the way back to windows 7

Similar Questions

• Cannot install old set of 16 bits on new 64-Bit Windows 7. Tried to solving problems of compatibility without success. It ran OK on Vista, XP... all the way back to Windows 3.1.

  Cannot install old set of 16 bits on new 64-Bit Windows 7. Tried to solving problems of compatibility without success. It ran OK on Vista, XP... all the way back to Windows 3.1.   Any ideas?  It is my wife's favorite.

  Hello giant,

  It is not possible to use 16-bit on a 64-bit computer applications/games.

  However, you can download and install Wondows XP Mode for windows 7. Later, you can install your 16-bit application in XP mode.

  You can download the application from the link given:
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  After back and let us know if it helped to solve your problem.
   
  Thank you and best regards,
  R uma - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hi, I have a problem that only happens in Firefox (under IE does not): when I Middle click the mouse it opens a new tab, but it also grow my Web site to the top of the page & I need to drag all the way back to where I was. Please I need a solution! Th

  When I Middle click with the mouse, it opens a new tab and also pushing my website to the top of the page and it's really annoying when I need to drag all the way back to where I was

  URL of your Web site? And an example of a hyperlink that does this?

• In response to the way I had Windows 7 works on Qosmio G30

  In response to the way I had Windows 7 works on Qosmio G30

  The thread is locked and I couldn't add this

  After the installation of Windows Vista, I went into C drive and deleted the file old windows which has Windows Xp

  Don't know if it's problems to get Windows 7 to work but that's what I did

  You mean that this thread:
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=179723

  The removal of the old Windows folder should not affect the installed Windows operating system. This file appears if the second operating system was installed on the same partition without formatting the HARD drive.
  Anyway. Thanks for the additional info!

• When I scroll a page all of a sudden the page jumps all the way back to the top

  When I scroll a page all of a sudden the page jumps all the way back to the top

  Hey LouiseReed,

  This could be a problem with your keyboard. For example if your House key was stuck or if you accidentally touch while scrolling the page would jump to the top of the screen. If possible, try to connect to another keyboard and test to see if the same thing happens.

  Another possibility is that your mouse has a top button which is on the Home button. While scrolling if you accidentally hit this button, the page jump to the top.

  If the above information doesn't help you find causing jumps, please provide more specific information such as: what do you use to scroll when this happens, the problem is easily reproducible whether the problem occurs randomly, etc.

  Hope that helps.

• How can I test Windows 8 without losing my way back to Windows 7?

  You may have found yourself on the fence about installing Windows 8, you're not sure if you like it on this system including, or not, but don't want to not lose the files you had before installing Windows 8 or must go through another reinstall process to go back to Windows 7.

  Well, there is another way that is often forgotten.  Windows 7 has the ability to make a hard disk image.  It's basically a clone of the drive because it is when the image is made and it is stored on a set of DVDs or an external hard disk (user's choice).

  Of course, this must be done before installing Windows 8.

  1. first of all, do a repair of Windows 7 as function of this guidedisc.   This

  2. create a system image according to this guide.

  3. If you do not like how Windows 8 running on the system, you can restore the image of the system already manufactured by following this guide.  The image of the system should recover the system to exactly how it was when the image was made.

  It's just a way to test the system changes, such as a different operating system and have a way to go back.

  I hope this information helps.

• How do reset you the program back to Windows 7 compatibility mode?

  I tried to get a program runs on Windows 7, but it would freeze upwards.  Then I changed a setting in the program compatibility, try a Windows XP mode and a mode of Windows Vista (without success).  How to get out the compatibility settings and just go back to Windows 7?  Thank you.

  Hi dartglass01

  
  To change the settings for compatibility manually for a program, right-click the program icon, click Properties, and then click the compatibility tab. You can uncheck the option to run this program in compatibility mode dedicated

  
  You can also check out the link to below to get help-

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

   

  I hope this helps.

• How to transform the way back to the race?

  I have a line of drawing drawing and expanded features in traces. now I should be part of the railways back to shots and can not find an (easy) way to do it.

  inserted is an example of the situation. instead of closed path, I wish that the form was a stroke.

  I would appreciate if someone could help me.

  one.

