etc..

  I hope this helps!

• Want to access the text file of ODI linux machine installed on windows

  Hi all
  
  I want to access the text file of ODI linux machine installed on windows computers.
  To do this, I created the server data files (physical schema) and;
  
  Host(Data Sever): IP address of the linux machine
  User: user of linux machine name
  Password: data
  
  Directory: / hyperian/Oracle/Middleware/user_projects/epmsystem1/EssbaseServer/essbaseserver1 / * application *.
  I shared the folder app in linux machine.
  When you try to run the interface using this file inside the folder app, its giving below error
  
  
  7000: null: java.sql.SQLException: file not found: /hyperian/Oracle/Middleware/user_projects/epmsystem1/EssbaseServer/essbaseserver1/app/STORAGE.csv
  java.sql.SQLException: file not found: / hyperian/Oracle/Middleware/user_projects/epmsystem1/EssbaseServer/essbaseserver1 /app/STORAGE.csv
  
  to com.sunopsis.jdbc.driver.file.x. < init > (x.java)
  
  at com.sunopsis.jdbc.driver.file.d.b.d.a (d.java)
  
  at com.sunopsis.jdbc.driver.file.g.a (g.java)
  
  at com.sunopsis.jdbc.driver.file.w.executeQuery (w.java)
  
  at com.sunopsis.sql.SnpsQuery.executeQuery (SnpsQuery.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt (SnpSessTaskSqlC.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep (SnpSessStep.java)
  
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession (SnpSession.java)
  
  at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand (DwgCommandSession.java)
  
  at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
  
  at com.sunopsis.dwg.cmd.e.k (e.java)
  
  at com.sunopsis.dwg.cmd.g.A (g.java)
  
  at com.sunopsis.dwg.cmd.e.run (e.java)
  
  at java.lang.Thread.run (unknown Source)
  
  
  One faces this question erlier? then helpme out.

  Hello

  1. If your files are located on a remote file system, you will need to copy one of your files to the computer that Designer ODI runs to allow ODI retrieve the metadata of the file information.
  2. in the topology to create a physical schema, the directory you enter data and the scheme of work must point to this local file.
  3. then set the file data store in the designer of the ODI. Enter a name, browse and select the file and fill each deposited the files tab.

  * If it's a fixed file, click on the network icon in the column into the columns tab and have checked auto adjustment.
  * If it is a delimited file, use the reverse button on the columns tab to reverse the columns.
  * Right-click on the Datastore folder select View Data, if you can view the data, which means that store file data has been correctly set.
  * If this is not the case, check each tab of the database file to make sure that everything is set correctly and try again.

  4. once the display data to be successful, now change you directories (data and the scheme of work in topology) to point to the remote file system. These directories must be accessible to the ODI Agent that will be used to perform transformations. The directory can be an absolute path (m:/public/data/files) or a parent in the ODI Agent startup directory (.. files/demo /). It is strongly recommended to use a UNC (regardless of the location of execution) name for the path. Executing transformations "agentless", the directory is relative to the directory where Oracle Data Integrator was installed.

  You must have an agent process running on the system that contains your source file.
  Then during the race, the odi interface choose this agent.

  Thank you
  Fati

• I have the acer aspire e1 - 510 with linux, how to remove linux and install windows?

  I have the acer aspire e1 - 510 with linux, how to remove linux and install windows?

  You can buy or download a copy retail Microsoft windows and install it on your computer.

  You can download and install the device driver windows for your computer to Acer support website.

• Vcenter 6 - integration vRealize Log Insight user access rights

  Good afternoon.

  I'm to deploy the solution to the latest version of vRealize log Insight. In my work asked me if I could create a user account only to integrate Vcenter vRealize Log Insight that wasn't the root of vCenter. Search for documentation, I found information on this subject. Also important to remember that this account will collect newspapers of my hundreds of ESXI.

  In the image below:

  

  It is a demonstration of the integration that I made using the default account with root access to Vcenter.

  You must provide credentials user with the following privileges:

  System.View

  Host.Configuration.Advanced settings

  Firewall and Host.Configuration.Security profile

  For more information you can consult the official documentation:

  Configure vRealize Log Insight to be learned from the events, tasks and alarms of vCenter Server Instance

  Configure an ESXi host to events of the journal before to vRealize Insight journal

• Log Insight 3.0 integrated Load Balancer application

  So I have a cluster of Log Insight of three nodes and active integrated load balancer entered the IP address and domain FULL that my clients are pointing to. Everything is good so far.

  I'd like to understand how balance really works, i.e. If one of the nodes becomes unavailable id still wait to be able to ping the address of the ILB?  the behavouir can I see at the moment is when the master is down so is the address of the ILB, is - this planned?

  Yes if your IP ILB was linked to the master, when he went to bed, the ILB IP is supported by another node, which explains why the ingestion continues. Which means that you can ping the IP, but if you access the UI through the VIP it tries to go to the user interface of the master master having died the user interface is not available.

• Cluster log Insight issue

  Is a node of Cluster of Insight of journal supported / two possible?

  No. 2 nodes are not supported, it makes the database very unhappy. If its 3 or 1 (stand-alone node) or multiple nodes.

  More information here - VMware vRealize Log Insight

• Log Insight 3.0.0 - 3021606 adding extra storage

  Documentation round add to other storage insight journal is not exactly clear, "you increase storage space by adding a new virtual disk to the Log Insight virtual appliance." You can add as many records as you need, and your environment allows "I don't think it's quite true, I read somewhere that a maximum of 2 TB can be added to a Log Insight device by adding an extra disk/s and is not increasing the current disc, can anyone confirm?

  The link to the doc on the subject is here - VMware vRealize Log Insight

• The upgrade of Log Insight affect alerts?

  I just wanted to check that the upgrade of Log Insight 2 to 2.5 to 3 should not break alert person? I guess that will not work during the downtime for the master, but no doubt they should all live and work after upgrades?

  Thank you

  Mark

  Fix!