The upgrade of my Mini

Similar Questions

• the upgrade of Mac mini from 8 GB to 16 GB

  I'm looking to upgrade this Mac Mini, 16 GB

  Apple Mac mini 2.8GHz/8GB/1TB i5 Dual-core Fusion/Iris Graphics (MGEQ2HN/A).

  Where can I order online and get updated directly when purchasing?

  # The only Minis with the Iris graphics are the Minis 2014 and all Minis 2014 have their RAM welded in place and it is not extensible.

• The upgrade of Data Miner Repository

  After upgrading to version 4.01 of the SQL Developer, when I shot a take-off Data Miner, he immediately asked if I want to upgrade the database minor.

  If I do this, will allow users of the former 4.0.0 release always be able to use their version of Data Miner?

  The Data Miner client needs to connect to a compatible repository, and there's just one by db.

  And all users that connect to the 4.0.1 repository will need to use the 4.0.1 client.

  Thank you, Mark

• My iPad mini asks for a password after the upgrade to iOS 9.3, but no password was put on the device. What is the solution?

  My iPad mini asks for a password after the upgrade to iOS 9.3, but no password was put on the device. What is the solution?

  I guess it is asking you to CREATE an access code. You can disable it later.

• After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• I am considering the OS upgrade for my mini Cougar (OS x 10.8) to El Capitan

  I plan the OS upgrade for my mini Cougar (OS x 10.8) to El Capitan (OSX 10.11) and wished to know whether or not my Adobe Lightroom 5 software is affected. It will still work ok under OS El Capitan? If this is not the case, so what should we do about it?

  Hi Phil4adobe2LR,

  Yes, Lightroom 5 works perfectly on Mac El Capitan except for the attachment I think.

  Kind regards

  Claes

• After the upgrade to 10.11.6, mDNSResponder runs havoc

  Hello

  After the el Capitan to 10.11.6, upgrade my internet connection has been blocked by my ISP because of a flood of packets to multicast from my side.

  I studied using the monitor activity and found that mDNSResponder creates the network traffic with more than 20 MB per minute, and I see also all the lights on my network switches will blink quickly. The problem disappears if I manually kill the process; then it automatically restarts and creates only a few KB per min.

  It is two machines, an iMac and a Powerbook from 2015. Nothing else was changed other than the upgrade.

  So obviously something is wrong.

  Thanks for the resolution!

  W.

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• After the upgrade to El Capitan having problems with the application Mail

  Hello:

  Recently upgraded my Mac mini to El Capitan. Before the upgrade (from Mountain Lion), I got Thunderbird mail application works perfectly access my GMail account and my Hotmail account. Now, I have no problem with Hotmail and Gmail keeps asking for the password to connect to the gmail imap server. I have TBird in my laptop Ubuntu Linux and Windows too and that you have not had any problems like that. Any help to solve this problem is appreciated. Thank you.

  Try this: https://support.google.com/accounts/troubleshooter/3178296?hl=en

• After the upgrade to v26.0 - text in textarea boxes is spread out on the page

  After the upgrade to version 26.0 - I'm on windows XP, all text in textarea boxes spill out of the box and on the page. Text wrapping is disabled.

  It always happens like that: I load a page with a textarea box that contains a lot of text in there. TextWrapping is off. At first, everything seems fine. Then about 3-5 seconds later, the text spills on the scroll bars, then another 2-3 seconds more late as he spills on the page. Sometimes in both directions, usually rollovers to the right.

  Resizing the browser window makes no difference.
  Also using the scroll bars in the text box makes no difference.

  I uploaded a screenshot of the problem here:
  http://studiox.com/LoremIpsum.jpg

  Thanks for the recommendations and help you can provide

  Is it preformatted text? In this case, of course, the overflow should be hidden and do not pour through the window of Firefox.

  When the screen goes haywire, I first think of a graphics card driver incompatibility. Sometimes it is triggered by a change in Firefox, while in other cases, it may be the result of a driver or an OS update. Try to disable the use of hardware acceleration of graphics Firefox to work around the problem.

  the button Firefox orange (or the Tools menu) > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  It will take effect after restarting Firefox. Any difference?

