the user starts the application by clicking on a file

Similar Questions

• FaceTime will not open on my Macbook pro (el capitan).  Message: "FaceTime close unexpectedly.  Click Reopen to reopen the application. Click report to display more detailed information and send a report to Apple. "Please help me.

  FaceTime will not open on my Macbook pro (el capitan).  Message: "FaceTime close unexpectedly.  Click Reopen to reopen the application. Click report to display more detailed information and send a report to Apple. "Please help me.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Displaying folder instructions directly in the window without clicking on a file

  To help the team to determine what type of content is allowed in a windows folder is there a way to show the instructions directly in the menu bar of a window. I find that most of the people do not click «instruction.txt» files This would strengthen the standardized process that would be covered in separate documents.

  I wrote in where I would like to see the statement shown on the window menu. Just an example, but something like that.

  Sorry, this feature does not exist in Windows.  Although it is certainly possible for anyone to write their own program to do.

• During the application of air download (COD files)

  Do I have to prepare a file for each version of Blackberry, I would like to have my application runs, that is to say of cod and jad. one for 4.5, 4.6.0 4.6.1 4.7?  Or is it enough to compile for 4.5 and it will run on the whole?

  What is the best?

  It is up to you.

  You can compile on 4.5 and move on all 4.5, up - but you may not be happy with the results, especially with the storm.

  We are currently building for 4.2.1 4.5 and 4.7. Our download page to detect the OS level and model of the device and redirects the browser to the correct JAD file.

• C:\Windows\System32\Rundll32.exe, the Application is not found. (executable files does not either.)

  I recently had just some malware on my Vista saying that it was infected and that it had been hijacked, but I just ignored and finally got rid of him, but now that I managed to get rid of it none of my executables will be run and the touchpad scroll my mouse touch (I have a laptop) now no longer works.  And I can't access settings of the mouse because whenever I try an error pops up saying that the Rundll32.exe is missing.  In any case, the malicious software that I've been having troubled by claimed to be Vista (don't remember if the next word was security or anti-virus) - but it was called Vista? 2010, Vista Security 2010 thing.  However, I can never remember install such a file, and I don't have no automatic updates so if I got something like that Microsoft it would at least go back to 2009, if not 2008.

  You obviously put a lot of work into this response, but the OP will not be able to run any executable at this stage and your malware removal steps are incorrect. The only part you're right was that the OP has been infected by a rogue security program (not ' red').

  For "spread anonymously:

  First use Doug Knox fix for .exe association:

  http://www.dougknox.com/XP/file_assoc.htm

  Then follow the steps below to make sure that the computer is clean:

  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

  These can work for you, and all can be good. However, in many cases the computer will also infected with other horses of Trojan and protected by a rootkit. These machines are extremely difficult to clean. If your machine is one of these cases, either the interactive assistance to one of the specialty forums listed in the link below, OR take your machine to a professional on the local computer OR backup your data and do a clean install of Windows. It's your choice. I do not recommend using BigComputerStore/GeekSquad types of places.

  http://www.elephantboycomputers.com/page2.html#HJT-links MS - MVP - Elephant Boy computers - don't panic!

• 3 seconds delay after the application icon was clicked...

  I can't understand the following situation:

  When I I click on my blackberry application icon (in the Simulator), the application is fast, no problem. However, when I take that same code and place it on my blackberry, there are a few seconds of waiting time after that the icon has been clicked.

  can someone tell me how to reduce the delay? the first screen is nothing else than an image within an image field. I wanted to create a "splash" screen and I just show you a simple picture.

  After I click on the icon of the application (on my phone), I notice that there is activity because you see the arrows at the top right moving. but the user regular to non-techie, they do not know that the application has been started and they will just keep clicking on the icon over and over again.

  again, I click on the application icon and there are about 3 seconds just to show the image contained in the file of the project. If we're not going get the image from a remote site.

  the Simulator shows the quick image, but the phone creates a delay. any ideas how to minimize the delay on the application icon, click on?

