Update for Windows 8 (KB2822241) fails to install and has the error Code 800703F1

Similar Questions

• KB2656374 update failed to install and get the error code 80070020

  Try to install update KB2656374 and get the error code 80070020. How can I fix this please?

  Hello

  1. who is the antivirus installed on the computer program?

  2 have you made any changes to the computer before the show?

   
   

  Perform the steps described in the article:

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

   
  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
   

  I hope this helps.

• running Windows 7 have seven important updates for microsoft office 2003 won't install because of the error code 646

  running Windows 7 to have seven important updates for microsoft office 2003 that none will install due to error 646 code can't find a simple forum solution... can anyone help?

  A KB was created for 646 error code that appears during the installation of the updates of Microsoft Office. The KB includes an automatic Microsoft Fix it 50461 that corrects the problem. Look at the following KB: http://support.microsoft.com/kb/2258121>

  Please let us know if that helps.

• Error Code 8E5E0147. Platform update for Windows Vista (KB971644) update for Windows Vista (KB973917) update for Windows Vista (KB976470) fail to install.

  This problem lasts for a long time and I'd like to update my Windows Vista.  Thank you for your time.

  Hello, I sent an email before for support, but I have no answer at all so I tell myself I'll try to ask my question here.
  I get the following error code (Code 8E5E0147) whenever I try to install the following updates for Window Vista.
  Update for Windows Vista (KB971644) platform
  Update for Windows Vista (KB973917)
  Update for Windows Vista (KB976470)

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  See this previous discussion about this error: http://social.technet.microsoft.com/Forums/en/itprovistasetup/thread/5d5084ec-78f6-427c-a146-91fcf72e3616

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Update of security of Silverlight won ' t install. Get the error code 0 x 656 when attempting to do.

  This is updated from Windows.  I was told the need update on a problem of security with Silverlight, then went for it and the installation to fail.  Said that the error code is 0 x 656.

  The search for a solution, I'm done on the page of Fixit which is supposed to automatically fix the problem.  Now the installation initializes, but that's all.  Still will not completely install.

  The reference for the problem that FixIt is supposed to fix is:

  Article ID: 943144 - last review: August 25, 2011 - revision: 13.0

  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or

  I'm not if yes or no I installed SP3 without having to restart after installing SP2, this is what is meant by 'immediately' in the title of the article above.

  Will you restart and try again.

  Help!

  Hello

  Silverlight security are what update you referring? You can check the number of KB in the history of the update.

  Measures to ensure update history:

  1. click on Start, click all programsand then click Windows Update or Microsoft Update.

  2. on the Windows Update Web site or the Microsoft Update Web site, click view update history.

  Reset Windows Update components and check if that helps.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• Vista home prem (KB967723) sp2 security update does not install and get the error code 80073712

  I tried to fire disableing walls, with work, I get all the way to installation and the i get the error code 80073712

  http://support.Microsoft.com/kb/957310

  «Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712" "»

  Method 1: Run (Checksur.exe) system update readiness tool

  1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

     For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:

     947821 (http://support.microsoft.com/kb/947821/) Description of the update readiness tool for Windows Vista system
  2. Try to install updates again.

  Note After running the tool, the Checksur.log file is stored in the following location:

  %SystemRoot%\Logs\CBS

  In a default installation of Windows Vista, is the Windows directory.

  If this method does not resolve the problem, go to method 2.

  Back to top

  Method 2: Install Windows Vista Service Pack 1 if you have not yet installed Windows Vista Service Pack 1 (SP1), visit the Microsoft Download Center and then download and install Service Pack 1. To do this, follow these steps:

  1. Quit all programs, and then click on the following link:
     http://www.Microsoft.com/downloads/details.aspx?FamilyId=f559842a-9c9b-4579-b64a-09146a0ba746&displaylang=en (http://www.microsoft.com/downloads/details.aspx?FamilyID=f559842a-9c9b-4579-b64a-09146a0ba746&DisplayLang=en)

     Note Click the option to download on the download page, click Save, and then save the download to your desktop. When the download process is complete, click run to install the SP1.

  2. Restart the computer.
  3. Try to download the updates again.

  If you can't always install updates, go to method 3.

  Back to top

  Method 3: Perform a repair of Windows Vista installation when you perform a repair installation, which restores the current installation of Windows Vista to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows Vista.

  To perform a repair of Windows Vista installation, follow these steps:

  1. Restart the computer.
  2. Insert the Windows Vista DVD into the DVD drive of the computer.

     Note If Windows does not automatically detect the DVD, click on Start, type: \setup.exe in the Search box, and then click configuration in the list programs. Then, click install now.

  3. Click connect to get the latest updates for installation (recommended).
  4. Insert the product key if you are prompted to do so.
  5. Click to accept the Microsoft software license agreement.
  6. On the screen which type of installation you want , click upgrade.
  7. Once the installation is complete, restart the computer, and then try again to install updates.

  See you soon.

  Mick Murphy - Microsoft partner

• I can't install the update for Windows Vista Service Pack 1 (KB936330). I get error code 800F081F & dt000.

  I tried to solve this problem, almost every day since the 01/08/2012 a period of 3 to 7 hrs @ a time, following troubleshooting instructions everything including the fix It Center without success. I even tried to do it manually.  I need a disk to achieve? Please give me detailed instructions thoroughly. Is this a common problem with Windows Vista.

  What are error codes: 800F081F & dt000

  Hello

  1. have you made changes on the computer recently?

  2 is the issue specific to this update?