• Failure during the upgrade to El captain

  Hello

  Trier just to run the El captain of my Mac Book Pro late 2008, 500GB, 4 GB upgrade Yosemity.

  After several attempts, I have to capitulate.

  The Message is that the absence during the installation and the options are retry and save the log file.

  Before the upgrade, it worked very well with all the problems.

  Have been looking for solutions and I do not know if the recovery online could help me!

  I don't have a lot of work put in Photo I am very interested with a recovey that saves my work...

  (Yes, I was to stupid to do a backup before the upgrade)

  Any chance of recovering the contents of my HD

  Allan continues

  This could be a missing file that had not resulted in anything until an update.  I had to save and clean install the operating system. I had a similar problem and take mine to the Apple Store to be fixed, it turns out was a broken HD support, who can apparently cause this problem.  You must back up either with Time Machine or external plug your hard drive to another computer and copy the files you want to save. (TimeCapsule is easier), then take it in to be looked at, they can run Diagnostics on the Apple Store.

  See you soon,.

  Adam

• Need help with the upgrade of the WLAN on Satellite Pro 6100 minipci card

  Hello everyone, I desperately tried to update my WIRELESS card on my laptop SP6100, since it was delivered with a card minipci wifi-b, which is not fast enough today. s standards.

  Each piece of the Toshiba official documentation mention the SP6100 has a mini-PCI type 3a slot, so can accommodate two minipci card a type 3a and 3B wifi.
  But unfortunately for me, I discovered the hard way that it is absolutely NOT the case - I was put back by a fortune by buying costs for a type3 intel minipci wifi card, which does NOT at all on the laptop.

  I spent an hour in unnecessary calls to the customer service from Toshiba, that I had to convince PCMCIA certainly isn't the same as miniPCI, and Mini - PCI cards ARE CERTAINLY replaceable by the user. She insisted that she could not be changed by the user of the system, but by toshiba themselves.

  Could someone please please advise me on the type of wifi card that are built with the SP6100 laptops? I think is it AGERE brand, in the form of WLAN minipci card. I know that it IS certainly NOT miniPCI type 3.

  Help, please! Thank you.
  And besides, every place that I tried so far appears only sell type3 miniPCI cards,
  Other types of Mini-PCI cards are available to retail customers?

  Infinite thanks!

  Hello

  You must understand that your model of laptop is quite old and right now the market wasn't available standard b. I'm pretty skeptical that you will be able to use the standard WLAN with G maps due to compatibility issues. On this forum, I founded several threads that people write about the problems of upgrading older models of laptops with the new wireless network cards.

  In my opinion the best solution for you is to use a PCMCIA WLAN card. The installation should be easy and you can use the wireless network with faster data transfer adapter.

• Pavilion x 360: tour of laptop computer during the upgrade to Windows 10 stuck on the hp logo

  I was upgrading the laptop for Windows 10 and after that it restarted, it got stuck on the logo of hp for about 30 min. I turned it off about 3 times and it is still stuck on the hp logo.

  Once the recovery to Win 8 is completed, considering the upgrade to 10, here are some tips:

  > http://support.hp.com/us-en/document/c05195282

  > http://support.hp.com/us-en/document/c04730900

  Make sure all your drivers are updated before moving to 10 - use HP Support Assistant

  Make sure you that all of your software security (AV, firewall, etc.) is uninstalled before upgrading - reinstall the upgrade of the post.

  If you decide to not upgrade, please note that Win 8/8.1 is good OS and will be supported by Microsoft until the year 2023.

• Cannot charge the battery to 100% on X 1 carbon (A 20, 7) after the upgrade to Windows 10

  I apologize if it's buried somewhere on the forum. I searched for hours, really, but did not find anything about exactly that.

