The URI of the property ID.

Similar Questions

• 11g ws client proxy and Stub does not recognize the property (policy)

  Hello
  
  I did a web service in 11g with a security policy and has been at wls and generate a proxy web service with java oracle.j2ee.ws.tools.wsa.Main - genProxy
  
  When I try to add security in proxy ws client I had this error Stub does not recognize the property: weblogic.wsee.security.wss.CredentialProviderList
  or this javax.xml.rpc.JAXRPCException error: Stub does not recognize the property: weblogic.wsee.security.bst.serverEncryptCert
  
  Without policies, everything works and credProviders has valid values.
  
  Thanks Edwin
  
  Code of WS
  
  @WebService
  @Policy (uri = "policy:Wssp1.2-2007-Wss1.0-UsernameToken-Plain-X509-Basic256.xml")
  
  
  public class CreditCheck2 {}
  
  @WebMethod
  public String echo (String s) {}
  return s;
  }
  }
  
  
  client proxy WS
  
  private nl.ordina.ws.client.CreditCheck2 _port;
  
  Public CreditCheck2PortClient() throws Exception {}
  ServiceFactory factory = new ServiceFactoryImpl();
  _port = ((nl.ordina.ws.client.CreditCheck2Service) factory.loadService (nl.ordina.ws.client.CreditCheck2Service.class)) .getCreditCheck2Port ();
  }
  
  /**
  @param args
  */
  Public Shared Sub main (String [] args) {}
  try {}
  nl.ordina.ws.client.CreditCheck2PortClient myPort = new nl.ordina.ws.client.CreditCheck2PortClient ();
  System.out.println ("calling" + myPort.getEndpoint ());
  
  String username = "weblogic";
  String password = "weblogic";
  
  String clientKeyStore = "d:/oc4jssl.jks";
  String clientKeyStorePass = "Welcome";
  String clientKeyAlias = "oc4jssl";
  String clientKeyPass = "Welcome";
  String serverCertFile = "d:/demoidentity.cer";
  
  
  List CredProviders = new ArrayList();
  X509Certificate serverCert = (X509Certificate), CertUtils.getCertificate (serverCertFile);
  
  CredentialProvider cp = new ClientBSTCredentialProvider (clientKeyStore,
  clientKeyStorePass,
  clientKeyAlias,
  clientKeyPass,
  "JKS"
  serverCert);
  credProviders.add (cp);
  CP = new ClientUNTCredentialProvider (username, password);
  credProviders.add (cp);
  
  Heel heel = myPort._port (heel);
  
  stub._setProperty (WSSecurityContext.CREDENTIAL_PROVIDER_LIST, credProviders);
  stub._setProperty (StubPropertyBSTCredProv.SERVER_ENCRYPT_CERT, CertUtils.getCertificate (serverCertFile));
  
  stub._setProperty (WSSecurityContext.TRUST_MANAGER,
  new TrustManager() {}
  {public boolean certificateCallback (X509Certificate [] string, int validateErr)
  Returns true;
  }
  } );
  
  
  Add your own code here
  
  } catch (Exception ex) {}
  ex.printStackTrace ();
  }
  }

  JDeveloper gives you the opportunity to select the type of proxy you want to generate.
  You have found this exception because you try to use the heel on a proxy of JAX - WS.
  You must either use a JAX - RPC proxy, if you want to use the same code
  OR
  If you want to use JAX - WS proxy, you must change your code for:
  Import javax.xml.ws.BindingProvider;
  :

  Card rc = (port) .getRequestContext ((BindingProvider));
  RC.put (WSSecurityContext.CREDENTIAL_PROVIDER_LIST, credProviders);

  whenever you use something like:

  stub._setProperty (WSSecurityContext.CREDENTIAL_PROVIDER_LIST, credProviders);

  Because your service is JAX - WS, I suggest you create JAX - WS only proxy and change your code and try.
  In the case of JAX - WS, you don't need
  Heel heel = myPort._port (heel);

• My safari has locked up with a request for verification of the property query.  What can be done to fix this?

  My safari has locked up with a request for verification of the property query.  What can be done to fix this?

  

  This is the shit that came.

  Force Quit Safari (cmd-option-esc) then restart Safari by holding down the SHIFT key.

  Sorry, wrong forum... question thought it was an OS X. In any case don't give them any info.

• Loading limits for a dynamic step name using the shipper of the property

  Hello

  I'll have a stage whose name is upadted in a loop based on the index of the loop by using the 'Step.Name' API For this step, I'm trying to load limits using the stage property loader. One reason for the first iteration of the loop works, but for the next iteration, it is unable to load the property lines.

  Can someone help me with this?

  Kind regards

  River

  test the following example

  \Examples\PropertyLoader\LoadingLimits\LimitsFromTextFile\LimitsFromTextFile.SEQ

  It is not exactually your requirement, but it should help you with the marker/end marker to start. (I hope)

  Concerning

  Ray Farmer

• Error: The property node (arg 1) in .vi VISA set up a Serial Port (Instr)

  Hello

  I've seen people once they have gotten this error, but none of them really apply to my situation.

