The virtual computer policies are too old to be run by this version

Similar Questions

• Error message: «the virtual network on the host computer drivers are incompatible...» »

  Just bought a new computer that is running Windows Vista Ultimate 64-bit.

  I installed VMWare Workstation 6.5.1 build 126130.

  I copied on a machine virtual from the old computer (running Windows XP Pro and VMWare Workstation 5.0.0 build 13124). I improved this VM Workstation 6.5. This virtual machine is currently running Windows XP Pro.

  When I run the virtual machine on the new computer, I get the following error message:

  "The virtual network on the host computer drivers are incompatible with the installed application of VMWare. Version expected 5. Please reinstall the product. Virtual device Ethernet0 will start disconnected. »

  Note that the virtual machine runs; I don't have any network capacity.

  I read the thread http://communities.vmware.com/thread/186731, who seems to have the same problem. He had installed 6.5 on 5.5; When he uninstalled and deleted all of the directories, and then reinstalled everything went well.

  I don't have any product VMware existing on the computer that would cause this type of conflict.

  So, what should I try to fix this?

  Thank you

  Wayne

  If you want to install only vmnetadapter, open cmd as admin in vmware workstation dir and run;

  "rundll32 setupapi, InstallHinfSection VMnetAdapter1.Install 128% CD%\netadapter.inf"

  You can also repeat for vmnetadapter8.

  If it does not run as above

  "vnetlib - install devices.

  Joakim

• I can longer open attached pdf files. I am able to preview the files, but they are too small for me to read.

  * Original title: attachments

  Help, please.

  I did something wrong (AGAIN!)

  I had no problem with access to attachments to my e-mails, but a problem occurred just.

  I can longer open attached pdf files.  I am able to preview the files, but they are too small for me to read.  When I click to open all the I get now is a kind of icon (in Microsoft Office Picture Manager) with which I can't do anything.

  It seems I should have arranged for Picture Manager automatically opens attachments to emails, but when this happens, I'm stuck as what I try, I can't do pdf files appear as they did.

  The help file does not really help.

  I hope it is something simple, even an old fool like me can do with your expert (and, I hope. friendly) help.

  My fingers are crossed.

  My apologies if I offended Protocol - this is my first venture.regards

  Octogenarian John

  PS My usual guru (aka grandson James) has acquired his first girlfriend, is not so disinclined to waste time me tutoring on the PC

  Create a file association.

  1. download and save the attachment to the office.
  2. right click on the saved file.
  3. Select: Open with on the shortcut menu.
  4. click on: choose [default] program.
  5. Select: (Whatever you have installed a PDF reader).
  6. check: always use the selected program to open this type of file.
  7. click on OK.

  This should allow you to open these attachments directly from email address now.

• Strange problem after moving from the virtual computer to a new data store

  I am migrating our VM existing (8 in total) a 'problem' RAID to a new table on a new controller and am having a strange problem. Here are the steps I took (host OS is Ubuntu 8.0.4 LTS x 64):

  (1) off the power the virtual computer from the Web interface

  (2) the directories created for each virtual on the new RAID array computer (in this case a RAID 10 array on LSI 9750-8i controller)

  (3) rSync used to copy the data from RAID1 to be RAID2

  4) has created a new data store on the new RAID through the Web Server of VMWare user interface.

  (5) removed VM of the inventory through the Web, their return, added user interface then choose files .vmx on new data store on RAID2

  They have all power save fine... but three of them are not accessible on the network. I can open a console in the Web Server of VMWare user interface and they all run normally... but I can't their ping or access the respective virtual machine Web GUI. It seems quite arbitrary that those who work and those who are not. In this case... the VM that don't work is a license Autodesk, a Squid proxy server and a VM of cactus. All three of these virtual machines are 32-bit Ubuntu Server VM (two 8.0.4 and a 10.0.4)... and are the only Ubuntu VM on this host. It must be signifigant but I'm not see how.

  If I delete these three virtual machines of the inventory again and add to their original location (on the RAID1) they light up AND work normally. A consultant that we were working seemed surprised, as he had also done this experiment with some of the older VMWare products. I don't see how it would be the physical location of the files of the virtual machine. Any ideas?

  We rely on the migration to ESXi soon but in the meantime, we get these a few VM out of this RAID array problem. I'm stuck.

  Depending on the application, it may be enough to reconfigure the IP parameters (they are very probably on DHCP now) for the newly detected virtual NIC.

  André

• Script to rename the virtual computer by name DNS listed in VC

  I am very new to powershell, and I tried to understand this by using pieces of code I found, but nothing helped.

  I'm looking for a script to take the given DNS host name for a virtual machine listed in VCenter and rename the virtual computer.

  For example.

  Host01VM01 (as shown in Vcenter) - the DNS name of the "something.xyz.com".   VM and rename it "something.xyz.com" in Vcenter.