  After months of 'Upgrading to Windows 10' pop ups I finally did. On Windows 7, I was able to change my battery to 100% capacity before leaving for a business trip, then change it to the time where I went home. Now I can't find where to do and it won't load no more than 46%. I tried to download the Lenovo power manager that offered a job, but it doesn't have the menu item separate ' Power' as the instructions on the screen. I tried to uninstall the control method battery compatible ACPI Microsoft suggests another position, but that did not help either.

  I have that option after having upgraded my Yoga 2 to 10 Windows Ultrabook. Enegery Manager is still responsible. I just want the same control on my battery on my X 1 as I have on my Yoga. Can someone help me?

  Thanking you in advance,

  Clare

  I'll just throw this out there, no guarantee that your system has the exact configuration than mine or that I completely understand your problem: I have an application of parameters of Lenovo in my Windows menu. in this application of settings, there is a section of the battery, at the end of this section is a battery meter reset. I would start there get your battery threshold.

  I hope this helps.

• No sound through your desktop since the upgrade to OSX10.11.2

  No sound through your desktop since the upgrade to OSX10.11.2

  There are several possible reasons for the release of its failure. Please take each of the following steps that you have not already tried it. Some may not apply to your model. Stop when the problem is resolved.

  Back up all data before making any changes.

  1. start by the steps recommended in this support article. Do not skip any step. It is the starting point for further efforts fix.

  2 make sure that you have an installation fully updated to Mac OS X.

  3. If you have installed an application called 'Own memory' or any other third party software that is supposed to 'clean' or 'purge' memory automatically, remove it according to the instructions of the developer and restart. You should do this even if the software is not causing the problem, because it is useless.

  4. other third party which has been reported to interfere with an audio software includes the "Boom" and "Samsung Kies". If necessary, uninstall instructions of the developer (not not by dragging something in the trash.)

  5. If a device AirPlay is selected for the audio release of iTunes (or other applications via third party software such as "Wing"), deselect it.

  6. launch the application 'Setting up Audio and MIDI' by entering the first letters of his name in a Spotlight search and by selecting it in the results (it should be at the top). Select output integrated in the list on the left. If the mute boxes are checked, then.

  7. If a red light is visible in the port of audio when its must play, the internal switch is stuck in the position of the digital display. You may be able to release it by inserting and removing of a mini stereo plug of adequate size. If this is not the case, the machine needs to be repaired. Insert any kind of tool in the port can cause damage that is not covered by the warranty.

  If there is no red light, the switch can always be locked in the position of the helmet. Try to clear the same way.

  8 disconnect all devices wired except the keyboard and mouse, as appropriate. If more than one display is connected, unplug all the extra zeros. Restart and test.

  9. If you have a MacBook Air, turn Bluetooth off and restart.

  10 start in safe mode. Do not open a session; Just restart as usual when the login screen appears. When you do, make sure that the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and the sound does not work.

  11. reset the NVRAM.

  12. Reset the SMC.

  13. triple - click anywhere in the line below on this page to select this option:

  /Library/Preferences/Audio

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  of the contextual menu.*, a file must open with a selected item. Move selected item to the trash. You may be prompted for administrator login password. Restart the computer and empty the trash. Re-create your settings in the sound preferences panel.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  14. reinstall OS X after you back up all data.

  15. an appointment of 'Genius' in an Apple store.

• The upgrade with an SSD

  I plan on migration to an SSD soon. After the upgrade SSD will appear as drive E:? If so, how can I change the C: drive SSD? I use a computer house built, based on the motherboard ASUS P5K - E. The processor is Intel E8400 3.0 GHz. I have 2 GB of RAM. Please ask me for more details if you need it. Thank you!

  If I understand you correctly, you want to change your system so that the first disc (the one where Windows is installed, as well as all your programs) is a new SSD.

