the property of the graph XY value node labels problem

Similar Questions

• How to read the values of the variables of façade in loops without using local variables or property value nodes?

  I know that local variables and nodes of property value are causing a lot of problems.

  But if I read the value of a variable front outside a loop.

  the value is only read once before the start of the loop.

  Changed the front variable values during the iterations of the loop, is invisible.

  How can I solve this problem?

  
  

• Change the graph with nodes of property

  I've been struggling with this problem for a while now. I have a graph of simple waveform I want to set the horizontal scale to and then make a .png to file. The vi is attached. This vi is up to a lot more great vi. Does not work when I run the first level vi of the adjustment of the horizontal scale. The .png file I receive shows the unadjusted graph. However, if I open this vi and then run the first level vi it works - the graph shows the .png file scale properly. Also, if I just run this vi se it works correctly.

  I'm guessing there is a timing issue and the .png file is created before the scaling takes place, but I don't see how.

  Does anyone have any ideas as to why the scale does not if the vi is not open, when it is executed?

  If the front of the VI is not open, the nodes property can do nothing because they run in the UI thread.  This is consistent with the behavior you report with it works when the VI is open.

  Can you try to open the façade but putting off the screen (if the user does not see it) and then set the properties of the graph?

  Lynn

• How to get the reference or the property of a member in OOP node?

  Hello world

  Is it possible to get the referral of a member in OOP?

  After you have created a class and an insert, a member of control in the cluster, I conclude that, when a right click on it, there is no element of "creat-> reference" or "create-> property node?

  So, how to get the reference or the property of a member in OOP node?

  Hello

  There are a few reasons that you can't do what you want to do:

  1 al ' LVOOP ordinary (as opposed to the DVRS in LabVIEW 2009, or some other framework / pattern design) are items of LabVIEW by value, as a cluster and therefore you can not create a reference to a class.

  2. a control of the object (this is what you get when you drop an object on a façade) is a 'black box' because you cannot look inside. This is to support the idea that the class data private. This means that you can't get a reference to all internal control when its on a façade

  3. check the references are valid only for the controls in the Panel before and therefore any class (or other piece of data of LabVIEW) on a wire / shift register / constant / anywhere other that of the façade, will have only the data portion of the available control.

  To access the items within a class, you create the accessor screws (you can create them easily by right-clicking a class (or the folder within the class) in the project tree and selecting New-> VI to access data members.) This VI would at least have a unbundle / bundle node (depending on whether its read/write) and could, if you have many more features such as range checking. You can use this VI whenever you want to read the Member your interested.

  I hope this helps.

  Shaun

• Display the names and values of the parameters in the node parameter of forms

  Hello
  
  Is it possible to loopback programmatically via the node parameter forms get the name and value of each parameter. I don't know the name of the individual parameters in advance. I want to display the parameter names and values on a help screen generic as each of our reference forms.
  
  I could do somewhat similar code to display all names of block in a first_block get_form_property property and nextblock property get_block_property is formed. I can't think in the same way as the parameter names and the values of the list if.
  
  Any suggestions would be welcome.
  
  Thank you
  
  Neil

  No, there is no standard built-in to browse Forms settings.

  François

• Visualization of more values on the graph of the DAQ card

  Hello

  I acquire a Signal using the data acquisition card, the problem is that I can view only a few values on the graph of a waveform. Guide kindly of me if I want to see the points more on the graphical waveform, what I would do in my programming window.

  Concerning

  I think that you just want to use a TABLE instead of a chart.  A graph has an associated history, so that it shows more that just the last data series acquired you and wrote to the curve.

• The export of certain values of the graph xy to the worksheet

  Hello

  I'm newish to labview and I'm trying to extract the values used to draw the graph XY, but only for x = 0, 10... 90, 100... 360.

  instead of extract values 361, I only need 37. I tried to use another statement, but with no success.

  Any help?

  Or use the table decimate for each 10 value in the input array.

  Mike...

• Display of numerical values (labels) on the graph

  Hello

  I've searched for a while but cudnt find a solution. I showed a chart on the chart. Now, I want to show the numerical values of the

  table points on the graph so that I don't always have to use a cursor for the XY coordinates while moving on the chart. How can I do?

  Searching on the forum I found, it can be done with waveform graph. We can do with graphics as well? In Microsoft excel, the option is there for that.

  Thanx.

  Here you go, LV (untested) 8.6

• display the values on the graph

  Hi all

  My requirement is...

  

  My work is about...

  

  It is:

  I'm not able to view the values on the graph as first screenshot.

  I tried all the options available in the properties of chart...

  Please, help me to solve this requirement, thanks...

  It's a really last, so easy to miss.

  If that's what you looked can you may close the debate and mark if necessary? It will help others who are looking for the same thing. For now, it is still this question is no answer.

• Is it possible to display the dynamic value in the ToolTip? I tried: this.assist.toolTip.value = this.rawValue; for a text field 'property MouseEnter', but it does not display the current raw value. It displays a previous raw value of the field... Guilty

  Is it possible to display the dynamic value in the ToolTip?

  I tried:

  this.assist.toolTip.value = this.rawValue; for a text field on 'ownership' MouseEnter

  but it does not display the current raw value. It displays a previous raw value of the field...

