The upgrade of parts on e9220y

Similar Questions

• During the upgrade of vista 64 bit, 7 64 bit process hangs about 2/3 of the way through the last part and I have to reboot that restores Vista.

  7 Windows vista upgrade problem

  During the upgrade of vista 64 bit, 7 64 bit process hangs about 2/3 of the way through the last part and I have to reboot that restores Vista. No idea what could be the cause of the crash?

  Hello

  I suggest you perform the steps in troubleshooting from the following link and check how it works.

  Upgrade stops responding (hangs) at 62% when you upgrade to Windows 7

  Check out the following link for more information about how to upgrade Windows Vista to Windows 7

  Upgrade Windows Vista to Windows 7

• Since the upgrade to 2015 CC and change my site to a paid site, can my customers is more updated of the site through the browser update. When they try, parts and pieces of the site appear and they can see what it takes to update. It's about to make me los

  Since the upgrade to 2015 CC and change my site to a paid site, can my customers is more updated of the site through the browser update. When they try, parts and pieces of the site appear and they can see what it takes to update. It's about to make me lose my client. Help, please.

  We have identified two questions:

  (1) muse implements a markup bad comment, causing in the edition (IBE) browser to display the page properly. Only, this affects IBE and does not affect the published site. The combination of page that causes the bad markup is still TBD.

  (2) IBE does not account for the bad markup that leads to incorrect DOM, leaving IBE unusable.

  We have a fix for IBE (as BC) who is ready to be tested. We will update this thread when the fix is on.

  Sorry for the inconvenience.

  Jason San Jose

• Part of the 'geography name referring to program' of the upgrade process?

  Hi all

  We were upgraded to R12.1.3 and currently in the first iteration.

  When you query the former transaction window workbench Transaction we get,"'the system cannot determine the geographic information for this place and cannot be derived from a tax jurisdiction. Contact your system administrator"error.

  I ran the "geography name program referencing" after getting this error. and that the error has been resolved.

  Advice kindly, 'name geography program SEO ', is it process a part of the upgrade or manually run the program.

  Thank you

  AtulR

  Please see:

  Workbench transaction error: the system cannot determine the geographic information for this place and cannot be derived from a tax jurisdiction (Doc ID 438718.1)

  Form transaction error: interviewing or creating a movement triggers the error: the system cannot determine the geographic information for this place and cannot be derived from a tax jurisdiction. Please contact your system administrator. (Doc ID 1350601.1)

  Problem of referencing name geography: Map_status for a location_id is 'E' in the table HZ_GEO_NAME_REFERENCE_LOG (Doc ID 1368312.1)

  Thank you

  Hussein

• Move the database as part of the Oracle 12 c upgrade files

  Hello

  I read the document upgrade Oracle for the database Oracle 12 c.

  http://docs.Oracle.com/CD/E16655_01/server.121/e17642/upgrade.htm#CHDJJJEE

  Here in DBUA, step 8 says that

  Move database files in the page, select an option:

  • Move database as part of the upgrade files
  • Move the quick recovery as part of the upgrade area

  I wonder why we never need to use this feature to move database files?

  I understand for FRA, it will define just the parameters DB_RECOVERY_FILE_DEST and DB_RECOVERY_FILE_DEST_SIZE parameters to initialize at the new location and size new startup of the new home of Oracle database. But why never use us animated here database files option?

  Thank you

  Delphine

  There is no requirement to move the database as part of the upgrade files. It is simply provided as an option

  HTH
  Srini

• Satellite L550D - cannot match the the part number on the upgrade DVD Toshiba

  When I try to run the Upgade Toshiba DVD he choose manually the model of my laptop and gives me two choises: L550D PSLNJE and L550D PSLNSE.
  My room number, however, starts PSLP8E, which does not quite another.

  Should I just choose one of the two options at random, or do I have to do something that the guide upgrade does not tell me?

  Where you bought your model of laptop (countries) and where you stopped this upgrade of the disks?
  As I can see that your model is European model but two others (you see in the upgrade) is not European models.

• I bought a new computer with Vista last summer from Best Buy with a free upgrade to Windows 7. They said that the upgrade on their part has expired, but I can get the program from Microsoft for $18. If this is true... who should I contact?

  How can I get an upgrade from Vista to Windows 7 without having to pay full price?

  See http://www.microsoft.com/windows/buy/offers/upgrade-option.aspx

  Windows Update has nothing to do with the upgrade of Windows. Please post future questions about the upgrade in this forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads
  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After the upgrade to Firefox 36.0.4, it automatically installed noscript

  After the upgrade to Firefox 36.0.4, it removes all my existing extension of the add-on.
  In addition, 'noscript' has been installed automatically, and there is no way to remove it.
  The add-on "noscript" does not appear in one of the extension add-on for me disable/remove it.