  To run the script only for a group called "Mycluster" you can do:

  Get-Cluster "My Cluster" | Get-VM | `
  Where-Object { $_.Guest.HostName } | `
  ForEach-Object { Set-VM -VM $_ -Name $_.Guest.HostName -Confirm:$false }
  

  This script will only work for VMS that have installed VMware tools and probably only for VM which are turned on.

• Is it possible I can get the virtual computer connectivity after restart to connect to the local network in the host operating system?

  Hi all

  For some reason, I have to disable and then enable the LAN connection in the host operating system. If some virtual machines are running during this time, connectivity all VMs for out-of-world are lost, they cannot connect to the host even more (by running the ping command). I tried a few methods to retrieve the connectivity, but all have failed, for example,

  1. reboot the virtual computer

  2. restart VMware Workstation

  3. restart the corresponding system services in the host operating system

  The only way I can retrieve all is to restart the host operating system itself.

  Yes, is there short any path, I can retrieve the connectivity of these virtual machines?

  Thanks in advance.

  Yark

  yarkwang wrote:

  I use a Broadcom NetLink (TM) Gigabit Ethernet NIC, shows the date of the pilot 2006-5-15, but it works well, I think.

  Try installing a newer driver.  According to the site, you should be able to find a driver dated 2008 or 2007 (depending on which exact model of NetLink card you have):

  - http://www.broadcom.com/support/ethernet_nic/downloaddrivers.php

  1 came out of safe guard 360

  Sometimes out of some firewall programs is not enough (they keep still themselves installed in the network of the host stack, even if they are 'closed').  You may need to uninstall to make sure that it is not interfere.  (Search the forums for support for your firewall software see if anyone else is having problems with vmware and 360 safe guard).

• Running game - this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program

  I'm having the same problem that is described in this topic: http://social.answers.microsoft.com/Forums/en-US/vistagaming/thread/f15edea1-f88f-492e-bb42-4db2b06fdf05

  My error message is: "this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program and then contact the software publisher. »

  I tried to run the program in question (Castle of the winds) in each mode of compatibility that is on the list and it is giving me this error message every time. Other people have managed to get the program to work, so I don't know, it does not work on Windows 7, but I can't make it work for me.

  Help?

  Hi autohaptic,

  (a) on the computer what Edition\Version of Windows 7 operating system do you use? What type of system? 32-bit or 64-bit

  If you are running Windows 7 64-bit operating system, you can install the 64-bit computer game program.

  (b) on the computer which the castle of the winds game version are you running?

  I want to clarify, if you try to install the program or trying to run.

  Step 1: Put the computer in a clean boot, and then try to run the game

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  You can consider the right version of the game for your computer relocation program.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• We have configured replication vsphere in our environment and when replication is triggered according to the OFR start us below the questions on the virtual machines that are configured for replication

  Question: We have configured replication vsphere in our environment and when replication is triggered according to the OFR start us below the questions on the virtual machines that are configured for replication.

  Version for esxi: Patch 5.1 level 7

  Virtual center of version 5.1

  Source of storage - IBM v7000

  Destination storage - Hitachi

  
  Questions:
  Events of breach RPO
  Consolidation for the VM disk failure
  Delta abandoned events
  Time change events
  NTFS error and warning (event ID: 137, 57)
  RDP disconnect and ping does matter
  Standby error
  Volsnap error
  Stop the server and offline issue
  Install vmtools emits automatically

  well, in this case, we need to disable the standby of the end of the replication.

  So that everything in triggering replication does not trigger the snapshot of the suspension.

  Then test the if you get these errors.

• need to reconfigure the virtual computer after deployment of the vm

  Hi all

  I have a script to deploy a computer virtual to a CSV file. I need to change the configuration of virtual machine (CPU and memory) after the deployment of the vm. where the name of the virtual machine should be taken to csv. So any help is appreciated.

  Attach the script used. (downloaded and works fine)

  $vms = import-CSV D:\vm-deploy\vm-deploy.csv

  {foreach ($vm to $vms)

  $Template = get-model $vm.template

  $VMHost = get-VMHost $vm.host

  $Datastore = get-data store $vm.datastore

  $OSCustomization = get-OSCustomizationSpec $vm.customization

  New-VM-name $vm.name - OSCustomizationSpec $OSCustomization - VMHost - $VMHost model $Template - $Datastore - Datastore RunAsync

  }

  # This cmd need to run after the vm deployment completed. The virtual computer name must come from the 1 column of the CSV file

  Set-VM $vmname - NumCpu 2 - MemoryGB 5 - confirm: $false

  Write-Host "All VMs deployed" - ForegroundColor Green

  Disconnect-VIServer-confirm: $false

  CSV file looks like this

  Name, host datastore, Template, customizing

  Test-VM,vm-dep-test,ESX02,P5-vm-stage,vm-deploy

  Thanks in advance...

  A simpler, but not optimal, solution is to use the Wait-job cmdlet.

