the wiring of the array of build service

Similar Questions

• How to add the endpoint Builder service windows audio

  I can't start the audio endpoint Builder service windows because it is not in the services folder. How to retsore this service. Reloading windows has absolutely nothing. The windows Fix - It _ jack tool. I'm not interested in a solution for Windows 7, I am running XP

  AWE, that explains that.

  My 'Sounds and Audio Devices Properties' Panel is grayed out and I can't choose my new outboard USB sound card, my volume button is red x ed out.
  Any help?

• No sound, cannot start Windows Audio Endpoint Builder service, RPC server not available

  I had the audio works fine, so I checked a few services that are sure to value manual, and now I have problems with my audio. I went to all the necessary services that should be started and all have the value automatic and running except for the Audio service of builder endpoint, windows audio service and service audio creative.

  When you try to start the audio endpoint Builder service windows I get error 1722: the RPC server is unavailable.

  I can't start the service windows audio either. I get an error 1068: the dependency service or group could start.
  I tried to change the local system account log in info and now I get a different error message: 1079 the account specified for this service is different from the account specified for other services running in the same process.
  I tried to uninstall my sound card drivers (creative audigy 2), my pilots on board her (AC97) then reinstalling both, no chance.

  I am running Win 7 Ultimate 64

  I am also having a problem with my USB keyboard goes dead. the backlight stays on, but none of the buttons will respond. I have to unplug the USB and use it to hold back in order to reinstall. It seems that if I do not use the keyboard for a while it turns off, but the lighting. I disabled in the power of USB energy saving profile, and the problem persists. My mouse does not turn, so I think it is not related to my power profile. It's a keyboard Saitek Gamers (USB).

  Any help would be appreciated.
  Thank you
  Alex

  ETA *.

  DCOM Server process Launcher started, automatic
  Plug-and-Play started, automatic
  Multimedia class Scheduler started, automatic
  Remote procedure call (RPC) started, automatic
  Windows Audio Endpoint Builder not started, automatic (error message 1722)

  Update #2 that I was able to get the right connection info to get rid of the error msg 1079.
  I typed in NT AUTHORITY\LocalService and left the empty password.
  now, I get the same msg of error as a generator of endpoint... RPC server is unavailable.

  Edit # 3
  I turned on the power and everything started working as usual.
  except that I still have the problem of keyboard.
  Thank you

  I guess the problem with the Windows Audio endpoint builder, it's that you have disabled the Windows on Windows 7 power management.  For some reason, the audio services cannot start if power management is disabled.

  I was going to install the software for my UPS APC power management and requires that the Windows power management is disabled.  I disabled the service and rebooted the system and noticed that the audio services is not started.  You try to start their hand gave the errors you mentioned.  When I started the service of power management, I was able to start audio services.

  Microsoft does not mark as services that depend on it, but there is a relationship.  I know that in Windows 7, which they said he optimized use of energy for the audio and I guess audio services are looking at power management to see what type of profile is in use.  Because power management does not work, it is unavailable and terminate the audio services.  Again, this is just a guess, and I can't find definitive answers to this topic.

• An unexpected build error has occurred: index was outside the bounds of the array

  Hello

  I use OPA version 12.1.1 (November 2015 edition of cloud).

  When I try to debug my OPA project I get this error:

  "An unexpected build error has occurred: index was outside the bounds of the array.

  Does anyone of you understand what that means?

  Kind regards

  Xavier M.

  What language / region is your project?

  You are able to apply for service with the support of Oracle?  This error usually requires the investigation of the project to determine the root cause.

• How to get the mobile applications other than phonegap Build Service apk file in Dreamweaver CM³

  How to get the mobile applications other than phonegap Build Service apk file in Dreamweaver CM³

  Dreamweaver is a tool, not an install Android of web authoring tool.

• I do not have 'PhoneGap Build service' tab of the site in the cc of DreamWeaver? What should I do?

  I do not have 'PhoneGap Build service' tab of the site in the cc of DreamWeaver? What should I do?

  Go directly to the website phone Gap building.

  Adobe Build PhoneGap

  DW can't stay with fast cycle updated phone Gap.

