3D Pinball game will not start wll leave automatically after 2 seconds

Similar Questions

• Satellite Pro L10 will not start - green turns off after 3 seconds

  Hello

  Having a L10 (PSL15E-01J018EN) and when you press the button, the led ON / STANDBY on the front lights up green for about 3 seconds and then past off the coast. It accomplishes this task for the sector or on battery and there is no other life. Anyone know what may be the problem?

  Thank you

  Melv

  Hello Melv

  Remove the battery, connect your laptop to the power adapter only and try to turn on the L10. If this lets wait a few minutes and put the battery in place and watch if the laptop works as usual.

  Please let us know exactly what is happening.

• I get error code0x000000E3 on my other computer. Will not start at all. After seconds tick I get a blue screen. You have a difficulty? I noticed that I'm not the only one with this problem

  This computer is used by my son.  He said that began after you sent an upgrade.

  amatgo,
  Begin by trying things in this thread.  Let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• IPOD will not start power over

  My ipod touch will not start after as I hold down the power button / stop for 10 seconds; other on my ipod touch for 10 seconds, at the same time & release button with no luck.

  Any other way to get the iPod touch to start or turn it on?   Who sets the ipod touch?  A centre of repair or store for ipod touch?   What are the costs of repair.

  Try the remaining shares of:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• Portege 3500 will not start up disk

  Hello

  I recently acquired the laptop above. I decided that I would try to reconstruct it, bad idea.
  I don't have an external CD or recovery CD but I have another laptop and a Windows XP CD.

  I removed the HARD drive the 3500 and put it in my other laptop. I formatted the drive and installed windows. Everything worked Ok and good boots in my other laptop. When I put the disc in the 3500 however, it will not start. All I see is a black screen, not even a cursor or any error.

  I tried to format the drive again and the sys'ing, it does not work. I tried installing on my other laptop then continue on the 3500 but that doesn't work either.

  I was wondering if the 3500 was looking for a partition that I deleted. I don't see why it will not start when start up ok in my other laptop HARD drive.

  Someone at - it ideas?

  Thank you
  Simon

  I don't think that this has nothing to do with the score. You get the black screen, because the other laptop is quite different installed on Windows ACPI etc.
  If you have a usb floppy drive try this:
  1 partition and format the disk with Fat32 (or fat 16).
  2. from your installation CD copy the i386 on the partition directory (attach the HARD drive to another laptop)
  3. start the P3500 leave a floppy disk bootable BACK, change to the I386 directory and start the winnt.exe

• iMac will not start. From sound and sometimes Apple, but no further details. How can I get?

  Just got an iMac and it will not start up.  I can get the sound start and, sometimes, the Apple logo, but it stops there.

  Have tried to use 'command-option-P-R' together. Have you tried "D".  Tried "control C".  Are there other possibilities that I could try?

  Install or reinstall OS X from scratch

  Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Erase the drive:

  1. select in the main menu disk utility and click on the continue button.

  2. once the charges of THE select your boot volume (usually Macintosh HD) in the

  list on the left. Click on the Erase tab in the main window of THE.

  3. set the type of format Mac OS extended (journaled). If necessary, click

  Security and button all the option data from scratch in a single pass. Click

  the clear button and wait until the process is complete.

  4 leave FROM and return to the main menu.

  Reinstall OS X: Select reinstall OS X and click on the install button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible

  because it is three times faster than wireless.

  This should install the version of Mac OS X that you had installed it.

  If this does not work then your hard drive has failed and must be replaced. Please make an appointment at the Apple Store - Genius Bar store and bring it into service. If you are in the United States or is unable to make an appointment in this way, contact your Apple store.

• Satellite A40 will not start or start the BIOS

  Hello

  I have a portable Satellite A40 2 days ago decided to turns off while I was on the internet, and now it does not restart. I tried removing the battery and leave overnight, but it still will not start. When give you it power outlet, the AC LED is green and if you press the button power turns on the green power light, but that's all, the HARD drive light does not illuminate, the fan does not come on, no sound from the HARD drive and nothing on the screen, not even the backlight. You can also feel the heatsink gets hot (without excess however)

  If you insert a CD, you can here read the disc, and find things out there, too, now the power button still cut off the laptop.

  If anyone has any advice on what may be the cause, or any way I can get the machine to reboot again, that would be greatly appreciated.

  Hello

  Have you tried to connect the laptop to the external monitor to check if pictures or anything else appears on the second monitor?

  Your description sounds like the malfunctioning of the internal display, but it is only a suggestion and a few trials are required to obtain a diagnosis right.

