The user has no access privileges

Similar Questions

• Cannot open backup files. Error "user has no access privilege.

  I can't open the files I copied from my laptop on an external drive. My book, which is running XP, crashed and I had to do a complete reinstall. I had backup files copied to an external drive. I did not use any backup software, just the copy command. But now when I try to open the backup files, I get "the user has no access prvileges.

  I tried ALL of the suggestions found here, unless I missed one, such as the safe boot mode and change the settings and owner privileges. I've logged as an administrator and even created administrator accounts but still no go. I changed the parameters of the owner of the entire disk in the hope of it cascading down to the files, but still no luck. I can get the files to show that the property has changed, but whenever I try to open them, the problem persists!

  The backup drive that I used is now connected to my desktop computer running Windows Vista. Is there a program I can use to hack and open files or y at - it some part that I have not found another workaround solution?

  How can I disable this mode and access the privilege entirely stuff in Vista?

  Help, please.

  After taking possession you must then give yourself permissions to
  access the file.

  --
  ..
  --
  "flight027" wrote in message news: 7d8249e0-8663-40f2-8bf6-d004e3f807b8...
  > I can't open the files I copied from my laptop on an external drive. My
  > notebook, which is running XP, crashed and I had to do a complete
  > reinstall. I had backup files copied to an external drive. I have use any
  Copy the command. But now when I try to open the
  > backup files, I keep getting "the user has no access prvileges.
  >
  > I tried ALL of the suggestions found here, unless I missed one, such as
  > start safe mode and change the settings and owner privileges. I have
  > logged as an administrator and even created administrator accounts, but
  > still no go. I changed the parameters of the owner of the entire disk in the hope of
  > It cascaded down to the files, but still no luck. I can get the files to
  > show that ownership has changed, but whenever I try to open them, the
  > problem persists!
  >
  > The backup drive that I used is now hanging in my office running
  > Windows Vista. Is there a program I can use to hack and open the
  > removal or y at - it some part that I have not found another workaround solution?
  >
  > How to turn off this mode and access privilege stuff completely in Vista?
  >
  > Please help.
  >
  >

• ODI is not able to detect the primary/foreign keys to XML - the user has no privilege or object not found

  Hi guys,.

  Im trying to load an XML with the address of two entities and employee as below. The topology of reverse engineering, everything works well. Even able to display the xml data in ODI, but when I try to load the data of these two entities join by the schema of the primary keys and foreign keys which created odi engineering process reverses for xml, im im getting the error below.  IM able to load an entity data, error occurs only when I use the join odi creates internally to identify employees for xml and address components

  XML file:

  <? XML version = "1.0" encoding = "UTF-8"? >

  < EMP >

  < Empsch >

  < employee >

  < EmployeeID 12345 > < / EmployeeID >

  < original > t < / initials >

  John < name > < / LastName >

  DOE < FirstName > < / name >

  < / employee >

  < address >

  < > 12345 as WorkPhone < / as WorkPhone >

  < WorkAddress > test 234 < / WorkAddress >

  < / address >

  < / Empsch >

  < / EMP >

  Topology: jdbc:snps:xml?f=C:/Temp/RR/Empsch.xml & s = Empsch & re = EMP & dod = true & nobu = false

  Error message:

  -5501: 42501: java.sql.SQLException: user has no privilege or object not found: EMPSCH. EMPSCHPK

  java.sql.SQLException: user has no privilege or object not found: EMPSCH. EMPSCHPK

  at org.hsqldb.jdbc.Util.sqlException (unknown Source)

  for org.hsqldb.jdbc.JDBCPreparedStatement. < init >(Unknown Source)

  at org.hsqldb.jdbc.JDBCConnection.prepareStatement (unknown Source)

  at com.sunopsis.jdbc.driver.xml.SnpsXmlConnection.prepareStatement(SnpsXmlConnection.java:1232)

  at sun.reflect.GeneratedMethodAccessor65.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  to oracle.odi.core.datasource.dwgobject.support.OnConnectOnDisconnectDataSourceAdapter$ OnDisconnectCommandExecutionHandler.invoke (OnConnectOnDisconnectDataSourceAdapter.java:200)

  to $Proxy2.prepareStatement (Unknown Source)

  at oracle.odi.runtime.agent.execution.sql.SQLCommand.doInitializeStatement(SQLCommand.java:83)

  at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:117)

  at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:111)

  at oracle.odi.runtime.agent.execution.sql.SQLDataProvider.readData(SQLDataProvider.java:81)

  at oracle.odi.runtime.agent.execution.sql.SQLDataProvider.readData(SQLDataProvider.java:1)

  at oracle.odi.runtime.agent.execution.DataMovementTaskExecutionHandler.handleTask(DataMovementTaskExecutionHandler.java:70)

  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)

  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)

  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)

  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)

  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2128)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:366)

  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)

  at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:292)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:855)

  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)

  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)

  at java.lang.Thread.run(Thread.java:662)

  Caused by: org.hsqldb.HsqlException: the user has no privilege or object not found: EMPSCH. EMPSCHPK

  at org.hsqldb.error.Error.error (unknown Source)

  at org.hsqldb.ExpressionColumn.checkColumnsResolved (unknown Source)

  at org.hsqldb.QueryExpression.resolve (unknown Source)

  at org.hsqldb.ParserDQL.compileCursorSpecification (unknown Source)

  at org.hsqldb.ParserCommand.compilePart (unknown Source)

  at org.hsqldb.ParserCommand.compileStatement (unknown Source)

  at org.hsqldb.Session.compileStatement (unknown Source)

  at org.hsqldb.StatementManager.compile (unknown Source)

  at org.hsqldb.Session.execute (unknown Source)

  ... more than 27

  Please advice

  Thank you

  Fabien

  It is clear from the content of the xml file, you have given here. In this xml file, you have four type of complex. Two of them are employed and address. However the employee doesnot has nothing to do with the address that you have not added the relationship. That is why its failure. This isn't the fault of the ODI.

  Also I suggest not to use self-generated by ODI dtd that you might face problem in the future. For example, the address of XML type has 8 attributes, and 4 of them are not mandatory. This means that each of your xml file may have attributes between 4 and 8.  That's where ODI auto generated DTD fails.

  ComplexType element XML schema

  Thank you

  Chantal

• the API call error: error: the user has sufficient privileges to perform this API call.

  Hello

  I'm exploring cloudClient 3.4.1 but I'm trying to run a "vra catalog list" command or other similar commands I get the error "error: the user has sufficient privileges to perform this API call."