  I wrote 'YYYY', but is not displaying on the first mouseEnter event

  

  When I show event mouseEnter for the 2nd time it gives good value.

  

  Now, I changed the "BBBB" value but the first mouseEnter event it displays the value previous i.e. "YYYY."

  

  I found the solution. I wrote the script ("this.assist.toolTip.value = this.rawValue ;") on 'property MouseEnter' but the need to write the script to the "Output" of the field event. ")

  

  Thank you.

• The Left property must be a pixel value!

  When I tried to publish my sensitive site, there is a message:

  Adobe Muse CC has detected an error and stops...

  The Left property must be a pixel value.

  Please help with this! I need publish the Web site for my client, and this problem can´t let me finish.

  Hello!

  Don t I'm sorry, but I don't know what happened, I just update Adobe Muse CC 3 days and the problem disappeared.

  Concerning

• Values of the graph axis apex

  4.2.1

  Hello

  In a bar graph when we left say counts on a bar y axis, and if the numbers are like 1, 2, then the y axis shows the values as 0,0,1,1,2. There is no parameter to play with the values on the axis. It seems that automatically, what he wants, perhaps based on what ever the values it becomes. I expected something like 0, 1,2,3... etc.

  Any suggestions on how to fix this?

  Thank you

  Ryan

  Hi Ryan,

  By default, the automatic calculation used for graphics mode is 'Basic', but it seems you use the parameter "Smart", as indicated in the AnyChart online documentation here: http://www.anychart.com/products/anychart/docs/users-guide/Axes-Scales.html#auto-calculation-modes.  To apply this setting to your chart, go to the page graph attribute, value "use Custom XML' Yes and update the tag to the tag y_axis to set auto_calculation_mode ="Smart ".

  auto_calculation_mode = "Smart" / >

  I hope this helps.

  Kind regards

  Hilary

• On the graph and the trace of the 'other values '.

  Hi all.
  
  Currently using Apex 4.1
  
  Suppose you have a pie chart and want to just draw the first values of n, say the top 5 customers, and then group those remaining on a silce. Indicating that perhaps the rest are without interest to you. Group them under 'other '.
  
  Which is possible some graphics manipulation property or what I need to solve this problem on a query somehow...?
  
  Can someone give me a clue...?
  
  Thanks in advance...!

  It can be done in a query using rank().

  Basically classify you your groups and then do something like:

  Select
  cases where to classify<=5 then="">
  else 'other '.
  as the_groupings,
  Sum (mycounters),
  ...
  ...
  ...
  ...
  Group
  cases where to classify<=5 then="">
  else 'other '.

  Thus, myKey would be albums/clients/groups of names in the data, while the rest would be labeled as 'other '.

  Not sure of the syntax of details (I'm sure it will be difficult) but the method must be healthy.

  HTH,
  John

• Precise timestamp on the graph of the band with scrolling

  I have a user interface with a set of synchronized graphics that operate in mode scrolling stripchart.  The elevator of the x-axis is visible on one of the cards, and the operator has the ability to take a break from the update of this table (essentially locking the entrance to the chart) and scrolling in a bit of history.  The width of the graph is about one minute of data, the number of points has been set to allow about an hour to scroll of history.  Other maps which are synchronized with the main chart have the x-axis property nodes attached, so that they follow the scrolling of the main graphic.

  Everything works fine with the current configuration, except for one small detail: the timestamps.  I put date and time stamping visible on the x-axis of the main graphic, so that operators know exactly when any aberration in the data actually took place.  I have seen a few entries in how add real timestamp, but none of them seemed to work properly.  They work very well on a standard sight, but fail miserably once the scrolling action is activated, so I have to do something wrong.

  Any suggestions on the best way to get this accomplished timestamp?  It's absolutely crazy to me how much pain is to put a timestamp to the real real world in a graphic...  As someone who constantly defends LabVIEW against colleagues who claim that it is "too difficult" to use it, it's kind of embarrassing when a thing so simple becomes so complicated in LabVIEW!

  The short answer is that this is impossible with a graphic if you add the requirement to be able to take a break. The reason is simple - a chart stores data on its own, but it saves all the values of X - you give only values Y and for the X values he simply uses the index of the value and the most you can do is set a t0 and delta t for the X scale. This works normally, but does not work when you stop feeding data to the chart, because the value of X is not stored. I heard someone say once a waveform graph does not allow this, but I've never looked into it and I'm not sure that's true.

  What you can do is use a graphic instead of a chart - in a graph, you provide values X and Y for each point, so you can have absolute time for the x-axis values. The key point is that, to a chart, you must provide all the data to draw, you must maintain a circular buffer of the data yourself. You can do this by using a queue with loss, when you preview the queue to get the data, but there are also some examples online, as well as in the finder of the example, if you search for 'XY Chart'.

• Disable the change to the scale of the graph

  Hello

  I want to block the scale of a graph on the front panel, which should display the y-scale of 0 to 6.

  So I disable the autoscale y axis. But at run time I can always change the label max tick manually.

  How can I lock the increment on the scale label without using the property node?

  THX,

  Wilbur

  You have a property called editable in properties of scale Y of the graph than the value false.