Weird display on my Satellite P200 - 1 g 8 problem

I bought my new laptop Satellite P200 - 1 g 8. I had some problems with the display cable.
After that switch on and work for a few hours, the display is corrupted, or you can say distort.
It is very difficult to explain in words. But when I restart or switch users, it starts, works very well and then again after 1-2 hours the screen suddenly corrupts.

I've updated the drivers and Vista too, but I still have this problem. This problem comes then it distorts everything on the screen gave nothing.
It is not overheating issue.

If someone knows about it or anyone can help with this, thanks in advance.

Thank you
Cecile

Hello

To be honest, it is not easy to understand exactly what is happening. All you can do is install Vista with delivered recovery DVDs. This image has been tested and it should work well. If the problem persists, it must be checked by the service.

Sorry, but I don't see another solution for you. As I have written before that it is not easy to understand exactly what is happening and what it looks like.

This occurs if you use a specific application?

Tags: Toshiba

Similar Questions

  • WXP need display driver for Satellite P200 (PSPB6)

    Hello

    I can't find the display driver for Satellite P200 (PSPB6)!
    I have installed Windows XP Home edition, downloaded all the drivers, but why is there no display driver for Windows XP Home edition?

    Can someone help me with the problem? I googled for hours.

    Obnoxious

    ATI driver display for your Satellite P200 (PSPB6) you can find HERE

  • Installation of Satellite P200-144 recovery disk problem

    Model Satellite P200-144 PSPBGE

    Hi all

    Today I received a 2nd recovery disk mail via UPS directly at Arvato distribution GmbH

    Yet once there not in the exact same place as the 1st disk that I received but returned and they replaced.

    My original recovery disk was lost around the House 3 months back, which I am now myself kicking on.
    Reason for restoring factory default settings was that I wanted my pc to be clean like a cell phone factory default as it was full of registry errors.

    In any case on the problem, after that 67% of image recovery happens with the corrupted file, here is the installation proc.

    Try to rename all the letters of potential left to HDD0
    Try to rename all the letters of potential left on HDD1

    Microsoft DiskPart version 6.0.6000

    Copyright (C) 1997-2007 Microsoft Corporation.

    On computer: MINWINPC

    Disk 0 is now the selected disk

    DiskPart succeeded in erasing the disc

    DiskPart succeeded in creating the specified partition

    Partition 1 is now the selected partition

    DiskPart successfully assigned the letter of the drive on the mountpoint.

    100 percent complete

    DiskPart successfully formatted ther volume

    DiskPart succeeded in creating the specified partition

    Partition 2 is now the selected partition

    DiskPart successfully assigned the drive letter or mount point

    100 percent complete

    DiskPart successfully formatted ther volume

    DiskPart marked the current partition as active.

    Define RECO-info-guid = 4D2AE583-8FD5-4D7D-AE07-B098C1CBA1B5
    RECO-info-imagecount value = 2
    define the RECO-info-partnumber = 1
    RECO-info-numsplit value = 5
    RECO-info-bootindex value = 0

    L ' ImageX for Windows tool

    Copyright (C) Microsoft Corp. 1981-2005 all rights reserved.

    Progress: 67% 06:44 minutes

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    ResourceExtractToFileByStruct: (seq. 50)-> Uncompress or WimCopyFileEx failed

    [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    Error image restoration.

    The file or directory is corrupted and unreadable.

    Error: ImageX could not apply E:\05021XSP.swm Index 2 Weird Vista in C:!

    Is there a reverse this problem?
    My thoughs is that the image is corrupt.

    The error that you declare, is a fault with the Vista disk image cannot be applied to the hard drive.

    Which you used 2 recovery discs of different product, which would indicate that there is not support for product recovery but a defective hard drive, possibly bad sectors on the hard disk.

    If the laptop is in it duration of warranty, then give Toshiba a call for the book on deposit for a repair of the equipment.