  Nancy O.

• Flex Builder detects more errors against the definition of the Array class.

  Hello

  I don't know if this is the right forum to post this problem, but here goes.

  I've been developing an application using Flex Builder 3. Today, I met a strange problem. When I use a table variable in an Actionscript class, the compiler detects more errors against the class definition. I have only encountur this behavior with the Array class. Other classes of higher level, seem to work. F.i. I can insert the following text in a function:

  var a: Array = [1, 2, 3];

  var i: a.Len;

  After construction, I get no error. When I run the application, the variable I is set to 0.

  I tried to clean up the existing project. I created a new project in flex from scratch. The problem remains.

  I did not have any updates lately, f.i. flash player, java,... the development environment has not changed as far as I know.

  Can someone give some advice about this problem? Thank you.

  Kind regards

  Wim.

  The table is a dynamic class, as an object, which means that it is perfeclty happy to return values for properties that have never put. These values will be "undefined", which, when converted to an integer, turn into 0. This is the kind of unfortunate behavior, but there is no way to get around.

• Changing the properties of the individual elements in the array

  In the attached VI, I have a table 1 d of the slider ('Phase Coefficients') controls where each element of the array represents the coefficient in a polynomial of arbitrary order. The problem I have is that the range of slider, I put to the coefficient of the lowest order (element 0 of the array) becomes quickly impossible for one more order coefficients (> 5 elements). Small changes in the highest order coefficients dramtically change the global polynomial.  I want each element/slider to have its own line, but I know that's not strictly possible that each element of a table shares the same properties. I've implemented a work around (use boolean to activate) in which the range of all cursors is set according to which the item is viewed, but my implementation prevents the modification of the range during execution of the VI. Is it possible to adapt my method (or use another method all together) in order to allow different, editable for each slider element ranges?

  Thank you!

  Each element of an array must have the same properties.  They can only differ in value.

  You can have an array of clusters, and each group can have the slider control.  Here, you will be able to regroup a slider with different properties in the cluster build clusters in a table.

• How Labview grab handles in the array?

  I have an array of large 2by2, and I do a lot of travel such as the removal of the top row and add the data to rank the lowest. The size of the array never changes, but I manipulate the data a bit.

  My question is: how Labview manages this manipulation? Is this just smart enough to manipulate pointers rather than copy the values over and over again?

  I'm looking at the interface with the dll, and it would seem that Labview for a 2by2 arry have only a pointer to all the numbers such that the number is simply distributed over a block of memory. Is Labview all done with any size chart? Just store in a large part?

  Thank you!

  d1sturbanc3 wrote:

  I have an array of large 2by2, and I do a lot of travel such as the removal of the top row and add the data to rank the lowest. The size of the array never changes, but I manipulate the data a bit.

  My question is: how Labview manages this manipulation? Is this just smart enough to manipulate pointers rather than copy the values over and over again?

  I'm looking at the interface with the dll, and it would seem that Labview for a 2by2 arry have only a pointer to all the numbers such that the number is simply distributed over a block of memory. Is Labview all done with any size chart? Just store in much?

  Thank you!

  Yes to the most, "depends on" the rest of your questions.

  Operators of memory "inplace" you will work within a single buffer. Some of the normal array operators will do the same (replace the subset of table for example). Build table, no.

  Try to use "tools > profile > buffer Allocations... Show.

  To see where you have additional buffers in your code.

  BTW: The process using «Show the buffer...» "and then rewrite to eliminate is sometimes called"Chase points ".

  Have fun!

  Ben

• Why all the elements of the array does not appear?

  Hello

  I'm learning about the handling of tables.  The example finder includes this one, 'build array_forum.vi', which shows the two modes, concatenate and adding, I understand, HOWEVER, I can't understand how they built this vi.  For example, I can find the Array function to build, but I do not understand how they created the "digital data table 1" "data table 2" digital... etc, and I can't find the functions on the pallets that cause display "build the CONCATENATE entries table". ".  Where are these blue functions?

  Where these functions are found in the palette, and how we build them like that?

