Cannot open backup files. Error "user has no access privilege.

Similar Questions

• Cannot open the file resource user interface

  Hi all

  I have to do an interview on a 2000 project (don't remember what version of the CVI was). I have 10 files IUR in the project and open all fine in the IDE, but one. I get the following message: "cannot open the Pnl_Main.uir user interface resource file (suddenly reached the end of the file).

  I've checked all my backup and they are all identical, so if there is a file corruption, he is old enough.

  In any case, here is the file, in case, can someone tell me what is wrong with him, or maybe open and re-record with an older CVI in case it's just a problem of version...

  
  

• "Extraction failure: cannot open output file" error message when installing new drivers

  Hello, I am trying to install new drivers for my HP Photosmart C4385 printer.  I downloaded the complete drivers of features for Windows XP 32-bit, and when I start to install (extract), I get the error message:

  Extraction failed

  Cannot open output file

  And the process ends.  He arrived at about 85% extraction every time.

  No idea why?  I called HP, but no longer under warranty they wanted money, which I think as absolutely ridiculous - not even give me basic support?  Poor, poor customer service.

  Hi GIJeff12,

  Temporarily disable any AntiVirus/Antispyware software.

  Cut the installer on your desktop then click on the Start Menu, click computer, double-click on the C: drive and paste the installler here.  Now try a right click on the installer for your printer, choose 7-Zip and choose Extract the files, and then click Ok.  If the installation program extracts now correctly, follow these steps.  If it does not extract, let me know.

  Disconnect your printer from the PC.  Restart your PC.

  Open the newly extracted folder and double-click the setup application to start the installation (the installation application will probably have the same icon as the original installation software that you downloaded).  Connect the printer to your computer when you are asked.

  If it was a success, re - enable your security software.

  Best wishes

  DP - K

• CC of InDesign cannot open the file - error: recorded in a later version (CS7.0)

  My colleague and I have implemented CC accounts last month (updated for CS5), but now when I'm trying to open a file, she led recently I get this error: "cannot open 'file name.indd' because he was saved with a newer version of Adobe InDesign (CS7.0). You must use this version or later to open the file. To then allow him to open up in this version, click Save as InDesign CS4 or later version, or exporting to IDML. »

  Both are PCs. We use the same software, it seems so I'm confused as to the version of CS 7, she saves in and does not allow me to open the file.

  Any suggestions?

  Your cowoker has installed InDesign CC and you always run CS6. You

  can install CC creative.adobe.com

• Captivate cannot open the file error

  VERY simple project generates the above error.

  Menu screen with buttons related to files F4V inserted as «drag videos»  The videos are large files and run in 1024 x 768. It records correctly after compression of time looong and does not open. This only happens after that I inserted slide videos and related buttons.

  The error says "cannot open file XXXXX. Ensure that this file is not open already etc... »

  I did a ton of times before and may not know what is happening.

  Thud...

  You try to insert videos 6 x 1 hour (6-800 meg) in a single project Captivate that ends up being 4.2 GB in size... and you wonder why Captivate has decided, that it can not open it?

  I think that you were right. The file is simply too big.

• Cannot run .exe files error: service has not responded to the application launch or control in a timely

  Original title: Windows 8 download EXE files does not work... MSCONfig nor the desire even of the DOS command prompt

  Windows 8-files downloaded EXE will not run to message

  «the service did not demand launch or timely control»

  Windows Defender icon appears next to change the settings so I can't edit or run them even if I am administrator

  I have Norton Anti - virus question while running is probably NOT a virus. Repair and restore won't work either

  All the solutions for especially appreciated

  Hi John,.

  I suggest you follow the advice given by Anil Kumar B responded on January 17, 2013 in the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/unable-to-open-exe-files-with-Windows-8/61a4a39c-FAEF-46e7-BE80-9653cc3addda

  Please keep us informed on the status of the issue to help you further.

• The user has no access privileges

  5 minutes ago I up to a document saved as normal, then closed Microsoft Word. Now, on double click on the file, it says that I don't have access privileges to the exact file that I just created. I'm the only Admin and I was clicking on Security - Advanced nothing helps. Help, please.

  Thanks for your reply. This sometimes happened to a few files I have, some Word and PDF files. When I open the word, the line is literally "user lacks access privileges > (menu)" and the file does not open upward. Adobe Reader is usually not responding when I double-click on these files to 'bad '.

  The properties-> Security tab says, "no group or users have the permission to access this object. However, the owner of that object can assign permissions. "I found a way to restore access to the security-> Edit object-> by typing 'users' in the box that says"Change the names of the objects to select"and give me a 'Full Control' by checking the box. So thank you, in the short term my problem is solved. But if you have any ideas on why this happens randomly some files, I would be really happy.

• Make a right click 'open with' file error command has associated program

  When I use Windows Explorer (XP, OS), click 'Open with' 'another program' right I get this error: "this file has no program associated with it for performing this action. Create an association in the Folder Options Control Panel. " He has never done this before and I can't identify when the problem started. Please do not suggest a repair installation because I don't have enough disk space, and way to many programs installed to a new installation. There must be a registry fix somehow. The Windows registry is the most useless way to track information on the program I've ever seen. It's a problematic piece of * to say the least.

  Hi strFileName,.

  Follow the steps in the article.

  How to change or choose the program that starts when you double-click a file in Windows XP

  http://support.Microsoft.com/kb/307859

• Cannot open a file error where zip is a "compressed (zipped) folders error". Windows cannot perform the extraction.