    0844 847 8944

  • Satellite P200 - unexplained MIDI file problem message

    Satellite P200 - without any sound media playing I regularly get the pdf file following poster "If you have problems with playback MIDI files please perform following steps.»

    I have no problem with the sound, DVD, MP3 etc.
    No explanation and how can I stop it?

    I always put t understand when this message appears.
    Can you please be more detailed description of the problem?

  • NVIDIA WXP need display driver for Satellite P200

    Hello

    I have a problem with the installation of the Setellite P200 display drivers - 10 c.
    I install the Windows XP operating system and can not find the drivers for NVIDIA GeForce Go 7600.
    On this site, there is only windows vista driver. On nVidia official site I have'n found all the drivers for this device.
    Can you help me?

    I had the same problem. Display drivers do not work. I downloaded the driver from the website guru3d.com
    They work!

    I would like to know how it goes!

  • Satellite P200-1EE - webcam activation problem

    Hi This is my 1st post... so hi to all.

    Well I unboxed the laptop and installed all the stuff... but I'm not able to get the webcam to start? I have no idea... so any help please.

    I looked in Device Manager and it was not listed, and I can't find any application in program files... is this normal?
    I want to be able to use it

    Thank you very much

    Hello, welcome to the forum. You are looking for the camera Assistant Software.

    We find it > C:\Program Camera Assistant Software for Toshiba\CEC_MAIN.exe

    If this isn't the search directory and then just to CEC_MAIN.

    Hope this helps, bye.

  • Display on the Satellite C855D-162 new driver problem

    I got my computer laptop C855D-162 Wednesday and I'm still not running. I had Windows 8, installed all I could from Windows update. When I turn on the pc I get the Message in Norwegian so I m trying my best result.

    + AMD VISION Engine Control is not supportet by the driver Version of the map of the active screen. The AMD graphics driver update or enable AMD card controller screen. +

    Sorry I'm not 100% sure that I translated it directly, but I hope that you can understand what I write.
    What I tried was to go too Control Panel and system for updating the graphics card, but when I did.

    I got an error 43 and a message that it has not worked.
    I also did a check on the Office Help menu and on the test it came out for the map screen that something was wrong. Abit worried ofc I'm not getting this sort since im trying to get written papers due this weekend .and that I had some bad luck purchasing this pc
    I just hope that it is something that I forgot to do so because this is a new pc.

    On a test I did (I got AMD Radeon HD M 7610)

    Driverbehandling har overforingen installasjonen av driveren atiilhag.inf_amd64_ae6e6f4a21b45b05\atiilhag.inf for enhetsinstans-ID PCI\VEN_1002 & DEV_6742 & SUBSYS_FB3B1179 & REV_00\4 & 38 has 0A1E8 & 0 & 0010 med State following: 0x0.

    I don't know if this can help: P

    Therefore, I am here on my new computer and I have no idea what to do

    Hilde

    Please post the exact model name and the model number of your laptop.

  • Satellite P200 - extra hard drive problem

    When I bought my laptop the advisor at importers told me I could get an adapter so that I could put the second drive in my laptop but now when I want to get the adapter and another player, they want to charge me about a 3rd of the price of what I paid for the laptop! And I pay dealer prices goods... All seems like hold up for me! Especially seeing that we all know the price of hard drives is so low!

    Can anyone help with a part number, or the details of this adapter so that I can order from abroad or find on ebay or something?

    Hello

    I put t know which adapter you are which means exactly, but if you want to use a second HD in this notebook, then you should check first if the second HARD drive bay contains the necessary HARD drive connector.

    You should know that not all laptops can be improved with the second HARD disk, even if the second HARD drive Bay is available!

    Then remove the second Bay and check if there is a HARD drive connector!

  • Satellite P200-where is the switch that makes display to turn off?

    Hello world

    I have a Toshiba Satellite P200, there is a problem with the display, it works and it doesn't work.