  The other vi indicated here, 'for loop array_forum.vi' is my attempt to reproduce, but it doesn't show all the elements of the array; However, it only displays a SINGLE element, the last element of the array.  How can I view all the items in the table I am creating using the FOR LOOP?  I am doing something wrong with the LOOP FOR?

  Thank you

  Dave

  Right-click your scoreboard, uncheck the "Display as icon" and see what happens.  There are two ways of viewing terminals, most of us like the simple point of view, the default value is the display of the icon.

• Is it possible to connect a simple 1 d array to a digital indicator or what would be the best way to display the numeric values of the array on the front panel?

  Is it possible to connect a simple 1 d array to a digital indicator or what would be the best way to display the numeric values of the array on the front panel? Examples or suggestions would be greatly appreciated.

  Thank you

  Tunis

  Thank you Adam, it's originally in a while loop, I placed it in a loop for example, wired County in the for loop and presto, this son of a digital indicator. It works very well. Thanks for the help folks.

• Two-node Rac (11204) Cluster node 1 has failed to stop with error: impossible to get in touch with the loan of cluster service. duty to force stop

  Newly build Production environment (don't use it yet)

  OS: Linux redhat 64-bit 2.6.18

  Cluster version: 11.2.0.4

  This environment clusterware installed last December, we are trying to install oracle RDBMS, so try to first stop the crs.  However on node 1, the v$ asm_diskgroup shows nothing under total_mb /free_mb on diskgroup OCR.  and stop the crs shows: impossible to get in touch with the loan of cluster service.

  Alerts cluster log shows below:

  2014-03-25 03:50:01.429:

  [crsd (8608)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u00/app/11.2.0.4/grid/log/oprd100/crsd/crsd.log.

  2014-03-25 03:50:01.433:

  [crsd (8608)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

  ]. Details at (: CRSD00111 :) in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.)

  2014-03-25 03:50:02.123:

  [ohasd (12490)] CRS - 2765:Resource 'ora.crsd' failed on the server "orpd100".

  2014-03-25 03:50:03.407:

  [crsd (8623)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.

  2014-03-25 03:50:03.411:

  [crsd (8623)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

  The NEWSPAPER of the ASM alerts:

  Wed Mar 25 03:21:49 2014

  WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

  WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

  WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

  WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

  Wed Mar 25 03:21:49 2014

  NOTE: process _b000_ + asm1 initiating (21071) 1.1807368888 disk offline (OCR_0681_2EF4) with mask 0x7e in Group 1

  NOTE: process _b000_ + asm1 initiating (21071) 2.1807368889 disk offline (OCR_0681_2EF5) with mask 0x7e in Group 1

  NOTE: check PST: grp = 1

  GMON seeking ways of disc for Group 1 to 5 pid 27, DiSo 21071

  ERROR: read no quorum within Group: required 2 found 1 records

  NOTE: audit PST grp 1 fact.

  NOTE: start the PST update: grp = 1, dsk = 1/0x6bba42b8, mask is 0x6a, op = clear

  NOTE: start the PST update: grp = 1, = 2/0x6bba42b9 dsk, mask is 0x6a, op = clear

  GMON update modes of disk for the Group 1 to 6 for 27, DiSo 21071 pid

  ERROR: read no quorum within Group: required 2 found 1 records

  Wed Mar 25 03:21:49 2014

  NOTE: disassembly of the cache (not clean) Group 1/0x35AAB27B (OCR_DATA)

  WARNING: For disk offline OCR_0681_2EF4 0x7f mode failed.

  2 node rac cluster is normal.  We were able to stop the crs without force.

  What should I look at to understand what is happening here?

  Thanks to adavnace.

  WARNING: For disk offline OCR_0681_2EF5 0x7f mode failed.

  NOTE: e-mail CKPT suspend pins Unix process pid: 21073, image:

  No default value is 1 M

• Index is outside the bounds of the array - Get-VirtualPortGroup

  Hello

  We have developed a script for virtual network news. For small environment working fine but huge script environment, we get an error message. All entries are appreciated.

  Get-VirtualPortGroup: 19/08/2013 23:01:52 Get-VirtualPortGroup Ind ex was outside the bounds of the array.