  

  ankkip,

  You can (always keep a copy of the original work):

  (1) cut the path indicated in the Anchor Points where the rounded end of the original deadline of the race begins and replace Stroke/No fill for all the paths of the limit;

  (2) object > mix > blend Options, location not specified > 1 and guidance > align on the track;

  (3) select the paths of both side of 1 limit) and object > blend > Make (you may need to add one or more anchor Points either if the intermediate stage seems odd);

  (3) object > blend > expand and separate;

  (4) choose the path of the middle and give the law (corresponding to the distance between the path of the border side) and Cap round/Join.

  The new path must now complete and put the side and end paths limited. You may need to make adjustments.

• "Unable to configure windows update, changes the way back" takes too long...

  My PC just newly formatted and now I can see a problem when I turn it off, he just starts to day and after that it fails... I'm worried about what it takes too long... from 10:00 until 16:00? I read an article on them, she'll just take up to 20-30 minutes, but watch?

  Is there something I can do? Can normally on my return from PC? or what I need to reformat?

  Hi Andrei,

  Thanks for posting your query in Microsoft Community.

  I understand your concern, and we as a community will try to help you in the best possible way we can.

  Here are solutions to some common problems with installing updates. You might be able to fix some problems automatically by running the Windows Update Troubleshooter.

  I suggest you check out the link below and check if it helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  https://support.Microsoft.com/en-us/KB/949358

  Hope the information helps, if you have any additional questions, feel free to post. We are here to help you.

  Kind regards

  Guru Kiran

• Values wrong the way back to a Select list in a pop-up window

  Greetings
  
  I have a sample application loaded on apex.oracle.com here: http://apex.oracle.com/pls/apex/f?p=54441:3
  
  Steps to follow:
  1. connect with any ID, there is no authentication
  2 - Select "BATTERSBY DANIELSON & ASSOC" as the Agency
  3 - Select contract ' 1208... "in the drop down menu
  4 - Click on the button "modify an existing contract.
  5 - Click on the button "Create a new constructor" and add what you want to name generator, city and State
  6 - click the 'X' to close the window (cannot do close in itself, but it's another question :-)))
  
  What I'm trying to take place is the values just placed in the fields "New Builder" to appear in the generator element name on the original page.
  
  The name of generator comes from the Select list.
  
  I was able to get the elements of City Builder and generator of State filled but not the name. The name component is actually a concatenation of the Builder and the City Builder name if it is in the Select list or the constructor new pop-up window.
  
  The new Builder does NOT appear in the list select after his return even though I would only it.
  
  The process that is executed when you add a new constructor is an INSERT in the table that generates the select list and VALIDATION.
  
  When a new constructor is added the STATUS column in the table generator is set on "HOLD", so I can identify as a generator again later in the process.
  
  Any help is greatly appreciated!
  
  Internal environment is APEX 3.2.1.00.10
  
  -gary

  I ended up not not using the pop-up as suggests.

  Sometimes the solutions are too easy.

  Thanks for the comments!

  -gary

• How can I cd into a directory that is shared in the console BACK in Windows XP

  I use VMWare Fusion on OS X Leopard. I have a guest Windows XP system. I shared a dir on my Mac and it is mounted on the guest XP as Z:\ drive.

  In a DOS window, I want to CD to a path under Z:\...

  CD C:\ Z:\path to my dir

  But when I'm trying to keep the the DOS prompt to C:\. There is no error message or of any other manifestation of why it does not work.

  Is there a way to do this?

  Thank you

  E

  Try typing just

  z:

  and press.

• CS6 first installation on a MacBook Pro.  Cannot find the serial number.  CS5 owner all the way back to CS3

  I try to install CS6 Design & Web Premium on my MacBook Pro for the first time.  I can't find the serial number.  I own CS products completely back to CS3.  When I try to install CS5 (with serial number), I get an error message saying that it cannot find a previous version.

  Help!

  Lost serial number http://helpx.adobe.com/x-productkb/global/find-serial-number.html

• When I send a message, it shows all the way back, content type and ham report. How can I get this is not for show?