  3. are you able to install other updates successfully?

  4. What is the brand and model of the computer?

  5 all the troubleshooting steps you have done?

  Try these steps and let me know the status.

  Method 1.

  I suggest you follow the steps in this article.

  Problems with the installation of the updates: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-installing-updates

  Method 2.

  Clean boot : Try to set up your computer in a clean boot state and check if you are able to install the update. Tuning your system to start in mode minimum state helps to identify third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Disable Firewall: turn enable or disable Windows Firewall: http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Note:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you need to disable temporarily to install other software, you must activate it as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3.

  Learn how to install Windows Vista Service Pack 1 (SP1): http://windows.microsoft.com/en-us/windows-vista/Learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate. The virus scanner is provided so that the computer is virus-free before you start to install the updates.

  Method 4.

  The system update tool scans inconsistencies in the computer where it is installed. It usually takes less than 15 minutes to run the scan. However, the tool might take much longer on some computers. Although the progress bar seems to stop, the analysis is still running and you should not cancel the update.

  The system tool that corrects problems with Windows Update is available for Windows 7, Windows Vista: http://support.microsoft.com/kb/947821

  For reference:

  Windows Update 800F081F: http://social.technet.microsoft.com/Forums/en-US/itprovistasetup/thread/2cf14002-250f-4cd3-baab-185b13d1e501/

  I hope this helps.

• KB2656353 & KB265637 try several time to install and get the error code 643

  Original title: several attempts but will not install updates

  KB2656353 & KB2656370 security updates will not be installed. I have made several attempts to install & they will not. I ran the Windows Fix It to fix any problem & he says that it correct. But again, try to install & it does NOT install these two.  It also has a Code 643 showing thereon.

  Try to download and install them manually.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=29364

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28575

  To solve the problem check this article

  http://support.Microsoft.com/kb/976982/en-us

  or

  Try to repair the .NET Framework.

  Click on Start > control Panle > programs and features find offshore Microsoft .NET , click Uninstall/change , and fix it. Then try to install the updates.

  If again get the error follow the steps below

  1 - Download .NET Framework cleanup tool http://blogs.msdn.com/cfs-file.ashx/__key/CommunityServer-Components-PostAttachments/00-08-90-44-93/dotnetfx_5F00_cleanup_5F00_tool.zip and unzip it.

  2. After you have retrieved double click it to open it

  3. in product cleaning select all versions , and then clickclean now

  4 - restart your PC after cleaning ends.

  5. download and install the suite

  Microsoft .NET Framework 3.5 Service Pack 1

  Microsoft .NET Framework 1.1 Service Pack 1

  Microsoft .NET Framework Version 1.1 redistributable package

  Restart your PC and run Windows Update.

  Hope this helps,

• Update for Windows Vista (KB973687) fails to install (Error 80070020), even in save mode and boot clear. How can I install?

  Vista 32-bit SP2
  Norton Internet Security 2010, self-protection and firewall disabled
  FujitsuSiemens Scaleo with Intel Core2 Quad

  Thank you much in advance.

  rh69,
  When you have uninstalled Norton have you used the Norton removal tool?  If this isn't the case, you may want to try this to remove it and then test the updates.  It is also possible that a malware\virus has exceeded Norton.  You should look at this thread and check your system for infections:

  Get rid of malware

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update for Windows 7 (KB2345886) fails to update _

  Update for Windows 7 (KB2345886) fails to update

  Download size: 421 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  Install this update to help strengthen authentication information in specific scenarios. After you install this item, you may have to restart your computer.

  KB2345886 is an OPTION, not the security update. Feel free to hide it.

• Code 80072EE2 error when I try to update the update for Windows Vista (KB972145) tried to install on a week help someone?

  Code 80072EE2 error when I try to update the update for Windows Vista (KB972145) tried to install on a week help someone?

  sweetcheeks,

  0x80072EE2 ERROR_INTERNET_TIMEOUT http://support.microsoft.com/kb/836941/en-us

• Try to install Windows Update to Explorer and get the error code 9 48

  This is the update for Windows Vista - have run microsoft fix and still I get this error - unable to determine what error - is anyone know?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/when-installing-Microsoft-Update-for-Windows/7448c660-0a05-4496-be8f-188a382578f8

  Keine IRB, post twice.

  UTC/GMT is 16:25 Wednesday, May 23, 2012

• I'm trying to download the updates to my computer, but can't. I get the error code 646 and the download fails. I tried to download the update several times, but get the same answer. What is the problem?

  Ideas: I'm trying to download the updates to my computer, but can't. I get the error code 646 and the download fails. I tried to download the update several times, but get the same answer. What is the problem?

  • Pragrams you have problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• try to install update KB981715 and receive the error code 80070663

  tried to install the update and get the error code all the time.  How to install this update

  lindeelou,

  Please post with the information requested here: what to post in the Windows Update forum
  Start with these troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I configure xbox 360 on windows XP, all instructions are for Media Center which I did not and asks the key code.

  Windows XP and using the Xbox 360!

  How can I configure xbox 360 on windows XP, all instructions are for Media Center which I did not and asks the key code.  I don't have media player. I received a key to the xbox code, BUT Media Player do not ask for it? My wireless works fine.  XBox works very well. Yes, I know that I should upgrade to Windows 7 but until my budget allows, is what I have.  Thank you.

  Try this link for XBox: http://social.msdn.microsoft.com/Search/en-US?query=XBOX%20on%20Windows%20XP&ac=3