  Right now I use LabVIEW example code to read from a device manufacturer. This device is connected using a Tripp Lite USB adapter series (http://www.tripplite.com/en/products/model.cfm?txtSeriesID=782&txtModelID=2430) for the connection from the PC to device with RS232. The adapter works fine when using the software prepared in advance (not LabVIEW) given by the manufacturer and the COM port is seen by LabVIEW. When I run the program, I get the property node (arg 1) visa set up a Serial Port (Instr) .vi (I've also attached the VI but it's a standard VI I got of LabVIEW). I get this error despite the fact that I use the same COM port, who has worked with the manufacturer's software.

  I have attached manual of Protocol RS232/debit BUS (not sure if this applies) that requires the device. The device is a mass flow controller whose operating instructions is: (http://nemu.web.psi.ch/doc/manuals/device_manuals/Bronkhorst/917023--Operation%20instructions%20digi...

  I'm using LabVIEW 10.0.1

  Any help is appreciated

  Try to restart the PC and then try the LV version before trying other software.

  I have seen thrid party serial interfaces work on the first try but fail when you switch to another application. It was as if the pilot did not know that it was no longer the first process.

  Ben

• change the property of element in array for 'initialized '.

  I'm a newcomer here. And it's a simple question.

  The objective of this part is to record the data in the table.

  

  You can see that if the array element is not initialized, it will be not recorded in the worksheet, which saves space in the disk. So change the property 'initialized' of this feedback to unitialized array element?

  Thank you

  You can "right click on the item of data operations remove the element.

  (This has nothing to do with "uninitialized". The size of the array is indicated by the light elements, the dull items fall outside the valid range, which has nothing to do with the size of the container. Your first table has two components and that your second table has three elements).

• How do I dynamicaly create TestStand properties when loading the limits of an Excel file using the property loader?

  Hello

  I need help using the shipper of the property. I have an excel file that contains a bunch of properties, and the properties change quite often. I want to be able to load a picture of the excel file properties by using the shipper of the property and create these properties in Teststand programmatically. It is a sample of the file I want to import: when I tried the charger of the property, I got an error, because the properties did not exist. So, how can I create them as they load?

  LIMITS OF DEPARTURE
  	Value of the variable
  	Value of the variable
  LowLimits	10 20 30
  PinNumbers	0 1 2
  	Value of the variable
  LIMITS OF THE END

  Thank you

  Ayman

  Thanks Ric, Ray. Both of your comments, I was able to do that the tool works exactly as I want. The final version of my custom tool is attached.

• Unable to modify the property in the property node

  Hello

  I am configuring a DAQmx routine where I record multiple analog channels. I am able to create the routine, but I read that there are some problems with multi-channel sampling (ghosting), so I wanted to avoid this.

  How to eliminate ghosting of my measurements? :

  http://digital.NI.com/public.nsf/WebSearch/73CB0FB296814E2286256FFD00028DDF?OpenDocument

  Furthermore, who directs you;

  How can I increase without delay using NOR-DAQmx or NOR-DAQ traditional (old)?

  http://digital.NI.com/public.nsf/WebSearch/65E7445DB1AA5DC586256A410058697B?OpenDocument

  However, when I try to use a property DAQmx Timing node, I am not able to change the property (see screenshot). I tried right click and left click and clicking on everywhere. I think that there is something I could not understand, but pointers would help a lot! Chaning between read/write does not help

  Never mind! Found the solution in the knowledge base

• The property CWIMAQViewer.ZoomToFit is? Using c#.

  CWIMAQViewer.ZoomToFit property is listed in the documentation OR Vision (8.6), but he does not exist. I use c#. Is this a bug?

  Here is the property you are looking for:

  CWIMAQViewer1.GetCWIMAQViewer.ZoomToFit = True

  One of the more intelligent colleagues found here Jim9772

  I hope you help and everyone who is looking for her.

  Please accept my greetings.

• 200077 error has occurred to the property trigger Node DAQmx DAQmx Start Trigger (analog Edge.vi:1-> CRT with trigger

  I created a program that reads analog data and draw a waveform, but I need to stop the program when the voltage drops to a certain tension. When I tried the analog edge trigger it showed the error in the subject:

  Reason: The requested value is not supported for this property value. The value of the property may be invalid because it is in conflict with another property.

  Property: Trig startup type

  Requested value: analog edge

  You can select: Digital Edge, no

  I understand what the analog trigger is not available for my DAQmx version, without again getting equiptment, can I use a trigger to stop reading data at a specific voltage?

  How to start and stop a similar read digital triggering?

  Thanks in advance!

  Ah! Well, then the Boolean value of status would be connected to the State of the thread of the unbundled error, Boolean stop to the stop button and the Boolean value to the right would be the stop for loop itself... so something like this (see image).  This is an excerpt from LabVIEW 2014, so it can not easily fall in your version, but I hope it's clear enough on how you can wire it to the top.