    I did some checking, the backlight is turned on, and it works well with a second monitor.

    The question I really want to ask, where is the switch or contact on the lid or the body of the laptop that stops at the screen when I close the lid?

    I have the laptop stripped down and I see there, not anywhere, where there is some sort of mechanical or magnetic contact between the cover and Palm rest.

    I thought he got me something where the lid locks close but can't see anything there.

    I know that there must be something that puts the laptop into hibernation when I close the lid, but the sensor or another location.

    see you soon

    Spike

    I think that the sensor is part of the motherboard, but can't tell exactly where he might be.
    But as far as I know that the JP9 (40pin) is used to connect the screen.

    However, in my opinion this is not a sensor delivers
    If something is wrong with the screen, you may need to replace either, FL inverter, LCD screen or check the connection between the screen and motherboard

  • Satellite P200 - need CPU fan replacement

    I have a Satellite P200-16V and my problem is on the cpu fan.

    I tried to open it, but after the keyboard, hard drive, Rams, OVOCHECK and 40-50 screws and some cables, I realized I have to get out the motherboard and screen mabe and I close it again after 3-4 hours. The cpu fan has been breaking and I don't know what to do.

    I am from Greece. If I go to the toshiba in Greece, I can find a cpu fan or any system cpu radiator? Can you help me?

    Hey Buddy,

    Looks like the fan needs to be replaced and therefore, you should contact the closest service provider authorized in your country. Guys can order a replacement part and swap it out.

    On the Toshiba site, you can find a list of them:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

    Sorry, but everything that s what I can say. Here it s only a user forum so I think no one knows the exact number of part or a manual how to take apart the laptop but the ASP can do for you. :)

  • Satellite P200 - disabling Internet special button Close button walk / stop

    I have a Satellite P200. Recently, the problem that my Internet push button itself so multiple Firefox Windows begin to appear at random intervals. Sometimes 2, sometimes it's 30. Needless to say, it's pretty boring.

    I found where I can customize the buttons and make the Internet button open a different program, but it doesn't seem to be an option to turn it off completely. If I "Unregister" the Internet button, then it goes back to the default function of opening a Web browser when it is pushed.

    Is it possible to completely disable these keys?

    Thank you!
    Jason

    Hello

    I have the same model of laptop and disabling option is not known to me. What you can try is to remove the utility of technical support of added value package button.

    In Control Panel, you will find option programs and features. Click to remove the VAP. Generally, it should ask you to change the installation and you can choose which part of this package can be deleted, if it is not completely remove the VAP.

    Download the last option in the download page of Toshiba, but when the facility starts choose custom installation and uncheck the box in front of the technical support of button utility.

    So for now I see it as the only possible solution.

  • Satellite P200 - some web pages are not displayed properly

    Hello

    I have a laptop Toshiba Satellite P200 with Vista home premium
    I use a wireless connection

    A few weeks ago that some pages on the web incorrectly displayed as e bay, face book, Amazon I did a virus check etc. no joy.
    I did a diagnostic test and results said "failed test network!

    I looked in Device Manager and under network there is a driver called ADAPTER ISATAP on right click that says that it is working properly.

    It seems that this could be the problem. Could I delete this driver and download it again?
    Could someone offer advice on this subject any comments would be more useful

    Thank you
    Jez

    Hello

    Devil, please this Microsoft document http://support.microsoft.com/kb/932520
    What do you think of first sentence: you can ignore this error message?
    Very funny! ;) What do you think?

    What happens if you remove it from Device Manager and reboot your laptop?

  • Need to go XP Display Driver Nvidia GeForce 7600 for Satellite P200-143

    Hello

    I started my P200 - 143 Toshiba Satellite Vista double. But I can't find the NVIDIA drivers on the site Web of Toshiba. I tried many downloads of the nvidia Web site, but no one has been installed properly resulting in the flicker of screen on XP.

    Kindly let me know the location of the driver to download the existing drivers from nvidia works perfectly or there is no particular sequence in which the drivers will be installed.