  I tried to add some of the add-on noscript for the module additional noscript will appear in the
  Firefox extension page so that I could remove it, but does not remove the
  original NoScript that comes with Firefox 36.0.4

  If all goes well, there is a way for the user to remove this and is not part of Firefox 36.0.4.
  At least allow the user the options of its use, or delete it.

  Do a clean reinstall and delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.

  • Download the full Firefox installation program and save the file to the desktop
    https://www.Mozilla.org/en-us/Firefox/all/

  If possible to uninstall your current version of Firefox to clean the Windows registry and settings in the security software.

  • Do NOT remove the "personal data" when you uninstall your current version of Firefox, because this will remove all profile folders and you lose personal data such as bookmarks and passwords including data profiles created by other versions of Firefox.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
  • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but do NOT delete personal data when you uninstall Firefox which removes all Firefox profile folders and you lose your data.

  If you keep problems also create a new profile.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• After the upgrade to v10 folders appear, but nothing happens when I click on the folder

  I organize my favorites in all 7 or 8 files. After the upgrade to Firefox v10 a few days ago, I find that the records are still on the list but that it will be will not develop. When I open the bookmarks library and select a record, he mentions the description of sites, but no URL. I tried to restore bookmarks in before the upgrade, but I get message "cannot process the backup file. Fortunately, I also store my favorites in MS OneNote, but I don't want want to re-create if I am likely to lose them again. I also installed the Norton toolbar.

  By adopting a belt and Suspenders approach allows first of all make sure you have everything backed up. Have several copies, is the best way to ensure you have the most relevant and the most recent available.

  • manual backups of existing bookmarks and this BEFORE and after any attempt of restoration, know that restorations replace existing bookmmarks
    • See restore bookmarks from a backup or move them to another computer
  • Make a copy of your profile and put somewhere safe, outside the program paths and the firefox profile (Windows desktop is somewhere appropriate) include all subfolders and files (including copies of backup of bookmarks and bookmarks database itself)
    • See back up and restore the information contained in the profiles of Firefox

  I have not personally noticed reported problems specific to the Firefox 10 updates causing problems with bookmarks. Maybe a few extension you have involved, but whatever the cause you could now have corrupted or old installed bookmarks. If it's a - problem, you can restore your bookarks ok, but if a problem persists, you will need to continue the investigation. If you continue to say daily manual backups that you know that the worst cases, is that you lose only part of a days bookmarking.

• After that the upgrade of my URL bar no longer displays the Protocol.

  After that the upgrade to Firefox 7.0 my URL bar is no longer shows me what protocol is used when you use http port 80. How can I turn this feature on?

  The Protocol (http://) was removed from the URL in the location bar for pages http:// only. https:// pages will always have the Protocol. This can be confusing for some users. There is also a bug known, where if you copy the URL after selection of the awesome bar dropdown (but before loading the page) it does not include the http:// part.

  Users can revert to the old behavior by setting browser.urlbar.trimURLs to false in about: config

  1. type of topic: config in the URL/address bar and press the Enter key
  2. If you see a cautionary, accept it (promise to be careful)
  3. Filter = browser.urlbar.trimURLs
  4. Double-click the pref in the lower panel of toggle it on 'false' OR , do a right-click on the pref in the lower panel, then choose "Toggle" switch it on "false."
  5. close the topic: config tab

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Why can't the upgrade procedure be re-scheduled to warn users BEFORE they upgrade they will lose the additional features they have relied on for years? This isn't a trivial matter - read the other "complaints"!

  For the second time in my experience, an update of Firefox led to a lost feature where the modules are considered incompatible. It is UNACCEPTABLE that the user is not warned prior to this loss. It is immaterial that the Add-ons are third parties: If Firefox can 'discover' the problem AFTER the upgrade, it can warn us BEFORE the upgrade. I love Firefox, but you've already lost one of my sons as a user because of what it sees as a casual disregard for the personal choices of the users. Give us the ability to customize Firefox. Fantastic! Can paralyse us when we innocently do a upgrade. How much more of your user base that you want to lose?

  As a user of long date of Firefox (and Netscape), I tend to agree with you that some type of compatibility check must be done before the real Firefox takes place version upgrade. I never install a new version of Firefox on my previous version. I admit that I'm a more experienced user and generally start to use new versions of Firefox during the beta test period and install the beta version, with a separate profile required, to test the new product and test the compatibility of the add-on. I know that's not possible or convenient for all users.

  The following extension can save you some frustration.

