the Windows 8 (graphic layout) network card is missing, was on WIndows 7

Similar Questions

• Ethernet, the network card drivers missing after I restarted my laptop

  I have a portable 2000, windows 7 64 bit, I have restarted my laptop because it was slow and now the network and ethernet controller drivers are gone, can someone please help!

  OK got that...

  Here are the Ethernet services and network card drivers:

  Realtek LAN driver (LAN):

  Link:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-112547-1&cc=us&dlc=en&lc=en&os=4132&product=5305061&sw_lang=

  RALink 802.11 Wireless LAN adapt:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111691-1&cc=us&DLC=en&LC=en&OS=4132&product=5305061&sw_lang=

• I have a compaq presario cq57 notebook pc and my wireless is not solving the problems of work said that the access point and wireless network card works I need help to fix this please

  the internet works only with the ethernet cable and not wireless. I have service with comcast.

  Hi, Antonia.
  Thanks for posting your question on the Forums of community of Microsoft.
   
  1. do you get an error message?
  2. don't you make changes to the computer before the show?
   
  Here are some ways you can follow to resolve the problem:
   
  Method 1:
  Check out the link and follow the steps in the article:
  Troubleshooting your wireless network and Internet access (Windows 7)
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02543015#n55

   

  Method 2:

  Reference:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Hope this solves the problem

• How to access the Satellite Pro 6100 wireless network card?

  I'm cleaning a Satellite Pro 6100 for a customer and noticed that it has built in wireless card (something they didn't know). However, I just can't work out how to access. I pushed the little switch on the side backwardsa and I rocked forward, Fn + F8 and everything else I can think. But nothing happens.

  I even found the Switch Device Network utility, but that is only to show the LAN card.

  Any ideas?

  First of all please check if Device Manager in the laptop has an integrated WiFi card. The switch WLan available on the website of the laptop does not. Laptops are delivered with different specifications, and the WLan card is optional.

  I think that the WLan card is not installed in your laptop and so you cannot use it.

• Vmnic numbering changed due to the addition of a new network card

  Hi, I was looking for the safest way easier to fix vmnic numbering

  After you install a new network adapter on the server, vmnic numbering went wacky for network cards intel, the broadcoms remained intact 'cool '.

  I'm looking for a few articles online on the modification of the esx.conf under/etc/vmware and change the numbering of the vmnic to whatever it was and then removing those incompatible child row, and then restart the server should fix things up?

  is there a better way or who must take care of it?

  Running ESX 4.1.0 659051

  Hello

  This link seems to describe on ESX 4.

  In addition, this is the procedure to follow when the NIC in the host ESX (i) remove:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1971044

  Peter D.

• 5901tw flow 8: [Please help] unable to connect to 4G network card, driver missing HUAWEI Mobile Broadband Module

  Hi all

  I just bought 8 streams HP 5901tw 4 days ago, yesterday, after internet connection using my card of 4G (WWAN driver) in my Tablet 8 Stream, suddenly the internet connection dropped and I lost my 4 G network card. I don't know why it happens by itself. But for connection Wifi still works well and wifi interface is always detected in network adapter but 4G is missing from the list.

  In Device Manager I see list of pilot missing in other devices-> HUAWEI Broadband Driver Module is missing from my Windows with Bing 32 bit OS 8.1. I try to find the driver through windows update, website of hp or other sources, but is not found. I also tried to update the BIOS firmware to the latest version and upgrade of such software firmware driver LAN, etc. from the HP Web site, but still can not fix missing pilot of the HUAWEI Module of high speed.

  I also try reboot several times, making recovery, but still having lack of driver for HUAWEI ADSL Module.

  Last effort, I try to current level Windows 8.1 to Windows 10, but still no conclusion success lack driver HUAWEI or fixing my 4G network missing question.

  Now I can still connect to the internet with my 4 G card more every trip.

  Someone there solution and how is address/where to download those missing 4 G network driver (HUAWEI ADSL Module) 8.1 for Windows or Windows 10 HP 5901tw 8 streaming?

  Really appreciate for any help and answer including HP support.

  It's really annoying to have this problem and get stuck without a solution. I just enjoy this new Tablet HP for 2 days and now unable to connect to the 4G network more.

  Thank you.

  Kind regards

  Wachyu

  I finally found the problem with the HUAWEI ADSL Module in my stream 8 HP (after 2 days of sleep trying to install and uninstall the driver and try all options).

  It seems maybe some Windows Update or a driver is trying to change the firmware inside the card top debit MOBILE HUAWEI to download mode (VID:12 d 1 PID:1568), so it can't use any driver installed in point 8.1 of Windows.

  I tried to manually change the download mode inside the HUAWEI tools firmware: Revskills (B. Kerler credit) return to the standard mode and then reset, then the Device Manager will detect again under the new material in NIC as HUAWEI Mobile Broadband Module (VID:12 d 1 PID:1570) and automatically installed its driver from Microsoft.