  I don't know what are the permissions of system requirements before I can make the API call because the account which I use to make these calls already have privileges to Administrator local on box of IAAS & is admin Admin/tenant IAAS. In short, the user is a full administrator of the tool.

  Please help me because I found there is a documentation for the usability of the cloudclient.

  Thank you

  MG

  Is the account of your help to make the law of all items in the catalog API call? We have users from the normal group of activities that use the API does not have system or administrator access.

• Really? Once again? "The user has sufficient privileges to install Adobe Flash Player"

  My browser is firefox.

  "The user has sufficient privileges to install Adobe Flash Player" is the incessant problem, I had several times the Flash update.

  Come on guys, it's beyond ridiculous. Installation always stops in 55% exactly and is never completed, leaving me to give up Firefox for Chrome. I mucked on the last, half a dozen times this has happened during the update and just by pure chance she managed to install, but it has been 2 hours mucking similar and I'm now getting nowhere.

  This has been a persistent problem and affected many users of firefox for years, as I saw it by my own experience and google search. Is there a way you all can provide a SIMPLIFIED solution to this question, in coordination with firefox or by providing a 'unique' Firefox Installer? Really it's too annoying.

  In any case, before anyone asks, yes I am logged in as administrator, and Yes, I ran the Installer "as admin" by right-clicking. I also went ahead and completely uninstalled flash (and emptied such records as requested in other threads here) and reinstalled it, only to watch the progress bar to put an end to 55%, as usual and let me by clicking on this icon of Chrome stupid to have a programme of work for flash.

  Honestly people, why, after years, it continue to be a persistent problem? Fix it for the love of God! Are you a lot guys make the ObamaCare website or what? Firefox people are loyal to our browser, and the installation of new versions of flash on this browser is a bloody useless pain in the you know what.

  Sorry for the frustration visible, but if someone could please provide a solution, I wouldn't need to be to complain here universal work and moaning.

  Try a new installation as described in http://forums.adobe.com/thread/928315

  Regarding the installation programs use these installers in offline mode:

  Flash Player ActiveX (Internet Explorer)

  Flash Player plug-in (all other browsers)

  If you still experience problems during installation, please send the contents of the FlashInstall.log file

  C:\WINDOWS\system32\Macromed\Flash and

  C:\Windows\syswow64\Macromed\Flash

• ORA-33288: another user has inconsistent access to the analytic workspace

  Gurus
  
  A customer of our meeting suite error when make action (refresh the data) of the responsibility for the EBiz project portfolio analysis
  
  # # 0 in detail java.sql.SQLException: ORA-34344: FPA analytic workspace. FPAPJP is not attached.
  ORA-06512: at the 'APPS '. FPA_UTILITIES_PVT', line 129
  ORA-06512: at the 'APPS '. FPA_PROCESS_PVT', line 2467
  ORA-33272: FPA analytic workspace. Cannot open FPAPJP.
  ORA-33288: another user has inconsistent access to the analytic workspace FPA. FPAPJP and the timeout has expired.
  ORA-06512: at line 1
  
  I searched the documentation of OLAP, metalink, google, but all simply suggest "Expect that the conflict is over.". We waited and asked their DBA to check active connections, but none has proven to help us.
  
  Issues related to the:
  ======
  1. how to avoid this error?
  2. How do I know the number of users / user information connected to the FPAPJP workspace?
  3. How can we close these sessions?
  
  Really appreciate your inputs.
  
  Thank you
  Charlene

  # 1, it seems that the process is trying to detach a workspace that is not attached. Just check in your code if you try off somewhere and work space is not attached.

  Thank you
  Brijesh

• Windows Installer error only by the installation of the machine is allowed. Please make sure that the user has the appropriate rights to do so.

  Trouble with trying to install an MSI Package. Receive the error message only by the installation of the machine is allow. It's when you try to run manually. When you try to run msiexec cmd

  msiexec /i "C:\Mimecast Services for Outlook 4.0.411.5287 (32 bit) GPO.msi" /qb/log "C:\install.log.

  = Recording started: 04/09/2013-10:36:27 Build type: SHIP UNICODE 5.00.7601.00 appeal process: C:\windows\system32\msiexec.exe =.
  MSI (c) (58:C0) [10:36:27:087]: established police.  Charset: Req = 0, Ret = 0, fonts: Req = MS Shell Dlg, Ret = MS Shell Dlg

  MSI (c) (58:C0) [10:36:27:087]: established police.  Charset: Req = 0, Ret = 0, fonts: Req = MS Shell Dlg, Ret = MS Shell Dlg