• Dv7 ENVY: ENVY dv7 will not start

  ENVY laptop computer dv7 will not start. It passes through the start-up phase, but when the office arrives, it shuts down and office back again, again, again, again, etc. never stops trying to load the desktop.

  Hello

  Try the following.

  Stop of the laptop and leave it like that for 10 seconds.

  Tap here to f11 as soon as you press the power button until you see a message "Windows is loading.

  On the next screen, select your Keyboard Layout and on the next screen, select Troubleshooting.

  Select 'Advanced Options', and then select System Restore.

  Click on yourcurrent system O and then wait as the system restore window opens.

  Pick a point to restore at least 48 hours before that this problem occurred first and then proceed with the system restore.

  Kind regards

  DP - K

• When you try to install Windows XP I deleted some unwanted partitions on my hard drive and now my computer will not start.

  original title: file system

  Finally, I tried to install a new xp on my pc, I had to remove some unwanted parttions and trying so I deleted some system files and its caused me

  problems with my laptop will not start again.

  I try to boot from a cd, but it keep posting so tat files cannot be copied. to restart and boot from the system itself is not also possible.

  I got a copy of my xp on a USB but I can't get my laptop to boot from it

  I need help badly thanks

  pc files cannot copy

  Cannot copy the Office

  Win87.em

  Win_dos-chm

  Windows.hlp

  WinHelp.exe

  WinHelp.hlp

  wininstP.chm

  WMIC.chm

  wmifltrlW.chm

  wmiscmgr.dll

  windW.chm etc.

  Sonyvaio11, xp professional

  Hello

  not all motherboards were Boot from USB active

  Make sure to set the ot of CD/DVD drive USB key to be 1st in the boot order to boot from the XP disc

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  How to clean install XP

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  ___________________________________________________________

  Here is the vista forums

  Try the forums xp on the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• Pane Windows will not start! Help please!

  I have no idea what exactly happened, but my sidebar will not start. I try to click on it through programs and all he will say is that this windows sidebar has stopped working. a problem caused the blocking of the work programme. Windows will close the program and notify you if a solution is available. I get the same message every time I try to click on run as administrator. I tried so many things, but nothing seems to work. Is it possible that I could reinstall or something? It has been so frustrating. Help!

  Hello

  If you have tried all THE above so it looks like you have a corrupted profile.

  Try these to erase corruption and missing/damaged file system repair or replacement.

  1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  3. then run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then do-, use the hidden administrator account for the lowering your user account (the lowest level)
  APPLY/OK, then go back and reset it to the Admin APPLY/OK - this clearly allows corruption. To do this
  a couple of times. Do the same for other accounts that may be difficult. Then, if necessary, you
  can also reset your password in the accounts. Do not forget to leave your account administrator
  and others to the desired level.

  Make another Admin account with your password and use it to fix the others if necessary.
  (just to fix it with, do not use regular account, a safety valve) Always keep a spare part
  ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the command Admin account hidden from the prompt here if
  necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you can't access your old account that you need then you can always use an Admin to migrate
  towards a new (remember to always leave an Admin account that is not used except for a test
  and fix).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Hope this helps

  Rob - bicycle - Mark Twain said it is good.

• Why my games will not play on my computer

  Why my games will not play on my computer. they will load and turns on, but after so many seconds, the game closes out.why is it?

  Hello

  1 you get an exact error message when loading the game? In the affirmative, please let me know the exact error code.

  2. What is the brand and model of your computer?

  3. What games you are not able to play on your system?

  4. have you been able to play the games on your system in the past? If Yes, what did the problem start and have you made any hardware or software changes recently?

  5. you tell on online games or games that are installed on your system?

  If the problems are with the games online, update your flash player. Click on the link given below to update:

  http://get.Adobe.com/flashplayer/

  If you are not able to play the games installed on your system, try the following methods and let me know if that helps you:

  Method 1:

  Try now to the KB article to perform the clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/929135

  WARNING: After you have used the clean boot in order to solve your problem follow step 7 to reset the computer to start as usual.

  Method 2:

  Check if you are facing the similar question in safe mode.

  To start your computer in safe mode through the article mentioned below

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

• Sidebar.exe will not start

  Hello, Microsoft community.

  My problem is, sidebar.exe will not start. He does not appear in the Manager of tasks and does absolutely nothing when I run the executable file.