  VOILLAA, My Mobile Broadband can now be re-used to connect to Internet and now also presented in the connection.

  A lot of delicate here to force Windows using HUAWEI driver to use the COM Port to communicate with the card mobile broadband HUAWEI inside and then using Revskills tools to change the mode to return to standard mode.

  If someone knows this problem and wants my help, just ping me and I'll be happy to help you in the orientation.

• Windows could not detect all the wired or wireless [XP] network cards

  Hello
  Recently, I put in a new HARD drive but can't get online at all. Make a diagnosis of the State in Internet Explorer Tools, I got this:

  http://Tinypic.com/r/2qi4sae/5

  and

  http://Tinypic.com/r/11vthma/5

  I am at a loss here, any help much appreciated. Thanks for your time.

  Concerning

  Hello

  I suggest you to return these KB articles and check if it helps:

  http://support.Microsoft.com/kb/315275

  http://support.Microsoft.com/kb/325487

  It will be useful.

• Software exists for the creation of a 'virtual' network card and going to all the traffic on the local network through a proxy server, then by this adapter?

  I can access net through LAN and my college requires a proxy for all access to the internet. If you want to use the internet, it is impossible to do not use a proxy. This is a problem for many programs that do not seem to allow you to enter the proxy settings.

  any software is to create a 'virtual' network adapter that will pass all traffic network (or any protocol x traffic) through the proxy?

  So I have do not need to enter the proxy anywhere... and I have normal internet access.
  What I saw is possible with OpenVPN, but it is a vpn service that I need .i just want to use the feature. In OpenVPN I just enter my proxy server in its framework and OpenVPN to connect to a VPN service and routes all traffic to the FAUCET adapter after which I don't need to set the proxy address anywhere... so my idea is how can I use only the last part that is routing all my LAN traffic to a virtual card.

  Support the LAN---> proxy---> virtual adapter--->, then software I access the net

  That's what I like to do...

  Although I am facing this problem on Windows 7, solutions for all operating systems are welcome.

  P.S: Proxifier is not my solution to not offer something like this.

  Hi Sapan,
  Thanks for posting in the Microsoft community!
  You can use your favorite search engine and look for the software that meets your requirements.

  WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Update the media Drive graphic verses pocket card

  I need help and am stumped.

  Windows 7 64 bit

  I just upgraded my HP Pavilion s3600t of a cracked fan Nvidia 9300GE graphics card 256 MB with a 9500GS graphics card 512 MB. Every thing went stellar including my 3.9 to 5.3 Windows experience index. Not a single problem until I slid the HP Pocket Media Drive in its base. For some reason it isn't recognized not even a green light. When I use the USB cord, it's perfect, Pocket Drive is recognizable and works perfectly. This update of the hardrive graphics card means it won't work anymore the internal section and I cannot use the connection of the USB cable or is there another driver, I need or is it a subtle compatibility on this upgrade problem?

  Thanks to all who can help me.

  Hello

  You could hit a loose cable, install the video card. Open the PC and look at the back of the Pocket reader. The cable is connected?  Check the cable at both ends to ensure that it is connected.  One end of the connection should go to the motherboard.  Make sure it is correctly positioned.

• I have a malfunctioning network card and I was wondering where I can get the files to reinstall the driver.

  the name of the card is the card Microsoft Isatap # 3. My computer is a widows vista, SP 2 and a gateway MD7818U notebook. Thank you

  Hello

  Here's some information about it from microsoft

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark (!) next to it in Device Manager

  http://support.Microsoft.com/kb/932520

  You get your computer section drivers drivers and downloads from gateway

  http://support.gateway.com/us/en/product/default.aspx?tab=1

• I have windows xp and that you can connect to the internet, but my wireless network icon is missing, what should I do?

  Just got a new router, now the icons for wireless internet are gone... What should I do to get back them?

  Hello MMniser,

  Try this:
  1. go in Control Panel - network connections has been classic or network connections and Internet - network connections has been category;
  2. right click on your wireless connection, which is connected and click Properties;
  3. check the option "Show icon in notification area when connected" and Ok.

  Good luck!

• Need to get the version of the driver for my 10GB network cards

  Here's the scenario.  I use neterion 10 GB adapters in my esx host, and they use the S2IO driver.  However, there are different version of this driver that were published as a result of the ESX update.  For example, there is a version of different driver for ESX 3.5 U1, U2, U3, U4...  I can easily get this version # by logging into the console and running the ethtool-i < vmnic # >.  I'm going to get a result like this:

  pilot: s2io

  version: 2.2.14.17590

  firmware version:

  bus-info: 11:04.0

  The number, I'm worried is the 2.2.14.17590.  On a per basis using the ethtool command isn't such a bad way to go.  However,.

  to do this on a couple hundred ESX host is a very time consuming activity.  I would like to be able to somehow get a report that contains the ESX host name with the pilot and the version of the driver at his side.  Does he know how to get this information using powershell commands?