  MSI (c) (58:88) [10:36:27:107]: Resetting cached policy values
  MSI (c) (58:88) [10:36:27:107]: value of strategy Machine 'Debug' is 0
  MSI (c) (58:88) [10:36:27:107]: * RunEngine:
  Product: C:\Mimecast Services for Outlook 4.0.411.5287 (32-bit) GPO.msi
  Action:
  Command line:
  MSI (c) (58:88) [10:36:27:107]: Client and UI is none or basic: full installation running on the server.
  MSI (c) (58:88) [10:36:27:107]: grabbed execution mutex.
  MSI (c) (58:88) [10:36:27:147]: Cloaking enabled.
  MSI (c) (58:88) [10:36:27:147]: attempt of activation of all disabled privileges before calling install on server
  MSI (c) (58:88) [10:36:27:147]: meter is incremented to disable the stop. Counter after increment: 0
  MSI (s) (C 54:4) [10:36:27:157]: running the installation inside the multi-package transaction Services C:\Mimecast for Outlook 4.0.411.5287 (32-bit) GPO.msi
  MSI (s) (C 54:4) [10:36:27:157]: grabbed execution mutex.
  MSI (s) (54:F8) [10:36:27:157]: Resetting cached policy values
  MSI (s) (54:F8) [10:36:27:157]: value of strategy Machine 'Debug' is 0
  MSI (s) (54:F8) [10:36:27:157]: * RunEngine:
  Product: C:\Mimecast Services for Outlook 4.0.411.5287 (32-bit) GPO.msi
  Action:
  Command line:
  MSI (s) (54:F8) [10:36:27:477]: value of strategy Machine 'DisableUserInstalls' is 0
  MSI (s) (54:F8) [10:36:27:477]: value 'SearchOrder' user policy is 'nmu '.
  MSI (s) (54:F8) [10:36:27:477]: "DisableMedia" user policy value is 0
  MSI (s) (54:F8) [10:36:27:477]: value of strategy Machine 'AllowLockdownMedia' is 0
  MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: Media enabled only if the package is safe.
  MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: looking for sourcelist for product {C28136F7-F2C7-4426-B26F-F7E03922B34B}
  MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: added {C28136F7-F2C7-4426-B26F-F7E03922B34B}; for the potential sourcelist (pcode; disc; relpath) list.
  MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: check now product {C28136F7-F2C7-4426-B26F-F7E03922B34B}
  MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: Media is enabled for the product.
  MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: attempting to use LastUsedSource from source list.
  MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: source C:\windows\ccmcache\4\ by train.
  MSI (s) (54:F8) [10:36:27:787]: entering CMsiConfigurationManager::SetLastUsedSource.
  MSI (s) (54:F8) [10:36:27:787]: source specified is already in a list.
  MSI (s) (54:F8) [10:36:27:787]: value 'SearchOrder' user policy is 'nmu '.
  MSI (s) (54:F8) [10:36:27:787]: value of strategy Machine 'DisableBrowse' is 0
  MSI (s) (54:F8) [10:36:27:787]: value of strategy Machine 'AllowLockdownBrowse' is 0
  MSI (s) (54:F8) [10:36:27:787]: adding new sources is allowed.
  MSI (s) (54:F8) [10:36:27:787]: the LastUsedSource value: C:\windows\ccmcache\4\.
  MSI (s) (54:F8) [10:36:27:787]: value LastUsedType: n.
  MSI (s) (54:F8) [10:36:27:787]: A LastUsedIndex: 1.
  MSI (s) (54:F8) [10:36:27:787]: SOURCEMGMT: resolved source: 'C:\windows\ccmcache\4\ '.
  MSI (s) (54:F8) [10:36:27:787]: value of strategy Machine 'LimitSystemRestoreCheckpointing' is 0
  MSI (s) (54:F8) [10:36:27:787]: Note: 1: 1715 2: Services for 32-bit Outlook Mimecast
  MSI (s) (54:F8) [10:36:27:787]: SRSetRestorePoint API call. dwRestorePtType: 0, dwEventType: 102, llSequenceNumber: 0, szDescription: «Installed it Services for Outlook 32-bit»
  MSI (s) (54:F8) [10:36:27:787]: the system restore service is disabled. Referred State: 1058. GetLastError() returned: 1058
  MSI (s) (54:F8) [10:36:28:117]: file will have the applied safety of OpCode.
  MSI (s) (54:F8) [10:36:28:147]: STRATEGY of RESTRICTION SOFTWARE: Verifying package--> ' C:\Mimecast Services for Outlook 4.0.411.5287 (32 bit) GPO.msi ' against the software restriction policy
  MSI (s) (54:F8) [10:36:28:147]: STRATEGY of RESTRICTION SOFTWARE: Services C:\Mimecast for Outlook 4.0.411.5287 (32-bit) GPO.msi has a digital signature
  MSI (s) (54:F8) [10:36:28:547]: STRATEGY of RESTRICTION SOFTWARE: C:\Mimecast Services for Outlook 4.0.411.5287 (32-bit) GPO.msi is allowed to run at the level of authorization 'unlimited '.
  MSI (s) (54:F8) [10:36:28:547]: dialogue of end not activated
  MSI (s) (54:F8) [10:36:28:547]: ==> C:\windows\ccmcache\4\Mimecast4.0.msi original packaging
  MSI (s) (54:F8) [10:36:28:547]: we're running out of ==> C:\windows\Installer\14b48052.msi package
  MSI (s) (54:F8) [10:36:28:547]: APPCOMPAT: looking for entry with ProductCode '{C28136F7-F2C7-4426-B26F-F7E03922B34B}' appcompat database
  MSI (s) (54:F8) [10:36:28:547]: APPCOMPAT: no matching ProductCode found in the database.
  MSI (s) (54:F8) [10:36:28:557]: MSCOREE not loaded loading copy from system32
  MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'DisablePatch' is 0
  MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'AllowLockdownPatch' is 0
  MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'DisableLUAPatching' is 0
  MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'DisableFlyWeightPatching' is 0
  MSI (s) (54:F8) [10:36:28:557]: APPCOMPAT: looking for entry with ProductCode '{C28136F7-F2C7-4426-B26F-F7E03922B34B}' appcompat database
  MSI (s) (54:F8) [10:36:28:557]: APPCOMPAT: no matching ProductCode found in the database.
  MSI (s) (54:F8) [10:36:28:557]: transformations are not secure.
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding MsiLogFileLocation property. Its value is 'C:\install.log.
  MSI (s) (54:F8) [10:36:28:557]: command line: MSIINSTALLPERUSER = 3 CURRENTDIRECTORY = C: \ CLIENTUILEVEL = 2 CLIENTPROCESSID = 3672
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding PackageCode property. Its value is '{6C9809C5-9DBC-4683-AE5F-3E05D53939EA} '.
  MSI (s) (54:F8) [10:36:28:557]: Product Code spent in Engine.Initialize: "{C28136F7-F2C7-4426-B26F-F7E03922B34B}".
  MSI (s) (54:F8) [10:36:28:557]: the Product Code of the table of properties before transformations: "{C28136F7-F2C7-4426-B26F-F7E03922B34B}".
  MSI (s) (54:F8) [10:36:28:557]: the Product Code of the table of properties after transformations: "{C28136F7-F2C7-4426-B26F-F7E03922B34B}".
  MSI (s) (54:F8) [10:36:28:557]: unregistered product: first start installation
  MSI (s) (54:F8) [10:36:28:557]: has determined that the existing product (this product or the product being upgraded with a patch) is installed by user.
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding MSIINSTALLPERUSER property. Its value is '3'.
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: deleting ALLUSERS property. Its current value is '1 '.
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: deleting MSIINSTALLPERUSER property. Its current value is '3'.
  MSI (s) (54:F8) [10:36:28:557]: product {C28136F7-F2C7-4426-B26F-F7E03922B34B} is assigned admin: LocalSystem has the key to publish.
  MSI (s) (54:F8) [10:36:28:557]: product {C28136F7-F2C7-4426-B26F-F7E03922B34B} is managed.
  MSI (s) (54:F8) [10:36:28:557]: MSI_LUA: invites of credentials not required, the user is an administrator
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding ProductState property. Its value is '1 '.
  MSI (s) (54:F8) [10:36:28:557]: entering CMsiConfigurationManager::SetLastUsedSource.
  MSI (s) (54:F8) [10:36:28:557]: source specified is already in a list.
  MSI (s) (54:F8) [10:36:28:557]: value 'SearchOrder' user policy is 'nmu '.
  MSI (s) (54:F8) [10:36:28:557]: adding new sources is allowed.
  MSI (s) (54:F8) [10:36:28:557]: the Package name from the configuration data: "Mimecast4.0.msi."
  MSI (s) (54:F8) [10:36:28:557]: Note: 2 1: 2262: AdminProperties 3:-2147287038
  MSI (s) (54:F8) [10:36:28:557]: Machine policy value 'DisableMsi' is 0
  MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'AlwaysInstallElevated' is 0