  I have a new laptop, just installed Windows 7 Ultimate 64 - bit on it. Now, here's what I just did after installing Windows:
  1 remove some windows components:

  -IE

  -Windows media center

  -Games

  -Tablet components

  2 installed all updates and drivers needed

  3 optimized for SSD Windows (I installed on the SSD and HDD extra for Windows files):
  -moved my user on an internal HARD drive folders
  -off hibernazation
  -a rejected the files on the system drive for the content index
  -Move page file of SSD to HDD

  -people with disabilities Prefetch and Readyboot

  To solve the problem, I tried (I rebooted after each operation):

  -running sfc/scannow (says it fixed a few errors, but eventually I saw no changes)

  turn the component Windows Gadgets

  -in the course of running sidebar.exe administrator

  -installation of hotfix (http://support.microsoft.com/kb/979164) - said that it is not compatible with my setup.

  I really hope that the information is more than enough and can someone help me solve the situation.

  Hello

  Glad to know that you were able to resolve the question and thank you for sharing the information with us. For more information on this update, see Microsoft KB article:

  The fix it solution described in this section is not designed to be a replacement for any security updates. We recommend that you always install the latest security updates. However, we offer this fix it solution as an option for workaround for some scenarios.

  MS13-038: Internet Explorer security update: May 14, 2013

  http://support.Microsoft.com/kb/2847204/en-us

  Thank you and best regards,

  John

• Chronic problem - Mahjong Titans will not start

  273 messages
   
       
  Chronic problem - Mahjong Titans will not start

  For several days, when I try from Win 7 of Mahjong Titans games, all I get is a brief hourglass and then nothing.

  I tried a boot minimum without result, off and then turn on the Mahjong, run sfc/scannow, memtest and after all this still the same short hourglass and then nothing.

  Here's the same last log. Maybe he can help find the problem. I hope of course.

  Thank you very much.

  Log name: Application
  Source: Application error
  Date: 14/11/12 14:22:38
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: primary
  Description:
  Name of the failing application: Mahjong.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc9f5
  Name of the failed module: Mahjong.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc9f5
  Exception code: 0xc0000005
  Offset: 0 x 0000000000029425
  ID of the process failed: 0 x 870
  Start time of application vulnerabilities: 0x01cdc29d68531b40
  The failing application path: C:\Program Files\Microsoft Games\Mahjong\Mahjong.exe
  Path of the failing module: C:\Program Files\Microsoft Games\Mahjong\Mahjong.exe
  Report ID: a645a0d8-2e90-11e2-8026-0022686b32ff
  The event XML:
  
   
     
      1000
      2
      100
      0 x 80000000000000
     
      93552
      Application
      Primary
     
   
   
      Mahjong.exe
      6.1.7600.16385
      4a5bc9f5
      Mahjong.exe
      6.1.7600.16385
      4a5bc9f5
      c0000005
      0000000000029425
      870
      01cdc29d68531b40
      C:\Program Files\Microsoft Games\Mahjong\Mahjong.exe
      C:\Program Files\Microsoft Games\Mahjong\Mahjong.exe
      a645a0d8-2e90-11E2-8026-0022686b32ff
   
  

  273 messages
   
       

  The fixed!
  It was too simple.

  Not an answer as to what caused the problem or how to fix. I just copied the folder Appdata Mahjong since one my laptop at the place right on the offending machine.

  All is well now.

  Thanks anyway.

• Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running.

  Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running. I can't enter to give more details. Can anyone help? There are a load of work due to deliver to the printing press Monday

  Have you tried to boot from the Partition Recovery and repair then the disc from there, using disk utility?

• G5 will not start. LED light on. Fans before working.

  Early 2005 G5. running 10.5.8.

  G5 will not start. LED light (no flashes not but solid). Fans before working. Rear fans blowing not. Cleaned up the dust. A exploded during a down and will not restart. Any thoughts? Is that a bad diet? What I would do. Thanks for any help. I love this old computer and hope to keep fixed and working.

  Sam

  Some of the fundamental things include the pram/clock battery replacement

  since they may be dead; then with a power failure, sometimes the Mac

  do not restart. Usual power management unit & reset NVRAM/PRAM are

  methods that sometimes also used as a troubleshooting measure.

  • Reset the Mac chip power management: (see SMU)

  http://www.thexlab.com/FAQs/resetpmchip.html

  • How to reset NVRAM-LANDAU on your Mac - Apple Support

  A hard reset can sometimes be used, where the power is disconnected

  the logic board and power removed from grill; Then push the Start button / stop.

  (But maybe not. Several PowerMac computers, I had, some people found this helpful)

  You may also remove and reposition cards and other items

  the inside of the case, to be sure they are connected properly. Be sure to not

  In short anything, due to the static load or residual power in the circuits.

  The hour is late here, so I'm not going offline; If all goes well a battery original or novel, etc.

  can help to put it on again. Also sometimes the power supply has some faulty fans,

  circuits or capacitors, so they can be troublesome to repair or replace.

  Good luck in this case!