The upgrade of my Inspiron CPU

Similar Questions

• The upgrade of an Inspiron 5348 Windows 10

  Hello, just over a year, we bought a 5348 Inspiron with Windows 8.1 down here in New Zealand. It was OK for a few months and one day I totally messed up because I decided to follow the instructions and update Windows - BIG MISTAKE. The computer was completely messed up. I got help from Dell (Asia-Pacific I guess) at the time, but ultimately confused with reinstalling Windows 8.1 using the Dell recovery program. Dell advice was to reinstall windows and update only once and never again (which seemed strange to me). Anyway, it has been fine since then (without updating).

  My question is about the update of Windows 10 - is this going to be a problem with the Inspiron 5348 which has not been updated in the month? I don't have the notice asking me to update Windows 10 that I've heard, maybe because I did not update since the big problem I've had months ago.

  So I don't forget to try to upgrade to Windows 10? Or would it really an improvement or 8.1 Windows which seems to be rather unstable?

  Cheers, Paul

  pogsinnz

  ... snip...

  I watched videos of introduction 10 Windows and he looks pretty good / easy to use. I wonder what are the problems likely to use Windows 10 compared to 8.1 Windows

  Cheers, Paul

  I have no problem at all. I'm delighted with my upgrade to win 10. You should be as lucky as me, however, to get a perfect, almost experience judging by messages others have fact. If it's not perfect right from the start, could be that you are in trouble. Therefore, to make these images. Win 10 will have its own built-in back capacity, which works usually - but sometimes that fails too, I read. Create your own! Follow Dell article I posted update drivers both before & after the upgrade...

  http://www.Dell.com/support/article/us/en/19/SLN297955#system-support-matrix

  How not to not upgrade Windows 10

  I went to read messages about it while the upgrade sat in Windows Update (or anywhere where that put it). I told you to wait - call back me later - fully intending to try, after having two images & a clone of 8.1 to win. When I got home, I was a little sick at heart, on the complaints I had read. I do not know now if I clicked accidentally something to start or he started alone - but after about 4 automatic restarts for maybe two hours - everything was fine. I'm thrilled!

  I've lost any ability or the file I had to 8.1 win, I see. Some screens of settings are hard to find, but who has always been so. Things are as quick as ever. Maybe McAfee ceased to update its definitions because of the upgrade. I uninstalled & put my trust in Defender & firewall Windows, which are impressive, especially the firewall. Some very painful events left the observer of events, but news are that someday I'm going to study. But less/nothing is having me worry more material than in Win 8.1, although concern was probably wrong. Event Viewer errors are often false. I have no problem in Win 10 that I did not win 8.1, which was not much. The two 'SFC/scannow' & DISM still declare no error.

  Win 10, we can stop is no longer always the critical updates to enter through Windows Update. So, I hope that your problem is over. You can prevent updates to driver, but it is better, when he didn't need to. I did not personally a.

  I am delighted with Win 10, generation 10240. I hope that's what you will receive, because, finally, I read a news - threshold 2 or Version 1511 - has been withdrawn. It is problematic. I'm going to only when offered through Windows Update, when I trust that bugs are fixed. I have a new series of images & a clone by hand, however.

• Since the upgrade to Sierra - my CPU runs hot

  Recently, I used the app store to upgrade my MacBook Pro for OSX Sierra.

  From this point forward - my laptop is very hot and fans constantly run like a Jet engine.

  I see this in the activity monitor:

  

  I put all my contacts to synchronize hourly, and nothing has changed before the upgrade and after.

  How can I fix it? My life of the battery is to be purged, permanently.

  Any help appreciated.

  Thank you

  Amit

  Director general of Tallyfy - cloud-based process management

  Try restarting in safe mode (hold down the SHIFT key while booting). The problem persists?

• Vista will have to reinstall if the upgrade card motherboard and CPU?

  So I'm wanting to upgrade my computer and I can't find a clear answer, if when I install a new one, a motherboard and CPU, but with the same RAM and the hard drive and the motherboard did not fail, I need a new installation of windows?

  So I'm wanting to upgrade my computer and I can't find a clear answer, if when I install a new one, a motherboard and CPU, but with the same RAM and the hard drive and the motherboard did not fail, I need a new installation of windows?

  Hé Fatah

  If vista came preinatalled your computer, it is rated an oem license as such is related to the material that it is initially installed on

  If you have a retail license, you can upgrade your card motherboard and CPU

  you will probably have to reinstall vista while the hard drive with the existing vista installation contains the drivers for the old motherboard and probably do not start correctly

  Walter, the time zone traveller

• The upgrade disk hard inspiron 1520

  I would spend my hard drive to a 7200, but I was wondering if my inspiron 1520 support Sata-300, or should I take a sata-150. The reason why I want to upgrade is that I have use multiple VMWares on the same machine and do a lot of multiprocessing.