  MSI (s) (54:F8) [10:36:28:557]: "AlwaysInstallElevated" user policy value is 0
  MSI (s) (54:F8) [10:36:28:557]: product {C28136F7-F2C7-4426-B26F-F7E03922B34B} is assigned admin: LocalSystem has the key to publish.
  MSI (s) (54:F8) [10:36:28:557]: product {C28136F7-F2C7-4426-B26F-F7E03922B34B} is managed.
  MSI (s) (54:F8) [10:36:28:557]: the product '{C28136F7-F2C7-4426-B26F-F7E03922B34B}' is running with elevated privileges: product is affected.
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding MSIINSTALLPERUSER property. Its value is '3'.
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding CURRENTDIRECTORY property. Its value is "C:\". ».
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding CLIENTUILEVEL property. Its value is '2'.
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding CLIENTPROCESSID property. Its value is '3672'.
  MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'DisableAutomaticApplicationShutdown' is 0
  MSI (s) (54:F8) [10:36:28:567]: PROPERTY CHANGE: adding MsiRestartManagerSessionKey property. Its value is 'b9237eca8dffb44583db9105bf61f283 '.
  MSI (s) (54:F8) [10:36:28:567]: MANAGER of REBOOT: logon.
  MSI (s) (54:F8) [10:36:28:567]: PROPERTY CHANGE: adding MsiSystemRebootPending property. Its value is '1 '.
  MSI (s) (54:F8) [10:36:28:567]: PROPERTY CHANGE: deleting MSIINSTALLPERUSER property. Its current value is '3'.
  MSI (s) (54:F8) [10:36:28:567]: TRANSFORMS property is now:
  MSI (s) (54:F8) [10:36:28:567]: PROPERTY CHANGE: adding PRODUCTLANGUAGE property. Its value is "1033".
  MSI (s) (54:F8) [10:36:28:567]: PROPERTY CHANGE: adding VersionDatabase property. Its value is "200".
  MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application data
  MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Favorites
  MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Network shortcuts
  MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Documents
  MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Printer shortcuts
  MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Recent
  MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\SendTo
  MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Templates
  MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: C:\ProgramData
  MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: C:\Users\tech.support\AppData\Local
  MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: C:\Users\tech.support\Pictures
  MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Menu\Programs\Administrative of Directors Data\Microsoft\Windows\Start
  MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start Menu\Programs\Startup
  MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application start\program Data\Microsoft\Windows\Start
  MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start Menu
  MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Desktop
  MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative of Directors
  MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
  MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start start\program
  MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
  MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
  MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\windows\Fonts
  MSI (s) (54:F8) [10:36:28:587]: Note: 1: 2898 2: MS without Serif 3: MS without Serif 4: 0 05:16
  MSI (s) (54:F8) [10:36:28:597]: MSI_LUA: the MsiRunningElevated of the parameter property to 1 because the installation is already running high.
  MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding MsiRunningElevated property. Its value is '1 '.
  MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding privileged property. Its value is '1 '.
  MSI (s) (54:F8) [10:36:28:597]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
  MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding USERNAME property. Its value is "Oriel securities user".
  MSI (s) (54:F8) [10:36:28:597]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
  MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding COMPANYNAME property. Its value is "Oriel Securities Ltd.".
  MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding a DATABASE property. Its value is 'C:\windows\Installer\14b48052.msi '.
  MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding OriginalDatabase property. Its value is 'C:\windows\ccmcache\4\Mimecast4.0.msi '.
  MSI (s) (54:F8) [10:36:28:597]: value of strategy Machine 'MsiDisableEmbeddedUI' is 0
  MSI (s) (54:F8) [10:36:28:597]: Note: 1: 2205 2:3: Package_correctif
  MSI (s) (54:F8) [10:36:28:597]: policy value 'DisableRollback' Machine is 0
  MSI (s) (54:F8) [10:36:28:597]: strategy user 'DisableRollback' is 0
  MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding UILevel property. Its value is '3'.
  = Logging started: 04/09/2013-10:36:28 =.
  MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding ACTION property. Its value is 'INSTALL '.
  MSI (s) (54:F8) [10:36:28:597]: doing action: INSTALL
  Action start 10:36:28: INSTALL.
  MSI (s) (54:F8) [10:36:28:597]: ExecuteSequence running
  MSI (s) (54:F8) [10:36:28:597]: action driving: FindRelatedProducts
  Action start 10:36:28: FindRelatedProducts.
  MSI (s) (54:F8) [10:36:28:597]: action driving: AppSearch
  Action ended at 10:36:28: FindRelatedProducts. Returns the value 1.
  Action start 10:36:28: AppSearch.
  MSI (s) (54:F8) [10:36:28:597]: Note: 2 1: 2262: Signature 3:-2147287038
  MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding NETFRAMEWORK40FULL property. Its value is '#1 '.
  MSI (s) (54:F8) [10:36:28:597]: Note: 2 1: 2262: Signature 3:-2147287038
  MSI (s) (54:F8) [10:36:28:597]: action driving: OutlookVersionCheck
  Action ended at 10:36:28: AppSearch. Returns the value 1.
  MSI (s) (54:C8) [10:36:28:627]: call for a custom action to distance. DLL: C:\windows\Installer\MSI837D.tmp, point of entry: OutlookVersionCheck
  MSI (s) (54:B8) [10:36:28:627]: generation random cookie.
  MSI (s) (54:B8) [10:36:28:637]: created server custom with PID 4656 (0 x 1230) Action.
  MSI (s) (54:80) [10:36:28:667]: running as a service.
  MSI (s) (54:80) [10:36:28:667]: Hello, I am your 32-bit custom action Server Impersonated.
  Action start 10:36:28: OutlookVersionCheck.
  SFXCA: Extraction of a custom action to the temporary directory: C:\windows\Installer\MSI837D.tmp-\
  SFXCA: Link to the CLR version v4.0.30319
  Call to the custom action CustomAction_OutlookCheck! CustomAction_OutlookCheck.CustomActions.OutlookVersionCheck
  BEGIN OutlookVersionCheck
  OUTLOOK BITNESS IS: x 86
  Key checking: Software\Microsoft\Office\11.0\Outlook
  Key checking: Software\Wow6432Node\Microsoft\Office\11.0\Outlook
  Key checking: Software\Microsoft\Office\12.0\Outlook\InstallRoot
  Key checking: Software\Wow6432Node\Microsoft\Office\12.0\Outlook\InstallRoot
  MSI (s) (54. 68) [10:36:28:827]: PROPERTY CHANGE: adding OUTLOOK_INSTALLED property. Its value is 'TRUE '.
  Key checking: Software\Microsoft\Office\14.0\Outlook\InstallRoot
  Found version: Outlook 2010
  Key checking: Software\Wow6432Node\Microsoft\Office\14.0\Outlook\InstallRoot
  MSI (s) (54. 68) [10:36:28:827]: PROPERTY CHANGE: property to change OUTLOOK_VERSION. Its current value is 'NONE '. Its new value: "Outlook 2010".
  Found version: Outlook 2010
  OUTLOOK_INSTALLED is: TRUE
  IS THE VERSION of OUTLOOK: Outlook 2010
  MSI (s) (54:F8) [10:36:28:830]: action driving: LaunchConditions
  Action ended at 10:36:28: OutlookVersionCheck. Returns the value 1.
  Action start 10:36:28: LaunchConditions.
  MSI (s) (54:F8) [10:38:26:502]: product: service Mimecast for 32-bit Outlook - only by the installation of the machine is allowed. Please make sure that the user has the appropriate rights to do so.