• Is it possible to put the property inside the loop node?

  I created three nodes of separation of property (color graphics) for my 3 XY graphs.

  Is it possible to have a property node, put this tag inside the loop where I ranges from 1 to N, and say plot_color_i

  where plot_color_1 would update 1 XY graph, plot_color_2 update XY Graph 2, etc. ?

  See the attached VI.

  Yes.  Create an array of references to the XY graphs and have this auto-index in the property node in the loop For

• the property of the graph XY value node labels problem

  Hello

  I have a XY Chart, and in coding, I have introduced into different clusters (cluster of two elements, each of them is a table 1 d).

  To sort the chart "remembers" the old data labels (data type, see background windows help), and I can just change it to the new.

  Let me explain better with this picture:

  

  The goal is to get the appropriate data type when I read data from the XY graph through the property node. I want to see 'curve' when I ungroup by name, not a former name of "DAC (V).

  Please don't tell me to delete this graph and create a new. This of course solved my problem, but I would like to know, how I can "force" a XYGraph change its names of data types...

  I've also attached a VI test to show this behavior...

  Suggestions?

  Thank you

  Kind regards

  Yes, it seems to keep outdated information. I was able to remedy to temporarily a table 1 d complex wiring to the terminal of the XY graph, then your cluster back wiring.

  

• The property node reference

  Hello guys,.

  Using the property node, I confused with the terminal of reference there. Can we establish a special reference to the control (button, for example), but obviouly I couldn't connect the button directly to the point of reference. I find an example about which attached in attachment. How can I creat something like that? So enjoy!

  Phyyu,

  VI server references follow the structure of object-oriented class. A VI server reference can refer to a wide range of objects, such as a control, etc. variable indicator, VI. Server of VI References can be as strict or not strictly typed as you wish. A control/light specifically made reference refers to a command that you pass to it. You can request to be more rigorous by right clicking on the reference, and using menus to select the class that you want to reference. A tree of possible class might look like this: Server VI > generic > G object > control > Array. Now this reference requires a pointer to a table control and will not accept any other type of control. If you use this reference control to create a property node, the properties will be specific to the array class.

  A refnum is simply a numeric value that refers to a place in memory. Reference and refnum are used somewhat interchangeably in LabVIEW.

  I hope that answers your questions! See the help files of LabVIEW for VI server references to learn more about them.

  Kind regards

  Alexandra Valiton

  Technical sales engineer

  National Instruments

• How to get the reference or the property of a member in OOP node?

  Hello world

  Is it possible to get the referral of a member in OOP?

  After you have created a class and an insert, a member of control in the cluster, I conclude that, when a right click on it, there is no element of "creat-> reference" or "create-> property node?

  So, how to get the reference or the property of a member in OOP node?

  Hello

  There are a few reasons that you can't do what you want to do:

  1 al ' LVOOP ordinary (as opposed to the DVRS in LabVIEW 2009, or some other framework / pattern design) are items of LabVIEW by value, as a cluster and therefore you can not create a reference to a class.

  2. a control of the object (this is what you get when you drop an object on a façade) is a 'black box' because you cannot look inside. This is to support the idea that the class data private. This means that you can't get a reference to all internal control when its on a façade

  3. check the references are valid only for the controls in the Panel before and therefore any class (or other piece of data of LabVIEW) on a wire / shift register / constant / anywhere other that of the façade, will have only the data portion of the available control.

  To access the items within a class, you create the accessor screws (you can create them easily by right-clicking a class (or the folder within the class) in the project tree and selecting New-> VI to access data members.) This VI would at least have a unbundle / bundle node (depending on whether its read/write) and could, if you have many more features such as range checking. You can use this VI whenever you want to read the Member your interested.

  I hope this helps.

  Shaun

• Is there a way to determine the representation of a digital control through the property?

  All,

  It is perhaps a silly question.  Is there a way to determine the representation of a digital control of its reference?  For example, U8 vs DBL. I want to fill in the data of a file to a vi and then run it.  I can't seam to find the property that I need.

  Thank you

  Rich

  Hi rich,

  You should find this property where all others are found

• OK the property button (LV7.1) cluster node

  Hi people,

  I already found a solution to my problem, but I was wondering if someone could put a logic to it.  I created a group of Boolean values with buttons OK because I wanted to use custom text labels, etc.  When I unbundle the cluster, I get the Boolean desired.  However, when I created a property node, the value was the variant - makes no sense to me.  If I wire the property node to a conversion of the VI Variant (with the Boolean type), the output of the property node suddenly becomes Boolean and stays that way when I remove the conversion VI - makes even less sense.

  Why OK buttons are somewhat different from other Boolean when used in a cluster?

  The fix that I went was to create a bunch of LEDs square with text, turned in the controls and then put them in a cluster.

  Michael Tracy

  Synergy microwave

  The property node was a variant because the 'OK' button is a type of lock. You shouldn't read/write locking type buttons programmatically, because a race condition is inevitable. Your question didn't concern the cluster.