The upgrade to ari 21-23 air

Similar Questions

• Mac book air cannot detect my iPhone 6, after the cable on my I phone 6 to connect with my mac book air, nothing appear on the mac book. Seems like it can't detect the file i phone 6. I want to export my photos and do the upgrade version.

  Hi, after plug the cable on my phone i 6 to connect with my mac book air, nothing appear on the mac book.

  Seems like it can't detect the file i phone 6. I want to export my photos and do the upgrade version.

  Current situation is nothing exportable phone and also cannot do anything mac book because they cannot detect each other. Please advise, thank you.

  You can try to move to a different USB port. And if your just trying to swap photos try Airdrop. Also try to go here If iTunes does not your iPad, iPhone or iPod - Apple SupportHope this help, good luck to you.

• Hello. I buy the Macbook Air Mid 2015... After the upgrade to El Cap internet speed slowed painfully. What should do? Help, please

  Hello. I buy the Macbook Air Mid 2015... After the upgrade to El Cap internet speed slowed painfully. What should do? Help, please

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• I just upgraded from the LR5 LR6 on my Macbook Air to OS 10.9.5. LR5 photos 38K, especially on an SSD connected with 2 years on an internal hard drive, gave a 48 GB LR5 catalog. From LR6, I decided to import all the photos of 38 K stored on my SSD to form

  I just upgraded from the LR5 LR6 on my Macbook Air to OS 10.9.5. LR5 photos 38K, especially on an SSD connected with 2 years on an internal hard drive, gave a 48 GB LR5 catalog. Starting LR6, I decided to import all the photos of 38K stored on my SSD to form the LR6 catalog, but it is now 108 GB. Is he aware would be so much bigger than LR5 LR6 catalog? Should I redo, selecting the LR5 catalog to import to the LR6?

  I don't pretend to re-do an import, I do not import or re - import at all.

  You can delete the catalog Lightroom 6 and his insights that you created. You want to have the Lightroom 6 to upgrade the 5 Lightroom catalog file. Use the file-> open catalog and point to the 5 Lightroom catalog file. Once it is successful, you can also delete or archive the 5 Lightroom Catalog and delete its previews. As a piece of advice, never re - import photos. NEVER, as in... do not, do not, don't go anywhere near it.

  Regarding the size of the preview, you can control this in Lightroom under the catalog tab file management settings.

• Upgrade of a thin macbook air 2010 at El Capitan?  Should I do it?  Thank you!

  Decide to upgrade my Late 2010 Macbook Air to El Capitan.  Photos of all the problems with the migration?

  No problem with anything. See the basic steps for the upgrade of OS X. See also How to prepare your Mac for OS X 10.11 'El Capitan'.

  Upgrade to El Capitan

  You can pass the Lion El Capitan or directly from Snow Leopard. El Capitan can be downloaded for FREE from the Mac App Store.

  To upgrade to El Capitan, you must have Snow Leopard 10.6.8 or installed Lion. Download El Capitan from the App Store. Sign in with your Apple ID. El Capitan is free. The file is big enough, more than 5 GB, allow it some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.

  Mac that can be upgraded to OS X El Capitan

  1 iMac (mid-2007 or newer) - model identifier 7.1 or later

  2 MacBook (late 2008 or early 2009 or newer aluminium) - model identifier 5.1 or later

  3. MacBook Pro (Mid/Late 2007 or newer)- model identifier 3.1 or later version

  4 MacBook Air (late 2008 or newer)- model identifier 2.1 or later

  5 mac mini (early 2009 or newer)- model identifier 3.1 or later version

  6 mac Pro (Early 2008 or newer)- model identifier 3.1 or later version

  7 Xserve (early 2009) - model identifier 3.1 or later version

  To find the identifier of the model open system information in the Utilities folder. It is displayed in the Panel on the right.

  Are my applications?