  MSI (c) (58:C0) [10:36:28:850]: established police.  Charset: Req = 0, Ret = 0, fonts: Req = MS Shell Dlg, Ret = MS Shell Dlg

  Installation is allowed only by the machine. Please make sure that the user has the appropriate rights to do so.
  Action ended at 10:38:26: LaunchConditions. Return value 3.
  Action ended at 10:38:26: INSTALL. Return value 3.
  Property (S): UpgradeCode = {586A589B-D6D5-48D3-9B6D-571EF230ED6A}
  Property (S): NETFRAMEWORK40FULL = 1 #.
  Property (S): LAUNCHOUTLOOKONEXIT = 1
  Property (S): WIXUI_INSTALLDIR = INSTALLDIR
  Property (S): OutlookOpen = false
  Property (S): ProgramFilesFolder = C:\Program Files (x 86).
  Property (S): VersionNT = 601
  Property (S): Manufacturer = Mimecast Ltd
  Property (S): ProductCode = {C28136F7-F2C7-4426-B26F-F7E03922B34B}
  Property (S): ProductLanguage = 1033
  Property (S): ProductName = Mimecast Services for 32-bit Outlook
  Property (S): ProductVersion = 4.0.348.5166
  Property (S): ARPPRODUCTICON = MainIcon.exe
  Property (S): ARPHELPLINK = * address email is removed from the privacy *
  Property (S): ARPNOMODIFY = 0
  Property (S): Platform = *.
  Property (S): ROOTDRIVE = C:\\
  Property (S): MsiBitness = x 86
  Property (S): MimecastInstaller = *.
  Property (S): CAP_Common = *.
  Property (S): CAP_Common.Options = *.
  Property (S): CAP_Common.Options.Credentials = *.
  Property (S): CAP_Common.Options.ChangePassword = *.
  Property (S): CAP_Common.Options.Network = *.
  Property (S): CAP_Common.Options.Network.Read = *.
  Property (S): CAP_Common.Options.Network.Update = *.
  Property (S): CAP_Common.Options.Capabilities = *.
  Property (S): CAP_Common.Update.Manual = *.
  Property (S): CAP_Archive = *.
  Property (S): CAP_Archive.Search = *.
  Property (S): CAP_Archive.Search.Quick = *.
  Property (S): CAP_Archive.Search.Basic = *.
  Property (S): CAP_Archive.Search.Builder = *.
  Property (S): CAP_Archive.Search.Context = *.
  Property (S): CAP_Archive.Search.Recent = *.
  Property (S): CAP_Archive.Search.Favourite = *.
  Property (S): CAP_Archive.Search.Manage = *.
  Property (S): CAP_Gateway = *.
  Property (S): CAP_Gateway.Block = *.
  Property (S): CAP_Gateway.Block.Address = *.
  Property (S): CAP_Gateway.Block.Domain = *.
  Property (S): CAP_Gateway.Block.ReportSpam = *.
  Property (S): CAP_Gateway.Block.ManagedSenders = *.
  Property (S): CAP_Gateway.OnHoldItems = *.
  Property (S): CAP_Gateway.OnHoldItems.Personal = *.
  Property (S): CAP_Gateway.OnHoldItems.Moderated = *.
  Property (S): CAP_Gateway.OnHoldItems.Release = *.
  Property (S): CAP_Gateway.OnHoldItems.Block = *.
  Property (S): CAP_Gateway.Track = *.
  Property (S): CAP_Gateway.Transport = *.
  Property (S): CAP_Gateway.Transport.Secure = *.
  Property (S): CAP_Gateway.Transport.CCM = *.
  Property (S): CAP_Gateway.Transport.Stationery = *.
  Property (S): CAP_Gateway.Transport.Stationery.None = *.
  Property (S): CAP_Gateway.Transport.Stationery.Select = *.
  Property (S): CAP_Gateway.Transport.Attachments = *.
  Property (S): CAP_Gateway.Transport.Attachments.Convert = *.
  Property (S): CAP_Gateway.Transport.Attachments.Metadata = *.
  Property (S): CAP_Gateway.Transport.Attachments.StripLink = *.
  Property (S): CAP_Continuity = *.
  Property (S): CAP_Continuity.Mailbox = *.
  Property (S): CAP_Continuity.Mailbox.ReceivedItems = *.
  Property (S): CAP_Continuity.Mailbox.SentItems = *.
  Property (S): CAP_Continuity.Monitor = *.
  Property (S): CAP_Continuity.Monitor.Auto = *.
  Property (S): CAP_Continuity.Monitor.User = *.
  Property (S): CAP_Continuity.Monitor.Admin = *.
  Property (S): CAP_Continuity.Enable = *.
  Property (S): CAP_Continuity.Enable.Auto = *.
  Property (S): CAP_Continuity.Enable.Admin = *.
  Property (S): CAP_Piits = *.
  Property (S): CAP_Piits.Management = *.
  Property (S): CAP_Piits.AutoMount = *.
  Property (S): Global.Service.AccountType = *.
  Property (S): Global.Service.Username = *.
  Property (S): Global.Service.Password = *.
  Property (S): Global.WebProxy.Enable = *.
  Property (S): Global.WebProxy.Type = *.
  Property (S): Global.WebProxy.URL = *.
  Property (S): Global.WebProxy.Username = *.
  Property (S): Global.WebProxy.Password = *.
  Property (S): Global.Settings.IgnoreLocal = *.
  Property (S): Global.AutoUpdate.URL = *.
  Property (S): Global.AutoUpdate.Enable = *.
  Property (S): Global.Logging.LogDirectory = *.
  Property (S): Global.Logging.MaxFileSize = *.
  Property (S): Global.Service.MaxRolls = *.
  Property (S): Global.Logging.Level = *.
  Property (S): Session.Pits.FolderSyncInterval = *.
  Property (S): Global.Piits.MaxMessagesPerFolder = *.
  Property (S): Global.Service.InstallDirectory = *.
  Property (S): Global.Service.DataCacheSize = *.
  Property (S): Session.Continuity.PreDupeDuration = *.
  Property (S): Session.Continuity.PostDupeDuration = *.
  Property (S): Session.Continuity.HardFrequency = *.
  Property (S): Session.Continuity.SoftDuration = *.
  Property (S): Session.Continuity.EndContinuityExchangeAvailable = *.
  Property (S): Session.Continuity.EndContinuityMimecastUnavailable = *.
  Property (S): Global.Feedback.Recipients = *.
  Property (S): DefaultUIFont = *.
  Property (S): MSIRESTARTMANAGERCONTROL = DisableShutdown
  Property (S): REBOOT = ReallySuppress
  Property (S): OUTLOOK_VERSION = Outlook 2010
  Property (S): OUTLOOK_BITNESS = x 86
  Property (S): ErrorDialog = ErrorDlg
  Property (S): SERVICE_DIR = Windows Service Mimecast
  Property (S): SecureCustomProperties = NETFRAMEWORK40FULL; NEWERPRODUCTFOUND; OLDAPPFOUND; PREVIOUSVERSIONSINSTALLED; WIX_DOWNGRADE_DETECTED; WIX_UPGRADE_DETECTED
  Property (S): MsiHiddenProperties = _LicenseAgreed; CAP_Archive; CAP_Archive.search; CAP_Archive.search.Basic; CAP_Archive.search.Builder; CAP_Archive.search.context; CAP_Archive.search.favourite; CAP_Archive.search.manage; CAP_Archive.search.quick; CAP_Archive.search.recent; CAP_Common; CAP_Common.options; CAP_Common.options.capabilities; CAP_Common.options.ChangePassword; CAP_Common.options.credentials; CAP_Common.options.network; CAP_Common.options.network.read; CAP_Common.options.network.Update; CAP_Common.update.manual; CAP_Continuity; CAP_Continuity.enable; CAP_Continuity.enable.admin; CAP_Continuity.enable.Auto; CAP_Continuity.mailbox; CAP_Continuity.mailbox.ReceivedItems; CAP_Continuity.mailbox.SentItems; CAP_Continuity.monitor; CAP_Continuity.monitor.admin; CAP_Continuity.monitor.Auto; CAP_Continuity.monitor.user; CAP_Gateway; CAP_Gateway.block; CAP_Gateway.block.address; CAP_Gateway.block.domain; CAP_Gateway.block.ManagedSenders; CAP_Gateway.block.ReportSpam; CAP_Gateway.OnHoldItems; CAP_Gateway.OnHoldItems.block; CAP_Gateway.OnHoldItems.moderated; CAP_Gateway.OnHoldItems.personal; CAP_Gateway.OnHoldItems.release; CAP_Gateway.track; CAP_Gateway.transport; CAP_Gateway.transport.attachments; CAP_Gateway.transport.attachments.convert; CAP_Gateway.transport.attachments.metadata; CAP_Gateway.transport.attachments.StripLink; CAP_Gateway.transport.CCM; CAP_Gateway.transport.secure; CAP_Gateway.transport.stationery; CAP_Gateway.transport.stationery.None; CAP_Gateway.transport.stationery.Select; CAP_Piits; CAP_Piits.automount; CAP_Piits.Management; DefaultUIFont; Global.AutoUpdate.Enable; Global.AutoUpdate.URL; Global.Feedback.Recipients; Global.Logging.Level; Global.Logging.LogDirectory; Global.Logging.MaxFileSize; Global.Piits.MaxMessagesPerFolder; Global.Service.AccountType; Global.Service.DataCacheSize; Global.Service.InstallDirectory; Global.Service.MaxRolls; Global.Service.Password; Global.Service.Username; Global.Settings.IgnoreLocal; Global.WebProxy.Enable; Global.WebProxy.Password; Global.WebProxy.Type; Global.WebProxy.URL; Global.WebProxy.Username; MimecastInstaller; PLATFORM; Session.Continuity.EndContinuityExchangeAvailable; Session.Continuity.EndContinuityMimecastUnavailable; Session.Continuity.HardFrequency; Session.Continuity.PostDupeDuration; Session.Continuity.PreDupeDuration; Session.Continuity.SoftDuration; Session.Pits.FolderSyncInterval
  Property (S): MsiLogFileLocation = C:\install.log
  Property (S): PackageCode = {6C9809C5-9DBC-4683-AE5F-3E05D53939EA}
  Property (S): ProductState = 1
  Property (S): PRODUCTLANGUAGE = 1033
  Property (S): CURRENTDIRECTORY = C:\
  Property (S): CLIENTUILEVEL = 2
  Property (S): CLIENTPROCESSID = 3672
  Property (S): MsiRestartManagerSessionKey = b9237eca8dffb44583db9105bf61f283
  Property (S): VersionDatabase = 200
  Property (S): MsiSystemRebootPending = 1
  Property (S): VersionMsi = 5.00
  Property (S): VersionNT64 = 601
  Property (S): WindowsBuild = 7601
  Property (S): ServicePackLevel = 1
  Property (S): ServicePackLevelMinor = 0
  Property (S): MsiNTProductType = 1
  Property (S): WindowsFolder = C:\windows\
  Property (S): WindowsVolume = C:\
  Property (S): System64Folder = C:\windows\system32\
  Property (S): SystemFolder = C:\windows\SysWOW64\
  Property (S): RemoteAdminTS = 1
  Property (S): TempFolder = C:\Users\TECH~1.SUP\AppData\Local\Temp\
  Property (S): CommonFilesFolder directory = C:\Program Files (x 86) \Common Files\
  Property (S): ProgramFiles64Folder = C:\Program Files\
  Property (S): CommonFiles64Folder = C:\Program Files\ Files\Fichiers
  Property (S): AppDataFolder = \\gblon-v-fp001\users$\tech.support\Application Data\
  Property (S): FavoritesFolder = \\gblon-v-fp001\users$\tech.support\Favorites\
  Property (S): NetHoodFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Network Shortcuts\
  Property (S): PersonalFolder = \\gblon-v-fp001\users$\tech.support\Documents\
  Property (S): PrintHoodFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Printer Shortcuts\
  Property (S): RecentFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Recent\
  Property (S): SendToFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\SendTo\
  Property (S): TemplateFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Templates\
  Property (S): CommonAppDataFolder = C:\ProgramData\
  Property (S): LocalAppDataFolder = C:\Users\tech.support\AppData\Local\
  Property (S): MyPicturesFolder = C:\Users\tech.support\Pictures\
  Property (S): AdminToolsFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start administration Tools\
  Property (S): StartupFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start demarrer\programmes\demarrage\
  Property (S): ProgramMenuFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start Menu\Programs\
  Property (S): StartMenuFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start Menu\
  Property (S): DesktopFolder = \\gblon-v-fp001\users$\tech.support\Desktop\
  Property (S): Font = C:\windows\Fonts\
  Property (S): GPTSupport = 1
  Property (S): OLEAdvtSupport = 1
  Property (S): ShellAdvtSupport = 1
  Property (S): MsiAMD64 = 6
  Property (S): Msix64 = 6
  Property (S): Intel = 6
  Property (S): PhysicalMemory = 4027
  Property (S): VirtualMemory = 5339
  Property (S): AdminUser = 1
  Property (S): MsiTrueAdminUser = 1
  Property (S): LogonUser = tech.support
  Property (S): UserSID = S-1-5-21-583907252-2049760794-725345543-5685
  Property (S): UserLanguageID = 2057
  Property (S): ComputerName = OSLLONPC052
  Property (S): SystemLanguageID = 2057
  Property (S): ScreenX = 1024
  Property (S): ScreenY = 768
  Property (S): CaptionHeight = 22
  Property (S): BorderTop = 1
  Property (S): BorderSide = 1
  Property (S): TextHeight = 16
  Property (S): TextInternalLeading = 3
  Property (S): ColorBits = 32
  Property (S): TTCSupport = 1
  Property (S): Time = 10:38:26
  Property (S): Date = 04/09/2013
  Property (S): MsiNetAssemblySupport = 4.0.30319.1
  Property (S): MsiWin32AssemblySupport = 6.1.7601.17514
  Property (S): RedirectedDllSupport = 2
  Property (S): MsiRunningElevated = 1
  Property (S): The privilege = 1
  Property (S): Name of USER = Oriel securities user
  Property (S): COMPANYNAME = Oriel Securities Ltd.
  Property (S): basis of DATA = C:\windows\Installer\14b48052.msi
  Property (S): OriginalDatabase = C:\windows\ccmcache\4\Mimecast4.0.msi
  Property (S): UILevel = 3
  Property (S): ACTION = INSTALL
  Property (S): OUTLOOK_INSTALLED = TRUE
  MSI (s) (54:F8) [10:38:26:532]: see clean files/packages, if there
  MSI (s) (54:F8) [10:38:26:532]: MainEngineThread returned 1603
  MSI (s) (C 54:4) [10:38:26:542]: RESTART MANAGER: closed Session.
  MSI (s) (C 54:4) [10:38:26:542]: sequence number number for this installation system restore.
  = Logging stopped: 04/09/2013-10:38:26 =.
  MSI (s) (C 54:4) [10:38:26:542]: strategy user 'DisableRollback' is 0
  MSI (s) (C 54:4) [10:38:26:542]: policy value 'DisableRollback' Machine is 0
  MSI (s) (C 54:4) [10:38:26:542]: meter is incremented to disable the stop. Counter after increment: 0
  MSI (s) (C 54:4) [10:38:26:542]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
  MSI (s) (C 54:4) [10:38:26:542]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
  MSI (s) (C 54:4) [10:38:26:542]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3:2
  MSI (s) (C 54:4) [10:38:26:542]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3:2
  MSI (s) (C 54:4) [10:38:26:542]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
  MSI (s) (C 54:4) [10:38:26:542]: restoration of the environment variables
  MSI (s) (C 54:4) [10:38:26:542]: object to destroy RemoteAPI.
  MSI (s) (54:B8) [10:38:26:542]: end of thread Custom Action Manager.
  MSI (c) (58:88) [10:38:26:542]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
  MSI (c) (58:88) [10:38:26:542]: MainEngineThread returned 1603
  = Recording stopped: 04/09/2013-10:38:26 =.