  C:\IA\Requests\Request#14 TSRStatus\NetworkHardeningLatest.ps1:21 tank: 40

  + foreach ($VPG in (Get-VirtualPortGroup < < < <-VirtualSwitch $sw)) {$VPG |}

  + CategoryInfo: NotSpecified: (:)) [Get-VirtualPortGroup], ViErro)

  r

  + FullyQualifiedErrorId: Client20_VMHostServiceImpl_GetVirtualPortGroup_B

  yVirtualSwitch_GetPortGroupNames_ViError, VMware.VimAutomation.ViCore.Cmdle

  ts.Commands.Host.GetVirtualPortGroup

  The script is given below

  and {foreach ($sw in (Get-VirtualSwitch-Standard)) {}}

  foreach ($VPG in (Get-VirtualPortGroup - VirtualSwitch $sw)) {$VPG |}

  Select @{N = 'Host'; E = {$sw. VMHost.Name}},

  @{N = 'Switch'; E = {$sw. Name}},

  @{N = 'Promiscuous mode'; E = {if($sw.) {{Extensiondata.Spec.Policy.Security.AllowPromiscuous) {"accept"} Else {"reject"}}},

  @{N = "forged passes";} E = {if($sw.) {{Extensiondata.Spec.Policy.Security.ForgedTransmits) {"Accept"} Else {"reject"}}},

  @{N = 'MAC changes'; E = {if($sw.) {{Extensiondata.Spec.Policy.Security.MacChanges) {"Accept"} Else {"reject"}}},

  @{N = "Portgroup"; E = {$VPG. Name}},

  @{N = "Portgroup Promiscuous mode"; E = {if($VPG.) Extensiondata.Spec.Policy.Security.AllowPromiscuous - eq $null) {if($sw.) Extensiondata.Spec.Policy.Security.AllowPromiscuous) {"accept"} Else {"reject"}} Else {if($VPG.) {{Extensiondata.Spec.Policy.Security.AllowPromiscuous) {"accept"} Else {"reject"}}},

  @{N = "Wrought Portgroup transmitting"; E = {if($VPG.) Extensiondata.Spec.Policy.Security.ForgedTransmits - eq $null) {if($sw.) Extensiondata.Spec.Policy.Security.ForgedTransmits) {"accept"} Else {"reject"}} Else {if($VPG.) {{Extensiondata.Spec.Policy.Security.ForgedTransmits) {"accept"} Else {"reject"}}},

  @{N = 'Portgroup MAC changes'; E = {if($VPG.) Extensiondata.Spec.Policy.Security.MacChanges - eq $null) {if($sw.) {Extensiondata.Spec.Policy.Security.MacChanges) {"Accept"} Else {"reject"}} Else {if($VPG.) {{Extensiondata.Spec.Policy.Security.MacChanges) {"Accept"} Else {"reject"}}},

  @{N = "NoNativeVlan1"; {E = {if ($VPG.vLanID - eq 1) {"accept"} Else {"reject"}}},

  @{N = "NoReservedVlans"; {E = {if (($VPG.vLanID-ge 3968-et $VPG.vLanID-le 4047) - or ($VPG.vLanID - eq 4094)) {"accept"} Else {"reject"}}},

  @{N = "NoVGTvlan4095"; {E = {if ($VPG.vLanID - eq 4095) {"accept"} Else {"reject"}}},

  @{N = "LabelVswitches"; {E = {if (! $vSwitch.Name) {"accept"} Else {"reject"}}}

  }}} | Export CSV C:\Report\Networkreport.csv - NoTypeInformation - UseCulture

  PowerCLI Version

  ----------------

  VMware vSphere PowerCLI 5.1 Release 2 build 1012425

  ---------------

  Versions of the snap

  ---------------

  VMWare AutoDeploy PowerCLI component 5.1 build 768137

  VMWare ImageBuilder PowerCLI component 5.1 build 768137

  VMware vCloud Director PowerCLI component 5.1 build 1012427

  License of VMware PowerCLI component 5.1 build 669840

  VDS's VMware PowerCLI component 5.1 build 1012428

  VDS from VMware vSphere PowerCLI component 4.1.1 build 000001

  VMware vSphere PowerCLI component 5.1 build 1012428

  Thank you

  I tweaked the script a bit. Now I get the data with all the errors... Thank you for your contributions. :))