  Assuming that the new SSD is at least as large as your current system (c) partition and assuming that there are no other partitions on your current hard drive more (I assume that your current D: is a CD or DVD drive) the right way to achieve your goal would be to do the following:

  • Clone the current C: drive on the SSD drive (preferably, but not necessarily, in an external USB enclosure)
  • Turn off computer
  • Remove the existing computer C: drive
  • Physically install the SSD to the computer (for example, out of the outer shell)
  • Turn on the computer and restart
  • At this point, you can stop (a) or (b) install the old hard drive as a second internal drive or (c) put the old hard drive in the external box.  For one of the last two options, you can use the old hard drive for backup.  I would hold off the coast on the restructuring of the old hard drive for at least a few weeks until you are sure that all cloned correctly.

  If you are not using an external enclosure during the cloning operation (for example, you install the SSD as a secondary internal drive), you MUST shut down the computer WITHOUT REBOOTING and remove the original hard disk before rebooting.  (See, however, notes Anna me at the end of this response.)

  If you want to have the two former players and new internally, be sure to log in using the appropriate connector and set the jumpers to ensure that the SSD is considered to be the main or the "master" drive

  Cloning software

  If you have a Western Digital hard drive, you can get a version of Acronis True Image free of WD (http://support.wdc.com/product/downloaddetail.asp?swid=119) or you can get the software of cloning separately (this is not an exhaustive list and in no particular order, some are free, some not):

  Acronis True Image Home
  EASEUS ToDo Backup
  Paragon Drive Copy or Partition Manager Personal
  Casper
  Norton Ghost

  XXClone

  Macrium Reflect free
  What follows is a very old post of 'Anna' in the Microsoft support newsgroups (the predecessor of "Microsoft Answers", which, in turn, was the predecessor of the current "Microsoft Community."  I edited the message refer only to cloning, rather than "Disc imaging" as well (another method of backup not useful in your situation). Although some details have changed with the new versions of the software, it is always interesting to read:

  Detailed instructions for the use of Acronis True Image leprogramme to clone a hard drive

  Within the framework either of these two backup & recovery process, you are
  dealing with two hard drives - source & destination records say.
  the source is the HARD disk drive you want to save and the destination disk
  is the HARD disk that will be the recipient of the cloned content of the
  source disc or the recipient of the disk image that you create.

  When you use both methods, it is usually best for most users to use a
  drive external HARD as the disk of destination, i.e. the recipient of the cloned
  content of the source diskette or the recipient of the disk image created. This

  
  can be either a USB or Firewire cable or external SATA HARD drive. While the other internal
  HARD drive can also serve as the destination disk, that there is an additional element
  safety in the use of an external HARD drive because this player will normally be
  disconnected the system except for the cloning disk or recovery
  process.

  Here are the step by step instructions for
  by using the Acronis True Image 9 program to clone the content of a HARD disk to
  external HARD disk. (The steps are essentially the same using the latest ATI 10)
  (version):

  1. with two hard drives (source & destination disks) connected, start.
  Ensure that no other storage device, for example, flash drives, ZIP drives, etc.,.
  are connected. It is also probably a good idea to close all programs, you
  may have to work in the shadow - including any antivirus antispyware
  programs - before this disk-to-disk cloning operation.

  2. access to the Acronis True Image 9 program, under "Pick a task", click
  on 'Clone disk '. (In version 10 of ATI, click "manage hard disks" in the)
  "Choose a tool" box, and on the next screen click 'Clone disk').

  3. in the next window "Welcome to the Disk Clone Wizard!", click Next.

  4. in the next window of the "Clone" Mode to select the automatic option (it should
  be the default option selected) and click Next.

  5. on the next window of 'hard drive' Source, ensure that good source
  HDD (disk you duplicate of) was selected (highlight).
  Click Next.

  6. on the next window of 'hard disk of Destination', ensure that good
  destination of HDD (disk you duplicate to) has been selected (even once, click
  to highlight). Click Next.

  7. in the next window, select the option "delete partitions on the.
  destination hard disk. Understand that all data currently on the disk which
  will be that the recipient of the clone will be removed before the disk cloning
  operation. Click Next.