  Appreciate that any direction. Seems that maybe the MSI package might have broken this machine

  Hi Dan,

  This computer is on a domain network?

  I suggest that post you the question in Mimecast forums for more information support:

  Support community-powered Mimecast

  https://community.Mimecast.com/Mimecast

  Hope this information helps.

• Is it possible to create a variable that tells you what slides, the user has visited?

  Hello.

  I'm working on a project where I want a slide to display a button continue and hide the 2 areas of text, but ONLY when the user has already visited 2 other slides. I can only find variables indicating the slide the user previously visited.

  Is it possible to set a variable that does this?

  I want to create the following advanced measures:

  If the user has visited slides 62 AND 87, image_536 to show and hide text_caption_243 and text_caption_242

  I don't want action be executed if only 1 2 slide have been opened - it must occur when the two were opened.

  Hope that makes sense.

  I use 7 Captivate.

  Thank you.

  You will need two variables, it can be Boolean values. I will label them v_one and v_two with a default value of 0

  Because I don't know how the slides are formatted, do you use a Next button or are all visited media executives? You will need to have an event on the two blades to trigger an action:

  Assign the v_one with 1 slide 62

  And a similar action on the other slides to alternate v_two (do not use the toggle command, if the user accesses a slide twice, it could be toggled to 0).

  
  

  You do not specify where these text containers need to be (please, label your objects and slides)? But you'll need advanced conditional action triggered by another event somewhere:

  IF v_one is equal to 1 AND

  v_two is equal to 1

  See the Text1

  See the Text2

• How to call user B to drop/create an indexes on a table owned by the user has?