  Data #Network table

  $NetworkData = @)

  {ForEach ($VMHost in Get-VMHost)

  $Esx = get-view-Id $VMHost.id

  {ForEach ($vSwitch to $Esx.Config.Network.Vswitch)}

  ForEach ($PortGroup in ($Esx.Config.Network.Portgroup | where {$_.})) (({Vswitch eq - $vSwitch.Key})) {}

  $NetworkItems = "" | Select VC, host, vswitchname, PromiscuousMode, PGPromiscuousMode, Forgedtransmit, MacChanges, Portgroup.

  PGForgedTransmits, PGMACChanges, NoNativeVlan1, NoReservedVlan, NoVGTvlan4095, LabelVswitches

  $NetworkItems.VC = $vCenterInstanceName

  $NetworkItems.Host = $VMHost

  $NetworkItems.vswitchname = $vSwitch.Name

  $NetworkItems.PromiscuousMode = & {if($vSwitch.Spec.Policy.Security.AllowPromiscuous) {"accept"} Else {"reject"}}

  $NetworkItems.Forgedtransmit = & {if($vSwitch.Spec.Policy.Security.ForgedTransmits) {"accept"} Else {"reject"}}

  $NetworkItems.MacChanges = & {if($vSwitch.Spec.Policy.Security.MacChanges) {"accept"} Else {"reject"}}

  $NetworkItems.Portgroup = $PortGroup.Spec.Name

  $NetworkItems.PGPromiscuousMode = & {if ($PortGroup.ComputedPolicy.Security.AllowPromiscuous - eq $null) {if($vSwitch.Spec.Policy.Security.AllowPromiscuous) {"accept"} Else {"reject"}} Else {if($PortGroup.ComputedPolicy.Security.AllowPromiscuous) {"accept"} Else {"reject"}}}

  $NetworkItems.PGForgedTransmits = & {if ($PortGroup.ComputedPolicy.Security.ForgedTransmits - eq $null) {if($vSwitch.Spec.Policy.Security.ForgedTransmits) {"accept"} Else {"reject"}} Else {if($PortGroup.ComputedPolicy.Security.ForgedTransmits) {"accept"} Else {"reject"}}}

  $NetworkItems.PGMACChanges = & {if ($PortGroup.ComputedPolicy.Security.MacChanges - eq $null) {if($vSwitch.Spec.Policy.Security.MacChanges) {"accept"} Else {"reject"}} Else {if($PortGroup.ComputedPolicy.Security.MacChanges) {"accept"} Else {"reject"}}}

  $NetworkItems.NoNativeVlan1 = & {if ($PortGroup.Spec.VLANID - eq 1) {"accept"} Else {"reject"}}

  $NetworkItems.NoReservedVlan = & {if (($PortGroup.Spec.VLANID-ge 3968-et $PortGroup.Spec.VLANID-le 4047) - or ($PortGroup.Spec.VLANID - eq 4094)) {"NonReject"} Else {"true"}}

  $NetworkItems.NoVGTvlan4095 = & {if ($PortGroup.Spec.VLANID - eq 4095) {"NonReject"} Else {"reject"}}

  $NetworkItems.LabelVswitches = & {if (! $vSwitch.Name) {"NonReject"} Else {"reject"}}

  $NetworkData += $NetworkItems

  }}}

  #Export CSV spreadsheet data. Ensure that the directory already exists

  $NetworkData | Export-Csv - NoTypeInformation - UseCulture-Path "C:\TSRReport\$($FileName).

• "Index was outside the bounds of the array"

  Hello

  I installed ESXi to my home server to test and get to know the software, but I ran into a problem.

  When I try to deploy a new virtual machine or to change the settings, I get a message saying "Index was outside the bounds of the array".

  I have no problem from vSphere, creating a new data store and so on.

  But the funny thing is, when I try another account that I have no problem...