  Thank you.

  CA

  I thought about it. I just moved the instantiation and several objects of a different class loading and later called these lines of code with an invokeLater method. My first screen contains only the image itself and the other class the rest of the code.

• Invoking the application when you click on a link in the browser field

  Hi all

  Is it possible to invoke the application by clicking on a link/button to the browser field?

  The link/button would be a part of the web page displayed in a browser field. If the user clicks on it, it should be taken to the corresponding screen in the native application.

  Can someone let me know how this can be done in BlackBerry?

  Thank you much in advance.

  I could it implement successfully with the help of HTTPFilterRegistry (net.rim.device.api.io.http.HttpFilterRegistry).

  An example of the same project is available in the samples of BlackBerry in the Eclipse IDE (HttpFilterDemo).

• Name of the application (CodeModuleGroup) and the friendly name if installed in Blackberry App World

  Hi, expert,

  As we know, to the blackberry device, only one application is listed as CodeModuleGroup. Each group code module can have a group name and a friendly name. Based on my experience of test, for this software: http://appworld.blackberry.com/webstore/content/38406,

  group name: iSpeech Translator:iSpeech.org

  friendly name: iSpeech translator

  So the group name is :, which is always like this or the user can change the name of the group as they want?

  Moreover, the convention of group name is the same as the name of the group for the applications installed from a JAD file.

  Thanks in advance for your understanding.

  Downloaded app from AppWorld is every time the same naming convention: name app + name of the seller. If you install your own server via JAD you get usually only the name of the application under the name of CodeModuleGroup. It does not really affect the installation, I've updated installed OTA app with AppWorld version and vice versa, no problem at all.

• How to deploy the application by using a file single .cod.

  Hello

  In my application, I'm Ksoap library. So I created a library for Ksoap project. and my application depends on this library project.

  Now, when I deploy the application, I need to install 2 .cod files

  1 - Ksoap

  2. my application.

  Is it possible, so that I can deploy the application with 1 single .cod file.

  The user must not install 2 .cod files. One .cod file should be enough so that he can run the application.

  Yes. In an alx file, you can simply add Ksoap_Library.cod in the tag.

• How to upgrade the application through Blackberry Desktop

  Hello.

  Situation of Stange. Could you please give me a hint, how do I overcome that?

  1. I've compiled and signed the application. Alx file created. Two files are created "bb_application.cod" and "bb_application.alx".
  2. I run Blackberry Desktop, ran the Application Loader and specified my project as the location of the files folder and installed the application.
  3. I decided to change something in my application. I changed the code java, recompiled and signed the application. And also alx-file created.
  4. I run Blackberry Desktop, ran the Application Loader and saw that my request is already shown in the window of the Application Loader that checked. When I clicked on the button "Add" and specified the location of the updated alx file I get the following error: "no additional applications designed for your device were found".

  How can question - I change application already installed without uninstalling? If I uninstall this application - all the information stored in the store persistent will be lost.

  Here is my point of view on what is happening here.

  You have added an alx for the application loader, so that he knows that cods you attempt to load on the device.  If you add an another alx with the same cod, he rejects this, by you saying "no additional demand.  In this case, it should probably say "cod application already added.

  Now the application loader is sometimes his own worst enemy, but he tries to be smart and it will remember, for every alx you added, the level of the alx.  So if you change that alx to a level later, the application loader will tell you, that you need to update.  If change you to a previous level (i.e. lower) it will tell you are without downgrading and then ignore the downgrade (which can be a bit annoying...).  Doing so, in my experience, it takes without notice of the date of compilation of the cod file - this only on the level in the alx details.

  So in your case, you simply update the alx that points to the application loader whenever you put cod involved level (and sign)...

• 'Always available offline' is not visible when I right-click on a file in the network.

  I assumed that putting computers in a home group could solve the problem, but I get an error that IPv6 is not available.