  Hello!
  We have the following situation:
  = > user B has a table that has an index
  = > user connects to the database and must have sufficient privileges or the ability to drop/create an index for a table owned by the user B.
  Since there are several different schemas in the database, it is not possible to grant the privilege "to create any index' or 'delete any index '.
  for the user.
  = > to do even more complicated: the necessary procedure must not belong to user B
  
  I tried to solve this problem with a stored procedure (which belongs to user C). Why do we use user C? C the user has several packages,
  procedures and functions that get used by other users (for example for purposes of logging, refresh materialized views,...)
  
  So the logic is:
  = > user A calls user procedure C. In this procedure the call "run immediately" ALTER SESSION SET CURRENT_SCHEMA = B' "»
  is executed successfully. The next step, the < drop index B.i1 > statement would get executed. But this statement fails with the
  exception ' ORA-01031: insufficient privileges ".
  
  If this procedure is created in the schema of the user B then everything works fine - but because of our current design of the database, this procedure
  must belong to the user C.
  
  Does anyone know a solution to this problem?
  
  Any help will be appreciated
  
  Rgds
  JH

  I think you need the privilege DROP_ANY_INDEX directly to user C.

• How to determine that the user has purchased an article or not?

  Hello

  Can someone tell me how can I determine if the user has purchased an article or not?

  Until now, I add to the cart and then allow user to pay for this item through Paypal. But now, my goal is to show all these items that the user has already added, but not bought yet.so, whenever user logs in a/c, he can see the item in my cart.

  Please... help me

  This sounds like a question of PayPal, then you will want to check these forums. If you were using in-app purchases of BB, so yes, it has an API to check the previous in-app purchases.

• which detects that the user has changed the clock of the device?

  Hi all my application dependent on the clock time in the device settings. who can my application to detect if the user has replaced the unit time? Thank you

  Salvation;

  It's the Question2:

  and I found the solution:

  bps_initialize();
  Subscribe (clock_get_domain ());
  clock_request_events (0);

  void ApplicationUI::event(bps_event_t *event) {}
  unsigned int dcode = bps_event_get_domain (event);
  If (dcode is {clock_get_domain()})
  unsigned int code = bps_event_get_code (event);
  if(code == CLOCK_INFO) {}
  Q_EMIT dateorclockuserChanged(); signal function qml
  }

  }
  }

  Thanks a lot for your help

• Design requirement has evolved, savings where the user has navigated to.

  Continuing this thread: http://supportforums.blackberry.com/t5/Java-Development/Confirming-a-design-where-I-need-to-save-whe...

  Requirements have changed.

  I now need to save the position on the screen where the user has navigated to once the screen has been redesigned.

  Specific screens are relayed on and painted according to a TimerTask. Once the screen again, I must automatically reposition / scroll to the position that the user was on the screen.

  For example:

  1. A user can leave a screen open for ten seconds.
  2. A user scrolls down to 3/4 of the way down.
  3. Once this time is up, a TimerTask is executed and redraws the screen with new data.
  4. If the user did scroll down in a VerticalFieldManager 3/4 of the way down, once the screen is redrawn the user must be back to the same position - 3/4 of the way down in the VerticalFieldManager.

  Ideally, I would like to save the XYPoint and then reposition the screen for the XYPoint recorded - a small prototype needs to be done for my part, granted.

  However, is there a better design or any who has implemented this feature before on OS 5.0.0?

  Thank you.

  I did so with a Manager (s) personalized using the recursively offset of vertical scroll through the stack of Manager as suggested by Peter, but be aware that you must not only parchment of, but the position is within the screen/Manager to follow the actual position of the screen against the perceived one. Here is the code that I use in my manager with my custom functions:

  public final int getAbsoluteY(){
     int absY = (getY()+drawY);
     while( getManager() instanceof CustomLayoutManager ){
        return absY + ((CustomLayoutManager)getManager()).getAbsoluteY();
     }
     return absY;
  }
  

• What opening of database Service of Cloud Computing console receiveing "the user role cannot access the Cloud database Service" message and see no service. Why?

  What opening of database Service of Cloud Computing console receiveing "the user role cannot access the Cloud database Service" message and see no service. Why?

  Thank you in advance.

  Try now

• Check if the user has selected box element apex before the loading of the page

  4.2.1

  THM:2

  Hello world

  I have two classic reports with different conditions but even select the columns based on a sql that uses the apex_item.checkbox2 element that allows users to select the lines and run some process. I also have a radio unit that hides and shows these two reports. However, it is possible that the user select a few lines and without doing anything click on the radio button that will present the page and all the lines that earlier he had chosen will be lost. I want that we should be able to pop an alert if there are checkboxes checked and the user tried to hit the button of the radio looks like the APEX_APPLICATION. G_F01. Count is not available at the time the page is submitted. We thought to use a pl/sql to see if APEX_APPLICATION DA. G_F01. Count > 0 then trigger an alert to confirm.

  Any ideas on how to do this?

  Thank you

  ryansun wrote:

  Hi FAC586 - basically, there are two parts of the report, were grouped products consolidated (as master) and the other report has all the products of the child. So based on the option the user selects that he sees who discovers and processes information.

  I tried to create the DA, but he does not seem to fire and I'm sure it would be because I have something wrong.

  No, in this case, there was a typing error in my JS expression above (this is what happens when there is no example in the trial against...)

  Must be:$('td[headers="COL_ALIAS"] input:checked').length > 0

  I have page submit on the evolution of radio, given that other elements of the actual application, don't do with this feature which is filled on the loading of the page.

  It does not work. If the present radio on the presentation changes group cannot be controlled by the dynamic action to confirm that it has already been committed before the confirmation message is displayed. Presentation must be made by further action of real on the DA. By the way other values is possible by using dynamic actions or region to submit elements of Page properties.

  But here it is necessary, if the user has activated all the lines, then changes the selection of the radio, it should show an alert to confirm. In addition, what happens if we have a very select in the box by a header label already. Can I use the same label to identify the COL_ALIAS?

  Do not understand the question.

  Don't know what I'm doing wrong.

  As I noted above, an important part of your problem is that you asking what amounts to a series of questions XY rather than the big picture given by presenting the necessary resources. You have been really good on the creation of examples on apex.oracle.com, but they are all fragments of the righteous, which makes things difficult when you try their synthesis in something that works as a coherent whole. Various bits and pieces that have been revealed in recent weeks, it seems like this could be treated using dynamic measurements without having to send the page until the final choice has been made.

• I just added a new user and it says the e-mail was sent, but the user has not yet received it. Y at - it a period?

  I just added a new user and it says the e-mail was sent, but the user has not yet received it. Y at - it a period?

  Anyone had this same problem? I'm doing something wrong?

  Hi Jesse,.

  Please follow did not receive expected Adobe email

  I hope this helps!

  Kind regards

  Sheena