  Original title: loading with a password required

  I'm trying to open a zip via windows 7.  Same error occurs on windows xp.  There is a "compressed (zipped) folders error" error  Windows cannot perform the extraction.  The destination file could not be created.

  I recently got 8 deleted window and window 7 set in... I've never had a problem before

  Hello

  1. Using default Windows 7 application or any other 3rd party application?
  2. What type of file you are trying to open?
  3. You try to extract the zipped file documents? If so where are you trying to save?

  I suggest you try these methods and check the status of the issue.

  Method 1

  Try using Windows to extract the zipped files

  http://Windows.Microsoft.com/en-us/Windows7/compress-and-uncompress-files-ZIP-files

  Method 2
  Perform the check and the boot if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

• Problems with word and PDF after computer crash. Error "user has access privileges."

  Problems with word and PDF after crash

  My computer crashed and I had to run the recovery disk, the repair option, so he could run again. It does not format my computer but I had to re - install several programs. I reinstalled my copy of office for example.  I have an external hard drive where I put most of my files but since installing the recovery disc, it does not open some Word documents and gives a message error "user has not access privilege." It's the same thing with some pdf files. What can I do?  Please help because I can't open some of my documents from the University.

  Hello world
  I would like to just say thank you for your help and the problem is now solved.  In the end I paid someone to sort it out.  He explained that it was something like permissions for some of my files were owned by my old operating system and after that my computer crashed and I had to put through the recovery disc these permissions have been lost.  He told me that he had a program that looked for the old existing and re-installed.
  Thank you.

• Cannot open JPG files in photoshop, error "could not complete your request because the file is not found.

  Cannot open JPG files in photoshop
  Has anyone ran into this problem? Photoshop worked perfectly in the past and the other day I noticed that I can't open all the jpg files in Photoshop (tried all the usual ways to circumvent the opening problem), I get the error message: "Could not complete your request because the file was not found." I know that JPGs are fine, as they open in other applications. My work-around for the moment, is to open in preview mode before and export as a PDF file, then open the PDF file in photoshop, however, this is not ideal.
  Someone at - it in the case, or have a fix
  Any help much appreciated

  Dan

  Hi Dan,.

  Please install camera Raw from following link: Camera Raw of Adobe Photoshop CC and CS6 Installer

  Once done, open file Jpeg, you shouldn't get the error more.

  Let me know if it helps.

  Kind regards

  Tanuj

• fatal error C1083: cannot open include file: 'NiVisaComponent.h': no such file or directory

  I found the error of => niincludes.h (18) : fatal error C1083: cannot open include file: 'NiVisaComponent.h': no such file or directory

  I checked a few path, "C:\Program Files (x 86) \National Instruments\MeasurementStudioVS2005\VCNET\Include.
  I found a lot of files, but only does not NiVisaComponent.h, anyone know how to download or is this file has changed the name?

  I already install the driver NI-VISA v15.0 but still does not have this file.

  I have not "C:\Program NIUninstaller Instruments\MeasurementStudioVS2005\VCNET\Include" because my laptop is 64-bit.

  Hello

  If you see the file Readme VISA 15, you'll see that Visual Studio 2005 is not supported. It seems that the most recent version of VISA that supports VS 2005 is Version 5.2 for c# / VB.NET and 5.0.2 for MFC C++ (with Measurement Studio 2009).

• should I update windows so I changed my destop for files archive programs and now cannot open also my Start menu has also changed

  should I update windows so I changed my destop for files archive programs and now cannot open also my Start menu has also changed

  Hi acrhive Rar.

  Unfortunately, there is no way to cancel the option archive other than to do all the files one by one.

  If you used the shortcuts application option, then I will suggest you to create a new user account and check
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  He should also take care of the start menu.

  Concerning
  Terminator

• Error message - Windows cannot open this file after downloading program

  After several days in offline mode, I went online to update Microsoft Security Essentials and click on analysis complete.  It took an hour.  After that, I found that all my programs were virgins, almost of all of the standard microsoft Microsoft Security Essentials is.  I tried to download it again, plus others such as adobe acrobat, but all said "windows cannot open this file".  I asked help from Microsoft but received access denied.  I feel like an illegal immigrant, as all the doors were closed.  What does that mean?  My OS would be illegal?  It is Windows XP and was purchased new in the retail price in 2004 and has only once been out of my hands when I sent it repairs and have 2 GB ram added.  Any ideas?

  Hello

  1. What is the full and exact error message?

  Try the steps from the following link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/when-trying-to-open-desktop-icons-get-message/e75fd1c3-F772-E011-8dfc-68b599b31bf5

  I hope this helps.

• I want to play Freecell and solitaire that came with my PC, but I get this error: "Windows cannot open this file: free cell.exe.mui.»

  Can help please I want to play freecell and solitaire that came with my pc but I get this error message... Why would he do that? How can I solve this problem?

  original title: windows cannot open this file: free cell.exe.mui.

  Hello

  1. don't you make changes to the computer?

  These can help you:

  Method 1: Perform a system restore

  To get the procedure perform system restore, open the site mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Method 2: Clean boot

  For the procedure to place the computer in a clean boot, open the site mentioned below

  http://support.microsoft.com/kb/929135.

  Note: To set the computer back to start normally, use the step 7 in the same link.

  Method 3: Check the new user account

  Open the site mentioned below for steps to create a new user account

  http://windows.microsoft.com/en-US/windows-vista/Create-a-user-account.

  I hope this helps.