  Something like that

  $vms = import-CSV D:\vm-deploy\vm-deploy.csv

  $tasks = @)

  {foreach ($vm to $vms)

  $Template = get-model $vm.template

  $VMHost = get-VMHost $vm.host

  $Datastore = get-data store $vm.datastore

  $OSCustomization = get-OSCustomizationSpec $vm.customization

  $tasks += new-VM-name $vm.name - OSCustomizationSpec $OSCustomization - model $Template - VMHost $VMHost '

  Data - $Datastore - RunAsync store

  }

  Waiting-task-task $tasks

  {foreach ($vm to $vms)

  $vm.name set-VM - NumCpu 2 - MemoryGB 5 - confirm: $false

  }

• Reload the Configuration of the virtual computer after changing the VMX file

  Hello

  If I make changes to a file on a virtual machine's .vmx in vCenter 5.5 is automatically valid configuration for the engine power vm off? I made some changes earlier and it seemed to be the case, but one of the steps that I see in some of the documents is to reload the configuration of the vm, so it can be used appropriately. So this happens automatically or not?

  Hello

  If she turned off the virtual computer, then during power on, changes to take effect.

  Concerning

  Mohammed

• Move-vm can migrate a powered off the virtual computer to a DRS cluster?

  When I try to move-vm has propelled off VM to a destination of DRS cluster, he says that he cannot migrate a powered off the virtual computer to a DRS cluster.   I can explicitly name the destination of the host and it works, but that defeats the purpose of using the DRS and forces me to script on the destination hosts.

  I do something wrong or I would be able to migrate a powered off the virtual computer to a DRS cluster?

  Thank you

  -MattG

  Hello, MattG-

  I get the same behavior as you when you try to move a VM PoweredOff to a DRS cluster, specifying the cluster as the value for the parameter - Destination to Move-VM (using PowerCLI v5.1 Rel 2 v5.5 Rel 1).  Not quite what I expected.

  To work around the problem, and without having to appoint a particular host as destination, you could use some Get-Random, do something like:

  Move-VM myVM0 -Destination (Get-Cluster myDestDRSCluster | Get-VMHost | ?{$_.State -eq "Connected"} | Get-Random) -RunAsync
  

  Who should receive the machine said cluster and on a host that is in the connected state.  A subsequent operation to the market (whenever do you eventually) should then see DRS power on the virtual machine on a suitable host in the cluster.

  Maybe the dev team can comment if this behavior is the expected or desired.

  Anyway, how does do for you?

• How can I type of NETWORK adapter in the virtual computer a vCloud?

  I'm trying to write a script that compares the type of NETWORK card in vCloud NIC type in vCenter to work around a bug in vCloud 1.5.  I can get the type of NETWORK adapter in the virtual computer a vCenter by getting the vCenter VM up and running:

  
  

  $vcvm | Get-NetworkAdapter | FT-auto
  Name Type NetworkName MacAddress WakeOnLanEnabled
  ----              ----           ----------- ----------        ----------------
  Network adapter 1 isolated EnhancedVmxnet 00:50:56:01:00:33 True

  
  

  I do not get the same results when you perform an action similar to vCloud:
  $vcdvm | Get-CINetworkAdapter
  
  
  Connected primary index IPAddressAllocation IPAddress ExternalIPAddress VM
  ----- ------- ---------  ------------------- ---------       ----------------- --
  0 true true manual 192.168.10.30 nic1
  
  
  I can get all the other info NIC, such as the network, IP, MAC, etc, but not the type:
  ($vcdvm. ExtensionData.section) [2] .networkconnection
  
  
  Network: isolated
  NeedsCustomization: false
  NetworkConnectionIndex: 0
  IP address: 192.168.10.30
  ExternalIpAddress:
  IsConnected: true
  MACAddress: 00:50:56:01:00:33
  IpAddressAllocationMode: MANUAL
  Get_anyattr:
  VCloudExtension:

  For the moment, I get the type of NIC the vCloud himself database vCloud.  Thanks for any help.

  I use VMware vSphere PowerCLI 5.1 Release 1 build 793510

  I could tell you where to find it, but there is a bug in the API that shows only as PCNET32 anyway (sleep if she could be VMXNET3). Keep doing what you're doing with the database query.

  See you soon,.

  Jake

• Best method to deploy the virtual computer

  Anyone who can tell me what is the best way to deploy the virtual computer deploy of the FVO or models (the VM creation) that create the virtual machine of the templated took longer time compare to the creation of the FVO. Any Suggestions?

  Deploying the model customizze the new machine as part of the deployment will treat you while FVO will be an exact xopy, so you need to manually configure the new machine.

• Have on current PC, Win 7 64 bit CS5; How to get *.exe to transfer to the new computer after removal of old

  Have on current PC, Win 7 64 bit CS5; How to get *.exe to transfer to the new computer after removal of old?

  https://helpx.Adobe.com/Creative-Suite/KB/CS5-product-downloads.html

• the text and symbols are too small in photoshop cc, I have a screen high resolution (IPS), what I can do. Now, it is difficult to read

  the text and symbols are too small in photoshop cc, I have a screen high resolution (IPS), what I can do. Now, it is difficult to read

  Install CC 2014 and turn on the preference scale of 200% user interface.