The Windows BIOS setting tool - function?

Similar Questions

• I ran the Windows memory diagnostic tool, he keeps repeating and will not be finished, finally Boot Manager Windows appears with the error code: 0xc000000d.

  I ran the windows memory diagnostic tool on my PC toshiba laptop equium, it restarts priming for display and then directly into the RAM test...
  Unfortunately, it will not end and keeps repeating and finally if leave to work for a few hours the Windows Boot Manager comes in and stops the RAM test while noting an error 0xc000000d code. I REALLY can't reformat what I have given crucial for the thesis of the University and I only have the Vista installation disc not repair...
  This RAM test shows whenever I start the PC, how can I forget that he spent his RAM test a pc and more? I'm so confused!

  Any ideas on how may get a repair disk or fix it otherwise? Thank you very much

  Run Memtest86 +: your computer passes this test?

  Memtest86 + is running from a floppy or CD and should eliminate or confirm if your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.

  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.

  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  J W Stuart: http://www.pagestart.com

• Cannot install the support for Windows 7n pack because "this version fo the windows genuine validation tool is no longer supported.

  I can't install the support for my version of Windows 7n pack because "this version fo the windows genuine validation tool is no longer supported.  Please download the latest version and make sure that your system clock is accurate. "I am downloading directly from your site, so unless a new version came out... Help IDK

  Make sure that you run from Internet Explorer.

  http://go.Microsoft.com/fwlink/?LinkId=52012

• Error message cannot use the help files, "this version of the Windows Genuine Advantage tool is no supperted any longer. Please download the latest version.

  Original title: using files to help in windows 7

  I use a copy saved Windows 7, 64-bit, SP1, professional and I can't use my old XP computer help files copyed.  I followed the instructions Microsoft Help and Support and downloaded "WinHlp32.exe". During the process of validation of Windows, I get the message "this version of the Windows Genuine Advantage tool is no supperted any longer. Please download the latest version... ». HOW CAN I DO THIS?

  JIm
  Start the Windows genuine validation

  Jim

  Be sure to use Internet Explorer to validate the OS. If you use a third-party browser Internet Validation may fail.

• All the Windows media player play function has stopped working

  Original title: windows media player

  My system is Vista service pack 2. Recently, I've noticed that when my music on media player. Play all function has stopped working as before. It will not go forward or backward unless I type in the artist on my search bar. Is there a setting that went wrong and a simple solution, please. I don't know noty when it started to do that I have such a big library I use mostly the search bar. But I would like to play them all when I scroll to the bottom of my list of the library. Yours if fine!

  Hello

  ·         Are you trying to use play all the features in Windows media player or Windows Explorer?

  ·         The option is available on the details pane or the playlist?

  I suggest you follow the steps mentioned below:

  Method 1:

  Race he difficulty of the link and check if the problem persists:

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  Method 2:

  If you use Windows play explore all the functionality, you can run the System File Checker tool to troubleshoot missing or corrupted system files and check if the problem persists:

  http://support.Microsoft.com/kb/929833

  Method 3:

  If the previous step fails, follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

• How can I replace the windows with ScanGear tool analysis tool much better? MX882 on Windows 10 Pro. ?

  I have a PC on which I instaled the Canon drivers live cannon and I love the ScanGear interface. It surved upgrade Windows 7 to 10 Professional. On the other hand, for my other PC in the home group, I let windows install the drivers for the MX882. Scanning windows interface is limited! How can I get the ScanGear interface to replace the windows tool?

  Thank you!

  B

  ScanGear is just the scanner driver. Are you talking about software, Canon MP Navigator EX scanning? Which is available for download from the Web site.

• Cannot find the Windows 7 Snipping Tool more

  I used the tool cutting since the installation of Windows 7 last year.

  Suddenly, I can find no trace of the tool cutting on my PC.
  Where can we go?
  How can I get it back?

  Find someone with a Windows 7 computer and copy the Snipping tool.exe from their computer. Copy it to the Windows\System32 folder.

  Let us know if that helps.

  Marilyn

• Since the default bios setting: no sound.

  Hello! I have tried every thing like drivers, device, (all the troubleshooting steps) cable connections Manager (I hear a short speakers hum when I turn them on) I also back the driver

  Yet there is a small x on the sound on the tool bar icon saying: no speakers or headphones are connected. And nothing helped.

  can I upgrade the bios?

  (I also tried to change integrated audio settings enable/disable in the bios)

  I have more ideas in advance thanks!

  HI François,

  Thanks for posting your query on the Microsoft Community.

  It is not recommended to make changes in BIOS as this could cause serious damage to the system. You can uninstall the drivers, go to the manufacturer's Web site and download the latest Windows 7 compatible drivers. See if it helps with your problem.

  Try the steps mentioned in the article below and see if it solves your problem.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab2&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. Please respond if you have related research.

  Kind regards

  Jesinta Rozario

• Satellite Pro A100: Trojan warning message during the windows BIOS update

  Trying to update my Bios through windows, my anti virus (f-secure) has a crush on decompressing the zip file a warning.

  The warning pointed out that the folder contained a Trojan horse and that he had been cleared to protect my computer.
  A warning from microsoft also said that access to these files had been blocked to protect your system.