  Connectivity IPv6 is not supported by my router (linksys WRT150N).  Y at - it solution or a wireless router that works?  I am running Win 7 Pro 64 bits on a computer and Win 7 Pro 32 bit on my laptop.  I can see the network files and transfer them OK.

  What I really need to work is the offline files feature.  When I see the network files and right-click on the files, the option 'always available offline' is not visible.  I have to be in a homegroup for offline files work?

  Hi DickCookVS

  If the offline files option is disabled, you will need to enable it, if you want to work with files offline to a network folder.

  a. open offline files by clicking the Start button. In the search box, type offline filesand then in the list of results, click manage offline files.

  b. on the general tab, click enable offline files.

  You will need to restart your computer for the changes to take effect.

  
  See the help link - below

  http://Windows.Microsoft.com/en-us/Windows7/working-with-network-files-when-you-are-offline

  http://Windows.Microsoft.com/en-us/Windows7/libraries-frequently-asked-questions

   

  I hope this helps.

• report interactive apex 5, pivot action does not display columns in the application developed on 4.2.6

  I just installed apex 5.01 on apex 4.2.6.

  When I want to use the pivot of the action on an interactive report developed on 4.2.6 the names of the columns does not appear.

  If I add a new column, it seems

  calculated columns displayed

  Thank you

  Hello

  The pivot must be enabled for these columns.  To do this, you can upgrade the application developed in 4.2.6 as follows:

  -Click on the application

  -Click utilities

  -Click on the Application upgrade

  -Activate the IR Pivot should appear.  Click on the number of candidate object

  -You can select some or all of the IRs to upgrade

  Kind regards

  Christina

• No update for lightroom (4.1) with the application manager.

  Why it is not possible to update lightroom (creative cloud) with the application manager? That said, I use the latest version (4.1). But the most recent is 4.4. My lightroom 4.1 is buggy...

  Try to go to the Manager of the Application and in the applications menu, click the Lightroom, because it would be showing the latest version that is LR 4.4.

  It will go to aehad and install the same on article 4.1 of the LR

  -Florian

• Place the ini file in a specific location when the application generating

  Hello

  I have a little problem.  I have an ini file that I use to store some settings.  Lets call this app.ini file.  When I build the Application.exe, it puts this file in the data directory.  I was hoping that it would be at a higher level and be located in the same directory as Application.exe is (otherwise it will not read the file correctly.)  Looked at the settings of the Source file in the list of categories in the Properties window for the construction and all the 'Identical to the appellant' Destination, but he did not where I wanted.  I would really like this file to a directory higher when I do my build so that my application to read correctly.  Any suggestions?

  I use this executable then when I do my Installer and the problem just spreads here also, not good.

  One way to solve the problem:

  (1) in the build Properties window, select Destinations and create a new destination. Select the same directory where the exe file will be stored as 'Path of Destination'

  (2) assign this destination in the .ini file.

  Let me know if it works

  Marco

• Size of the application icon

  Application of BlackBerry Torch icon big what should be?

  Best practice: design of icons and indicators for the BlackBerry 6 theme

  • Create icons that are compatible with the default icons in the size, the weight and balance.
  • Create 32-bit .png files.
  • In the toolbars and context menus, create icons with an average size of 33 by 33 pixels. These icons appear on a canvas 60-by-40 pixels and must have a negative space.
  • The application icons, create an icon file that does not exceed 68-by-68 pixels. This size includes the canvas. Keep the weight of the icons within a space of 49-by-49 pixels. Smaller items can extend beyond this size, but the icons should not exceed 55-by-55 pixels. If the icon specified in the Web exceeds this size, it could be scaled down and upset the thicknesses and the slopes.
  • Create icons for application with four components: base, line drawing, reflection and light of bounce.

  Hello. I found this in

  http://docs.BlackBerry.com/en/developers/deliverables/17965/BlackBerry_6_icons_and_indicators_115202...