The use of two different NICs on the RT?

Similar Questions

• Use of two different MAC addresses EX60

  Hello outthere.

  I use an EX60 for testing. Everything works fine, but my colleagues told me that endpoint uses two different MAC addresses. These addresses are seen on the switch will remain the ex60 ist connected.

  The situation has not changed after doing a factory default.

  It's a kind of Mystic, because my ex90 do not use two MAC addresses.

  So the question is, what is the diffrence between ex60 and ex90? Is this a normal behavior on ex60?

  I hope someone can help me!

  Greetings from the Austria

  Martin

  Hello

  Using a touchscreen on the EX60? I think that the 2nd MAC address will probably be that of the touchscreen attached. How to check? The MAC address of the EX60 can be verified using the API. SSH into the EX60 and run:

  XStatus network //Mac

  * s network 1 Ethernet MacAddress: "00:50:60:05:52:BA."

  * end

  Ok

  The MAC address of the button can be controlled via access root for the codec.

  SystemTools rootsettings on

  [dderidde-ex90-desktop: ~] $ arp - a

  ARM3. LocalNet (169.254.0.13) to 00:e0:0 c: 00:8 c: 43 [ether] on eth1

  arm0. LocalNet (169.254.0.10) to 00:e0:0 c: 00:8 c: 40 [ether] on eth1

  ARM2. LocalNet (169.254.0.12) to 00:e0:0 c: 00:8 c: 42 [ether] on eth1

  HSRP-10-48-2 - 1.cisco.com (10.48.2.1) at 00:00: 0C: 07:ac: 00 [ether] on eth0

  ARM1. LocalNet (169.254.0.11) to 00:e0:0 c: 00:8 c: 41 [ether] on eth1

  Arm4.LocalNet (169.254.0.14) to 00:e0:0 c: 00:8 c: 44 [ether] on eth1

  [dderidde-ex90-desktop: ~] $

  My contact is not directly connected, so can't see here, only the gateway address MAC address. But you should see the touch directly connected.

  Otherwise, there is a sticker on the back of touch with serial number, and I think, MAC also.

  We have a DDT open for this behavior.

  CSCtz86298 - 802. 1 x is not handled properly on device with PC port and / or Touch

  Greetings from Belgium.

  Danny.

• wrong message: identity adobe already used on two different computers

  Hello

  I have an adobe acteuell identity. He since 2005 are registered products, currently I use CC (annual duration) and Premiere Elements on Mac OS on an iMac.

  As I read, my license to use the software on two computers.

  Now, I configured a laptop computer with WIN10 and want to install Lightroom.

  Unfortunately, I get the message of this identity of adobe, already used to activate the software on two different computers. This message does not match the facts. Activated the single device namely seems only imacW.local. Although I installed on my ipad LR, I haven't needed, because it is not very easy to use, but I guess that this circumstance for my problem is meaningless, since this unit is also not displayed as enabled and so I could not turn off it.

  For completeness: I've always found an 'old' and unused adobe identity, I is not necessary and can be deleted. There's a free subscription to creative cloud (probably for a long time exceeded) - but no device! -registered. Maybe it's 'second computer?

  Wolfgang

  The message of the two active facilities apply only to one account.  Maybe did you sign twice without having signed the time?

• * Creating Cloud * [can I use two different applications of cloud on different computers at the same time for example Photoshop on one and on another InDesign?]

  So I know that you can have creative cloud up to two computer and its not of platform specific, so you can have it on a Mac and the Windows platform at the same time. BUUUT I know that you can not use them simutaniously, but which still apply to the when im I need to work on photoshop on only one computer and indesign on another who would always use them at the same time so he would evict me? or can be used on two different programs at the same time?

  Always there was confusion on this issue.

  Adobe said yes in 2012 and 2014.

  Running different applications - 2 computers, a single license

  Contradictory information on the simultaneous use of CC.

  Don't know the current position of Adobe.