  • It adds an option "Empty list" on the screen Add on
  • It will show compatible Mozilla products and versions for each Extension.
    • I do not believe that the Extensions installed from other sites that the site Mozilla Add - ons are included; you will need to check the site from which you downloaded the Extension or with the developer of the Extension for the updating of the plans for the new version of Firefox.
  • I installed it and I use it as a first step before contacting the developers Extension and or visit their home/forums pages looking for beta versions of their Extensions for new versions of Firefox.
  • This will help you if you do not allow automatic updates of Firefox; most versions of news (e.g., Firefox 3.x of Firefox 4). See:
    • https://support.Mozilla.com/en-us/KB/options%20Window%20-%20Advanced%20panel#w_update-tab

  Extension list Dumper: https://addons.mozilla.org/en-US/firefox/addon/extension-list-dumper/

• FN keys do not work after the upgrade to Windows 10

  Why the FN keyboard does not work after upgrade to Windows 10?

  FN keys are controlled by utilities and special tools of Toshiba. Usually after the upgrade to Windows 10, the parts of the pre-installed Toshiba software must be upgraded to version compatible and support Windows 10...

  You have not provided information on the laptop model so I can't say with certainty if your unit is 10 Windows supported or not...

• X 1 carbon 3rd gen, the upgrade of lcd panel

  Hello

  I have a gen X1c 3rd with the TN FHD-slab. I don't really like this Panel and want to upgrade. What are the options I have, and where can I find parts?

  If possible, I would get the WQHD with touchscreen. Can I install it on my X1c?

  Second option would be to get IPS WQHD no touchscreen.

  Thank you

  Jonte

  om26er wrote:
  You do no more with this? I have exactly the same problem the display X1C TN is simple bad and I'm looking to upgrade with no touchscreen WQHD of. If Yes can you tell what else apart from the LCD screen I need to replace.

  Yes, I did an upgrade. I decided that I really want a touch screen, but these panels are not compatible with the other Assembly parts (display TN).

  Option 1:

  What I did was buy a LCD complete Assembly (WQHD + touch) on ebay opportunity from a gen2 X1C and swapped all including hinges, antenna cables and everything. Each piece is the same, or at least interchangeable, between gen2 & gen3 except for the LED cable.

  Screen + touchscreen is working perfect, but since the LED cable has a different size I can not connect, and so I don't get bluetooth, webcam, microphone, and ambient light sensor. Do not claim any of those personally, so ok for me.

  If anyone know of an adapter that can be used between gen2 and gen3 LED-cable, advice would be gratly appreciated!

  Option 2:

  If you only want to upgrade to an IPS display, you can simply buy the Panel and change in yourself. Bit of a delicate mod however, you have to disassemble the entire LCD screen, and it is maintained by a tape strong enough all way around. But doable...

  I have found no WQHD Panel which can be easily exchanged with the TN slab without changing many others leave. Option 1 and 2 above are probably the only way to go.

  Good luck!

• HP DV7-3063cl laptop PC: what is the maximum temperature for safe operation of the DV7 3063 cl with the upgrade of the 640 M CPU?

  I have recently restored a HP DV7 3063 cl laptop that died a hot mother (MB). I replaced the MB with a new Board of Directors of HP when the price has been reduced to $100, updated the CPU with an announced as new AMD 640 M and applied Arctic Silver on CPU and graphics chips. I put in 4 G memory cool, got the computer to work and installed Windows 10.

  The computer seems to run very hot and stopped twice from overheating during its first period of 2 weeks when it there was not a lot of calculating, fan was run at top speed at all times, and the laptop was high to allow good airflow below.

  According to the program of the Open Hardware Monitor, the CPU had reached 97-99 C a few times. I bought support cooling a player and that seems to help a lot, dropping the temperature to 20 ° C.

  What is the maximum temperature for safe operation of the DV7 with the upgrade of the 640 M CPU?

  Anything more than 90 c is too hot. You can specify the processor and the motherboard you have installed?

  Also if this from the Manual:

  Thermal paste is used on 1 CPU and heat sink section 2 that the services it. Thermal pads are used on the chip Northbridge 3 and 4, the graphical subsystem chip 5 contact Northbridge and graphics/heatsink contact 6. Thermal material replacement is included with all kits of spare parts of processor, heatsink and system board.

  So unless you have changed the cooling system to heat composed on the chip graphic you should have used a thermal buffer. Without the pad, it may leave just a small hallway and destroy the cooling properties. You can use a shim in copper or other piece of something metal to fill the void, but if you just put the heat sink down on the video chip you won't get optimal even with thermal cooling paste.

• Video card: driver Windows 10 required for the video card Part No.: 5188-4289

  Hello

  My computer which is built from individual components suddenly upgraded to windows 10 by himself. Now the screen is not good and I tried to change the settings but, the display is even worse. The graphics card that loaded is Microsoft base display adapter. I don't know the name of the video card in my computer, but it has a sticker that says "HP part No.: 5188-4289. Anyone know the name of the video card and if there is a driver 64 bit Windows 10 for him.

  Thank you two for your attempts to fix my problem. Unfortunately, the driver makes no difference, so I will need to replace the video card.

  I was completely happy with the way my PC has been implemented with Win7. I am not happy with the problems that caused the upgrade to win10. In addition we have all lost so much time, not to mention the expense.