  8. the next window will reflect the disc source and destination. Once again
  confirm that the correct commands have been selected. Click Next.

  9. on the next window, click on the button continue. A message box appears
  which indicates that a restart will be required to undertake the drive cloning
  operation. Click on restart.

  10. the cloning operation will pronounce on reboot. With modern
  components and a medium to high power processor, data transfer rate will
  be in the range of approximately 450 MB/min at 800 MB/min during cloning to
  an external USB HARD disk. much faster when cloning to another internal
  HARD DRIVE.

  11. when the cloning operation has been completed, a message
  indicating the disk cloning process was a success, and ask you to
  Shut down the computer by pressing any key. Do it and unplug your USB
  external HARD disk.

  If, however, the destination drive was another * internal * HARD drive, see the
  NOTE below.

  12 note that cloned content now residing on the external USB HARD drive take
  on the file system of the source drive. For example, if before the
  disk cloning operation your USB external HDD was formatted FAT32 and
  your XP operating system has been formatted to NTFS, the cloned content will be formatted in NTFS.
  There is no need to format the USB external HARD disk before the disk cloning
  operation. Similarly, it is not necessary before the operation of disk cloning
  to format a drive HARD internal if use you a drive HARD internal as the
  destination drive.

  13. the system restore can be performed by cloning the content of the
  data from the external DRIVE for a normal HARD internal disk drive
  process of cloning such drive as described above.

  NOTE: Just another point which should be emphasized with regard the
  the recipient of the clone disk cloning operation would be an another intern
  HARD drive and not a USB cable or Firewire external HARD disk. Immediately after the disk
  cloning of the machine must be decommissioned and the source that HARD drive should
  be disconnected. Boot ONLY on newly cloned drive. CAN I NOT BOOT
  IMMEDIATELY AFTER THE OPERATION OF CLONING WITH TWO CONNECTED DRIVES.
  It is quite possible that in doing so, it is likely to cause future
  starting with the cloned disk problems. Of course there is no problem in this
  area should be a port USB or Firewire EHD be the beneficiary of the clone since
  device is not usually bootable in an XP environment.

  **************************************************************************************************

  LEM:

  As you may know not my previous posts about this issue of cloning/disk-image disk, I am rather partisan passionate about Casper 6 - disk cloning program and highly recommend this comprehensive program for most PC users as a backup tool. (I recognize that this is probably of little interest to the OP because I guess it is concerned primarily or exclusively with cloning just the content of its failure (apparently) HARD drive to a newer HARD disk. And it seems that it may have other problems as well!)

  The reason for this post is in my "NOTE" (quoted above) caveat regarding the sea program. I wanted to mention that one of the main reasons we prefer program Casper to other disk cloning programs (for example, the Acronis one) is that, unlike these other programs Casper completely avoids this potential problem I did reference.

  During the two years since we started working with the Casper drive cloning program we had done (or were involved with) hundreds of disk cloning operations, involving a wide variety of PC brands/models, hard disks (both PATA & SATA), etc. During this time, we have never met a * single * instance of the problem raised. IE a user could clone the contents of his HARD 'source' to another disc * internal * HARD drive and would not (possible) later problem affecting the ability to start the (cloned) destination HARD disk even when the system was booted to the HARD drive with the cloned HARD disk connected source * immediately * after the disk cloning operation.

  Under this scenario the cloned HDD would be obviously treated as a HARD secondary, a drive letter assignment drive of (obviously) other than C:. However, the source disk HARD later disconnect so that would imply the boot * only * the newly cloned HARD drive, this drive would start without incident and be granted the 'normal' C: drive letter assignment.

  In addition, two hard drives must be connected in the system and the user changes the BIOS boot priority setting to accommodate a first start at the cloned disk as HDD will start without incident. And, of course, the ancient source THAT HDD would be then treated by the system as a secondary as HDD should in these circumstances.

  And if the user decides to start at the disk of origin at a later time (for some reason any), the boot of this player would normally occur.

  I thought that the information above might be interesting for you & others.

  Anna