  See table of application - RoaringApps compatibility

• Major Outlook and timing of the problems after the upgrade of the El Capitan

  On the advice of the Apple support (phone call) I recently upgraded from Yosemite to El Capitan 10.11.6.

  I have many problems. The two largest are (1) stands (2016) Outlook and frequently "must be closed; (2) calendars quickly goes to "not responding" after the launch and shows multiple entries for a single event. Example: I have a class to repeat each week (when I was in Yosemite). Before the upgrade, he showed the event once a week. After the upgrade, it it shows 13452 times the same day. I followed the advice on these topics, but nothing has worked. Similarly the calendars on my iPhone5 freezes as well.

  Hello Steve,.

  Thank you for using communities Support from Apple. I have a problem with your MacBook Air use after update is not what you expect. Based on what you said, it seems you can experience some software related issues, and here's how I recommend refine you and resolve these issues:

  1. first of all, try to run a quick with the disk utility tool test, as this can correct simple problems that you encounter. Then restart normally and retest your problems.

  Disk utility (El Capitan): a disc repair

  2. use Mode without fail to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory. Test mode safe questions, then restart normally and test again.

  Try safe mode if your Mac does not end commissioning
  Graphics performance limited in recovery of OS X or in safe mode

  3. you can find out if unexpected behavior is related to the user file or a parameter in trying to reproduce the problem to a different user account. This process includes creating a new user account, connect to it and test for the issue.

  How to test a question in another account on your Mac.

  See you soon!

• El Capitan Upgrade - not enough of space for the upgrade to Photos

  HI guys.  I just upgraded my MB of 2013 at El Capitan Air, and I'm having an issue update to iPhoto to Photos.  We have the iPhoto on an external hard drive library.  When I try to update library it tells me that there is not enough space.  Of course, the obvious answer, and one that I've read here, is to get a bigger external drive.  But before I spend the $$ to do this, I want to make sure that you understand how the upgrade.  The hard drive on my Mac itself is fairly complete, so if he tries to use somehow * that * as space time to do the upgrade, it won't work even with the biggest external drive.  However, if she only cares about the space on the disk where the iPhoto library sits, a new external drive is the fix.

  Anyone know how it works?  Someone got experience with success the upgrade for the Photos on an external drive when you are main internal drive is full?

  Thanks for your help!

  Mark

  We need details to help

  How much space you have on your Mac? What format is the EHD? How is it connected? What is the exact message that you found?

  LN

• I constantly receive the death spinning beach ball by adding or modifying contacts since the upgrade to El Capitan.

  I did a bit of investigation on it. Here are the facts:

  (1) I use Apple Contacts.app to synchronize with Google contacts.

  (2) I have two computers, a MacBook Air 2013 and an iMac late 2012, the two 10.11.2 running. With respect to the mail, contacts, calendar, etc., they are configured identically.

  (3) I had this problem (among others) for the upgrade on my iMac 2012, so I did a clean install of 10.11.

  (4) this problem occurs ONLY on the iMac (again, same configuration on both machines).

  (5) I removed the plist and all other data in/application Support and restarted several times related to the contacts.app. No dice.

  (6) I repaired disk permissions. No dice.

  Review of the console, this is the error message (followed by multiple attempts failed in the same process)

  25/01/16 2:34:34.000 PM kernel [0]: sandbox: com.apple.Addres (564) deny (1) / private/var/run/mDNSResponder network-outgoing

  My best guess that sandboxing OS x system is denied access to the demon DNS resolver by com.apple.AddressBook service, seeking to talk with Google at any time any changes.

  So here's my question: anyone know how I can ask the system to sandbox of chill out on these queries and continues to deny access to the network? Is there a text file somewhere that I can change to provide permissions for com.apple.AddressBook?

  And also, is it not funky how he's just on a single computer, both with the same configuration in system preferences?

  PS - No firewall is enabled on each machine.

• Engravers Blu - ray Samsung SE - 506 Monte is more after the upgrade of the El Capitan

  Hi all

  MBP, in early 2008, El Capitan 10.11.2...