• You can use the x 86 version and the x 64 version on two different computers

  I have a key/installation of Windows 7, which can be used for installing the x 86 version or the x 64 version. Could I use the x 86 version and the x 64 version on two different computers?

  Hi hgcxngv,

  No - not at the same time.  A key is an installation by the license agreement (regardless of the size of bits).   Is excluding the special manufacturer or license multiple keys which normally applies to companies and I am sure that you would know if you had a since they would cost much more to buy and were more difficult to obtain (if you remember).

  You can install by using 32 bit on a computer and then uninstall it from this computer and install the 64-bit on the other or vice versa (although you'll probably need to use the help of phone to activate the second time since the automated process will most likely perceive it as an attempt to both facilities and reject and you will need manual for past this problem).

  The foregoing does not apply to OEM licenses that cannot be installed on computers with they came, live and die with this computer (even if the key would have worked on each version, perhaps in order to simplify things for the manufacturer).

  I hope this helps.

  Good luck!

  Kosh

• If I buy the adobe cc then can I use it on several laptops at the same time? I use two different computers for my work. as a photoshop and illustrator, for example.

  If I buy the adobe cc then can I use it on several laptops at the same time? I use two different computers for my work. as one for photoshop and Illustrator for example.adobe

  This excerpt from: terms of conditions of use Adobe software should help to clarify the terms for you:

  ..... You can activate the software on up to 2 devices (or virtual machines) at the same time, if these activations are associated with the same Adobe ID for the same person, except http://www.adobe.com/go/activation_fr. However, you cannot use the software on these devices simultaneously.

  You can also see:FAQ: where can I find the terms of membership and the terms of use?

• I want to open two different pdf documents and view them at the same time so I can read about everything by watching the other document.  I use Acrobat DC and whenever I open a document it creates a tab and I can only examine a document at a time.

  I want to open two different pdf documents and view them at the same time so I can read a whole watching the other document.  I use Acrobat DC and whenever I open a document, it creates a tab and I can only examine a document at a time. Is it possible to display two or more documents without having to toggle tabs?

  Don't think that will work, but you can drag the tab to a new window. Each window can have a set of tabs.

• How to use two different versions of the stub of Web Services SDK files in a single project (5.5 and 6.0)

  Hello

  I have a project that uses the vSphere 5.5 management SDK (I built the stub files according to the documentation) and have these in my c# Solution. Everything works beautifully. My class files that interact with vSphere all have a use statement as follows:

  using Vim25Api;

  All fine so far.

  Now, I want to be able to provide support for a user to connect to vSphere 5.5 and 6.0 vSphere environments. I built the stub files for vSphere Management 6.0 SDK and those in my solution presented in a separate project. Each project is based on a different class library and I have each set of files for each version of vSphere stub in different NuGet packages. However, when I select to use a vSphere 5.5 connection, it seems that internally the 6.0 files stub are used, or vice versa.

  I tried to separate things out by giving the Vim25Service.dll and Vim25Service.XmlSerializers.dll files for each version of alias names (alias by default for all assemblies is "global", but I changed it to vSphere5 and vSphere6 for each version. Then at the top of each class file before all with what I'm doing:

  extern alias vSphere5;

  or

  extern alias vSphere6

  (According to what project I'm in). Then, use the using statement for each class file that interacts with vSphere using vSphere5::Vim25Api; or using vSphere6::Vim25Api; to use the files to correct/stub namespace for each version I support.

  However this still doesn't seem to work, and things seem to be getting confused upwards somehow. I take a guess that internal files make calls and somehow have crossed.

  Is it possible to use two stub version of vSphere together different files in the same project? How should I handle my script? I thought of just upgrading to use the version of vSphere 6 (I can always connect to vCenter 5.5 using these, but some of the properties on the object have changed, (for example some dynamic properties on AlarmObjects and other items have been removed and code breaks if I delete the references to the stub vSphere 5.5 files.) So, I want to keep two different versions and use each of them separately in the same solution, so I support vSphere 5.5 and vSphere 6.