    Any quick response is highly requested, please.

    Kashi

    Sorry, buddy, but I don't quite understand you.
    You have P Satellite P200-143 with model number PSPBGE-xxxxxxEN.

    So what you need to do is to visit the download page for Toshiba under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    So what you need to do is to choose the right laptop model:

    Type of portable computer product
    Familly Satellite
    P series Satellite products
    Model 0 Satellite P200 (PSPBG)
    Model short No. PSPBGE
    Windows XP operating system
    Type display driver driver

    SEARCH

    Nvidia 8.4.0.0 display driver version will be listed as a result.
    I think that Toshiba has tested this driver and it should work properly. Of course, if you install the correct version of Windows XP Home (SP2 of Windows XP Home edition) and other things following the Instructions of facilities document.

    Good luck!

  • Bad display on Satellite P200

    Hello

    My P200 under Vista has a terrible display, all the fonts are blurry and in general, the view is terrible.
    I tried to change the display settings of but nothing seems to make any difference.
    All of the suggestions.

    Thanks in advance, IanB

    I use the Satellite P200 almost a year now and all I can say is: use recovery media, install the original recovery image and be happy. I don't know how long you use your P200 and as you have driver display, but for your problem, I have three explanations:
    -You use some bad graphics driver
    -L' display is faulty or
    -You need glasses

    Please don't be crazy for my last comment. It has nothing with your person directly. I just wrote about my own experience. Satellite P200 has the glossy LCD screen brilliant (TruBrite) and using the standard display (1440 x 900) resolution image on the screen is quite clear.

  • Ubuntu on Satellite P200 - bad 1C2 Display Mode!

    Hello!

    Laptop: Satellite P200 - 1C2

    I installed Ubuntu 7.10 on my computer and I want to use the view Mode '1440 x 900', but Linux guys said I should change

    HorizSync 30-70
    VertRefresh 50-160

    int the xorg.conf file, but I have not found the right length and width of the screen in the manual of toshiba. Can someone tell me what length and width I have to write in the xorg.conf file?

    You won´t find this information in the manual of toshiba, because they are "generally" not relevant for customers. Already tried these settings? I want to say if you didn t tried em, you won´t know if they really work and linux guys were right.

    Please, check if these settings, which must be entered in xorg.conf, work. If not, come back here and give some input bit.

    Also, visit this link on xorg.conf:

    http://Gentoo-Wiki.com/HOWTO_Widescreen_Resolutions _ (WSXGA)

Maybe you are looking for

  • MacBook Pro mid 2012 memory

    Hallo, I have macbook pro 13 inch mid 2012 [core i5 ram 4 GB], but the manufacturing date is 2015, I took with app battrey of coconut. I can improve my memory by default 4 GB and I took a specification of the [expandable to 8 GB] apple site I see oth

  • How can I open a link in read Mode?

    I know that many sites have an option - I don't know what it is officially called - to erase a part of the animation, zoom, sheer, columns, etc. I have headache and sensory processing problems, these things can be very painful for me. I sometimes ope

  • Try to find and copy bookmarks from an obsolete computer (mounted as a disk drive)

    My old computer died. However, the player still works and I tied it on the new computer as an external drive. Unfortunately, I can't find where Firefox stores the list of bookmarks (unfortunately it is not in the 'Favorites' folder). I want to draw t

  • a constant reminder to use HP connect to determine the use of ink

    install the printer about three weeks ago, everything went well. Still using ink comes with printer and received the first order of ink by mail. For the past two weeks whenever I want to print, I get a message to connect to hPconnenct for congruent i

  • Re: Installation of Win XP on Satellite L300

    I want to install Win XP on my laptop, but when I come to the part of the set up to select the disk to install at all I have is a FAT 700 MB drive. What do need me to let him see all 104 GB SATA HDD and how do I use the program? Thank you Lazygizmo