  Also, I was wondering what it does to my contract of den of accidental damage, what happens if I bought the hard drive from a 3rd party vendor?

  Thank you

  
  

• Impossible to activate Windows after the upgrade card motherboard and CPU.

  replacing a motherboard with windows xp

  I have an OEM of Windows XP version on my computer. I'm updating the card CPU and mother. To run when I try to start Windows he wants me to activate. I tried to use the code activation and as expected, it failed. I called Microsoft and the best answer they had was to go to this forum. If you stand long enough on the automatic activation system a person live lights?

  Can say you a thing OEM = Original Equipment Manufacturer., short IN the license is related to a material of machines.  When you change hardware OEM license will not work.

• THE UPGRADE OF MY INSPIRON 620 FULL TOWER

  so I will order a new graphics card. Accompanies the Sapphire radeon 5670 AMD. I read it is a graphics without danger, but the tower is a 300w power supply. I want to spend at least a system 600w power. my questions are so

  1. what brand of power supply do you recommend?

  2. what should I improve anything else?

  in case I should need to update other elements, I would like to know if I can add to the list.

  Hi Kmorillo,

  Power brands: eVGA and XFX Corsair are good.  They all played very well and were long, my experience with them (and have the same OEM - Seasonic - if I remember correctly).  If you want to save yourself some headaches of cable management I would say get one that is modular, in this way, you don't have to connect the cables that you don't need.

  I hope this helps!

• Question: Does have an Inspiron E1505 and want to know about the upgrade for Inspiron 1525

  Hi, I and Inspiron E1505 and I was wondering how much it would cost to upgrade to an Inspiron 1525 comparable.  The 1525 is replacement of the E1505 is not it?  My E1505 has Vista with a CPU T7200, 2GB of RAM, 120GB HD, built in WiFi G Intel, Mobility Radeon X 1400, upgraded Sound Blaster Audigy.

  I can't remember the price of precisley, but it was about $1,200.  As I said, I want to upgrade to an Inspiron 1525 comparable.  What kind of trade option does Dell give for something like that?  Thanks in advance!

  
  

• HP DV7-3063cl laptop PC: what is the maximum temperature for safe operation of the DV7 3063 cl with the upgrade of the 640 M CPU?

  I have recently restored a HP DV7 3063 cl laptop that died a hot mother (MB). I replaced the MB with a new Board of Directors of HP when the price has been reduced to $100, updated the CPU with an announced as new AMD 640 M and applied Arctic Silver on CPU and graphics chips. I put in 4 G memory cool, got the computer to work and installed Windows 10.

  The computer seems to run very hot and stopped twice from overheating during its first period of 2 weeks when it there was not a lot of calculating, fan was run at top speed at all times, and the laptop was high to allow good airflow below.

  According to the program of the Open Hardware Monitor, the CPU had reached 97-99 C a few times. I bought support cooling a player and that seems to help a lot, dropping the temperature to 20 ° C.

  What is the maximum temperature for safe operation of the DV7 with the upgrade of the 640 M CPU?

  Anything more than 90 c is too hot. You can specify the processor and the motherboard you have installed?

  Also if this from the Manual:

  Thermal paste is used on 1 CPU and heat sink section 2 that the services it. Thermal pads are used on the chip Northbridge 3 and 4, the graphical subsystem chip 5 contact Northbridge and graphics/heatsink contact 6. Thermal material replacement is included with all kits of spare parts of processor, heatsink and system board.

  So unless you have changed the cooling system to heat composed on the chip graphic you should have used a thermal buffer. Without the pad, it may leave just a small hallway and destroy the cooling properties. You can use a shim in copper or other piece of something metal to fill the void, but if you just put the heat sink down on the video chip you won't get optimal even with thermal cooling paste.

• HI PLZ I WANT TO HELP THE UPGRADE TO SSD ODNT WILL I KNOW IF MY BOARD OF DIRECTORS AND THE CPU SUPPORTS

  HI PLZ I WANT TO HELP THE UPGRADE TO SSD ODNT WILL I KNOW IF MY BOARD OF DIRECTORS AND THE CPU SUPPORTS

  MODEL

  Compaq Presario CQ42-372TU computer laptop

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay/?javax.portlet.begCac=...

  PLZ ANY BODY HELP ME

  You can upgrade to an SSD.

  The simplest method is to use an SSD as the Corsair Force 3 and don't forget that you buy the kit of migration.

  The migration kit comes with cloning software and a usb to SATA power cable that connects again SSD.

  It is recommended that you purchase and SSD that is approximately 256 GB in quality if you can find one that is affordable.

  SSD with migration in a kit options search I did.