  Return path:

  Envelope-to:

  Delivery date:

  Thu, 19 February 2015 11:00:58-0700

  Received:

  Received:

  From:

  TO:

  Date:

  Thu, 19 February 2015 13:00:56-0500

  Object:

  Order form

  CC:

  MIME-Version:

  1.0

  Content-Type:

  multipart/mixed; Boundary = ""-= _ST6030_0001_5334E1E1_A669C3C2 ""

  Content-Transfer-Encoding:

  7 bit

  Message-ID:

  X-OriginalArrivalTime:

  19 February 2015 18:00:56.0202 (UTC) FILETIME = [02464EA0:01D04C6E]

  X-Spam-Status:

  No, score = 0.2

  X-Spam-Score:

  2

  X-Spam-Bar:

  /

  X Ham-Report:

  Software spam detection, running on the system ".net", has NOT identified this incoming as spam email. The original message has been attached to it, then you can see or label similar emails. If you have any questions, see root\@localhost for more details. Content preview: Please confirm receipt of order attached. Thank you! [...] Content analysis details: (0.2 points, 5.0 required) pts name description of the rule: 0, 6 the area of the RP_MATCHES_RCVD envelope sender corresponds handover relay field 0.8 BAYES_50 BODY: spam Bayes probability is 40 to 60% [Note: 0.4778]

  X-Spam-Flag:

  NO.

  The menu bar, select View-Headers-Normal

  This command removes this information forward and printed copies.

  No menu bar display? Press the ALT key.

• What is the "correct" way to uninstall Windows 7?

  Good evening community... what Microsoft (or anyone out there) consider means of correcting/official to uninstall Windows 7 from my desktop PC?

  In the past, go all the way back to Windows 3.1 - Windows 98 - Windows ME - Windows XP - Windows Vista - and leading up to Windows 7, which is considered the 'official' Windows 7 Uninstall method (in my case Windows 7 Home Premium Retail Full Version)... I uninstalled Windows 7 by a variety of different methods, including 1) formatting the hard drive 2) a simple wiping of hard disk by using one of the many available software disks 3) or format the hard drive using the Windows disk.

  There are probably other ways to uninstall Windows 7 that I mention mostly because I've never used but the 3 methods I mentioned in the previous paragraph.

  Thank you!!!

  Jimmy

  There is no uninstall procedure itself, someone at - it 3 procedures you have listed will do. Personally I use the number of option 3.

  To format drive:

  1. Insert the DVD of Windows 7
  2. restart your computer
  3. When asked if you want to boot from your DVD player, do it.
  4. Select your language, click Next.
  5. click on "repair your computer".
  6. Select the operating system you want to repair.

  7. click on the command line

  8. at the command prompt, type: FORMAT C: /.

  Press enter on your keyboard

  Type y for Yes

  Press enter

  Please wait while the drive is formatted.

  Type exit to close the command prompt, and then click farm to shut down the computer.

• Change the drive letter of the system drive on Windows XP SP2

  Hello.

  There is a certain task I want to accomplish, but I can't figure out how. Here's the situation:

  I have 2 hard drives, each separated into 2 partitions. 1 disk partitions have the letters C: and G: assigned on them.

  The drive 2 partitions receive letters D: and J: . I have two installations of Windows XP, one on disk 1 (C: partition) and the other on disk 2 (D: partition).

  What I want to do is change the letter of the D: partition ( E: letter, even if it doesn't really) . As you probably know, Windows does not allow me to do that because D: is a system partition / boot. So, I was wondering if there is another way to achieve this, without risking damage to the system.
  

  I would be grateful for any help.

  You can correct me if I'm wrong, but I suspect it came because you installed to C on disk 1, and then, without disconnecting the drive 1, installed to D on disc 2.

  If you had unplugged disc 1 before installing the second XP on disc 2, the Windows partition on drive 2 would also named drive C. A clean re-installation of Windows on the drive with the drive disconnected 1 2 is the only way to remedy this I know.

  When you reconnect the disk 1, it will assign other letters for the partitions on disk 2 and vice versa. Having established the two XPs, I would recommend that you delete the drive letters for the other XP system using disk management.

  How do you dual-boot at the moment? By changing the BIOS hard drive boot order? Or by the manipulation of boot.ini file? EasyBCD should help with the latter, you can download the commercial version free from here...

  http://NeoSmart.NET/EasyBCD/

  Tricky

  EDIT: Why are you still on SP2? Follow my instructions here...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-XP-Service-Pack-3/26437969-e063-4605-9df7-f2dbf660993b

  .. .to get to SP3. Recommended to restore Internet Explorer all the way back to IE6 before installing SP3. BTW this site does not work with IE6, print everything before returning.