  Is it possible that this update, downloaded from Toshiba really contain malware or could there be another reason for this event?

  Advice for help would be appreciated

  Post edited by: james7dean I have a satellite pro a100 o/s windows xp pro

  Hi james

  Don't you panic! You BIOS are not affected by Trojans, Malware or viruses.
  For the most part these BIOS files are not known for anti-virus applications and, consequently, anti virus software reports and notifies a virus.

  Before you start the update of the BIOS, you must disable automatic virus protection!

• A hand tool Bug in Adobe CC on the Windows 8.1 tool /Blocked

  Hello

  When I had installed windows 8.1 a hand tool space in apps CC from Adobe has been blocked. I have tried everything what i saw on the Adobe forums but nothing has been helped me unlock tool. I just can I change tool through 'h' shortcout, but it's pretty boring. I am looking for a professional opinion from Adobe.

  Concerning

  OK problem solved - try Metro UI-> settings-> PC and devices-> Trackpad-> Touchpad - deaktivate the delay of Touchpad (only have the German settings)

• When Windows 8 color of the window is set to black, tab inactive headers are invisible

  Hello

  My Firefox browser was simply updated, and now I can't see header inactive tab text. This is because I use the black color for windows in my Windows 8 operating system (see the screenshot https://onedrive.live.com/redir?resid=7B6F4C0CAADD954A! 2079 & authkey =!) AAvWsOMvcoRNyew & v = 3 & ithint=photo%2c.png ).

  Can you offer me ways to solve this problem?

  Thank you
  Vassili

  Hello, Vassili.
  This was one of the issues mentioned in the war for the launch of Australis room and I wanted to let you know that they are looking into a fix for this.

  • Bug 1004576 - tabs [Australis] Background are unreadable when using a dark Windows theme

  Thank you for your patience.

• Want 4-1130US access Intel RAID Manager from the BIOS or screen of the Advanced BIOS setting?

  I just got the ultrabook of 4-1130us envy.  I need to access the screen of the Manager RAID Intel and advanced the BIOS configuration screen.

  By pressing "Esc" at startup until gives me only ordinary BIOS screen, and many options are all grey that I can't change.  How to access these screens?

  Thank you

  Thank you

• Text of the window 7 set text not recognized! Internet problems too!

  Window 7 text the unrecognized value and unable to read, also my computer is so no more authentic windows 7. my internet connects also not when he says I am.

  Plz help me uninstall malwarebytes!

  Hello

  First, reboot the system and start typing the F8 key

  Select Mode safe mode with networking

  Download follows him and run a full scan to rule out malware is still on the system

  http://www.Microsoft.com/security/scanner/en-GB/default.aspx

  Then, try to reset the default text

  1. Right click on the desktop. Choose "Customize".
  2. Click on window color and appearance.
  3. Click on advanced appearance settings
  4. Go through each element and restore (as applicable), bold, no italic fonts. (All parameters of a machine Win7 or Vista by default will be Segoe UI 9pt).

  Or, you could try a restore of the system for the date and time when everything was fine with the computer.

  Activate Windows by phone:

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  (5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your question clearly to the support person.

• When using windows scan & fax tool I get: _ 'network processing timed out. Check the scanner settings & network"error

  I am running Vista ultimate on 64-bit computer with a Linksys WRT310n router in LAN mode. I also have a Canon MF4370dn printer that prints screen & documents ok. I can see the printer on the network.

  I'm mainly interested in the function of scan here.
  With the mf scanner set to scan mode of network (according to Canon), I opened the Windows scan & fax tool, I select the WIA Canon scangear printer/scanner/fax to network & I get a panel where you select dpi/jpeg/bmp etc. When I select the function preview or scan I get an error message that says "network timed out treatment. Check the settings of the scanner & network.

  I read a lot of sour comments on the analysis of the network of this machine. It's a shame, because it is a machine of great, fast & compact mono laser. I have disabled the firewall of the router, still no go. I also tried the rout USB with software to reinstall with network for others, printing & for my machine but italways deferred to the network on mine with the same error message.

  I also read where it analyzes only at 300 dpi... so with all these pros & cons I decided to get a good, dedicated, scan that will probably better results of the scanner anyway.

  Thank you for all the good sites & info you have provided.

  Newbie.

• Windows Phone, recovery tool is not installed in windows 7, says the hash value is missing

  Windows Phone, recovery tool is not installed in windows 7, says the hash value is missing. Whenever I try to install the windows phone recovery tool it does not install error

  0 x 80070003, system can't find the path or 0x800b0101, hash value is missing... Please help

  Hi Imran,

  Thanks for posting the query on Microsoft Community.

  I'm sorry to know that you can not install Windows Phone on Windows 7 recovery tool. The problem could be due to system files or software problem.

  Try to solve the problem by following the methods below.

  Method 1

  Try to run the patch from the link below and check if it helps.

  Error code 0 x 80070003 when a preference of group policy is applied on Windows 7 clients:

  http://support.Microsoft.com/kb/2904034

  If the problem persists, then go to method 2.

  Method 2

  Refer to suggestions provided by Vijay B responded on December 22, 2009.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/the-system-cannot-find-the-path-specified-error/dae5f759-B053-4a4a-87af-42e79f517631

  I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.