  My Samsung Portable Blu - ray writer, SE-506CB/RSBD Monte is more after I upgraded to El Capitan, last week.  The drive itself is only a few months old.

  The problem is not the USB ports, like other devices work fine with all the USB ports on my MBP.

  Note that I'm NOT trying to read or write a Blu - ray disc.  I try only to play audio CDs, I've done successfully before the upgrade to El Capitan.

  Someone had this problem?

  Thank you...

  For what it's worth, I have this problem as well.  The drive tray would not eject even with a single cable, so I switched to another.  I could then open the drawer (seems odd for me) but the disc would not rise.  Here's the info from the console log that indicates that the operating system is getting bad feedback from the pilot saying that the disk is defective.  This same drive/cable/disc work very well on my MacBook Air 10.10.5 and had worked perfectly well with this MBP even before the service (and "free" upgrade to EC by Apple).

  Console

  09/01/16 12:34:49.000 kernel [0]: AppleUSB20HubPort@fa130000 011849.735343: AppleUSBHostPort::resetGated: a new attempt to list 100 MS

  09/01/16 12:34:50.000 kernel [0]: AppleUSB20HubPort@fa130000 011850.924723: AppleUSBHostPort::resetGated: a new attempt to enumeration in 200ms

  09/01/16 12:34:51.000 kernel [0]: AppleUSB20HubPort@fa130000 011852.236095: AppleUSBHostPort::resetGated: a new attempt to enumeration in 400 ms

  09/01/16 12:34:52.000 kernel [0]: USBMSC (non-unique) identifier: (Korean characters removed) 0xe8d 1956 0 x 0 x 0, 2

  09/01/16 12:35:10.000 kernel [0]: disk3: alignment error.

  09/01/16 mds 12:35:12.432 [74]: (Volume.Normal:2464) volume: 0x7ffc330a4c00 * initiated creation of occluding a default location: 1 SpotLoc: (null) SpotVerLoc: (null): 0/Volumes/ENTOURAGE

  09/01/16 mds 12:35:12.456 [74]: vsd:0x7ffc33173400 (Volume.Error:577) open failed.  failureCount:0 (null)

  09/01/16 12:35:23.000 kernel [0]: smb_smb_ssnsetup: GROUND does not support extended security, this server will be deprecated in the future!

  09/01/16 mds 12:35:27.471 [74]: context of recycling: 0 (Volume.Normal:166) vsd:0x7ffc33173400 DisabledStore: {}

  DisabledRecycleCount = 1;

  }

  09/01/16 mds 12:35:27.502 [74]: vsd:0x7ffc338c6000 (Volume.Error:577) open failed.  {failureCount:1}

  DisabledRecycleCount = 1;

  }

  09/01/16 mds 12:35:57.502 [74]: (Volume.Normal:166) vsd:0x7ffc338c6000 DisabledStore recycling: 2 context: {}

  DisabledRecycleCount = 2;

  }

  09/01/16 mds 12:35:57.540 [74]: vsd:0x7ffc308c8400 (Volume.Error:577) open failed.  {failureCount:2}

  DisabledRecycleCount = 2;

  }

  The drive works perfectly well with this disc in 10.10.

• No sound through your desktop since the upgrade to OSX10.11.2

  No sound through your desktop since the upgrade to OSX10.11.2

  There are several possible reasons for the release of its failure. Please take each of the following steps that you have not already tried it. Some may not apply to your model. Stop when the problem is resolved.

  Back up all data before making any changes.

  1. start by the steps recommended in this support article. Do not skip any step. It is the starting point for further efforts fix.

  2 make sure that you have an installation fully updated to Mac OS X.

  3. If you have installed an application called 'Own memory' or any other third party software that is supposed to 'clean' or 'purge' memory automatically, remove it according to the instructions of the developer and restart. You should do this even if the software is not causing the problem, because it is useless.