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The upgrade of Inspiron 9400

  I have an Inspiron 9400 with 60 GB HDD & Windows XP. I plan to upgrade the hard drive of 320, & install Windows 7 and possibly Windows 10.  I was assured by the Dell technical support that my Inspiron works with Windows XP or Vista. I already ran Rebecca Linux Mint 32-bit from the DVD without any apparent problem. My question is, I can actually install Win 7, or should I switch to Linux? Windows XP gets worse & worse! I held account install Win 7 on a bootable usb hdd to test this point.

  donbaja

  You can read about the upgrade of the Dell Inspiron 9400 laptop to either a 32-bit version of Win 7 & Win 8.1, HERE:

  http://dellwindowsreinstallationguide.com/driver-sets/Inspiron-Laptops-Windows-7/Inspiron-9400-Windows-7-32-bit/

  Bev.

• "Dell Backup and Recovery" asking the upgrade with the inspiron 15 model

  Hello

  I'm new to this forum and also started to use the Dell laptop. I bought Dell Inspiron 15 (model 3521) 01-Jan-2014. I am trying to take backup of my laptop on a DVD. When I clicked on 'Backup and restore of Dell' app in app Manager. I try to click on backup system option 'Dell backup and recovery' section, its upgrade premium or enter key. Its not that allows to create backup DVDs.

  What may be the issue? Because when I bought it, seller said that his original one.

  It's part a scam from Dell.  I've got 5 Dell portable computers/computers / tables all have this software on it with a VERY limited useage then weekly or if I get a pop window op offering the upgrade at a special price which, in the end, is the same price as if you would have just bought or 'improved' (like Dell likes to call it) the program to a regular price which IS : 39.99.

  What I hate about businesses, in particular, the one that I spend a lot of money with it, is when they think they can put a quick access on me or in my case 5 times that I have 5 of these upgrade special offer windows popping up each week.

  You're better off getting programs like Goodsync which will back up your computer or synchronize your files on an external hard drive, and that you can use on all of your computers for only $29.99.  I use it on my servers and my offices.

  Otherwise good luck with Dell and their implementation to special day called 'offer' that is the price of retail, after all.  NOT COOL DELL ALL!

• Said Dell Inspiron 7537 is tested on Windows 10 but the upgrade fails - black screen

  Hello all, Hello support,

  Dell Backup software and restore proposed to me that I have upgraded to Windows 10. I like this idea.

  I checked my ultrabook on the DELL Web site. Inspiron 7537 is tested (proudly said Dell) so I should be able to update my OS without flaw.

  I did 2 upgrade to Windows 10 attempts, both failed in the same way.

  It passes through several stages, but at some point, a black screen stuck and only power OFF button turns the laptop computer do something (disable). In the two attempts after 2 restarts, the installation process is back from my Windows 8.1 operating system

  Why DELL say it is tested and I can't upgrade - turns-does not work.

  I have not contacted the DELL forums on this subject (because the DELL technical support in my country told me it is Microsoft Business) If IT WAS NOT for THE FACT that DELL 'advertising' me Windows 10 and claims my laptop is ready to do the upgrade.

  Please help and explain.

  Thank you in advance.

  Martin

  Update your UEFI BIOS to revision A13 and then try again:

  http://downloads.Dell.com/FOLDER03073347M/1/7537A13.exe

• The upgrade of Inspiron 9300 Hard Drive not recognized

  I bought an upgrade of my Inspiron 9300 laptop hard drive:

  Old hard drive: TG754 Hard Drive, 60G, 9.5 MM, 7.2 K Hitachi, Moraga, unleaded

  New hard drive: 250 GB SATA 3 Gb s hard drive 16 MB 7200 RPM 2.5 IN. w o free fall Scorpio black

  TG754

  Hard drive, 60G, 9.5 MM, Hitachi 7.2 K, Moraga, unleaded

  I don't know I installed it correct (just slide in and screw it) but my problem is that my laptop does not recognize the new drive.  When starting it complains that no hard drive is, and when I boot my Windows XP it also said that no hard drive is located.

  I followed the upgrade recommended Dell so I do not know why it does not work.  I read that the SATA drives require additional drivers, but I'm sure that my old drive was already a SATA drive, so I don't understand why he is not recognized.

  Help, please.  Thank you.

  The 9300 has been performed in two versions - the vast majority were EIDE.  The last execution of production used SATA.  Yours is EIDE.

  Readers are physically the same size and made the same carrier - but does not connect the SATA version to the motherboard (check the back both discs and you'll see why).

  The EIDE version has a limit of 120G BIOS - it means not that you can not use this drive of 160 G, but the results can be unpredictable, sudden loss of all data.  Keep backups if you try a 160 - it is much safer to use a 120G.

  No, a 5400 all else equal will be slower than a 7200 - but you don't have a choice, because all manufacturers have stopped making 7200 RPM EIDE (PATA) computer laptop some time ago.