  At the moment I have installed:

  ESXi

  version 4.0.0

  Generation 5044850

  vSphere

  version 4.0.0

  Generation 496403

  vSphere is installed on a computer, Windows 8.

  And the logfile viclient says:

  2013-07-21 16:55:33.103 [viclient:SoapTran] invoke Start 38, RetrieveContents on PropertyCollector: ha-property-collector [10.0.0.250]. [Appellant: VirtualInfrastructure.PropertyRetriever.InvokePropertyGet]

  [viclient:SoapTran] 2013-07-21 16:55:33.118 invoke RetrieveContents on PropertyCollector 38 finish: ha-property-collector [10.0.0.250] - series: 0.001, server: 000.024

  [: ShowExcp] 16:55:35.879 2013-07-21 System.IndexOutOfRangeException: Indeksen var utenfor matrisegrensen.

  ved VMware.CustomControls.NumericUpdownEx... ctor()

  ved VMware.CustomControls.DiskCapControl.InitializeComponent)

  ved VMware.CustomControls.DiskCapControl... ctor()

  ved VpxClient.VMConfig.BWzVDiskCapPage.InitializeComponent)

  ved VpxClient.VMConfig.BWzVDiskCapPage... ctor (TocWizard myBoss)

  ved VpxClient.VMConfig.NWz... ctor (NWzModes m)

  ved VpxClient.Common.UiCommands.VirtualMachine.NewOrImportVM (import Boolean, forceVmtn Boolean, entity, Service iService ManagedEntity)

  Stack trace:

  at VirtualInfrastructure.Utils.Log.Trace (String, String, traceCategory)

  to VpxClientCommon.Util.Dialogs.ShowException (IWin32Window, String, Exception)

  at VpxClientCommon.Util.Dialogs.ShowException (Exception)

  VpxClient.Common.UiCommands + VirtualMachine.NewOrImportVM (ManagedEntity, Boolean, Boolean)

  at VpxClient.GettingStarted.HostHtmlView.CreateVM)

  ...

  at System.Windows.Forms.Application.Run)

  concerning

  Thomas Isaksen

  Hello

  Have you checked this post?

  Re: An internal error has occurred in the vSphere Client. Details: Index was outside the bounds of the array.

  Kind regards

  Julien.

• How to publish a report created by the Oracle Report Builder

  Hello world
  
  My colleague and I have tried to use the Oracle Report Builder to replace our existing report builder of our ERP system. We have already created the report in Report Builder from the suite of development.
  
  What we are looking for is a similar solution such as Microsoft reporting services;
  (1) create models of corporate report
  (2) and then download the template files to a location (for example, the folder on the server)
  (3) then all users in the company can access it through a web browser with a few fields which they can enter certain critiria (e.g. order number).
  (4) then send it to the printer and print out must stand exactly as the model.
  
  
  Unfortunately, we had very hard time trying to find out what it takes and how to publish this report in Oracle we have created. We spent 15 hours on it, but no results.
  
  15 hours we tried to install the 'Oracle' service, but finally, my colleague said that it was not what we are looking for you, "report Oracle service" is used to the error of the hosted application on the server, not to publish the report of company created by the "Oracle report bulider.
  
  
  We use Oracle Database 10 g for the LES quite a long time already. We had setup the Oracle Developer and the installed Application Server.
  
  Could someone tell us please what kind of service Oracle we are looking actually. Other guides any suggestion and installation are also the most welcoming.
  
  
  Best regards
  Bryan

  Hello

  If you want to be able to run your reports on the web, the best solution is to use the 'Oracle Application Server'

  http://www.Oracle.com/technology/software/products/IAS/htdocs/101202.html

  For example, the stand-alone edition of 'forms and reports Services '.

  Then, use the reports Servlet to submit applications for running a report server:

  http://download-UK.Oracle.com/docs/CD/B14099_17/bi.1012/b14048/pbr_run.htm
  Application server Oracle® reports Services publishing reports to the Web
  10g Release 2 (10.1.2)
  B14048-02

  13 queries in race report

  http://www.Oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwwhthow/HOWTO/runPrint/deploy_rpt.htm
  Deploy a report

  Concerning