  4. other third party which has been reported to interfere with an audio software includes the "Boom" and "Samsung Kies". If necessary, uninstall instructions of the developer (not not by dragging something in the trash.)

  5. If a device AirPlay is selected for the audio release of iTunes (or other applications via third party software such as "Wing"), deselect it.

  6. launch the application 'Setting up Audio and MIDI' by entering the first letters of his name in a Spotlight search and by selecting it in the results (it should be at the top). Select output integrated in the list on the left. If the mute boxes are checked, then.

  7. If a red light is visible in the port of audio when its must play, the internal switch is stuck in the position of the digital display. You may be able to release it by inserting and removing of a mini stereo plug of adequate size. If this is not the case, the machine needs to be repaired. Insert any kind of tool in the port can cause damage that is not covered by the warranty.

  If there is no red light, the switch can always be locked in the position of the helmet. Try to clear the same way.

  8 disconnect all devices wired except the keyboard and mouse, as appropriate. If more than one display is connected, unplug all the extra zeros. Restart and test.

  9. If you have a MacBook Air, turn Bluetooth off and restart.

  10 start in safe mode. Do not open a session; Just restart as usual when the login screen appears. When you do, make sure that the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and the sound does not work.

  11. reset the NVRAM.

  12. Reset the SMC.

  13. triple - click anywhere in the line below on this page to select this option:

  /Library/Preferences/Audio

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  of the contextual menu.*, a file must open with a selected item. Move selected item to the trash. You may be prompted for administrator login password. Restart the computer and empty the trash. Re-create your settings in the sound preferences panel.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  14. reinstall OS X after you back up all data.

  15. an appointment of 'Genius' in an Apple store.

• Considering the upgrade to Fusion Version 3.1.3 (416484), OS x 10.6.8.  Advice?

  I bought a MacBook Air in 2011, with the latest version of the Fusion.  I installed Windows 7 Ultimate and have never had any problems with it.  Lately, some new apps do not work on the BONE, so I am considering the upgrade to Yosemite or El Capitan.  I am concerned to make my system unstable, and some of the things I read on the blogs on El Capitan and Version 8.0 do not increase my confidence.

  I OS X 10.6.8 and Fusion 3.1.3.  The MacBook Air is the Intel Core Duo 2.13 GhZ processor and 4 GB of RAM.  Can anyone give me some advice regarding the stability of the various upgrades of version for the OS and the merger?  In addition, there are issues related to upgrading the version of merge with Windows 7?  TIA

  You need to upgrade the host operating system - Apple to not support 10.6.8 more, so you are exposed on the net.

  The biggest challenge that you have is that all the new OS versions (i.e. support) really want 8 GB in the machine for a solid performance, so unfortunately, it is a simple minimum configuration for a modern machine.  but because of security issues, an upgrade is always a good idea. You might as well go to 10.11 - the system requirements are the same as 10.9 and 10.10, and there a lot of stability and security bugs.   To make it work OK with 4 GB on that CPU, you'll want to close all other applications before you start merging and stop melting when you use do not.

  Here is the order of the steps, I suggest you:

  (1) make a full clone of the system to an external drive.  Time Machine is not enough, both because on this corruption operating systems silent vintage can slip, and Time Machine is not reliable for the backup of virtual machines at all.  I recommend Carbon Copy Cloner, of www.bombich.com.  Mike is a great guy, and that the software has saved my bacon many countless times.

  (2) stop - no suspend - all your virtual machines.  Delete snapshots, you might (I'm not sure if had Fusion 3 snapshots, but if she did, removed at 100%).

  IMPORTANT: If you use the former FileVault 1 (which is what came with 10.6.8), you MUST disable it before upgrading.  Check system preferences/security/filevault.  If it was turned on, make another clone after deactivation.

  3) upgrade your host operating system.  That will turn off a lot of your software (including Fusion), as incompatible.

  (4) upgrade of all other software including Fusion to the current version.

  (5) start the virtual computer and upgrade the virtual hardware and VMWare tools when you are prompted.