  Solved - this using wsdl.exe and just by specifying a different namespace to use in the proxy class that is generated by using the /n switch.

  for example using PowerShell to build automatically, the value $VimApi and do:

  WSDL.exe/n:$ VimApi...

• Is it possible to use two different computers with the same adobe - ID and the same adobe license?

  Is it possible to use two different computers with the same adobe - ID and the same adobe license?

  Hi Morten,

  Yes, you can have your subscription or your license installed on two different computers with the same adobe id, however use one at a time.

  Please let us know if you have any questions, more about it.

• If you have CC on two different computers and you forget to sign out how do you use CC on the second computer?

  If you have CC installed on two different computers and you forget to sign out how do you use CC on the second computer?

  Please see this link for more information on the installation of creative cloud on multiple computers:

  FAQ: Can I install Creative Cloud on several computers?

• How to track the message to two different queue using jms proxy service

  Hi all
  In my project, I need to listen to a jms queue, then forward the messages to the queue of two different.
  Now, I already have a proxy for listening to the queue and then pass it to another queue using business service, it works.
  But how to forward messages to two different queues in the same workflow process using a proxy and bs?
  
  or in any other way?
  
  Really thanks in advance.
  
  Kind regards
  
  Kahlil

  You can use actions to publish in the pipeline to achieve this.

• How can I run two different versions of Firefox, the last does not work with a site important I need to use?

  With the latest version of Firefox, I can't ' fast email ' to my students through the ANGEL of the College System. I had to uninstall and go to an earlier version. I prefer the new rev.

  A way to run two different versions. It doesn't have to be simultaneously. Seems to be a problem on the Mac and my XP systems.

  Thank you
  Kim

  You can install the portable version of Firefox 3.6.x to access Web sites that don't work with Firefox 5 +.

  • http://PortableApps.com/apps/Internet/firefox_portable#legacy
  • http://PortableApps.com/apps/Internet/firefox_portable/localization#legacy36

• I have 2 copies of open Firefox (two different windows with lots of tabs), if I reboot can I restore the two sessions?

  I have 2 copies of open Firefox (two different windows with lots of tabs), if I reboot can I restore the two sessions? I am familiar with clicking history / restoration of previous session, but do not want to reboot to let windows update to do it's thing unless I can restore the two sessions.

  guigs2 said

  If they run different profiles, then Yes.

  Thanks, but I use only 1 profile. However, I found the answer! If I restart/turn off / down pc WITHOUT closing a firefox session, he will come with the screen 'well, it's embarrassing"and list the TWO sessions to restore. The trick is not not to close before stopping! If you close them first, then you can only restore the session first (?).

• Two different language versions of Firefox at the same time?

  I am running Windows 7 Home Premium. I have two accounts, one for me and one for my wife. She uses Firefox (Japanese), and I've been using another browser. But I would like to firstly using Firefox (in English).

  Is it possible to run two different language versions of Firefox on the same computer? I want to be able to run both at the same time... (So if I navigate and she wants to check an auction quickly it can without my duty close my browser).

  Can be done with relative ease?

  Make sure that each of you has their own Firefox profile folder.

  See:

  • http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
  • http://KB.mozillazine.org/Shortcut_to_a_specific_profile
  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox

  You can add - no.-distance to the command line to open another instance of Firefox with its own profile and run multiple instances of Firefox at the same time.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

• Two different processors in Vista on the Satellite M-series(1M8) Device Manager

  I have two different processors in the vista Device Manager:
  first pilot intel core 2 Duo T7100 and second Core 2 Duo T7700

  What this means and how do I use it?

  Thanks Klaaus

  Hello

  This is a bug of Vista ;)
  Just remove the processors the Device Manager and reboot the laptop.
  After the restart new Vista should recognize and refresh the information in the CPU.

  Best regards