  The only way I know how to automate this is through the use of the command plink.exe.

  Something like that

  $User = 
  $Pswd = 
  $regexMask = [regex]"version:\s+([\w|http://.]+)"
  $Computer = 
  $plink = "\plink.exe"
  $plinkoptions = " -v -batch -pw $Pswd"
  
  $cmd1 = 'ethtool -i vmnic0'
  $remoteCommand = '"' + $cmd1 + '"'
  $command = $plink + " " + $plinkoptions + " " + $User + "@" + $computer + " " + $remoteCommand
  
  $msg = Invoke-Expression -command $command
  $driverVersion = $regexMask.Match($msg).Groups[1].Value
  $driverVersion
  

  I have attached the script from the SW forum has some problems with hooks.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Cannot connect to internet after a reboot before you uninstall and then reinstall the network card. (After the upgrade to Windows 7 from Vista)

  This problem started immediately after the upgrade to Windows 7 Ultimate (32 bit) to Windows Vista Ultimate (32 bit).  Again, I want to remind that I never had this problem before installing Windows 7.

  -After a reboot, I am presented with the impossible to connect the network indicator (yellow triangle with!) in the task bar.  (It was how I was welcomed after the installation of Windows 7 is said by the way).

  -The only way I found to regain connectivity is to uninstall and reinstall the network via the device manager card, date at which the computer always successfully connects and remains connected until the next reboot.

  Network card: Realtek RTL8168C (P) / 811C (P) Family PCI - E Gigabit Ethernet NIC (NDIS 6.20)

  Driver provider: Microsoft
  Driver date: 14/05/2009
  Driver version: 7.2.1127.2008
  Digital signer: Microsoft Windows

  Thus, we have solved the problem! There are two possibilities of your problems:
  1 company Adobe uses the Bonjour service , this service should be disabled.
  Computer > Manage > Services and Applications > Services => find the bonjour service (sometimes stated as long numbers), stop service and if the Disabled value. It works!

  2. If it is not signed as Bonjour service. Try to disable the service:
  Shutdown mDNSResponder .exe (he is represented by # Id_String1.6844F930_1628_4223_B5CC_5BB94B879762 #).

  It is installed with Adobe software. If you upgrade the Vista, it will generally many users problem!

• My Windows 7 computer is no more can detect the wired network, but all my other wireless and wireline devices connect very well. Replace the network card and no change.

  Hello!  This morning my Windows 7 (the motherboard Acer) desktop ceased to recognize the wired connection to its network card.  In other words, it shows kind of connection, but notes "no Internet access.  It connects to a surfboard by Motorola through one Ooma hub, although I encounter the same problem when I connect to the desktop directly to the surfboard.  All other devices Wi-wired and that connect to the surfboard are functioning properly.

  Thinking that the Realtek NIC on the motherboard Asus was the problem, I installed a new Trendnet network interface card in the PCI slot.  I disabled the network card to the motherboard via the BIOS settings.  No change.  Always 'no Internet access.

  Time Warner Cable test the modem from their office and said it was working properly.  I also connected a laptop directly to the surf board using the same cable, and he was able to connect to the internet.

  Can someone help me understand what the problem is?  Thank you!

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

• Satellite Pro L630-12: the Ethernet controller v v. WLAN network card

  Basic questions:
  My Satellite Pro L630-12F has (A) an Atheros AR8151 PCI - E Gigabit Ethernet Controller, and (B) Broadcom 802.11n Network Adapter.
  Toshiba continues regularly informing me that a Wireless Lan Driver update was released, which I need to install.

  First question: is Wireless LAN Ethernet controller driver or the network card?

  I have check the versions on my machine of both (A) and (B) with the PC diagnostic tool and find that (B) is the latest version (5.60.48.35) and (A) is a very old version (1.0.0.26). I download the latest version (9.2.0.316.0) of "Atheros Wireless LAN Adapter" for my machine from the Wireless LAN Driver download page (Windows 7 (64)) and run the file. But, everywhere I look, my machine continues to say that the version of (A) is (1.0.0.26).

  Second question: am I update the Ethernet Atheros controller when I download and run the Atheros Wireless LAN Adapter?
  If Yes, then why doesn't it show the latest version information?

  Sorry for the basic questions, but I found no explanations in various forums on the difference between 'ethernet controller', 'network card' and 'Wireless LAN' after searching several times. I'm afraid that Toshiba keeps informing me that I don't have the latest version of the wireless LAN driver despite my efforts to follow their instructions.

  > First question: is Wireless LAN Ethernet controller driver or the network card?

  Ethernet controller can be both; WLan and LAN in your case I guess that WLan is Ethernet controller, it would seem if the WLan driver is not installed

  Your laptop L630-12F seems to bear card Broadcom BCM94313 WLan and the driver can be found here:
  http://APS2.toshiba-tro.de/WLAN/

  > Am updated the Ethernet Atheros controller when I download and run the Atheros Wireless LAN Adapter?

  This is driver LAN!