  (6) make sure that the virtual machine has only 1 GB of RAM and 1 core assigned to it if you can.

• The upgrade of CS5 options

  I got PS up to CS5. When tried to open upgrade your mounts have changed and do not know, I understand. I'm a hobbyist who uses PS often for scrapbooking and photographic projects personal I don't need all the features of specialty that some professionals might need. So, what are the options I have for the upgrade? Then if I do not update for CS5 will I encounter problems because of this? I now use on a regular Mac Book pro and the Mac Air. Ideas and suggestions?

  Thank you

  JRD

  Hi pepita70,

  Options being upgraded are:

  You can upgrade to the latest version of Photoshop and Lightroom by joining the Plan of photography CC. https://creative.Adobe.com/plans/photography

  You can switch to Photoshop CS6 (CC-no-membership): http://adobe.ly/10iKEn4

  If you do not upgrade, the system you have now, assuming it works, can continue to work.

  CS5 is not coded for the yet-to-be new OS updates. It is these updates in the future that could potentially break some of the Working Group current feature CS5. In a way - update of the OS at the risk of CS5 to stop working in the future.

  The current versions of CC 2014 then will support all current operating systems.

  Hope this helps,

  Kind regards.

  Pete

• Problems of symbol because of the upgrade RH8

  I am currently on my third (x 5, 7, 8 now) version of HR, and I'm running on the 'typical' problem because of the upgrade. Things looking different, as different and often times causing a ton of extra work.

  One of my biggest problems is the extra space that was added after each dash in existing projects; This only happens when I switch from existing projects to RH8 RH7. Is there a kind of "bypass" this fix? I read somewhere on the installation of the SSL AIR but we use HTML for these projects and have actually deleted all other SSL of the project - is there another method?

  In addition, nobody knows how to do a search/replace massive on code to solve all the problems of dashboard em that I am currently running HTML?

  Any help would be greatly appreciated!

  Hello

  This problem is fixed in RoboHelp 9.

  But if you have already upgraded the RoboHelp 8 project, you can then run the attached script.

  Who will help you recover white space after the symbols from the upgraded project.

  You can download the script from the following location

  https://Acrobat.com/#d=A7p95Ora1aWUW0ZXvR-kGg

  Steps to run the script.

  1. open the upgraded project.

  2. open the pod of the Script Explorer.

  3. import the downloaded script.

  4. run the script.

  Thank you

  Gunjan

  RoboHelp engineering

• Flex components do not work after the upgrade to Flash Builder 4

  I just bought Flash Builder 4 and imported my Flex Builder 3 project. Everything worked except my Flex components that have been created in Flash Professional using the Kit of Compoent Flex may not appear at all in my Flex application. The components have been created in Flash CS3 and published to a CFC. I even tried the upgrade to Flash Professional CS5 and publish again, but that did not help. These components work in Flex Builder 3 with Flex SDK 3.2. Anyone know why they do not appear in Flash Builder 4 with Flex SDK 4.1 and AIR 2.5 SDK? I need to work with AIR SDK 2.5 so I can compile for Android. Thank you, Ryan.

  P.S. when I say that they are not I mean that they are not visible in the currently running application. Flash Builder is find in the good SWC because I instantiate components in my mxml file and it compiles without error. -Ryan

  I downloaded the SWC and looked inside.  It is not related with Flex 4

  version of the FCC.  I think you need to check your configuration.  The CFC

  would have a substantially larger size once you get it right.

• is more able to stream video from some sites after the upgrade to Safari 10

  

  After the upgrade to 10 Safari, I can no longer stream from a certain website. Instead of playing the video stream, I'm prompted to save "player.swf" as shown above.  This problem occurs on el Capitan, and it happens on the Sierra, and it all started when I updated Safari 9.x to 10.0

  Open Safari preferences / Security tab and check the box allow Plug-ins.

  Very soon of Flash player and the plugin will be obsolete and this web page needs to change its code to HTML5.